An omp session stayed "working" for good once a turn started, the same
latch pi had: omp's braille spinner trips the SPINNER_PATTERN fast path,
and only a composer glyph arms the idle confirmation. omp declared none,
so it fell back to Claude's `❯`, which omp never draws once its setup
wizard is done.
Measured on live omp 18.8.6 and 18.0.11 panes, holding a turn open
against a local endpoint that never answers: the input row is `╰─ <text>`
and is redrawn at submit, at the end of a turn, at launch and on
reattach. While a turn runs, the status bar's leading `π` becomes a
braille spinner plus the elapsed time (` ⠼ 14s > ⬢ model > ...`; 18.0.11
pads it with two spaces, past a minute it reads `1m`), with a
`⎋ Working…` row above it. The registry entry now names the input row as
the glyph and either working signal as the working line.
The glyph also switches the submit verifier on for omp, which reads the
input row the way it reads Claude's composer. A prompt sent mid-turn goes
to omp's Steering queue and clears the row, so the verifier stands down.
Text left in the row after an Enter is the one case it re-presses.
Verified end to end on a sandboxed instance (own HOME and PATH, omp
18.8.6): session:idle at launch, session:working during a turn,
session:idle about 3 s after it ended, and a restored pane settled idle
about 3 s after a server restart.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
An opencode session that ran a tool stayed "working" for good. The running
tool row draws a braille spinner (`⠋ Sleep for 12 seconds...`), which trips
the generic SPINNER_PATTERN and marks the pane working, but only a composer
glyph arms the idle confirmation and opencode declared none, so it fell back
to Claude's `❯`, which opencode never draws. Measured on an isolated
instance: a 16 s turn latched busy/isWorking for the rest of the session.
A text-only turn had the opposite problem and never showed as working.
Measured on live opencode 1.3.0 panes (capture-pane every 250-300 ms through
real turns at 40, 60, 120 and 200 columns, plus the raw PTY stream):
- Every composer row starts with a `┃` bar, and the submitted prompt lands in
the transcript with the same bar, so a turn's first repaint arms the idle
check, and tmux's reattach repaint does the same for a restored pane.
- While a turn runs the footer row starts with an 8-cell knight-rider
spinner, `⬝■■■■■■⬝ esc interrupt`, redrawn about every 40 ms (largest
gap mid-turn: 121 ms). At rest the TUI is silent and nothing on screen
draws a `⬝`/`■` run, the 200-column sidebar included.
- The working line is the spinner run, `[⬝■]{8}`, not the label: tmux ships
`esc` and `interrupt` as separate words joined by cursor moves, so the
label never reaches the stream detector, and at 40 columns the footer
wraps it to `esc` / `interr` / `upt`. All 344 spinner chunks of a turn
match the run after Codeman's ANSI strip.
- A pending permission prompt replaces the composer and stops the spinner,
so it reads as idle (waiting on the user).
- The last `┃` row on screen is the composer's agent/model row, or the
permission box's closing bar, never the prompt text, so the submit
verifier stands down and can never press Enter into a dialog.
Verified on an isolated instance from this branch: a 15 s tool turn emitted
exactly one session:working (+271 ms) and one session:idle (3 s after the
spinner stopped); a permission prompt read idle and the allowed turn went
working -> idle; after a server restart both restored opencode panes (one
at rest, one on a permission prompt) went busy -> idle in about 4 s; a
fresh launch reached an open page as idle in 3 s.
The launch-settle tests that used opencode as their example of a CLI
without work detection now use gemini and antigravity.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A pi session stayed "working" for good once a turn started. pi's braille
spinner trips the SPINNER_PATTERN fast path, which marks the pane working,
but only a composer glyph arms the idle confirmation and pi declared none,
so it fell back to Claude's `❯`, which pi never draws. Measured on beta136:
an errored turn stayed busy/isWorking for 3+ minutes after pi was back at
rest.
pi has no composer glyph. Measured on a live pi 1.1.0 pane (capture-pane
every 250 ms through a turn): its composer sits between two `─` rules, and
while a turn runs it rewrites the top rule as `── ⠏ Working ───` on every
frame. The registry entry now names the rule as the glyph that arms the
check and a spinner frame inside it as the working line.
The same glyph settles a reattached pi pane (a restored pane gets no launch
timer): tmux's reattach repaint carries `─`, which arms the confirmation.
The submit verifier reads the last rule, finds no prompt text and stands
down, so it can never press Enter on a pi pane.
Verified on an isolated instance from this branch: a real pi turn emitted
session:working then session:idle, and after a server restart the restored
pi pane went busy -> idle in about 3 s.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The owner asked to drop the "+" (Add Case) and gear (case settings) buttons
beside the toolbar case picker. Their two actions now close the picker's own
list instead, as "New or link a case…" and "Case settings…" rows in a sticky
footer, so nothing becomes unreachable: on desktop the "+" was the only door to
Add Case (create, link, clone, manage), and the gear the only one to the
per-case Agent Teams / 1M Opus overrides.
