The ai-plan-checker.ts was passing the prompt directly as a shell argument,
which can cause E2BIG errors when the terminal buffer is large (8KB+).
This fix applies the same temp file approach already used in ai-idle-checker.ts:
- Write prompt to a temp file instead of passing as shell argument
- Pipe the file to claude via stdin: `cat prompt.txt | claude -p ...`
- Clean up prompt file after check completes
Also fixes a race condition in the cancel() method of both AI checkers where
the poll timer could fire between setting checkCancelled and clearing timers.
Now timers are cleared before resolving the promise to prevent this race.
Includes test utilities and analysis documents for the respawn controller
created by other agents:
- test/respawn-test-utils.ts - MockSession, MockAiIdleChecker utilities
- test/respawn-analysis.md - Code analysis and issue identification
- test/respawn-scenarios.md - Test scenario documentation
- test/respawn-test-plan.md - Testing architecture documentation
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- persistSessionState() now saves respawnEnabled based on config.enabled
(user intent) instead of controller.state (running state)
- cleanupSession() saves respawn config BEFORE removing controller
- AiIdleChecker and AiPlanChecker constructors filter undefined values
to prevent overwriting defaults (fixes "timed out after undefinedms")
- updateConfig() methods also filter undefined values
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
When respawn config objects had explicit undefined values for fields like
aiIdleCheckTimeoutMs, the spread operator would overwrite defaults with
undefined, causing "AI check timed out after undefinedms" errors.
- Add default fallbacks when saving pre-config in server.ts
- Filter out undefined values before spreading in RespawnController
- Add tests verifying undefined filtering works correctly
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add restoreTokens() method to Session class for recovery after restart
- Add GlobalStats type for cumulative usage tracking across all sessions
- Accumulate tokens from deleted sessions into global stats
- Track lifetime session count with incrementSessionsCreated()
- Add /api/stats endpoint for global stats
- Include globalStats in /api/status response
- Frontend shows aggregate tokens + cost in header
- Fix respawn controller config to filter undefined values
- Add 7 new tests for global stats functionality (v0.1343)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The AI idle checker was passing the prompt (including up to 16KB of terminal
buffer) as a command-line argument to bash -c, which exceeded the Linux
argument size limit causing "spawn E2BIG" errors.
Now writes the prompt to a temp file and pipes it to claude via stdin,
avoiding the argument size limit entirely. Temp file is cleaned up both
in the normal case (by the shell command) and on cancellation/timeout.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add state check in startPlanCheck() to prevent Enter if state changed
- sendAutoAcceptEnter() now cancels pending AI idle checks and resets state
- Log auto-accept as [command] type for visibility in action log
- Highlight command entries with blue background in action log
- Show action log row when there are actions (not just timers)
- Increase action log height and opacity for better visibility
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add 100ms delay between text and carriage return to prevent race conditions
- Add retry logic (up to 3 attempts) for carriage return with increasing delays
- Trim trailing whitespace from text to avoid spurious spaces
- Better error logging for debugging input delivery issues
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- State label now white on green pill for better visibility
- AI check shows detailed status with color-coded badges:
- Blue: Analyzing terminal output
- Green: Idle confirmed
- Yellow: Working detected
- Gray: Disabled
- Shows time since last check when recent (<2min)
- Bump version to 0.1338
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Respawn banner changes:
- Human-friendly state labels (e.g., "Kickstarting..." vs "waiting_kickstart")
- Removed redundant "→ waiting for" text
- Simplified AI check display (only shows when actively checking)
- Shorter cycle counter (#1 vs "Cycle 1")
- Fixed NaN timer bug with validation
- Flatter HTML structure
CLAUDE.md improvements:
- Reorganized Commands section into clear subsections
- Test port allocation in table format
- Simplified TypeScript config section
- Removed duplicate keyboard shortcuts (already in README)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add version 0.1337 to project overview
- Add keyboard shortcuts section for web UI (Ctrl+Enter, Ctrl+W, etc.)
