mirror of
https://github.com/Ark0N/Codeman.git
synced 2026-10-10 01:09:43 +02:00
Codeman maintainer
0a63588716
A new Docker install was: clone (undocumented), copy .env.example by hand, fix an Unraid data path and a Perth time zone, replace `changeme`, run the start script, and then guess when the server was up. Start-Codeman.sh now does all of it from a fresh clone: - Preflight names the fix for a missing docker CLI, a missing or too-old Compose plugin (config --environment needs 2.27.2, docker/compose#11891), and an unreachable daemon (docker group, never sudo). - With no docker/.env, it asks three questions (data folder, port, password; Enter takes each default: ~/codeman-docker, 3000 or the next free port, a generated password) and writes docker/.env FROM the example, so every key the updater's diffRequiredEnvKeys expects is present. Mode 0600, host time zone, values Compose would interpolate single-quoted. Refuses $HOME, ~/.codeman (a native install's state dir) and anything inside the checkout (the image build context). --yes / no TTY take the defaults, --setup-only stops after writing the file. An existing .env is never edited, and root never runs the setup (Unraid keeps the hand route). - After `up`, it waits until the server answers (docker exec probe, crash loop caught by the restart count) and prints the URL, the LAN URL, the generated password and the logs/stop commands; --no-wait skips the wait. - `changeme` is refused before anything starts (the container publishes on every interface and holds the Docker socket); Update-Codeman.sh checks it before its build and down so the stack is never left stopped. - Compose settings are read with ONE config --environment call, with its error reported, instead of three silent ones. docker-compose.yaml and server.Dockerfile are untouched (their hashes gate the in-app updater), and .env.example changes values and comments only. Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
921 lines
37 KiB
Bash
921 lines
37 KiB
Bash
#!/usr/bin/env bash
|
|
#
|
|
# Sets up (on the first run) and starts the Docker Compose deployment.
|
|
#
|
|
# A new install is two commands, from a fresh clone:
|
|
#
|
|
# git clone https://github.com/Ark0N/Codeman.git && cd Codeman
|
|
# bash docker/Start-Codeman.sh
|
|
#
|
|
# With no docker/.env yet, this asks three questions (data folder, port,
|
|
# password; Enter takes the default each time), writes docker/.env from
|
|
# .env.example, builds the image, starts the container, waits until Codeman
|
|
# answers and prints the URL to open. Every later run (after a `git pull`, or
|
|
# when the in-app updater asks for it) skips the questions and rebuilds and
|
|
# restarts the stack.
|
|
#
|
|
# Usage: bash docker/Start-Codeman.sh [--yes] [--setup-only] [--no-wait]
|
|
# --yes, -y First run: take every default without asking. Also what
|
|
# happens when no terminal is attached.
|
|
# --setup-only Write docker/.env and stop, so it can be reviewed first.
|
|
# --no-wait Do not wait for Codeman to answer after starting it.
|
|
#
|
|
# A first run takes its defaults from CODEMAN_APPDATA_PATH, CODEMAN_PORT and
|
|
# CODEMAN_PASSWORD when they are set in the environment.
|
|
#
|
|
# Bash 3.2 clean on purpose: Docker Desktop on macOS runs this with
|
|
# /bin/bash 3.2 (no ${x,,}, mapfile, associative arrays or here-strings).
|
|
|
|
set -euo pipefail
|
|
|
|
script_dir=$(cd -- "$(dirname -- "${BASH_SOURCE[0]}")" && pwd)
|
|
env_file="$script_dir/.env"
|
|
example_file="$script_dir/.env.example"
|
|
compose_file="$script_dir/docker-compose.yaml"
|
|
|
|
assume_yes=0
|
|
setup_only=0
|
|
no_wait=0
|
|
for arg in "$@"; do
|
|
case "$arg" in
|
|
--yes | -y) assume_yes=1 ;;
|
|
--setup-only) setup_only=1 ;;
|
|
--no-wait) no_wait=1 ;;
|
|
--help | -h)
|
|
printf 'Usage: bash %s [--yes] [--setup-only] [--no-wait]\n' "$0"
|
|
printf ' --yes, -y First run: take every default without asking\n'
|
|
printf ' --setup-only Write docker/.env and stop, so it can be reviewed first\n'
|
|
printf ' --no-wait Do not wait for Codeman to answer after starting it\n'
|
|
exit 0
|
|
;;
|
|
*)
|
|
printf 'Error: unrecognised argument: %s\n' "$arg" >&2
|
|
printf 'Usage: bash %s [--yes] [--setup-only] [--no-wait]\n' "$0" >&2
|
|
exit 1
|
|
;;
|
|
esac
|
|
done
|
|
|
|
# ── Preflight ────────────────────────────────────────────────────────────────
|
|
# The three things a new machine most often lacks, each named with its fix
|
|
# before anything else runs (a missing daemon used to surface as a bare Compose
|
|
# error from the first `config` call below).
|
|
|
|
# PURE: is dotted version $1 older than $2? An unparseable $1 is never "older":
|
|
# the `config --environment` failure handler below still catches a real miss.
|
|
version_older_than() {
|
|
local re='^([0-9]+)\.([0-9]+)\.([0-9]+)'
|
|
local a b c x y z
|
|
[[ "$1" =~ $re ]] || return 1
|
|
a=$((10#${BASH_REMATCH[1]})) b=$((10#${BASH_REMATCH[2]})) c=$((10#${BASH_REMATCH[3]}))
|
|
[[ "$2" =~ $re ]] || return 1
|
|
x=$((10#${BASH_REMATCH[1]})) y=$((10#${BASH_REMATCH[2]})) z=$((10#${BASH_REMATCH[3]}))
|
|
if ((a != x)); then
|
|
((a < x))
|
|
return
|
|
fi
|
|
if ((b != y)); then
|
|
((b < y))
|
|
return
|
|
fi
|
|
((c < z))
