Two follow-ups to db93491 (the 2026-06 CC meta.json format change), after
reverse-engineering the new on-disk layout with a live current-CC subagent +
1Hz fs poller:
(1) Workflow recursion — the Workflow tool nests its agents at
subagents/workflows/{wf}/agent-{id}.jsonl, one level below the flat
subagents/ scan, so they were never tracked. Add watchWorkflowDirs()
(driven from scanForSubagents) to descend and watch each workflow dir
(idempotent; fs.watch recursive is unsupported on Linux, so the ~5s
periodic scan re-drives it — same latency as new-session discovery).
Require the `agent-` prefix in the flat readdir + watch callback so a
workflow dir's sibling journal.jsonl can't register a bogus "journal" agent.
E2E verified against real ~/.claude/projects: 32 workflow-nested agents
discovered (wf_fa35c1d8-4a9), 0 bogus journal agents.
(2) Transcript timing — empirically the per-agent .jsonl IS written at the
standard subagents/ path and grows incrementally (tailable); the
/tmp/.../tasks/<id>.output the prior probe found is just a symlink back to
it. meta.json lands at spawn, the .jsonl a beat later. Add a meta→transcript
upgrade in registerAgentFile: when an agent registered meta-only gets its
sibling .jsonl, re-point filePath, drop the stale sidecar context, start
tailing, and emit subagent:updated (not a duplicate discovered). Corrects the
now-inaccurate "no transcript to tail" doc comment on registerAgentMeta.
Tests: 2 new cases (workflow-nested discovery; journal.jsonl not registered).
All 56 pass; tsc/lint/format clean.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Claude Code changed its subagent on-disk format (~2026-06-14): TUI Task
subagents now write `agent-{id}.meta.json` ({agentType,description,toolUseId})
into the session's `subagents/` dir and no longer reliably write a per-agent
`agent-{id}.jsonl` transcript there. The watcher discovered agents ONLY by
`.jsonl`, so it tracked zero — subagent windows and the monitor's "N TRACKED"
showed nothing.
- Add `registerAgentMeta()`: discover from the meta sidecar (description from
meta.description/agentType), prefer a sibling `.jsonl` transcript when present
(richer), never tail a meta file.
- Initial scan + directory watcher now handle `.meta.json` alongside `.jsonl`.
- Tests: 2 new cases (meta-only discovery; prefer-.jsonl-when-present).
Verified e2e against a real ~/.claude/projects fixture.
Known follow-ups (not in scope): meta-only agents have no per-agent transcript
to tail (no live tool-call feed, status stays 'active'); workflow agents under
`subagents/workflows/{wf}/agent-*.jsonl` are still missed by the flat scan.
Also adds the README screenshot tooling used to surface this:
- capture-real-overview.mjs: DSF=2 + ?nowebgl crisp path (DOM renderer avoids
the WebGL glyph-doubling at deviceScaleFactor>1).
- capture-readme-real.mjs: real-instance desktop-scene capture (dashboard/
monitor/subagent) for an isolated beta seeded from prod settings.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The File Browser preview and Attachments preview share openFilePreview(),
but the workspace branch (via /file-content) misclassified several types the
attachments viewer handled fine:
- SVG was reported as type:image, but file-raw serves SVG as octet-stream +
attachment (XSS hardening), so the <img> broke. Now fetched and rendered via
a same-origin image/svg+xml blob <img> (safe; <img> never runs SVG scripts).
file-raw's SVG hardening is unchanged.
- Audio (mp3/wav/ogg/m4a/aac/flac/opus) was type:binary -> "Cannot preview".
Now classified as audio and rendered with <audio controls>; file-raw gained
the matching audio/video MIME types so playback works.
- Binary formats not in the hardcoded list (xlsx/doc/zip/...) were decoded as
UTF-8 and dumped as mojibake. Replaced the static list with a NUL-byte
content sniff that flags arbitrary binaries; the binary fallback now offers a
Download link instead of dead-ending.
Adds route tests for audio, known-binary (xlsx), and NUL-sniff classification.