- Add teardown timeout (60s) and coverage excludes to test comments
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Display version number in center of bottom toolbar
- Load version from package.json via server's /api/status
- Version shown on initial load and SSE reconnect
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Fix "enable twice" bug: add enabled:true to getModalRespawnConfig()
- Add timer tracking with countdown display in respawn banner
- New events: timerStarted, timerCancelled, timerCompleted, actionLog
- Show active timers with progress bars and recent action log
- Skip remaining timeouts after AI check returns IDLE/WORKING verdict
- Enhanced DetectionStatus with activeTimers, recentActions, currentPhase
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Adds a two-stage gate before auto-accepting plan mode prompts:
1. Strict regex pre-filter - checks for numbered options + selector
2. AI confirmation - spawns Opus to classify as PLAN_MODE or NOT_PLAN_MODE
This prevents spurious Enter key presses when Claude is paused mid-thought
or experiencing network lag, rather than showing a plan approval prompt.
New files:
- src/ai-plan-checker.ts: AI checker following ai-idle-checker.ts pattern
Config fields added to RespawnConfig:
- aiPlanCheckEnabled (default: true)
- aiPlanCheckModel (default: claude-opus-4-5-20251101)
- aiPlanCheckMaxContext (default: 8000)
- aiPlanCheckTimeoutMs (default: 60000)
- aiPlanCheckCooldownMs (default: 30000)
New events: planCheckStarted, planCheckCompleted, planCheckFailed
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Two bugs fixed:
1. Respawn controller got stuck after AI check returned WORKING/ERROR.
The pre-filter and no-output timers fired once but were never restarted,
leaving the controller in a dead 'watching' state with no retry mechanism.
Now restarts both timers after any non-IDLE AI check result and on
cooldown expiry. Also seeds the controller's terminal buffer from the
session's existing output so the first AI check has context.
2. AI idle checker couldn't find the claude binary in restricted environments
(systemd service). The spawned screen ran `claude -p` without PATH
augmentation. Now exports getAugmentedPath() from session.ts and prepends
it in the AI checker's bash command.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The header-system-stats had its own border-left in addition to the
header-right border-left, creating two vertical lines. Removed the
inner one for a cleaner look.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Reduce header-right gap from 1rem to 0.5rem and remove margin-left
from notification button for tighter grouping.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Replace gear emoji with SVG icon matching the bell, remove extra margin
between them, and ensure both sit at the same vertical position.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Condense CLAUDE.md by moving detailed state machine diagrams and spawn
protocol specs into docs/respawn-state-machine.md and docs/spawn-protocol.md.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Use an inline SVG bell that inherits currentColor, matching the gray
monochrome style of the settings gear icon.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Moved the notifications section to the first position under "What Claudeman Does"
and renamed it to "Notification System" for better visibility.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Default KillMode=control-group kills all processes in the cgroup,
including spawned GNU screen sessions. KillMode=process only kills
the node server, allowing screens to survive restarts and be
reattached via reconcileScreens().
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
attachCustomWheelEventHandler doesn't exist in xterm.js 5.3.0,
causing initTerminal() to crash and abort all app initialization.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Claude's Ink UI enables terminal mouse reporting, causing xterm.js to
forward wheel events to the application. This made scrolling up to read
the plan impossible. Intercept wheel events to always scroll the terminal
viewport directly.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Split the session options modal into three tabs (Respawn, Context,
Ralph/Todo) to reduce vertical height. Removed redundant header and
border from the Respawn section. Also condensed CLAUDE.md and added
AI idle checker documentation.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Replace the "Worked for Xm Xs" pattern as the sole primary idle
detection signal with a final AI-powered check. When pre-filter
conditions are met (output silence, no working patterns, tokens
stable), a fresh Claude CLI session is spawned in a screen to
analyze terminal output and provide a definitive IDLE/WORKING
verdict before proceeding with the respawn cycle.