|
|
}
|
|
|
|
# `docker compose config --environment`, which everything below reads the
|
|
# settings through, first shipped in Compose v2.27.2 (docker/compose#11891).
|
|
min_compose_version='2.27.2'
|
|
|
|
if ! command -v docker >/dev/null 2>&1; then
|
|
printf 'Error: Docker is not installed (no `docker` command on PATH).\n' >&2
|
|
printf 'Install Docker Engine (Linux: https://docs.docker.com/engine/install/) or\n' >&2
|
|
printf 'Docker Desktop (macOS, Windows), then rerun this script.\n' >&2
|
|
exit 1
|
|
fi
|
|
|
|
if ! docker compose version >/dev/null 2>&1; then
|
|
printf 'Error: the Docker Compose v2 plugin is missing (`docker compose version` failed).\n' >&2
|
|
if command -v docker-compose >/dev/null 2>&1; then
|
|
printf 'The standalone `docker-compose` found on PATH is not a substitute for it.\n' >&2
|
|
fi
|
|
printf 'Install it from https://docs.docker.com/compose/install/linux/\n' >&2
|
|
printf '(Debian/Ubuntu with Docker'"'"'s apt repository: sudo apt-get install docker-compose-plugin).\n' >&2
|
|
exit 1
|
|
fi
|
|
|
|
compose_version=$(docker compose version --short 2>/dev/null || true)
|
|
compose_version=${compose_version#v}
|
|
if version_older_than "$compose_version" "$min_compose_version"; then
|
|
printf 'Error: Docker Compose %s is too old; Codeman needs %s or newer.\n' \
|
|
"$compose_version" "$min_compose_version" >&2
|
|
printf 'Update the Compose plugin (https://docs.docker.com/compose/install/linux/), then rerun.\n' >&2
|
|
exit 1
|
|
fi
|
|
|
|
if ! docker_info_error=$(docker info --format '{{.ServerVersion}}' 2>&1 >/dev/null); then
|
|
case "$docker_info_error" in
|
|
*[Pp]ermission\ denied*)
|
|
account=$(id -un 2>/dev/null || printf 'your account')
|
|
printf 'Error: %s is not allowed to use Docker yet.\n' "$account" >&2
|
|
printf 'Add it to the docker group, then log out and back in (or run `newgrp docker`):\n' >&2
|
|
printf ' sudo usermod -aG docker %s\n' "$account" >&2
|
|
printf 'Prefer that over running this script with sudo: Codeman'"'"'s data folder has to\n' >&2
|
|
printf 'belong to a normal account, and a first run refuses to set it up as root.\n' >&2
|
|
;;
|
|
*)
|
|
printf 'Error: the Docker daemon is not reachable. Start it (Linux: sudo systemctl start\n' >&2
|
|
printf 'docker; macOS and Windows: open Docker Desktop), then rerun this script.\n' >&2
|
|
printf 'Docker said: %s\n' "$docker_info_error" >&2
|
|
;;
|
|
esac
|
|
exit 1
|
|
fi
|
|
|
|
# ── First-run setup ──────────────────────────────────────────────────────────
|
|
# Runs only while docker/.env does not exist, and never edits an existing one.
|
|
# The file is generated FROM .env.example (its KEY= lines rewritten in place),
|
|
# so every key the example sets is present: the in-app updater refuses an
|
|
# update while the user's .env lacks a key the target release's example sets
|
|
# (diffRequiredEnvKeys, src/web/self-update.ts), and a hand-picked subset would
|
|
# trip that on the very next release.
|
|
|
|
first_run=0
|
|
generated_password=''
|
|
|
|
is_interactive() {
|
|
[[ "$assume_yes" != '1' && "${CODEMAN_NONINTERACTIVE:-0}" != '1' && -t 0 ]]
|
|
}
|
|
|
|
# Reads one answer into $answer (with -s, without echo). End of input (Ctrl+D)
|
|
# cancels the setup rather than looping on a default that was just refused.
|
|
ask() {
|
|
if ! IFS= read -r "$@" answer; then
|
|
printf '\nSetup cancelled; nothing was written.\n' >&2
|
|
exit 1
|
|
fi
|
|
}
|
|
|
|
# True when something on this host already accepts connections on the port.
|
|
# bash's /dev/tcp needs no extra tool on Linux or macOS.
|
|
port_in_use() {
|
|
(exec 3<>"/dev/tcp/127.0.0.1/$1") 2>/dev/null || (exec 3<>"/dev/tcp/::1/$1") 2>/dev/null
|
|
}
|
|
|
|
first_free_port() {
|
|
local port=$1
|
|
local last=$(($1 + 99))
|
|
while ((port <= last)); do
|
|
if ! port_in_use "$port"; then
|
|
printf '%s' "$port"
|
|
return 0
|
|
fi
|
|
port=$((port + 1))
|
|
done
|
|
printf '%s' "$1"
|
|
}
|
|
|
|
host_timezone() {
|
|
local tz='' re='^[A-Za-z0-9_+/-]+$'
|
|
if [[ -r /etc/timezone ]]; then
|
|
tz=$(head -n1 /etc/timezone 2>/dev/null) || tz=''
|
|
fi
|
|
if [[ -z "$tz" ]] && command -v timedatectl >/dev/null 2>&1; then
|
|
tz=$(timedatectl show -p Timezone --value 2>/dev/null) || tz=''
|
|
fi
|
|
if [[ -z "$tz" && -L /etc/localtime ]]; then
|
|
tz=$(readlink /etc/localtime 2>/dev/null) || tz=''
|
|
tz=${tz##*zoneinfo/}
|
|
fi
|
|
if [[ ! "$tz" =~ $re ]]; then
|
|
tz='Etc/UTC'
|
|
fi
|
|
printf '%s' "$tz"
|
|
}
|
|
|
|
generate_password() {
|
|
local pw=''
|
|
# `|| true`: head closing the pipe early is the normal case, not a failure.
|
|
pw=$(LC_ALL=C tr -dc 'A-Za-z0-9' </dev/urandom 2>/dev/null | head -c 24) || true
|
|
if ((${#pw} != 24)) && command -v openssl >/dev/null 2>&1; then
|
|
pw=$(openssl rand -base64 48 | LC_ALL=C tr -dc 'A-Za-z0-9' | head -c 24) || true
|
|
fi
|
|
if ((${#pw} != 24)); then
|
|
printf 'Error: could not generate a password; set CODEMAN_PASSWORD and rerun.\n' >&2
|
|
exit 1
|
|
fi
|
|
printf '%s' "$pw"