Verified end-to-end on an isolated instance + headless browser.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
scripts/capture-real-overview.mjs:
- Default deviceScaleFactor to 1 (DSF=2 makes xterm's headless WebGL renderer
draw console glyphs at ~2x while reporting nominal cell dims — invisible to
cols/cell measurement, only the pixels reveal it; HTML chrome is unaffected so
only the terminal font looks oversized)
- Mint a unique timestamped filename per run so a viewer/HTTP cache can't shadow
a fresh capture with a stale render of a fixed path
- Seed per-device localStorage (skin, codeman-font-size, codeman-app-settings)
so the capture reflects a real device: plan-usage chip shown (per-device key,
deleted from server payload), side panels closed for a full-width terminal
- Support prod's self-signed HTTPS (ignoreHTTPSErrors), env-configurable viewport
CLAUDE.md:
- Document the DSF=1 / unique-filename screenshot gotcha (incl. the real
Codeman-side immutable-static-asset cache footgun)
- Add the sanitize-html.js infra module (DOMPurify mXSS allowlist, COD-56) to the
frontend module list and load order (was missing)
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Review polish on the desktop tab auto-wrap:
- Auto-wrap is purely width-driven, but updateTabOverflowMode() was only called at the
tail of _renderSessionTabsImmediate (SSE content renders). Window resize — the primary
trigger for tabs crossing the one-row overflow threshold — never re-evaluated it, so
narrowing/widening the window left the wrap state stale until an unrelated status event
fired a render. Call it from the debounced window-resize handler (no-op on
mobile/tablet, where the method bails).
- Move the re-evaluation into _fullRenderSessionTabs() as well, so the incremental
branch's two early `_fullRenderSessionTabs(); return;` paths (badge add/remove, which
change tab width) and the manual two-rows toggle (applyTabWrapSettings → _fullRender…)
re-evaluate too. The latter also fixes a transient where enabling manual two-rows while
auto-wrap was on left both classes set (clipping folder tabs to 96px) until the next
render.
- Add boundary cases to the policy test: exact fit and the +1 sub-pixel tolerance (no
wrap), 2px over (wrap), and a single overflowing tab (no wrap).
Verified: tab-overflow test passes; tsc, check:frontend-syntax, check:public-assets,
prettier all clean.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Making the hook-event secret unconditionally required closes the own-loopback-proxy gap,
but it would also silently 401 the hook curls baked into cases created BEFORE the secret
header existed (COD-54, 2026-06-10): writeHooksConfig only runs at case CREATION, so an
existing/linked case on a password-protected install keeps secret-less curls that the new
gate rejects (degrading idle/stop/teammate/task signalling with no error surfaced).
No-password installs are unaffected — the gate isn't registered without CODEMAN_PASSWORD.
Add `refreshStaleHookSecret(casePath)` and call it on Claude-mode spawns in
POST /api/sessions and POST /api/quick-start (existing-case branch). It regenerates the
hooks block ONLY when settings.local.json already holds Codeman's own hook curls (they
target /api/hook-event) that lack the X-Codeman-Hook-Secret header — a no-op when the
hooks are absent, not ours, or already current, so it never clobbers user customizations
and is cheap on every spawn. Fresh cases are unaffected (writeHooksConfig already wrote
the secret). withSettingsLock serializes it with the model/statusLine writers.
Verified: new test/hook-secret-selfheal.test.ts 5/5 (heal + key-preservation + no-op on
current/foreign/absent/malformed); the PR's cod54 + auth-security suites still pass
(36); tsc, lint, format:check, and npm run build all clean (symbol present in dist).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The PR gates CJK textarea visibility on an active session
(`showCjk = cjkUserEnabled && !!activeSessionId`) so the fixed-position textarea no
longer floats over the welcome overlay. That intentionally changes the behavior the
existing `shows the CJK textarea on mobile only for server override` test asserted —
it set `_serverCjkOverride = true` on a fresh page (no active session) and expected the
textarea visible, which now (correctly) resolves to hidden. The test lives in
test/mobile/** (excluded from CI), so it wasn't caught by the PR's green CI.
Update the test to verify the new, intended behavior: with the server override on it
stays hidden on the welcome screen (no active session) and is revealed once a session
is active. This is a co-authored review fix; the original change is TeigenZhang's.
Verified: tsc, check:frontend-syntax, check:public-assets, prettier all clean.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The PR migrated the app.js tab-nav handler to physical e.code but left xterm's
pass-through gate (terminal-ui.js) matching ev.key digits. Consequences:
- Alt+[ / Alt+] (the new bindings) were never in the gate, so xterm sent ESC[ / ESC]
to the PTY on every platform AS WELL AS switching the session.
- Alt+digit on a remapped macOS Option layout (Option+1 -> "¡") didn't match the
ev.key '0'-'9' gate either, so xterm injected ESC<char> — on exactly the layouts
this PR exists to fix.
Update the xterm gate to mirror app.js exactly: suppress when
`ev.altKey && !ctrl && !shift && /^(Digit[1-9]|BracketLeft|BracketRight)$/.test(ev.code)`.
Returning false there tells xterm not to write to the PTY, so the shortcut switches
the tab with no stray escape sequence.