The rows are part of the arrow-key walk (after the last case) and Enter runs
them, they also show when nothing matches the filter, and the case settings
popover still opens anchored to the case group. The picker input gets its
right-hand corners back, and the dead .btn-case-add / .btn-case-settings rules
(desktop, phone and two skin selector lists) are gone. Phones keep their own
case sheet and gear.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The owner's picks after testing the 1.36.0 beta:
- Header Stats Style defaults to Compact (two pills with rings) instead of
Tiles. The resolver, the pre-paint stamp and the App Settings option all
agree; an unknown value now reads as compact.
- The Tiles header button is ON by default everywhere but handhelds (their
defaults object keeps it off, and the button still needs a 1180px window).
The Ctrl+Shift+G gate in tileShortcutFor() now resolves an absent key
through the device defaults too, so the chord and the button cannot
disagree; before, it required a stored true.
- Tab Layout defaults to Classic (the single strip, as before). By state, By
case and Ledger stay available as opt-ins. The tile-grid beta the owner used
last had only this layout, and it is the one they wanted back.
zh-CN option labels follow the new "(default)" markers; docs and wiki updated.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Only the stepper half of #428 lands here. Its other half, the phone case
picker search, shipped separately in #488 (1.33.1) and is kept as it is on
master, so every file of this merge starts from ours and only the stepper
changes are ported onto it:
- index.html: the second `− 1 +` group (#shellCount) after Run Shell is gone.
- session-ui.js: incrementShellCount/decrementShellCount are removed and
runShell() reads the toolbar's one stepper through _readTabCount(), the
helper master grew since #428 was opened (same clamp and absent-element
fallback as #428's _toolbarInstanceCount()).
- run-mode-ui tests stub #tabCount instead of #shellCount, plus #428's
"toolbar instance count" block adapted to _readTabCount() and a markup check.
- wiki: "the instance counter", singular.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The spec's as-built list, the wiki's Tile Grid page and the CLAUDE.md
tile grid paragraph: the button has no native title, its hover card
says the count and what a click and a right-click do, it is the
button's aria-describedby (always present, hidden, kept current), and it
hides in the capture phase on any press, click or right-click so the
count menu never opens beside it.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- docs/tile-grid-plan.md: owner decision 10 (right-click Tiles is a
2 / 4 / 6 count menu, default 6, remembered per device; the session
picker is gone; decision 8's "picker on right-click" and "exactly the
stored set" superseded) with the owner's answers on the details; three
as-built bullets (the count menu, the animation, painting first); the
Tiles-button bullet rewritten for the count; the entry points, the
capacity note, the multi-user row and the Escape invariant follow.
- docs/architecture-invariants.md: the Opening paragraph rewritten (the
count, the stored grid in its cells, the menu owning its Escape, the
paced connect and focusOnConnect, the motion rules); the z-index list
names the count menu and the closing grid's still copy.
- CLAUDE.md: the tile grid paragraph and the z-index line.
- Wiki: Tile Grid (the click, the count menu, the animation, reduced
motion) and Keyboard Shortcuts (right-click Tiles).
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Owner feedback 1: "so the empty tab doesnt always have to be the last
one! so I can move freely around and the empty tab can also be tab nr
4 or 3". This replaces the slot refusal of aecada8c.
grid.cells (a session id or null per cell) is now the one source of
truth; grid.ids is a getter deriving the tiles in reading order, so
everything that only wants the tiled sessions (focus neighbour,
cycling, the load queue's order, the picker, closeSession) is
unchanged. The shape still comes from the tile count and the cap
counts tiles, never empty cells.
- A tile dragged onto an empty cell moves there and leaves its own
cell empty, nothing else moving (_moveTileToCell, through
_reorderTiles: no remount, reconnect or reload; only a tile whose
cell size changed fits). A tiled session's tab does the same; a tab
of a session not tiled yet joins in the cell it is dropped on. Each
slot knows its cell and reads "Drop a tab or a tile here".
- Move Tile goes to the adjacent cell: into it when empty, a swap when
a tile is there (tileCellInDirection).
- Removing a tile leaves its cell empty; adding one takes the first
empty cell. A shape change goes through fitTileCells: each tile keeps
its row and column when all fit (2x2 growing to 3x2), else the tiles
pack in reading order.
- Focus never lands on an empty cell: Alt+Shift+Arrows run over the
cells, Ctrl+Tab and Alt+[ ] over the tiles.
- codeman:tile-grid stays ids only: its ids are the cells with null for
an empty one. A reload brings the holes back when the shape is the
same (a session gone since leaves its cell empty), another shape
packs, the old packed format reads unchanged, and a followed
#session= link keeps the holes.
Docs: the spec's as-built bullet (rewritten in place), the wiki's Tile
Grid page and Keyboard Shortcuts, the invariants and CLAUDE.md.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The owner's answers on moving tiles:
- "dont move the tile": an empty slot no longer takes a tile. A slot is
always the last cell, so a move there shifted every tile after it.
Each drop target now says what it accepts (_acceptTabDrops'
`accepts`): a tile takes any session but its own, an empty slot only a
session not tiled yet. A refused drag is still held (dropEffect none,
no highlight), and dropSessionOnSlot refuses a tiled session too, its
tab included. A session not tiled yet still joins on a slot.
- A cancelled drag changes nothing, focus included (best practice): the
header focuses its tile on click, never on press, so a drag that ends
with Escape or outside leaves focus and the idle alert alone. The body
keeps press-to-focus, so focus still moves before a press reaches
xterm. The rename input stops its own clicks.