|
|
}
|
|
|
|
# Compose reads .env values with its own dotenv rules: `$` interpolates and an
|
|
# unquoted ` #` starts a comment. A single-quoted value is taken literally, so
|
|
# anything beyond plain path characters is written that way (the accept_*
|
|
# checks below refuse the one character it cannot hold, a single quote).
|
|
env_quote() {
|
|
local re='^[A-Za-z0-9._/@:+-]*$'
|
|
if [[ "$1" =~ $re ]]; then
|
|
printf '%s' "$1"
|
|
else
|
|
printf "'%s'" "$1"
|
|
fi
|
|
}
|
|
|
|
repo_root=$(cd -- "$script_dir/.." && pwd)
|
|
|
|
# Sets setup_appdata, or says why the answer cannot be used and returns 1.
|
|
accept_appdata_path() {
|
|
local p=$1
|
|
case "$p" in
|
|
'~') p=$HOME ;;
|
|
'~/'*) p="$HOME/${p#\~/}" ;;
|
|
esac
|
|
while [[ "$p" == */ && "$p" != / ]]; do
|
|
p=${p%/}
|
|
done
|
|
case "$p" in
|
|
*"'"* | *$'\n'*)
|
|
printf ' The path cannot contain a single quote or a line break.\n' >&2
|
|
return 1
|
|
;;
|
|
esac
|
|
if [[ "$p" != /* ]]; then
|
|
printf ' Use an absolute path, one that starts with /.\n' >&2
|
|
return 1
|
|
fi
|
|
# The folder becomes the container's home directory, so its `.codeman` is
|
|
# the server's state directory: $HOME itself would share state.json with a
|
|
# Codeman installed directly on this machine.
|
|
if [[ "$p" == / || "$p" == "$HOME" ]]; then
|
|
printf ' Pick a folder of its own; it becomes the container'"'"'s home directory.\n' >&2
|
|
return 1
|
|
fi
|
|
if [[ "$p" == "$HOME/.codeman" || "$p" == "$HOME/.codeman/"* ]]; then
|
|
printf ' %s belongs to a Codeman installed directly on this machine; pick another folder.\n' "$HOME/.codeman" >&2
|
|
return 1
|
|
fi
|
|
# Inside the checkout it would sit in the image build context (COPY . .),
|
|
# CLI logins and all.
|
|
if [[ "$p" == "$repo_root" || "$p" == "$repo_root/"* ]]; then
|
|
printf ' Pick a folder outside %s; that folder is copied into the image when it is built.\n' "$repo_root" >&2
|
|
return 1
|
|
fi
|
|
setup_appdata=$p
|
|
}
|
|
|
|
accept_port() {
|
|
local re='^[0-9]+$'
|
|
if [[ ! "$1" =~ $re ]] || ((10#$1 < 1 || 10#$1 > 65535)); then
|
|
printf ' Use a port number from 1 to 65535.\n' >&2
|
|
return 1
|
|
fi
|
|
setup_port=$((10#$1))
|
|
}
|
|
|
|
accept_password() {
|
|
case "$1" in
|
|
*"'"* | *$'\n'*)
|
|
printf ' The password cannot contain a single quote or a line break.\n' >&2
|
|
return 1
|
|
;;
|
|
esac
|
|
if ((${#1} < 8)); then
|
|
printf ' Use at least 8 characters.\n' >&2
|
|
return 1
|
|
fi
|
|
if [[ "$1" == 'changeme' ]]; then
|
|
printf ' That is the published example password; pick another.\n' >&2
|
|
return 1
|
|
fi
|
|
setup_password=$1
|
|
}
|
|
|
|
write_env_file() {
|
|
local tmp="$env_file.tmp.$$" line
|
|
(
|
|
umask 077
|
|
{
|
|
printf '# Written by Start-Codeman.sh on its first run, from .env.example.\n'
|
|
printf '# Change any value here, then rerun: bash docker/Start-Codeman.sh\n'
|
|
printf '\n'
|
|
while IFS= read -r line || [[ -n "$line" ]]; do
|
|
case "$line" in
|
|
TZ=*) printf 'TZ=%s\n' "$(env_quote "$setup_tz")" ;;
|
|
CODEMAN_APPDATA_PATH=*) printf 'CODEMAN_APPDATA_PATH=%s\n' "$(env_quote "$setup_appdata")" ;;
|
|
CODEMAN_CASES_PATH=*) printf 'CODEMAN_CASES_PATH=%s\n' "$(env_quote "$setup_cases")" ;;
|
|
CODEMAN_PORT=*) printf 'CODEMAN_PORT=%s\n' "$setup_port" ;;
|
|
CODEMAN_PASSWORD=*) printf 'CODEMAN_PASSWORD=%s\n' "$(env_quote "$setup_password")" ;;
|
|
*) printf '%s\n' "$line" ;;
|
|
esac
|
|
done <"$example_file"
|
|
} >"$tmp"
|
|
)
|
|
chmod 600 "$tmp"
|
|
mv -- "$tmp" "$env_file"
|
|
}
|
|
|
|
run_first_run_setup() {
|
|
local answer again default_appdata default_port port_note='' password_note username
|
|
if [[ "$EUID" == '0' ]]; then
|
|
printf 'Error: %s does not exist yet, and the first-run setup does not run as root.\n' "$env_file" >&2
|
|
printf 'Run it as the normal account that should own Codeman'"'"'s data (that account\n' >&2
|
|
printf 'needs to be in the docker group). On a root-only host such as Unraid, copy\n' >&2
|
|
printf '%s to %s by hand instead,\n' "$example_file" "$env_file" >&2
|
|
printf 'point CODEMAN_APPDATA_PATH at a folder an unprivileged account owns, set\n' >&2
|
|
printf 'CODEMAN_PASSWORD, and rerun.\n' >&2
|
|
exit 1
|
|
fi
|
|
if [[ ! -f "$example_file" ]]; then
|
|
printf 'Error: %s is missing, so there is nothing to build docker/.env from.\n' "$example_file" >&2
|
|
exit 1
|
|
fi
|
|
|
|
default_appdata=${CODEMAN_APPDATA_PATH:-$HOME/codeman-docker}
|
|
if [[ -n "${CODEMAN_PORT:-}" ]]; then
|
|
default_port=$CODEMAN_PORT
|
|
else
|
|
default_port=$(first_free_port 3000)
|
|
if [[ "$default_port" != '3000' ]]; then
|
|
port_note=' (3000 is already taken on this machine)'
|
|
fi
|
|
fi
|
|
setup_tz=$(host_timezone)
|
|
username=$(sed -n 's/^CODEMAN_USERNAME=//p' "$example_file" | head -n1)
|
|
|
|
printf '\nCodeman Docker setup\n'
|
|
printf 'There is no docker/.env yet, so this first run writes one. Enter takes the [default].\n\n'
|
|
|
|
if is_interactive; then