Also: relabel the docs Alt/Option (the mechanism is layout/OS-independent, so the
shortcut works for Linux/Windows Alt users too — "Option" alone was Mac-only wording),
and add a keyboard-shortcuts test asserting terminal-ui.js gates on the same physical
codes so this desync can't regress (a grep the original test missed).
Verified: keyboard-shortcuts test 4/4, check:frontend-syntax, check:public-assets,
format:check all clean.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Review fixes on top of the `codeman doctor` checker:
- Node minVersion 18.0.0 -> 22.0.0. package.json engines is ">=22.0.0" and the docs/CI
require Node 22+, so doctor was green-lighting Node 18-21 (a false pass).
- Remove the phantom `gemini` registry entry. Codeman has no Gemini backend
(SessionMode = 'claude' | 'shell' | 'opencode' | 'codex'); the entry advertised a
dependency that nothing uses.
- Add `pdftoppm` (poppler) to the office group. document-thumbnailer.ts calls pdftoppm
with no fallback as the sole PDF/Office first-page thumbnail renderer, yet it was
absent from the registry, so doctor never reported it missing.
- Fix the `--category` mismatch: the help advertised `documents|media` categories that
the ToolCategory type/registry never defined, and an unknown category silently
produced an empty "all healthy" table. Introduce TOOL_CATEGORIES as the single source
of truth (type + help + validation); an invalid `--category` now errors with the
valid list and exits 2.
Verified: tsc, lint, format:check all clean; both dependency tests pass (20);
`doctor` runs correctly (Node 22.22 ok, pdftoppm detected, no gemini), `--category media`
errors with exit 2, `--category office` lists libreoffice/pdftoppm/msoffice.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Review fixes on top of the DOMPurify mXSS hardening:
- Remove `USE_PROFILES: { html: true }` from the sanitize-html.js config. DOMPurify
treats USE_PROFILES and ALLOWED_TAGS/ALLOWED_ATTR as mutually exclusive — with a
profile set it resets the allow-lists to the full HTML profile and silently ignores
the curated lists, so the tight markdown-only allowlist was dead config (still
XSS-safe via FORBID + core, but far broader than intended: <button>/<input>/
<details>/<audio>/<select>/<label> all survived). Dropping USE_PROFILES puts the
curated ALLOWED_TAGS/ALLOWED_ATTR back in force; FORBID_TAGS/FORBID_ATTR stay as
defense-in-depth and DOMPurify keeps its default safe-URI handling.
- Rewrite test/markdown-sanitizer.test.ts to run in the default node environment with
an in-test jsdom window instead of a per-file jsdom environment. That environment
externalizes node:fs/node:path under vite, so the suite failed to load in isolation
("No such built-in module: node:") and only survived the full CI run because an
earlier node-env test happened to pre-cache node:fs — order-dependent and fragile.
The rewrite is order-robust and adds an "allowlist is actually enforced" block
(non-markdown tags must be dropped) that fails if USE_PROFILES is reintroduced.
Verified: 25/25 tests pass standalone under config/vitest.ci.config.ts; tsc, lint,
format:check, check:frontend-syntax, check:public-assets, and npm run build all clean.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Tab-switch shortcuts matched e.key, so on macOS Option+1 emits a special
character ('¡', not '1') and the shortcut silently failed. Switch to physical
e.code (Digit1-9), which is layout-independent. Also adds Option+[ / Option+]
for previous / next session. Help modal + README updated.
Test: test/keyboard-shortcuts.test.ts.
When desktop session tabs overflow one row, wrap them to a second row instead
of horizontal scroll — unless the user has pinned the manual two-row layout
(tabTwoRows). Mobile/tablet keep horizontal scroll. The wrap policy
(shouldAutoWrapTabs) lives in constants.js as a pure, unit-testable function;
updateTabOverflowMode() measures overflow after each tab render and toggles
.tabs-auto-wrap.
Test: test/tab-overflow.test.ts (vm-loads constants.js, asserts the policy).
Release 1.1.0. Headline: opt-in Plan Usage Limits chip (per-device live
5h/weekly plan %), attachment history drawer + opt-in Attachments button,
Opus 4.6 model options, and mobile header regression guards.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The COD-39 attachments button was hard-visible in the header — first on
mobile, then (after the mobile-only hide) still on desktop. Make it a
proper opt-in App Settings → Display toggle ("Attachments Button"),
default OFF everywhere, mirroring the Response Viewer button:
- index.html: button ships with the `btn-attachments-history--hidden`
marker; new settings checkbox #appSettingsShowAttachmentsButton.