- A tiled tab dropped on the zoomed tile stays refused (confirmed).
- The Alt+Shift+Arrow focus chords skip a text field too (best
practice), as the move chords already did: shifted arrows select
there. Toggle and zoom are not text-editing keys and are unchanged.
Docs: the wiki, the spec's as-built bullet (with the owner's answers),
the invariants and CLAUDE.md say so.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The wiki's Tile Grid page gets a "Moving tiles" section and the move
chords in its keys table (with what they leave to a text field and
take from a terminal editor inside a tile); Keyboard Shortcuts lists
the chords and the header drag. The spec records moving as an owner
request in its as-built list, with the reasoning behind the default
keys. The invariants and CLAUDE.md say every move goes through
_reorderTiles (no remount, reconnect or reload; only a tile whose cell
size changed fits) and that the header drag carries its own type and
is not draggedTabId.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- api-reference: the `config` source in the displayModel table, read again at
every pane start, attach and relaunch rather than restored.
- cli-registry: `modelDetect.configResolver` (a named, read-only, bounded
reader), the stock `deepseek-route` reader and its rules, and why the dsh
footer pattern needs a digit.
- deepseek-integration §4: Codeman reads the route for display only, the way
dsh-TUI resolves it; the catalog check it cannot see.
- architecture-invariants (tile grid), tile-grid-plan "as built" (owner
feedback 1), the wiki's model row, CLAUDE.md's source order.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- api-reference: the new `displayModel` session field, its sources in order
(custom-endpoint, statusline, screen, launch) and that it is untrusted
display text, persisted and restored when the CLI reported it.
- cli-registry: `capabilities.modelDetect` (one capture group, the last rows
of the probe's capture, anchored on chrome only that CLI draws), the two
stock patterns (dsh-TUI, codex) and the fifth config regex.
- architecture-invariants (tile grid): the header painter, the id as data, the
untrusted model text, no writes for an unchanged session, the truncation
order, Pane A's strip and its fits through syncTerminalGeometry.
- tile-grid-plan "as built", the wiki's Tile Grid page (logo and model rows,
Split's strips), and CLAUDE.md's tile grid and CLI registry paragraphs.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The spec records decision 9 and an as-built entry replacing the "+ / New
session in this case" one, and marks the target picture, the header line
and the + bullet as built without it. CLAUDE.md's header list, the
invariants' z-index line (the + menu's layer) and the wiki's Tile Grid
page (the header string, its table and the cap sentence) drop the +.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Drawing only the selected tab's family hid every other connection until you
clicked into one. All families are drawn again (still as routed trees); the
selected tab's families (what it spawned, and the family it was spawned into)
get .lineage-family--focus: 2.5px instead of 1.5px, full opacity instead of
0.75, a larger end dot, and drawn last so nothing covers them.
Lanes follow strip order (cycling through CodemanLineage.MAX_LANES, 3), never
the selection, so a family's lines never move when you click a tab.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
With the grid closed, Ctrl/Cmd+click on a tab opens what the Tiles button
would show (decision 8) plus that session; the wiki only said it opens
the grid.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Lineage lines used to draw one glowing dashed bezier per parent/child pair,
hanging below the tab strip, for every family at once. With a parent on row 3
of a wrapped strip and ten children below it, the curves crossed every lower
row's tab names and ran through the terminal text.
- One rounded orthogonal tree per spawning tab: every route starts at the
parent, so siblings share a trunk. 1.5px, solid, 1px dark outline; only a
working child's branch is dashed.
- Routes run only through the gaps between tab rows, joined by a spine left of
every row (computeLineageTree/computeLineageRows in constants.js), so they
never cross a tab or reach the terminal. The vertical rail gets the same tree
on its existing left track.
- Only the selected tab's family is drawn (what it spawned, plus its parent and
siblings). Selection redraws, and the strip's size transitionend redraws once
more, since the active tab widens for ~150ms after the selection redraw.
- The routing room is reserved by .session-tabs.lineage-tree, keyed on whether
any lineage exists, never on the selection, so a tab switch never resizes the
header or the PTY.
- Colours stay per spawning tab, now claimed in strip order for every family so
selection order never decides who gets the skin blue.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Owner decision 8 ("when I hit the tiles button, open the tiles already!").
A click with the grid closed now opens it straight away, and Ctrl+Shift+G
runs the same function (toggleTileGrid), so the two cannot drift. What
opens comes from one pure helper, tileGridOpenSet (constants.js):
a. the grid this tab last had, if any of its sessions survive, opened
exactly (an open split closes and its sessions do not join);
b. else an open split's two sessions, Pane A focused;
c. else the open sessions in tab order (the picker's list: no detached
ones), up to what the grid takes here (the cap of 6, fewer when the
window fits fewer), the active session always among them and focused.
A click with the grid open still closes it.
The picker moved to right-click (oncontextmenu, browser menu suppressed).
With the grid open it is preselected with the current tiles, and Open
replaces them. Ctrl/Cmd+click on a tab with the grid closed opens the
toggle's set plus that session. The button's title, the Help modal and
the wiki say right-click chooses which sessions.