|
|
while :; do
|
|
printf ' Data folder (state, CLI logins, projects) [%s]: ' "$default_appdata"
|
|
ask
|
|
if [[ -z "$answer" ]]; then
|
|
answer=$default_appdata
|
|
fi
|
|
if accept_appdata_path "$answer"; then
|
|
break
|
|
fi
|
|
done
|
|
while :; do
|
|
printf ' Port [%s]%s: ' "$default_port" "$port_note"
|
|
ask
|
|
if [[ -z "$answer" ]]; then
|
|
answer=$default_port
|
|
fi
|
|
if accept_port "$answer"; then
|
|
break
|
|
fi
|
|
done
|
|
if [[ -n "${CODEMAN_PASSWORD:-}" ]]; then
|
|
accept_password "$CODEMAN_PASSWORD" || exit 1
|
|
printf ' Password: taken from CODEMAN_PASSWORD\n'
|
|
else
|
|
while :; do
|
|
printf ' Password [Enter generates a strong one]: '
|
|
ask -s
|
|
printf '\n'
|
|
if [[ -z "$answer" ]]; then
|
|
setup_password=$(generate_password)
|
|
generated_password=$setup_password
|
|
break
|
|
fi
|
|
if ! accept_password "$answer"; then
|
|
continue
|
|
fi
|
|
printf ' Repeat the password: '
|
|
again=$answer
|
|
ask -s
|
|
printf '\n'
|
|
if [[ "$again" == "$answer" ]]; then
|
|
break
|
|
fi
|
|
printf ' The two entries differ; try again.\n' >&2
|
|
done
|
|
fi
|
|
else
|
|
printf ' No questions asked (no terminal attached, or --yes): taking the defaults.\n'
|
|
accept_appdata_path "$default_appdata" || exit 1
|
|
accept_port "$default_port" || exit 1
|
|
if [[ -n "${CODEMAN_PASSWORD:-}" ]]; then
|
|
accept_password "$CODEMAN_PASSWORD" || exit 1
|
|
else
|
|
setup_password=$(generate_password)
|
|
generated_password=$setup_password
|
|
fi
|
|
fi
|
|
|
|
if port_in_use "$setup_port"; then
|
|
printf ' Note: something on this machine already listens on port %s, so starting will\n' "$setup_port" >&2
|
|
printf ' fail until it stops or CODEMAN_PORT in docker/.env names a free port.\n' >&2
|
|
fi
|
|
|
|
setup_cases="$setup_appdata/codeman-cases"
|
|
write_env_file
|
|
first_run=1
|
|
|
|
if [[ -n "$generated_password" ]]; then
|
|
password_note="$generated_password (generated; shown again once Codeman is up)"
|
|
else
|
|
password_note='the one you chose'
|
|
fi
|
|
printf '\nWrote %s (readable only by you):\n' "$env_file"
|
|
printf ' Data folder %s\n' "$setup_appdata"
|
|
printf ' Projects %s\n' "$setup_cases"
|
|
printf ' Port %s\n' "$setup_port"
|
|
printf ' Time zone %s\n' "$setup_tz"
|
|
printf ' Username %s\n' "${username:-admin}"
|
|
printf ' Password %s\n' "$password_note"
|
|
printf 'Everything else in it is optional (Git identity, private repositories, reverse\n'
|
|
printf 'proxy); docker/README.md explains each setting.\n\n'
|
|
}
|
|
|
|
if [[ ! -f "$env_file" ]]; then
|
|
run_first_run_setup
|
|
elif [[ "$setup_only" == '1' ]]; then
|
|
printf '%s already exists; the setup only runs when it does not, and never edits it.\n' "$env_file"
|
|
fi
|
|
|
|
if [[ "$setup_only" == '1' ]]; then
|
|
printf 'Start Codeman with: bash %s\n' "$script_dir/Start-Codeman.sh"
|
|
exit 0
|
|
fi
|
|
|
|
# Naming a Compose file explicitly disables Compose's automatic discovery of
|
|
# the override file, so it has to be added back by hand. Without this, local
|
|
# customisation in docker-compose.override.yml is silently ignored. The
|
|
# candidates are checked in Compose's own precedence order - measured on
|
|
# Compose v5.5.0 with both present: it uses `.yml` and ignores `.yaml`.
|
|
override_yml="$script_dir/docker-compose.override.yml"
|
|
override_yaml="$script_dir/docker-compose.override.yaml"
|
|
if [[ -f "$override_yml" && -f "$override_yaml" ]]; then
|
|
printf 'Warning: both %s and %s exist; Compose uses .yml and ignores .yaml.\n' \
|
|
"$override_yml" "$override_yaml" >&2
|
|
fi
|
|
compose_files=(-f "$compose_file")
|
|
for override_file in "$override_yml" "$override_yaml"; do
|
|
if [[ -f "$override_file" ]]; then
|
|
compose_files+=(-f "$override_file")
|
|
printf 'Using Compose override file: %s\n' "$override_file"
|
|
break
|
|
fi
|
|
done
|
|
compose_command=(docker compose --env-file "$env_file" "${compose_files[@]}")
|
|
|
|
# Every setting is read through Compose's own resolution (shell environment over
|
|
# .env, quoting, interpolation), once. A failure is reported here with what
|
|
# Compose said, instead of `set -e` ending the script at an empty value.
|
|
compose_stderr=$(mktemp "${TMPDIR:-/tmp}/codeman-compose.XXXXXX")
|
|
if ! compose_environment=$("${compose_command[@]}" config --environment 2>"$compose_stderr"); then
|
|
if grep -q -- 'unknown flag: --environment' "$compose_stderr"; then
|
|
printf 'Error: this Docker Compose (%s) is too old; Codeman needs %s or newer.\n' \
|
|
"${compose_version:-unknown version}" "$min_compose_version" >&2
|
|
else
|
|
cat -- "$compose_stderr" >&2
|
|
printf 'Error: `docker compose config` could not read %s and the Compose files (see above).\n' "$env_file" >&2
|
|
fi
|
|
rm -f -- "$compose_stderr"
|
|
exit 1
|
|
fi
|
|
# Compose's own warnings (an unset variable, say) still reach the terminal, once.
|
|
cat -- "$compose_stderr" >&2
|
|
rm -f -- "$compose_stderr"