- styles.css: base `display:inline-flex !important` + a more-specific
`--hidden` rule (same pattern as the response viewer).
- settings-ui.js: load/save/getDefaultSettings(false) + a live toggle in
applyHeaderVisibilitySettings. Per-device and NON-leaking — added to
displayKeys AND stripped from the server payload, so enabling it on
desktop never makes it appear on mobile (or any other device). No
server-side render step (purely client display, like the eye button).
- mobile.css: dropped the now-redundant phone-only hide — the opt-in
marker hides it everywhere by default; the per-device toggle governs
both desktop and phone.
Tests updated: the CI static guard drops btn-attachments-history from the
phone-hidden lock (it's opt-in now, excluded from the default-visible
enumeration — the guard still gates any NEW default-visible button); the
real-browser E2E now asserts default-hidden on a desktop-class viewport
and visible after enabling the setting.
Verified on a real desktop browser: hidden by default, the settings
toggle exists, enabling it shows the button. tsc + frontend-syntax +
prettier + public-asset checks + both test suites green.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Document the three PRs that grew attachments since the last update:
COD-37/#119 (registry + magic links) was already covered, but
COD-38/#120 (document previews/thumbnails) and COD-39/#121 (history
drawer) added four source files and several endpoints that weren't
documented. Split a dedicated Attachments row out of Infra, extend the
Attachments Key Pattern to cover the converter pipeline + concurrency
limiter + history drawer, and refresh the files-route handler count
(8 -> 14) and total (~140 -> ~146). Also carries the prior pending
app.js line-count (3.7K -> 3.9K) and config-file-count (10 -> 12) bumps.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The skin picker inherited .form-select's 0.8rem font + 0.5rem vertical
padding, rendering bigger and taller than the settings row it sits in
(0.75rem / 0.45rem). The daylight skins' Manrope font exaggerated it,
so "Daylight Blue" looked oversized and the field too thick. Scope a
0.75rem font + 0.3rem vertical padding to .settings-item-skin .form-select
so the field text matches the row label.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The COD-39 attachment-history header button was visible on the cramped
phone header. Hide it on phones alongside the settings gear and lifecycle
log (the mobile header is intentionally minimal — those controls live in
the toolbar). One-line addition to the existing @media (max-width: 430px)
display:none block in mobile.css.
This is the second time a header control leaked onto mobile (the
plan-usage chip was the first), so add two regression guards:
- test/mobile-header-buttons-policy.test.ts — a pure static analysis of
index.html + mobile.css (no browser), so it runs in the normal CI sweep
(the test/mobile/** Playwright suite is EXCLUDED from CI and never gated
this). It enumerates every default-visible header button and fails when
one has no phone-visibility decision — either a mobile.css hide rule or
an explicit MOBILE_VISIBLE_ALLOWLIST entry. A new header button now
forces that decision. Verified it fails on the pre-fix state and passes
after.
- test/mobile/header-buttons.test.ts — real-browser E2E in the mobile
suite: asserts the attachments/settings/lifecycle buttons are hidden on
an emulated iPhone 14 Pro and the attachments button is visible on a
desktop-class tablet.
tsc + lint + prettier + both new tests green. Only CSS + tests changed.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The plan-usage header chip (5h/7d %) was a SYNCED setting, so enabling
it on desktop turned it on for mobile too — even though the user never
enabled it there. Make the chip's DISPLAY purely per-device (default
OFF) like the response viewer / skin, while keeping telemetry COLLECTION
server-side.
Three leak sources fixed:
- server.ts renderIndexHtml force-revealed the chip from the synced
value (pre-paint), pushing the desktop choice onto every device.
Removed — the chip now ships hidden and the client reveals it
per-device via applyHeaderVisibilitySettings.
- settings-ui.js load-merge let the server value win, writing desktop's
`true` into the (separate) mobile settings blob. showPlanUsageLimits
is now a displayKey AND is dropped from the server payload on load, so
a stale server value is never seeded into a device that didn't enable
it. It's also stripped from the save payload so a mobile "off" can't
clobber the server.
- Collection was gated on the same synced flag. Decoupled via a new
`statusLineTelemetry` ACTION field (schema + system-routes): sent on
ENABLE only and never persisted, so the exporter is injected when a
device turns the chip on but is never yanked when another device has
it off (it's shared across sibling sessions). Session-create already
reads the per-device blob, so that path was already correct.
One-time migration clears a stale synced `true` from the mobile blob so
existing mobile installs default to OFF without a manual toggle.