Docs: decision 8 and an as-built entry in the spec (Entry points too),
CLAUDE.md, the invariants (#tile-grid, Opening), the wiki's Tile Grid and
Keyboard Shortcuts pages.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Six was tested smooth on the owner's desktop; nine missed the headless
frame bar and is untested on real hardware. TILE_GRID_MAX (constants.js)
is now 6 and stays the one cap every limit reads; the layout table gets
its own bound, TILE_LAYOUT_MAX = 9, so the 7 to 9 layouts keep working
(unreachable) and going back to nine is that one line.
Every way in stops at the cap: opening, addTile, a tile's +, a session
Run makes, Ctrl/Cmd+click, the picker, "Open group as tiles", and a stored
grid with more ids (it comes back as its first six, focus kept only if it
survives, a dropped zoom cleared, row fractions that no longer match the
3x2 reset). The limits now go through one helper, _tileGridLimit(), whose
texts say which limit binds: "Up to 6 tiles" / "The grid holds at most 6
tiles" when it is the cap, "This window fits N" when it is the window.
Docs: decision 7 and an as-built entry in the spec, CLAUDE.md, the
invariants, the wiki's Tile Grid and Dashboard pages.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- CLAUDE.md: a Tile grid paragraph beside the split-pane one (parking, the
one load queue, the selection and close rules, chords, dividers, auto-join,
the exited-agent case), tile-grid.js (7.6) in the load order, the
desktop-gated header markers and the Tiles picker in the z-index stack.
- docs/architecture-invariants.md#tile-grid: the mechanisms and the reason
behind each rule; the split section now says where a waiting grid load
differs and that every capture carries a deadline.
- docs/wiki/Tile-Grid.md: the user manual page (turning it on, the ways in, a
tile's header, keys, leaving, persistence, Split), linked from the sidebar,
The Dashboard, Keyboard Shortcuts and Settings Reference.
- The Help modal lists the tile chords (pinned in help-modal-shortcuts.test).
- docs/tile-grid-plan.md: status updated, and an "as built" list of where PR 2
went another way than the spec.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Close Session was bound to Ctrl+W by default. Ctrl+W is delete-word in
every shell, readline prompt and agent CLI, so muscle memory killed the
session (its tmux pane and CLI, with no confirm) mid-sentence, and with
the split pane open it was not even the pane being typed in.
Close Session now has no default key: the capture-phase handler lets
Ctrl+W through and xterm sends ^W to whichever pane is focused. The
action stays in the registry and can be bound in App Settings ->
Shortcuts; the shortcut overlay shows it as not bound. The Help modal,
CLAUDE.md, the split and tile-grid specs and three wiki pages stop
advertising Ctrl+W as kill. Owner decision (tile-grid decision 5).
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Compact now draws every reading the same way, ring then label then
value: CPU and MEM get an accent ring (red past 80%, like their value)
in place of the sparklines, the plan windows keep their green, yellow
or red rings, the dot separators go, and both pills share one label and
one value style. The sparkline markup, history and CSS are removed.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Idle is the default state of a tab, so naming it only adds noise. The
idle group is now quiet: its heading element stays (it anchors the row's
order band and, as the first row, holds its place beside the brand) but
draws no label or count. Needs you, Waiting and Working are unchanged.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Tab Grouping becomes Tab Layout (tabArrangement: 'state' | 'case' |
'ledger' | 'classic', default 'state'), the first row of App Settings,
Appearance, Tabs, so the old and the new strip are one choice apart.
- By case (option A): each case's tabs sit in one .tab-cluster box in
first-appearance order, labelled with the case and its count, coloured
by a stable hash into the session palette. Membership is
_mobileOverviewCaseFor(), the home screens' own match. Inside a box with
company a generated w75-api-gateway reads w75; the -<case> stays in the
DOM in a .tab-name-case span only .tabs-clusters hides. The incremental
render path rebuilds only when the cluster structure key changes. The
rail and the sidebar get a labelled section per case; phones dissolve
the boxes into the chip row. Drag stays inside one box.
- Ledger (option B): CSS only on .tabs-ledger, desktop header strip: an
auto-fill column grid of equal cells in mono type with a 3px status
bar. Its markup is identical to classic's.
- State Order (tabStateOrder: 'urgent-first' | 'urgent-last'): flips the
by-state groups so needs you can be the bottom row.
- By state: the label column is measured to the widest label on screen
and the labels are right-aligned in it, instead of a fixed 92px gutter
that left short labels far from their tabs.
- Tiles: a three-row grid (label, value, bar) with pixel line-heights in
the bundled JetBrains Mono, 36px like the header. The bar used to lie
over a fixed 28px tile, and a taller system mono (SF Mono) pushed the
value into it. The WS tile's grid moved onto an inner .connection-tile
span because JS writes the indicator's display inline. Compact uses the
same font and a matched WS size.
Tests: test/tab-clusters.test.ts (new), plus the rename and the reversed
order in test/tab-triage.test.ts.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Two directions from Discussion #426, each a per-device setting and the
new default.
Tab Grouping (tabGrouping: 'state' | 'none', default 'state', option C):
tabs are grouped needs you (red, plus failed sessions), waiting (yellow),
working and idle (also ended, exited panes and web tabs), most urgent on
top. The desktop header strip draws a row per group with its label and
count in a left gutter; the flat vertical rail and the sidebar draw a
section per group; tablets keep their scrolling row with inline dividers;
phones keep the chip row in group order without headings. Classification
is the home screens' own (_mobileOverviewState/_mobileOverviewExit), the
fold into four groups is pure in CodemanTabTriage (constants.js). It is
flex `order` plus aria-hidden heading/break elements reconciled in place
after both render paths, never a DOM reorder, so Alt+N, the keyboard walk
and drag keep reading tab order; a drop is refused across groups. Named
groups in the vertical rail take precedence.