|
|
|
|
# No early `exit` in the awk program: it reads all of its input, so printf never
|
|
# meets a closed pipe (a SIGPIPE would end the script under pipefail).
|
|
compose_env_value() {
|
|
printf '%s\n' "$compose_environment" |
|
|
awk -F= -v key="$1" '$1 == key && !found { sub(/^[^=]*=/, ""); print; found = 1 }'
|
|
}
|
|
appdata_path=$(compose_env_value CODEMAN_APPDATA_PATH)
|
|
cases_path=$(compose_env_value CODEMAN_CASES_PATH)
|
|
docker_socket=$(compose_env_value DOCKER_SOCKET)
|
|
codeman_port=$(compose_env_value CODEMAN_PORT)
|
|
codeman_username=$(compose_env_value CODEMAN_USERNAME)
|
|
codeman_password=$(compose_env_value CODEMAN_PASSWORD)
|
|
|
|
# The container publishes its port on every interface and holds the host's
|
|
# Docker socket, so whoever signs in to Codeman can run anything on this host.
|
|
# The example's placeholder is a published password: refuse it outright.
|
|
if [[ "$codeman_password" == 'changeme' ]]; then
|
|
printf 'Error: CODEMAN_PASSWORD is still the example value "changeme".\n' >&2
|
|
printf 'Codeman is reachable from your network and controls Docker on this machine, so\n' >&2
|
|
printf 'set a real password in %s, then rerun this script.\n' "$env_file" >&2
|
|
exit 1
|
|
fi
|
|
if [[ -z "$codeman_password" ]]; then
|
|
printf 'Warning: CODEMAN_PASSWORD is empty, so anyone who can reach port %s can use Codeman,\n' "${codeman_port:-?}" >&2
|
|
printf 'which controls Docker on this machine. Set one in %s unless something in front of it\n' "$env_file" >&2
|
|
printf 'already asks for a login.\n' >&2
|
|
fi
|
|
unset codeman_password
|
|
|
|
if [[ -z "$appdata_path" ]]; then
|
|
printf 'Error: CODEMAN_APPDATA_PATH is not set in %s\n' "$env_file" >&2
|
|
exit 1
|
|
fi
|
|
|
|
if [[ ! -d "$appdata_path" ]]; then
|
|
if [[ "$EUID" == '0' ]]; then
|
|
printf 'Error: Refusing to create CODEMAN_APPDATA_PATH as root: %s\n' "$appdata_path" >&2
|
|
printf 'Create it as the unprivileged account that should run Codeman, then retry.\n' >&2
|
|
exit 1
|
|
fi
|
|
if ! mkdir -p -- "$appdata_path"; then
|
|
printf 'Error: cannot create CODEMAN_APPDATA_PATH: %s\n' "$appdata_path" >&2
|
|
printf 'Create it as the account that should run Codeman, or pick another folder in %s.\n' "$env_file" >&2
|
|
exit 1
|
|
fi
|
|
fi
|
|
|
|
if [[ -z "$cases_path" ]]; then
|
|
printf 'Error: CODEMAN_CASES_PATH is not set in %s\n' "$env_file" >&2
|
|
exit 1
|
|
fi
|
|
|
|
# `stat -c` is GNU, `stat -f` is BSD/macOS; the bind sources live on the Docker
|
|
# host, so both need to work.
|
|
owner_of() {
|
|
stat -c '%u:%g' -- "$1" 2>/dev/null || stat -f '%u:%g' "$1" 2>/dev/null
|
|
}
|
|
|
|
if ! owner_ids=$(owner_of "$appdata_path"); then
|
|
printf 'Error: Cannot determine the owner of CODEMAN_APPDATA_PATH: %s\n' "$appdata_path" >&2
|
|
exit 1
|
|
fi
|
|
|
|
export PUID=${owner_ids%%:*}
|
|
export PGID=${owner_ids##*:}
|
|
|
|
if [[ "$PUID" == '0' ]]; then
|
|
printf 'Error: CODEMAN_APPDATA_PATH is owned by root: %s\n' "$appdata_path" >&2
|
|
printf 'Change the directory ownership to the unprivileged account that should run Codeman.\n' >&2
|
|
exit 1
|
|
fi
|
|
|
|
# Pre-creating this here, exactly like CODEMAN_APPDATA_PATH above, means Compose
|
|
# never has to materialise a missing bind source itself - which it does as
|
|
# root:root - so the in-container entrypoint's chown never has to run for this
|
|
# path at all. It happens AFTER PUID/PGID are known (they come from the appdata
|
|
# directory just above) so the new directory can be given that exact owner: a
|
|
# plain `mkdir -p` lands as the invoking user's uid and PRIMARY gid, and on a
|
|
# host set up the way the README suggests (`chown -R 99:100 <appdata>`) that gid
|
|
# is not PGID, which the container would then refuse to run on. Unlike appdata,
|
|
# an EXISTING cases directory is left exactly as it is: the README explicitly
|
|
# allows pointing this at a normal projects directory the host account already
|
|
# owns, and the container checks that it is WRITABLE as PUID:PGID rather than
|
|
# who owns it.
|
|
if [[ ! -d "$cases_path" ]]; then
|
|
mkdir -p -- "$cases_path"