New state in state machine: `ai_checking` (between pre-filter
confirmation and `sending_update`). WORKING verdict triggers a
3-minute cooldown. Errors auto-disable after 3 consecutive
failures, falling back to the existing noOutputTimeoutMs safety net.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Document the PATH augmentation behavior in PTY spawn modes, data flow,
screen-aware sessions, and requirements sections. Clarify that claude
does not need to be in the server's PATH as it's auto-discovered.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The previous fix used absolute paths to spawn claude, but the CLI itself
checks if its directory is in PATH and warns if not. Instead, find where
claude is installed and prepend its directory to PATH in the spawn
environment. This ensures both execvp resolution and Claude's own PATH
check are satisfied.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
When the web server runs in environments where `claude` isn't in PATH
(e.g., systemd services, non-login shells), node-pty's execvp(3) fails
with "No such file or directory". Fix by resolving the absolute path
to the claude binary using `which` with fallback to common installation
locations (~/.local/bin, /usr/local/bin, etc.). The resolved path is
cached for performance.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- CLAUDE.md: idle detection cancellation on substantial output, API input
limits table, configure() method on RalphTracker, tighter completion
pattern description
- ralph-wiggum-guide: add configure() to tracker methods table
- Both docs: update Last Updated date to 2026-01-24
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- ralph-tracker: add ✓ to native todo pattern + pre-check, add configure() method
- session: remove stale message expectation from interactive endpoint test
- buffer-management: fix trim count expectations (1202 items triggers second trim)
- cli-commands: replace non-existent toStartWith with toMatch regex
- edge-cases: update error expectation for session-not-found on respawn config PUT
- ralph-integration: respawn config PUT without controller now saves as pre-config
- session-state: fix debouncer shouldFlush(0) - pass timestamp >= delayMs
- timing-utilities: attach catch handlers before advancing fake timers
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- task.ts: Cache completion phrase regex in constructor instead of
re-creating on every checkCompletion() call. Add escapeRegex helper
for safe RegExp construction from user-provided phrases.
- ralph-tracker.ts: Remove commented-out COMPLETION_SIGNAL_PATTERN
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The hook commands now read stdin JSON from Claude Code (contains tool_name,
tool_input, etc.) and forward it as the data field to the API. This enables
richer notifications showing actual context (e.g., "Bash: docker push prod").
Previously the curl commands only sent event type and session ID, losing
all hook context data.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Three improvements to prevent the respawn controller from sending update
prompts while Claude is still working:
1. Tighten COMPLETION_TIME_PATTERN to require "Worked for" prefix, avoiding
false positives from bare time durations in regular text (e.g., "wait for 5s")
2. Increase completionConfirmMs default from 5s to 10s - Claude regularly
pauses 5-8s between tool calls and during thinking
3. Cancel confirming_idle state when substantial output arrives (stripped of
ANSI codes), instead of passively relying on the timer to self-restart
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The server was dropping the `data` field from hook-event POST requests,
so notifications always showed generic messages. Now forwards tool name,
command, question text, and reason to the frontend.
Notifications now show:
- permission_prompt: "Bash: docker push prod:latest"
- elicitation_dialog: "Merge PR #42 to main?"
- idle_prompt: custom message if provided
- stop: reason if provided
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add scripts/claudeman-web.service: respawning systemd user service
for `claudeman web --https` (Restart=always, RestartSec=5)
- Slow tab blink animations: red 1s→2.5s, yellow 1.5s→3.5s
with ease-in-out and reduced opacity for less aggressive feel
Install: symlink to ~/.config/systemd/user/, enable, start
Linger: loginctl enable-linger keeps it running after logout
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Red blink for action-required events (permission_prompt, elicitation_dialog)
- Yellow blink for idle sessions (idle_prompt)
- Alert clears when user clicks the tab or session starts working again
- Only blinks non-active tabs (active tab is already visible)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Three issues fixed:
- Default browserNotifications to true (was false, never fired)
- Remove tab-visibility gate for critical/warning notifications
(monitoring dashboard should alert regardless of tab focus)
- Auto-request Notification permission on first attempt instead of
silently failing (re-sends the notification after permission granted)
- Migrate existing localStorage prefs from v1 default (false → true)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
switchToSession didn't exist - was calling a nonexistent method.
Changed to selectSession which actually switches the active tab and
loads the terminal buffer. Also enhanced browser push notifications
to navigate to the session when clicked (previously only focused window).