Header Stats Style (headerStatsStyle: 'classic' | 'compact' | 'tiles',
default 'tiles', option G): tiles give WS, CPU, MEM and each plan window
a label-over-value tile with a bar underneath; compact is one WS/CPU/MEM
pill with sparklines plus a plan-ring pill; classic is the header as
before. Desktop only (classic below 768px and in solo windows). The
clustered styles move #connectionIndicator into #headerSystemStats and
WS stays out of a hidden System Stats pill. The extra parts are always
rendered and hidden by default in CSS, so classic is unchanged.
Tests: test/tab-triage.test.ts, test/header-stats-style.test.ts; three
source pins in test/tab-rail-order.test.ts follow renamed lines.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- hooks-config: a probe the bulk cap refused gets ONE bounded re-probe past the
cap (probeBeforeTouching), and whatever is still unknown is skipped. The
per-spawn hook and statusLine helpers used to fall back to an unbounded
lstat/readFile there, which on a dead workspace never settled and could take
the last threadpool workers (and hang the boot hook sweep). New test: cap
engaged, stat/lstat/readFile hanging on two more paths; both helpers return.
- describeUnknownPath()/unknownPathReason(): POST /api/sessions, quick-start and
GET /api/cases/:name now say a folder was not checked (other mounts are still
not answering) instead of blaming a healthy folder at the stall ceiling.
errorCodes unchanged.
- #535 x #516: Create in a custom folder probes the parent through the bounded
probe before realpath/stat/lstat/readdir touch it; an unknown parent is 422
OPERATION_FAILED (UNREACHABLE) within the probe timeout. New test.
- Docs: MAX_STALLED default is 2 (follows UV_THREADPOOL_SIZE), CaseInfo
.unreachable covers a refused probe, the boot sweep skips an unanswering
workspace, a CLAUDE.md gotcha for bounded probes, verbs.md documents the 422
(plugin mirror synced), api-reference documents the custom-folder 422.
- Tests: the launcher case-lookup describe is no longer nested in the Grok
block, and the cap-below-ceiling test no longer depends on an inherited
UV_THREADPOOL_SIZE / CODEMAN_PATH_PROBE_MAX_STALLED.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- createEditCoordinator's finally block rebases the edits queued during a write; one that the write's 409 made inapplicable was dropped with no toast. It is now reported once, like the main loop and adoptExternal do (found by the PR bot's re-review; regression test fails without it).
- At the 32-group server cap the row and group menus no longer offer a new group, which could only fail with an untranslated 'group limit reached'. MAX_GROUPS is exported from tab-layout-browser.js.
- CLAUDE.md names the pagehide keepalive as the one deliberate exception to 'never PUT the layout outside the coordinator'.
- The Dashboard wiki page describes tab groups in the vertical rail row.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- A cached list of repositories below a folder is re-checked against the
Docker case workspaces as they are now, so a repository linked as a Docker
workspace within the 30 s list cache is no longer inspected.
- A diff past runGit's 8 MB output bound is cut short from git's partial
output instead of failing with a 500.
- The browser test waits for its slow route handler on unroute
(unrouteAll behavior 'wait'), so a late route.continue() cannot fail the run.
- "Upstream is gone" now reads "Upstream not on remote", true for a branch
that was never pushed as well as one deleted on the remote; docs mirrored.
- The diff route checks the repository against the workspace's own cached
repository list (findWorkspaceRepo) and refreshes only that repository,
instead of a fresh status of every repository in the folder.
- CLAUDE.md: a Key Patterns entry for the git read surface and its rules.
- The enclosing repository is identified with one cached rev-parse before
any full status, so an unrelated repository above the workspace costs one
process and its failure no longer hides the repositories below.
- Wiki: the bottom-bar indicator moves out of the header-controls table.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
fix(cases): bound path probes for linked workspaces and session creation, so an unreachable mount cannot freeze the server
# Conflicts:
# src/web/routes/case-routes.ts
feat(ui): git status indicator in the bottom bar, with a panel of uncommitted and unpushed work
# Conflicts:
# config/test-suites.ts
# docs/api-reference.md
- never inspect a repository at or inside a Docker case workspace (walk-up, scan, diff route): git would run its clean filters on the host
- a branch whose upstream was deleted and pruned reports upstreamGone and falls back to commits on no remote, instead of green
- turning the setting off during a poll releases the in-flight flag
- log.showSignature=false; reword the docs: clean filters still run
- CLAUDE.md frontend load order, changeset names git-diff
- discovery reads a bounded, sorted directory listing; leading-dash paths allowed; diff 500 redacts credentials
- keyboard focus survives the poll re-render; panel stays on screen on narrow viewports; aria-expanded visible on light skins
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01JrzFKEdBLwVfu6ev2ZscJS
- doctor probes each CLI's discovery.searchDirs when which misses and runs --version on the resolved path, so a service with a minimal PATH no longer reports installed CLIs as missing
- GET /api/doctor shares one in-flight run per category
- Diagnostics group hidden from non-admins in multi-user mode (_applyDoctorAdminGate)
- 500 uses INTERNAL_ERROR; a killed child reports 'timed out after 30 s'
- browser test blocks service workers so page.route() is reliable
- wiki: Diagnostics sentence
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01JrzFKEdBLwVfu6ev2ZscJS
The bounded path probe answered "absent" both when a path did not exist and
when it simply did not answer, so a stalled linked case 404'd and the Run
button scaffolded a stray local case over it, and two stalled paths anywhere
made every unrelated path read as absent (hooks skipped, statusLine
overridden, the clone warning lost).