|
|
if [[ "$(owner_of "$cases_path")" != "$PUID:$PGID" ]]; then
|
|
# As root this always succeeds; as a member of PGID a chgrp does; anyone
|
|
# else gets the clear error here, where the fix is obvious, rather than a
|
|
# restart loop from the container.
|
|
if ! chown -- "$PUID:$PGID" "$cases_path" 2>/dev/null; then
|
|
printf 'Error: created CODEMAN_CASES_PATH (%s) but could not make it %s:%s (the owner of CODEMAN_APPDATA_PATH).\n' \
|
|
"$cases_path" "$PUID" "$PGID" >&2
|
|
printf 'Run `chown %s:%s %s` as root, or create the directory as that account, then retry.\n' \
|
|
"$PUID" "$PGID" "$cases_path" >&2
|
|
exit 1
|
|
fi
|
|
fi
|
|
fi
|
|
|
|
if [[ -z "$docker_socket" || ! -S "$docker_socket" ]]; then
|
|
printf 'Error: DOCKER_SOCKET is not a Unix socket: %s\n' "${docker_socket:-<unset>}" >&2
|
|
printf 'Set DOCKER_SOCKET in %s to the socket your Docker daemon listens on.\n' "$env_file" >&2
|
|
exit 1
|
|
fi
|
|
|
|
if socket_ids=$(stat -c '%u:%g' -- "$docker_socket" 2>/dev/null); then
|
|
:
|
|
elif socket_ids=$(stat -f '%u:%g' "$docker_socket" 2>/dev/null); then
|
|
:
|
|
else
|
|
printf 'Error: Cannot determine the owner of DOCKER_SOCKET: %s\n' "$docker_socket" >&2
|
|
exit 1
|
|
fi
|
|
|
|
export DOCKER_SOCKET_GID=${socket_ids##*:}
|
|
|
|
repo_path=${CODEMAN_REPO_PATH:-$(cd -- "$script_dir/.." && pwd)}
|
|
if [[ ! -d "$repo_path" ]]; then
|
|
printf 'Error: CODEMAN_REPO_PATH is not a directory: %s\n' "$repo_path" >&2
|
|
exit 1
|
|
fi
|
|
export CODEMAN_REPO_PATH="$repo_path"
|
|
|
|
# The in-app updater runs `git checkout` and `npm install` against this checkout
|
|
# as PUID:PGID. If the directory belongs to someone else, git refuses outright
|
|
# ("detected dubious ownership") and the update fails at the first step — so warn
|
|
# here, where the fix is obvious, rather than in a failed update hours later.
|
|
if repo_owner=$(stat -c '%u' -- "$repo_path" 2>/dev/null || stat -f '%u' "$repo_path" 2>/dev/null); then
|
|
if [[ "$repo_owner" != "$PUID" ]]; then
|
|
printf 'Warning: %s is owned by UID %s but Codeman runs as UID %s.\n' "$repo_path" "$repo_owner" "$PUID" >&2
|
|
printf 'In-app updates will fail until the ownership matches. Codeman itself still starts.\n' >&2
|
|
fi
|
|
fi
|
|
|
|
if [[ ! -d "$repo_path/.git" ]]; then
|
|
printf 'Note: %s is not a git checkout, so in-app updates are unavailable.\n' "$repo_path" >&2
|
|
fi
|
|
|
|
# Reads HEAD without requiring a `git` binary on the host — this script
|
|
# otherwise checks the checkout only by testing for `.git` as a directory, and
|
|
# resolving refs by hand keeps that the same "no host git needed" guarantee.
|
|
# ⚠️ A worktree checkout has `.git` as a FILE (`gitdir: <path>`), not a
|
|
# directory, so this returns nothing there and the volume-refresh check below
|
|
# silently no-ops — consistent with the `-d .git` test used everywhere else in
|
|
# this script, not a special case, but worth knowing if a worktree checkout
|
|
# stops picking up a stale-volume refresh it should have caught.
|
|
git_head_commit() {
|
|
local git_dir="$1/.git" head_ref ref_path
|
|
[[ -d "$git_dir" ]] || return 1
|
|
head_ref=$(cat -- "$git_dir/HEAD" 2>/dev/null) || return 1
|
|
if [[ "$head_ref" == ref:* ]]; then
|
|
ref_path="${head_ref#ref: }"
|
|
if [[ -f "$git_dir/$ref_path" ]]; then
|
|
cat -- "$git_dir/$ref_path"
|
|
else
|
|
# Packed after a `git gc`; the loose ref file above is gone.
|
|
awk -v ref="$ref_path" '$2 == ref { print $1; exit }' "$git_dir/packed-refs" 2>/dev/null
|
|
fi
|
|
else
|
|
printf '%s' "$head_ref"
|
|
fi
|
|
}
|
|
|
|
# Record what the container is about to be built and created FROM. The in-app
|
|
# updater compares these against the release it wants to apply: a release that
|
|
# changes either file cannot be applied by the container restarting itself (a
|
|
# restart reuses the existing image and config), so it is refused and the user
|
|
# is sent back here. Written on every start, so the baseline always describes
|
|
# the container that is actually running. See docs/docker-self-update.md.
|
|
if command -v sha256sum >/dev/null 2>&1; then
|
|
sha256_of() { sha256sum -- "$1" | cut -d' ' -f1; }
|
|
elif command -v shasum >/dev/null 2>&1; then
|
|
sha256_of() { shasum -a 256 -- "$1" | cut -d' ' -f1; }
|
|
else
|
|
sha256_of() { printf ''; }
|
|
fi
|
|
|
|
dockerfile_sha=$(sha256_of "$script_dir/server.Dockerfile")
|
|
compose_sha=$(sha256_of "$compose_file")
|
|
if [[ -n "$dockerfile_sha" && -n "$compose_sha" ]]; then
|
|
# $CODEMAN_APPDATA_PATH is mounted at the runtime account's home, so this is
|
|
# dataPath('docker-env-applied.json') as the server inside the container sees it.
|
|
state_dir="$appdata_path/.codeman"
|
|
mkdir -p -- "$state_dir"
|
|
printf '{\n "dockerfileSha256": "%s",\n "composeSha256": "%s"\n}\n' \
|
|
"$dockerfile_sha" "$compose_sha" >"$state_dir/docker-env-applied.json.tmp"
|
|
mv -- "$state_dir/docker-env-applied.json.tmp" "$state_dir/docker-env-applied.json"
|
|
# A root-run start (common on Unraid) would otherwise leave a root-owned
|
|
# `.codeman` on a FIRST start, before the container has created it as PUID,
|
|
# and the unprivileged server could then never write its own state there.
|
|
if [[ "$EUID" == '0' ]]; then
|
|
chown -- "$PUID:$PGID" "$state_dir" "$state_dir/docker-env-applied.json"
|
|
fi
|
|
else
|
|
printf 'Warning: no sha256 tool found; in-app updates will not detect environment changes.\n' >&2
|
|
fi
|
|
|
|
# ── Start, then wait until Codeman answers ──────────────────────────────────
|
|
# `up -d` returns as soon as the container exists, which says nothing about the
|
|
# server inside it. The wait asks the server itself through `docker exec` (the
|
|
# same request as the compose healthcheck, which first runs only after its 30 s
|
|
# interval), notices a crash loop by the restart count moving, and ends on the
|
|
# URL to open. Docker's own view works with any network setup, macvlan included.
|
|
|
|
logs_hint="cd $(printf '%q' "$script_dir") && docker compose logs -f codeman"