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add hook:elicitation_dialog SSE handler in frontend (critical urgency)
- Add Desktop Notifications section to README with hook event table
- Add hooks API endpoint to README API reference
- Update CLAUDE.md SSE events and API routes for elicitation_dialog
- Add session log entry for hooks feature
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The auto-accept feature was too aggressive - it would press Enter for any
silence without a completion message, including AskUserQuestion prompts.
Now uses the elicitation_dialog notification hook to detect when Claude is
asking a question, and blocks auto-accept in that case. Only plan mode
approvals (silence with no completion message AND no elicitation signal)
trigger auto-accept.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Wire Claude Code's official hooks system (Notification, Stop) to POST
back to Claudeman's new /api/hook-event endpoint, which broadcasts SSE
events consumed by the existing NotificationManager for desktop alerts.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Notification prefs are now included in the PUT /api/settings payload
and stored in ~/.claudeman/settings.json. On page load, server-stored
prefs are loaded as fallback when localStorage is empty (e.g. new
browser or cleared cache).
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Also closes the notification drawer if it was open when the user
disables notifications in settings.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Enables the Web Notifications API when accessing via SSH tunnel or
non-localhost URLs. Self-signed cert is auto-generated with openssl
and stored in ~/.claudeman/certs/ for reuse across restarts.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Integration tests create screen sessions via the web server, but
server.stop() intentionally preserves them (for reattachment in
production). This left 30+ detached screens after each test run.
Fix by recording pre-existing screens in beforeAll, then killing any
new detached claudeman-* screens in afterAll that weren't there at
test start. Never kills attached sessions (user's active work).
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
After loading the terminal buffer on tab switch, xterm.js wasn't
guaranteed to be scrolled to the bottom, requiring users to manually
scroll down. Fix by:
1. Adding scrollToBottom() after chunkedTerminalWrite completes
2. Adding scrollToBottom() after terminal.focus()
3. Delaying chunkedTerminalWrite resolution by one extra rAF to ensure
xterm.js has finished rendering the final chunk
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Instead of parsing terminal output for <spawn1337> tags, spawn capabilities
are now exposed as native MCP tools that Claude Code can call directly.
The MCP server (stdio transport) proxies requests to the existing REST API.
- Add src/mcp-server.ts with 6 tools: spawn_agent, list_agents,
get_agent_status, get_agent_result, send_agent_message, cancel_agent
- Remove src/spawn-detector.ts and all references in session.ts/server.ts
- Add CLAUDEMAN_API_URL env var propagation to sessions and screens
- Write .mcp.json to case directories during creation
- Remove spawn1337 tag documentation from case-template.md
- Add claudeman-mcp bin entry to package.json
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
New sessions had no awareness of the spawn1337 agent protocol because
the case-template.md (copied as CLAUDE.md into every new case) was
missing the documentation. Added full spawn protocol reference including
tag syntax, task spec format, monitoring commands, and resource limits.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The w1/w2/s1/s2 session counter was scanning all sessions regardless
of case name, causing cross-case number inflation. Now only counts
sessions belonging to the same case when determining the next number.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Ralph tracker no longer auto-enables on pattern detection. It must be
explicitly enabled per-session (via API) or globally via the new
`ralphEnabled` AppConfig setting. Adds GET/PUT /api/config endpoints
for runtime configuration. Spawn agent ralph enable is unchanged.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Add chmod +x after tsc compilation to prevent "Permission denied" errors
when running claudeman via npm link symlink.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- README: add spawn1337 section, update architecture diagram with
orchestrator/detector, add spawn API endpoints, update test badge
(1426 total)
- ralph-wiggum-guide: add spawn-related files to references
- All docs: update Last Updated dates to 2026-01-23
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
When Claude enters plan mode or asks a question (AskUserQuestion), output
stops without a completion message. The new autoAcceptPrompts feature
detects this state and sends Enter after a configurable delay (default 8s)
to accept the plan or select the default option, keeping Claude working
autonomously.
Enabled by default. Adds UI checkbox in the respawn config panel.