- probePath()/probePathKind() are tri-state: present (or directory/file),
absent (ENOENT/ENOTDIR only) and unknown (timeout, other errors, refusal).
boundedPathExists() stays as the display-only boolean.
- A stalled path takes only its own mount out of probing (deepest mount
point from /proc/self/mounts, never /; just the path itself when there is
no mount table). Unrelated paths keep probing. The process-wide cap is a
backstop that answers unknown, and a single-path user request can probe
past it ({ pastCap: true }), still bounded and still recorded as stalled.
One console.warn when a path first stalls and one when the cap engages.
- GET /api/cases/:name keeps NOT_FOUND for definite absence only. An
unreachable linked case answers with its registered path and
unreachable: true; a local one answers OPERATION_FAILED. runClaude and
runShell create a case only on errorCode NOT_FOUND. The case list keeps an
unreachable linked case, marked unreachable, instead of dropping it, and
fix-plan reports an unreadable plan as an error, not "no plan".
- applyWorkspaceHooks and the statusLine helpers skip only a workspace that
is absent or on the stalled mount; a capacity refusal no longer stops
hooks being installed elsewhere, and an unreadable settings file never
lets the exporter override a user's own statusLine.
- The clone flow's repo-settings warning is back on its synchronous check,
and stripCaseEnvKeys uses pathExistsForWrite.
- POST /api/sessions (workingDir) and POST /api/quick-start (case folder)
probe with the bounded probe instead of statSync/existsSync. Missing and
non-directory keep INVALID_INPUT; unknown is OPERATION_FAILED, and
quick-start never scaffolds over a folder that did not answer.
- PATH_PROBE_TIMEOUT_MS and MAX_STALLED_PATH_PROBES move to
src/config/path-probe.ts, overridable via CODEMAN_PATH_PROBE_TIMEOUT_MS
(default 1500) and CODEMAN_PATH_PROBE_MAX_STALLED (default 3), and are
documented in the Settings Reference.
- The probe is exported from the utils barrel and imported from there.
POST /api/cases takes an optional path; Add Case > Create New gets a 'Create in a
custom folder' option with Browse. The folder is created (or an empty one filled),
scaffolded like a normal case and registered as a linked case. System, home,
credential and Codeman folders are refused; a folder with files is Link Existing's
job; a failure after the first write undoes what this call created. Admin only in
multi-user mode, like Link Existing.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Maintainer merge-time fixes for the MCP server sync (opt-in mcpSyncEnabled, synced, default OFF).
M1, parse errors echoed config text (secrets included) into the HTTP response and Settings:
smol-toml's TomlError carries a code frame of the offending lines and V8's JSON "Unexpected
token" errors quote source. Both catch sites now go through describeMcpSyncError(): a parse
failure is reported by line/column only ("not valid TOML (line 3, column 21)", "not valid
JSON"), an errno failure by Node's own message (code, syscall, path), the module's own
messages via a McpConfigError class, anything else as "unexpected error". Tests put a secret
on the broken line (TOML, both JSON message shapes, and a write refused at the re-parse that
would have quoted a copied server's env) and assert it is absent from the result and from the
route's response body; they fail against the old code.
M2, CODEX_HOME / CLAUDE_CONFIG_DIR / XDG_CONFIG_HOME were ignored, so a sync could create a
file the CLI never reads and report success: new optional registry field
capabilities.mcpConfig.relocation { envVar, path } (registry data, no id branch; schema
reuses the env-name and no-traversal path rules). Declared for claude (CLAUDE_CONFIG_DIR,
checked in the 2.1.289 binary), codex (CODEX_HOME), opencode (XDG_CONFIG_HOME) and gemini
(GEMINI_CLI_HOME, gemini-cli paths.ts); antigravity follows $HOME only (agy 1.1.12 has no
relocation var). Resolved from the server process env at call time: absolute moves the file,
empty means unset, anything else reports the target with the new status "skipped" plus the
reason and writes nothing. Dedupe is now by resolved file. When a caller overrides `home`
without passing `env`, process.env is not consulted, and the route tests clear those vars so
a CI runner's XDG_CONFIG_HOME can never aim a write outside the temp HOME.
M3, feature undocumented: CLAUDE.md Key Patterns paragraph (opt-in, admin-only, additive
only, backups, re-parse validation, 0600 for copied secrets, names-only responses with
position-only parse errors, capabilities.mcpConfig and relocation), a Settings-Reference row
in the wiki, and docs/cli-registry.md + docs/api-reference.md updated for relocation, the
"skipped" status and the error policy.