|
|
|
|
# Docker's own output above says what broke; this adds the next step. A first
|
|
# build fetches hundreds of packages, so a network hiccup is the usual cause of
|
|
# a failed build, and a rerun picks up from Docker's layer cache.
|
|
compose_failed() {
|
|
printf '\nError: `docker compose %s` failed (see the output above).\n' "$1" >&2
|
|
case "$1" in
|
|
build)
|
|
printf 'A network hiccup while building is the usual cause; rerunning this script\n' >&2
|
|
printf 'resumes from Docker'"'"'s cache.\n' >&2
|
|
;;
|
|
*--build*)
|
|
printf 'If it stopped while building the image, a network hiccup is the usual cause,\n' >&2
|
|
printf 'and rerunning this script resumes from Docker'"'"'s cache.\n' >&2
|
|
;;
|
|
esac
|
|
exit 1
|
|
}
|
|
|
|
lan_ip() {
|
|
local ip=''
|
|
if [[ "$(uname -s)" == 'Darwin' ]]; then
|
|
ip=$(ipconfig getifaddr en0 2>/dev/null || ipconfig getifaddr en1 2>/dev/null) || ip=''
|
|
else
|
|
# The address the default route leaves from: the first one `hostname -I`
|
|
# lists is often docker0 or a VPN interface.
|
|
ip=$(ip -4 route get 1.1.1.1 2>/dev/null | sed -n 's/.* src \([0-9.]*\).*/\1/p') || ip=''
|
|
ip=${ip%%$'\n'*}
|
|
if [[ -z "$ip" ]]; then
|
|
ip=$(hostname -I 2>/dev/null) || ip=''
|
|
ip=${ip%% *}
|
|
fi
|
|
fi
|
|
printf '%s' "$ip"
|
|
}
|
|
|
|
print_access_summary() {
|
|
local cid=$1 published host_port bind_host lan addresses dir_q
|
|
dir_q=$(printf '%q' "$script_dir")
|
|
published=$("${compose_command[@]}" port codeman "$codeman_port" 2>/dev/null) || published=''
|
|
published=${published%%$'\n'*}
|
|
printf '\n'
|
|
if [[ -n "$published" ]]; then
|
|
host_port=${published##*:}
|
|
bind_host=${published%:*}
|
|
printf ' Open http://localhost:%s\n' "$host_port"
|
|
case "$bind_host" in
|
|
127.0.0.1 | '[::1]' | ::1) ;;
|
|
*)
|
|
lan=$(lan_ip)
|
|
if [[ -n "$lan" ]]; then
|
|
printf ' http://%s:%s (from other devices on your network)\n' "$lan" "$host_port"
|
|
fi
|
|
;;
|
|
esac
|
|
else
|
|
addresses=$(docker inspect --format '{{range .NetworkSettings.Networks}}{{.IPAddress}} {{end}}' "$cid" 2>/dev/null) || addresses=''
|
|
printf ' Open http://<container address>:%s (no host port is published; container addresses: %s)\n' \
|
|
"$codeman_port" "${addresses:-unknown}"
|
|
fi
|
|
printf ' Sign in %s, with the CODEMAN_PASSWORD from %s\n' "${codeman_username:-admin}" "$env_file"
|
|
if [[ -n "$generated_password" ]]; then
|
|
printf ' Password %s (generated on this first run)\n' "$generated_password"
|
|
fi
|
|
if [[ "$first_run" == '1' ]]; then
|
|
printf '\n Next: start a session from the dashboard and log its CLI in once. Logins are\n'
|
|
printf ' kept in %s, so they survive rebuilds.\n' "$appdata_path"
|
|
fi
|
|
printf '\n'
|
|
printf ' Logs cd %s && docker compose logs -f codeman\n' "$dir_q"
|
|
printf ' Stop cd %s && docker compose down\n' "$dir_q"
|
|
printf ' Update App Settings > Updates in the dashboard, or rerun this script\n'
|
|
}
|
|
|
|
report_when_ready() {
|
|
local cid state status health restarts first_restarts='' waited=0 limit=180 probe dots=0
|
|
cid=$("${compose_command[@]}" ps -q codeman 2>/dev/null) || cid=''
|
|
cid=${cid%%$'\n'*}
|
|
if [[ -z "$cid" ]]; then
|
|
printf 'Error: Compose started no codeman container. Look at: %s\n' "$logs_hint" >&2
|
|
return 1
|
|
fi
|
|
if [[ "$no_wait" == '1' ]]; then
|
|
printf '\nCodeman is starting (--no-wait given, so not waiting for it).\n'
|
|
print_access_summary "$cid"
|
|
return 0
|
|
fi
|
|
if [[ -t 1 ]]; then
|
|
dots=1
|
|
fi
|
|
probe="fetch('http://127.0.0.1:${codeman_port}/api/status').then((r) => process.exit(r.status < 500 ? 0 : 1)).catch(() => process.exit(1))"
|
|
printf 'Waiting for Codeman to answer...'
|
|
while :; do
|
|
state=$(docker inspect --format '{{.State.Status}}|{{if .State.Health}}{{.State.Health.Status}}{{end}}|{{.RestartCount}}' "$cid" 2>/dev/null) || state='missing||0'
|
|
status=${state%%|*}
|
|
health=${state#*|}
|
|
health=${health%%|*}
|
|
restarts=${state##*|}
|
|
if [[ -z "$first_restarts" ]]; then
|
|
first_restarts=$restarts
|
|
fi
|
|
if [[ "$health" == 'healthy' ]] ||
|
|
{ [[ "$status" == 'running' ]] && docker exec "$cid" node -e "$probe" >/dev/null 2>&1; }; then
|
|
printf ' ready.\n'
|
|
print_access_summary "$cid"
|
|
return 0
|
|
fi
|
|
if [[ "$status" == 'exited' || "$status" == 'dead' || "$status" == 'missing' || "$status" == 'restarting' ||
|
|
"$health" == 'unhealthy' || "$restarts" != "$first_restarts" ]]; then
|
|
printf '\n'
|
|
printf 'Error: Codeman did not come up (container %s). Its last log lines:\n\n' "${status:-unknown}" >&2
|
|
"${compose_command[@]}" logs --tail 40 codeman >&2 || true
|
|
printf '\nFollow the full log with: %s\n' "$logs_hint" >&2
|
|
return 1
|
|
fi
|
|
if ((waited >= limit)); then
|
|
printf '\n'
|
|
printf 'Warning: Codeman has not answered after %s seconds. It may still be starting;\n' "$limit" >&2
|
|
printf 'follow it with: %s\n' "$logs_hint" >&2
|
|
return 1
|
|
fi
|
|
if ((dots)); then
|
|
printf '.'