Safety: only fires once per silence period, requires prior output,
and won't fire during active respawn cycles.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Moves case directory cleanup from afterAll to afterEach in all test
files that create cases. Previously, if the test suite was interrupted
or afterAll timed out, all case directories were left behind. Now each
test cleans up immediately after itself.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Replaces the ~400-line inline template string in claude-md.ts with a
file read from src/templates/case-template.md. Removes the hardcoded
/home/arkon/default/CLAUDE.md path from server.ts. The build script
now copies the template to dist/templates/ for production use.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Add native checkbox (☐/◐/☒) and Claude Code checkmark-based
(✔ Task #N) formats to CLAUDE.md and ralph-wiggum-guide.md,
matching the recently added detection code.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The RalphTracker now recognizes Format 5 - the checkmark-based output
that Claude Code's TodoWrite tool produces:
- "✔ Task #N created: <content>" → creates todo
- "✔ #N <content>" → registers task summary
- "✔ Task #N updated: status → in progress/completed" → updates status
Previously only detected markdown checkboxes, icon indicators, and
native ☐/☒/◐ format, missing the primary output format used by
Claude Code CLI sessions.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- CLAUDE.md: Add step confirmation behavior, respawnEnabled field, recovery
strategy with dual redundancy, updated state lifecycle
- README.md: Multi-layer idle detection, step confirmation, state persistence
in performance table, updated architecture diagram with State Store
- docs/: Updated last-modified dates to 2026-01-22
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
state.json is now the primary source for session recovery, but
screens.json is used as a fallback for respawn config since it was
the proven working path before. This provides double-redundancy:
both files would need to be lost for respawn state to disappear.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
cleanupSession() always called store.removeSession() which deleted the
session from state.json. On server stop, cleanupSession(id, false) was
called for all sessions - preserving screens but deleting their saved
state. On next restart, state.json was empty so nothing was restored.
Now only removes from state.json when killScreen=true (user explicitly
deleting a session), preserving state for recovery on restart.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
All session settings (auto-compact, auto-clear, ralph, respawn) are now
restored from state.json on server restart. Previously settings were
split across state.json, screens.json, and state-inner.json which was
fragile. state-inner.json is kept as a fallback for ralph state only.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
persistSessionState was called before the respawn controller was restored,
so respawnEnabled was always saved as false during recovery. Moved the
persist call to after all restorations (auto-compact, auto-clear, ralph,
respawn) are applied.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Session recovery from screens created fresh Session objects with default
values, losing the auto-compact and auto-clear settings that were saved
to state.json. Now reads them back during recovery.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The modal was reading from non-existent nested paths (session.autoClear?.autoCompact?)
instead of the flat properties from toState() (session.autoCompactEnabled, etc.).
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The respawn controller's enabled/disabled state was not being saved,
so CLI status couldn't show whether respawn was active.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add GET /api/sessions/:id/respawn/config endpoint for reading saved config
- PUT /api/sessions/:id/respawn/config now works without running controller
(saves pre-config to screens.json for when respawn starts)
- Respawn start/enable merges pre-saved config from screens.json
- Frontend auto-saves respawn config, auto-compact, auto-clear on field change
- Frontend loads saved config when opening session options modal
- Updated CLAUDE.md with state persistence docs, new API endpoint,
SessionState fields table, state lifecycle, and session setting guide
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The web server now persists all per-session settings (name, mode,
auto-compact, auto-clear, respawn config, ralph state, tokens, cost)
to state.json so the CLI status/session commands can display them.