Nits:
- N1 Preview/Sync before Save: the UI remembers the saved value on open and says "Save
settings to turn MCP sync on first" instead of calling the routes; the 403 message also
says to turn it on and save.
- N2 non-admins in multi-user mode: _applyMcpSyncAdminGate() hides the whole MCP group, called
from applyMcpSyncVisibility() and the codeman:me event like the CLI-management gate.
- N3 scope chip says "synced".
- N4 "(1 servers)" pluralised; the unsupported list only names installed CLIs (route test
pins it with a per-test installed set).
- N5 McpSyncResult / McpSyncTargetResult moved to src/types/mcp-sync.ts (barrel export); only
the route imported them, so no churn.
Verified with an isolated instance (throwaway HOME, own instance and tmux socket) and
Playwright: chip, save-first message, preview rendering and the admin gate.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Merge-time fixes for the webhook notification channel (ntfy, Slack, Discord, generic JSON).
Minor 1, App Settings Save silently dropped webhook edits: the modal's main Save now
persists the webhook group beside the settings PUT, the same way it already saves the
model config (saveModelConfigFromSettings), but only when the group differs from what
loadWebhook() put on screen (_webhookPending), so an untouched group never re-PUTs. A
refusal (bad URL, enabled with no URL) shows a warning toast, keeps the modal open and
scrolls to the group with the pasted URL still in the box, instead of a success toast.
Send test now saves pending edits first, so it never tests the old URL while the box
shows a new one. The row says so in one line.
Minor 2, no test for the server.ts glue: new test/webhook-push-glue.test.ts drives the
private sendPushNotifications on a real (never started) WebServer with an EMPTY push
store and webhook.json in the instance data dir, delivering through the real
egress-guarded fetch to a local receiver: a permission prompt arrives with the
host-prefixed ntfy Title and body while Web Push is never called, an immediate repeat is
deduped, "response complete" is skipped under scope attention and sent under all, and a
disabled config or a non-push event sends nothing. Verified it fails when the webhook
call is moved below the "no subscriptions" return.
Minor 3, docs: webhook.json added to CLAUDE.md State Files; a Webhooks section in
docs/wiki/Notifications-And-Approvals.md (setup, what is sent, the secret URL, public
ntfy topics, local targets allowed, dedupe, instance-wide reach in multi-user mode) plus
a table row, and a line in Settings-Reference; new section 10c in
docs/security-architecture.md for the second outbound channel through the web-tab
egress guard.
Nits:
- Orphaned JSDoc: the webhook schema moved below the push schemas, so
PushSubscribeSchema has its comment back.
- Duplicated enums: WebhookUpdateSchema uses z.enum(WEBHOOK_KINDS/WEBHOOK_SCOPES), so
the schema cannot accept a kind the store would coerce away.
- describeError classifies egress refusals with isEgressBlockedError (the
CODEMAN_EGRESS_BLOCKED code anywhere in the cause chain) instead of a message regex;
tests pin a deep cause chain and that matching words alone are not a refusal.
- Markup: the URL input uses set-input, the whitespace-only line is gone, and the switch
row hints to pick a long random topic on public ntfy.sh.
- Remove a saved URL: a "Remove URL" button (shown only while a URL is saved, with a
confirm) sends { url: "", enabled: false }.
- Types placement: WEBHOOK_KINDS/SCOPES and WebhookKind/Scope/Urgency/Config/Result/Status
moved to src/types/push.ts (the IO-side WebhookMessage/Request/Fetch stay in the module).
Browser test extended: main Save persists a pending edit, a refused URL keeps the modal
open with the URL, Send test saves a newly pasted URL first, Remove URL clears it.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- Minor: the Key tester "14 lines" test never pressed a key into the
tester (the previous test blurred it, so the presses landed on <body>
and the cap was never exercised). It now refocuses the field, asserts
the focus, clears the log, checks 2 presses accumulate to 6 lines, then
4 presses of another key cap the log at exactly 14 with the oldest 4
lines evicted in order, and the readonly field stays empty. Verified to
fail with the cap changed to 20.
- Nit: the split-pane invariant implied Ctrl+Enter could use the CLI's
declared newline chord. Reworded after checking the send-key route:
Ctrl+Enter is always a real 0x0a, Shift+Enter is the declared
capabilities.newline chord (0x0a unless the CLI declares another), sent
on keydown only. The same imprecision in the auto-named sessions
paragraph is corrected too.
- Nit: docs/wiki/Settings-Reference.md now lists the Key tester row in
the Terminal & Input table.
- Nit: test/shift-enter-keypress.browser.test.ts exercised a hand-copied
predicate named `shipped`. It now loads the real app from a real
WebServer and presses real keys into the handlers terminal-ui.js
(app.terminal, recording the real _sendInputAsync send path) and
terminal-split.js (a real SplitTerminalPane) attach, recording the
send-key POSTs through a fetch wrapper. It asserts no \r reaches either
send path for Shift/Ctrl+Enter, exactly one send-key per press for the
right session, and that Enter and Alt+Enter are untouched. The old
keydown-only gate stays as a labelled reproduction of xterm's keypress
behaviour on a bare Terminal. Verified to fail on both panes with the
gate narrowed back to keydown.