|
|
fi
|
|
sleep 2
|
|
waited=$((waited + 2))
|
|
done
|
|
}
|
|
|
|
if [[ "$first_run" == '1' ]]; then
|
|
printf 'Building the image. The first build downloads and compiles everything and takes a\n'
|
|
printf 'few minutes; later starts reuse most of it.\n'
|
|
fi
|
|
|
|
# codeman-node-modules and codeman-dist (docker-compose.yaml) are seeded from
|
|
# the image only while EMPTY, so a rebuilt image's fresh output sits unused
|
|
# behind old volume content until something clears it. The in-app self-updater
|
|
# never hits this — it rebuilds INSIDE the running container, into the very
|
|
# volume already in use — but a `docker compose build` triggered from outside
|
|
# it (this script, after a `git pull`) does: the container comes back up
|
|
# looking unchanged. Detect that here and clear just the affected volume(s) so
|
|
# the build below actually takes effect. Best-effort: with no sha256 tool this
|
|
# quietly does nothing, same as the environment-gate block above.
|
|
volumes_to_refresh=()
|
|
if [[ -n "$dockerfile_sha" ]]; then
|
|
repo_head=$(git_head_commit "$repo_path" || true)
|
|
lockfile_sha=$(sha256_of "$repo_path/package-lock.json" 2>/dev/null || true)
|
|
source_state_file="$state_dir/docker-build-source.json"
|
|
prev_head=''
|
|
prev_lockfile_sha=''
|
|
if [[ -f "$source_state_file" ]]; then
|
|
prev_head=$(sed -n 's/.*"headCommit": *"\([^"]*\)".*/\1/p' "$source_state_file")
|
|
prev_lockfile_sha=$(sed -n 's/.*"lockfileSha256": *"\([^"]*\)".*/\1/p' "$source_state_file")
|
|
fi
|
|
|
|
[[ -n "$repo_head" && "$repo_head" != "$prev_head" ]] && volumes_to_refresh+=('codeman-dist')
|
|
[[ -n "$lockfile_sha" && "$lockfile_sha" != "$prev_lockfile_sha" ]] && volumes_to_refresh+=('codeman-node-modules')
|
|
fi
|
|
|
|
if [[ ${#volumes_to_refresh[@]} -eq 0 ]]; then
|
|
"${compose_command[@]}" up --build -d || compose_failed 'up --build'
|
|
report_when_ready || exit 1
|
|
exit 0
|
|
fi
|
|
|
|
# Runs even on this script's very first invocation against an EXISTING
|
|
# deployment, deliberately: that deployment's volumes may already be stale
|
|
# (there was no earlier version of this check to have caught it), and clearing
|
|
# an already-empty or nonexistent volume is a harmless no-op, so there is no
|
|
# fresh-install case this needs to avoid.
|
|
printf 'Source changed since the last start; refreshing: %s\n' "${volumes_to_refresh[*]}"
|
|
|
|
# Build BEFORE taking the stack down: the image build is the slow part and needs
|
|
# no container stopped, so the deployment is offline only for the recreate.
|
|
"${compose_command[@]}" build || compose_failed build
|
|
|
|
# `com.docker.compose.volume` is the volume KEY, not a project-qualified name -
|
|
# a second stack on the same host (a beta instance started with a different
|
|
# COMPOSE_PROJECT_NAME, say) that also declares a volume keyed `codeman-dist`
|
|
# shares that label, and `head -n1` would pick whichever the daemon happens to
|
|
# list first. Scope the lookup to THIS stack's own resolved project name so it
|
|
# can only ever match this stack's volume. The name is read from the resolved
|
|
# config's top-level `name` key, indentation-agnostic (the formatting is not a
|
|
# contract), and the FIRST `name` in the output is the project's: nested ones
|
|
# (a network's `name:`) come later. `--format json` needs Compose v2.3+.
|
|
project_name=$(
|
|
"${compose_command[@]}" config --format json 2>/dev/null |
|
|
sed -n 's/^[[:space:]]*"name":[[:space:]]*"\([^"]*\)".*$/\1/p' | head -n1
|
|
)
|
|
|
|
"${compose_command[@]}" down
|
|
|
|
# Track whether the volumes were actually cleared. The marker below is written
|
|
# ONLY on success: with an unresolvable project name the label filter would
|
|
# match nothing, nothing would be removed, and a marker recording the new HEAD
|
|
# would stop this check from ever firing again while the stale volume kept
|
|
# serving old code. A failed removal likewise leaves the marker alone, so the
|
|
# next start retries, and the stack is brought back up regardless rather than
|
|
# left down.
|
|
refreshed=1
|
|
if [[ -z "$project_name" ]]; then
|
|
# The documented reset (docs/docker-self-update.md): both volumes re-seed from
|
|
# the image by a plain copy, so clearing the extra one costs a copy, not data.
|
|
printf 'Warning: could not resolve the Compose project name; clearing both build-artefact volumes with `down --volumes` instead.\n' >&2
|
|
"${compose_command[@]}" down --volumes || refreshed=0
|
|
else
|
|
for key in "${volumes_to_refresh[@]}"; do
|
|
volume_name=$(
|
|
docker volume ls -q \
|
|
--filter "label=com.docker.compose.volume=$key" \
|
|
--filter "label=com.docker.compose.project=$project_name" |
|
|
head -n1
|
|
)
|
|
if [[ -n "$volume_name" ]] && ! docker volume rm -- "$volume_name"; then
|
|
printf 'Warning: could not remove volume %s; it will be retried on the next start.\n' "$volume_name" >&2
|
|
refreshed=0
|
|
fi
|
|
done
|
|
fi
|
|
|
|
if [[ "$refreshed" == '1' ]]; then
|
|
printf '{\n "headCommit": "%s",\n "lockfileSha256": "%s"\n}\n' \
|
|
"$repo_head" "$lockfile_sha" >"$source_state_file.tmp"
|
|
mv -- "$source_state_file.tmp" "$source_state_file"
|
|
if [[ "$EUID" == '0' ]]; then
|
|
chown -- "$PUID:$PGID" "$source_state_file"
|
|
fi
|
|
else
|
|
printf 'Warning: the build-artefact volumes were NOT refreshed; the container may serve stale code until the next successful start.\n' >&2
|
|
fi
|
|
|
|
# Already built above, so no --build here: a second build would only re-check
|
|
# the cache.
|
|
"${compose_command[@]}" up -d || compose_failed up
|
|
report_when_ready || exit 1
|