Also removes unused pendingStepConfirm property from respawn controller.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add step confirmation timer for waiting_update, waiting_init, waiting_kickstart states
- After detecting completion in waiting states, wait for completionConfirmMs silence
- Prevents sending next command before Claude finishes processing current one
- Cancel step confirmation when working patterns detected
- Update CLAUDE.md with step confirmation documentation
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Update idle detection from legacy '↵ send' to completion message pattern
("for Xm Xs" time patterns like "Worked for 2m 46s")
- Add confirming_idle state for false positive prevention
- Add completionConfirmMs (5s) and noOutputTimeoutMs (30s) config options
- Add multi-layer detection with confidence scoring (0-100%)
- Fix null pointer error in extractTokenCount with guard clause
- Fix respawn controller not stopping on session cleanup (broadcast respawn:stopped)
- Update tests to use new completion message patterns
- Add detection status UI display (confidence level, waiting state)
- Update CLAUDE.md with new detection documentation
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add test/setup.ts with max 10 concurrent screen sessions limiter
- Add orphaned Claude/screen process cleanup before/after tests
- Add semaphore-based screen slot acquisition for concurrency control
- Update vitest.config.ts with setupFiles and fileParallelism: false
- Add 16 new test files for comprehensive coverage
- Update README badge to show 1337 total tests
- Update CLAUDE.md with test setup documentation
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
SSE Client Management:
- Add periodic health check (30s) to detect dead SSE connections
- Clean up clients with destroyed/non-writable sockets
- Clear all SSE clients on server stop
Session Lifecycle:
- Add _isStopped flag to prevent new timers after session stops
- Check flag in auto-compact/clear callbacks to avoid timer races
- Check flag in line buffer flush timer creation
Server Shutdown:
- Add _isStopping flag to prevent timer creation during shutdown
- Skip batch timer creation in terminal/output/task/state handlers
- Clear SSE health check timer on stop
Ralph Tracker:
- Call clearDebounceTimers() in clear() method (was missing)
- Add MAX_COMPLETION_PHRASE_ENTRIES (50) to trim phrase map
- Add MAX_LINE_BUFFER_SIZE (64KB) to prevent unbounded growth
- Trim line buffer when exceeding max size
Task Tracker:
- Add timestamp to pending tool uses for age-based cleanup
- Add PENDING_TOOL_USE_MAX_AGE_MS (1 hour) expiry
- Add MAX_PENDING_TOOL_USES (100) limit
- Clean up old entries on new tool use
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Reduce buffer limits (terminal: 5MB→2MB, text: 2MB→1MB) to decrease
render payload
- Add chunkedTerminalWrite() that writes in 64KB chunks via
requestAnimationFrame to avoid UI jank
- Add tail mode to /api/sessions/:id/terminal endpoint (?tail=256KB)
for faster initial load on tab switch
- Show truncation indicator when earlier output is cut
- Update CLAUDE.md with new buffer limits and performance notes
Fixes jittery behavior when switching tabs with large (2MB+) buffers.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- README.md: Update API endpoints to /ralph-state and /ralph-config
- ralph-wiggum-guide.md: Update class names (RalphTracker, RalphLoopState),
file paths (ralph-tracker.ts), SSE events (session:ralphLoopUpdate), and
API endpoints throughout
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Rename inner-loop-tracker.ts → ralph-tracker.ts throughout codebase
- Add ralph-config.ts for parsing .claude/ralph-loop.local.md config
- Standardize API error responses using createErrorResponse()
- Add input validation for auto-compact/auto-clear thresholds
- Update UI labels to "Ralph / Todo Tracker" consistently
- Add 46 integration tests for Ralph tracking functionality
- Update test badge to 438 total tests
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Extract <promise>PHRASE</promise> from CLAUDE.md on session start
- Configure inner loop tracker before first broadcast so UI shows phrase immediately
- More lenient bare phrase detection (triggers when loop is active)
- Auto-detect on session restoration from screens
- Add logging for auto-detection debugging
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add PersistedRespawnConfig type and respawnConfig field to ScreenSession
- Add innerLoopEnabled field to ScreenSession for Ralph Wiggum tracking
- Add updateRespawnConfig, clearRespawnConfig, updateInnerLoopEnabled methods to ScreenManager
- Save respawn config when enabled/updated via API endpoints
- Save inner loop enabled state when changed via API
- Restore respawn controllers and inner loop state on server startup
This ensures respawn continues working after claudeman restarts.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
After sending /clear, if no prompt indicator is detected within 10 seconds,
proceed to send /init anyway. This fixes respawn getting stuck when Claude
doesn't show the expected prompt characters after /clear completes.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add validation for input parameter in /input endpoint
- Add validation for cols/rows as positive integers in /resize endpoint
- Use standardized error responses with ApiErrorCode
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Internal Claude Code development files are not needed in the public repo.
Files remain locally but are now gitignored.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