- Nit: the keypress trap is now written down beside the other key-gate
rules (Command palette and shortcut registry): xterm runs the custom
handler for keydown, keypress and keyup and drops only Ctrl/Alt/Meta
keypresses, so a gate on a chord that can carry Shift alone must
swallow every event type. The smart-copy keydown-only rule points at it.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Claude Code's advisor tool (code.claude.com/docs/en/advisor) lets the session's
main model consult a second, stronger model at decision points: before
committing to an approach, on a recurring error, and before declaring a task
done. Codeman can now start claude sessions with one.
- `advisorModel` field on POST /api/sessions, /api/quick-start and
/api/ralph-loop/start (fable, opus, sonnet or a full model id in those
families; haiku cannot advise and is refused). Stored on the session and
persisted, so respawn, boot restore and reboot restore keep it. Remote and
docker quick-starts refuse it, as they refuse effort.
- App Settings, Models, "Advisor" segment (Default / Sonnet / Opus / Fable),
synced as `claudeAdvisorModel`. Run, resume and the Ralph wizard send it.
Default sends nothing, leaving the CLI's own /advisor choice in charge.
- Carried as the `advisorModel` key in the launch's single --settings JSON,
merged with ultracode and the statusLine exporter, never the --advisor
flag: `claude --advisor haiku` exits 1 at launch, which would leave a dead
pane on every respawn, while the settings key degrades to no advisor. A
launch without an advisor is byte-identical to before.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Opt-in (mcpSyncEnabled, default OFF; routes 403 until on). Review fixes:
- codex TOML read/validated with smol-toml: CRLF, inline tables and
command-less tables no longer yield a duplicate [mcp_servers.x]; the new
text is re-parsed before writing
- null-prototype tables and own-key checks; unsafe names ignored at every level
- servers switched off in their own CLI (codex/opencode/antigravity) are not copied
- only CLIs that are installed or already have a config file take part
- files receiving env/headers are left 0600; symlinked configs are written through
- one apply at a time (409), unique tmp files cleaned on failure, failed status
- routes set real HTTP status codes; api-reference section; format type single-sourced
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Adds capabilities.mcpConfig to the CLI registry (Claude, Gemini, Codex,
OpenCode), an additive src/mcp-sync.ts, GET/POST /api/mcp-sync and a
Settings > Agents & CLIs control. Never edits or removes an existing
server; backs up each file it changes; reports conflicts.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
- A markdown preview opened by attachment id under a bare file name
(attachment cards, history drawer) no longer resolves relative refs
against the workspace root: filePreviewText carries attachmentId, and
the rebase pass turns those images into their alt text and unwraps
those links. Absolute-path and workspace previews are unchanged.
- _renderMarkdown(text, { breaks = true } = {}): the File Viewer passes
breaks: false, so a hard-wrapped paragraph renders as one paragraph;
the Response Viewer keeps a <br> per newline.
- Absolute paths linkified inside a rendered document now carry the
preview's data-session-id.
- CLAUDE.md, architecture-invariants and the Working-With-Files wiki page
now say that only an in-workspace path clicked in the terminal keeps
the tail viewer.
- Tests in test/file-preview-markdown.test.ts for all three fixes,
including an end-to-end run of the shipping app.js + marked + DOMPurify.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Review follow-up on #503. marked percent-encodes link and image destinations, and the rebase pass encoded them a second time, so a space or a CJK character in a file name made file-raw look for a file literally named my%20image.png; refs are now decoded once (a malformed escape is kept as written) and stripped of ?query along with #fragment. Root-relative refs resolve from the workspace root as on GitHub instead of falling through as Codeman URLs. Rebased links carry the preview's own session id and the response-viewer delegate prefers it, so a document opened from another session's attachment card opens its links in that workspace rather than the active tab's.
The sanitizer no longer allows name=: marked never emits it, and <img name="app"> made document.app that image, which every inline onclick="app.…()" handler resolves before the global, so one rendered README broke every viewer button until a reload. Adds the zh-CN strings for the three toolbar titles.
- _logScrollRouting() reports cliMouseTracking, the gate's new input, in both
the de-dup signature and the console line (xterm's own mouseTracking stays
'none' for Claude, so it gave no reason for a no).
- Restore two guard tests the new gate made vacuous: the local-scrollback
opt-out footgun test and the codex/gemini "no version rescues it" fixtures
now set cliMouseTracking: true, so removing the opt-out or re-adding codex to
the gate fails again.
- Update the comments and architecture-invariants lines that still described
the version-only rule (wheel handler header, gate doc, the false paths of
_maybePageCliTranscript, "holds a tracking mode on continuously").
- Name both fullscreen switches (CLAUDE_CODE_NO_FLICKER=1 and "tui":
"fullscreen" in ~/.claude/settings.json) in the code comment, the invariants
and the two wiki pages.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- test: the complete-identity case now checks the combined
agentImageBuildArgPairs() argv on both producers, so the manual
build-agent-image.mjs path cannot drop the identity unnoticed
- both producers: GIT_IDENTITY_BUILD_ARGS carries the mirror/parity
warning its gh/az neighbour has
- the partial-identity error names CODEMAN_AGENT_IMAGE_GIT_USER_NAME and
CODEMAN_AGENT_IMAGE_GIT_USER_EMAIL; test regex follows
- wiki Docker-Cases: mention the identity variables next to the gh/az
switches
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Codeman maintainer