Verified end-to-end on an isolated server: with showPlanUsageLimits=true
persisted, the rendered HTML ships the chip hidden; a fresh browser
context (mobile case) keeps it hidden while a context that explicitly
enabled it shows it; the PUT accepts statusLineTelemetry and does not
persist it. tsc + frontend-syntax + system-routes/index tests green.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Remove the dead mobile-collapsed header tray that hid the entire header-right cluster (incl. the opt-in response-viewer eye) on phones/tablets, and update the mobile test to assert inline reachability. Eye stays hidden by default (showResponseViewer).
Removing the dead `mobile-collapsed` tray (this PR) means the test that
asserted the headerRight tray *stays collapsed* on mobile now contradicts
the code and would fail when run. Flip it: with the three-dot utility
toggle gone, the header-right utilities must flow inline and stay
reachable on small viewports. The response-viewer eye itself remains
hidden by default (showResponseViewer opt-in), so this only re-exposes
the already-default-visible utilities inline.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
COD-54 gated the /api/hook-event + /api/status-telemetry localhost bypass
behind the shared X-Codeman-Hook-Secret only WHILE a managed tunnel was
running, keeping a plain localhost bypass otherwise. But Codeman can't detect
a user's OWN loopback reverse proxy (their own `cloudflared --url`,
`tailscale serve`, nginx -> 127.0.0.1), which proxies internet traffic into
the loopback origin with req.ip === 127.0.0.1 — so that setup kept the unsafe
plain bypass.
Require the secret on the loopback bypass unconditionally. Managed-session
hooks already always present it (X-Codeman-Hook-Secret from
$CODEMAN_HOOK_SECRET_FILE, generated for every instance), so the legitimate
hook channel is unaffected; only the previously-unguarded own-proxy path is
now rejected. Drops the now-unused getTunnelRunning param from
registerAuthMiddleware.
Tests: cod54-hook-event-auth (tunnel-down now also requires the secret, plus
a good-secret positive case); auth-security (hook tests present the secret to
reach schema validation).
The previous _sanitizeHtml was a denylist over agent/transcript markdown
rendered via innerHTML; it missed style attributes and the svg/math mXSS
namespaces — e.g. <svg><style><img src=x onerror=alert(1)></style></svg>
re-serialized into a live <img onerror>.
Vendor DOMPurify 3.4.8 (allowlist) following the existing marked.min.js
vendor pattern (same-origin, CSP script-src 'self'; not in package.json so
no lockfile drift). New sanitize-html.js wires a hardened allowlist config
(FORBID style/svg/math/script/iframe/object/embed/form; no data attrs);
app.js _sanitizeHtml delegates to it with a fail-closed escape-all fallback.
index.html loads dompurify -> sanitize-html -> app.js (defer); build.mjs
minifies + content-hashes sanitize-html.js.
Test: test/markdown-sanitizer.test.ts (jsdom, real shipping artifacts) —
mXSS payloads neutralized + legit markdown preserved.
Environment-aware dependency probe (linux|darwin|win32|wsl) with a static
registry, an injectable ProbeHost seam for testing, grouped table + `--json`
output, and a non-zero exit when a required dependency is missing/outdated.
Node and tmux are the only hard-required tools; the agent CLIs and document
converters (LibreOffice / MS Office via WSL interop) are optional. CI-safe
unit tests (no tmux, injected host).
Per-session attachment history with a slide-in drawer, unread badge, and
re-show. Rebased onto master (stacked on #120) + review hardening (malformed-
history recovery guard, resilient list route, badge positioning, debounce
cancel, stable re-show, Escape-to-close, CSS token fixes). See PR #121.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Follow-up fixes applied during review of PR #121 (all confirmed minor/nit;
no blockers). Security posture verified sound (externalPath never leaves
toState()/the list route; re-registration runs the guard).
- fix(recovery): restoreAttachmentHistory now skips malformed/legacy saved
items (null, non-object, missing source/fileName) instead of throwing inside
the Session constructor — a corrupt __attachmentHistory entry could otherwise
abort the entire mux-recovery loop. (P1)
- fix(routes): the attachment-list route degrades a single failing entry to
{missing:true} instead of failing the whole drawer. (INT-4)
- fix(ui): give the attachments header button a positioning context so the
unread badge anchors to the icon, not the header bar. (F1/CSS-1)
- fix(ui): cancel the debounced history refresh on drawer close and guard it
against a stale session/closed drawer. (F3)
- fix(ui): re-show ("Card") of a detected item now uses the item's own
timestamp so the cardId is stable — focuses the existing card instead of
stacking duplicates. (F4)
- fix(ui): Escape now closes the drawer, matching every other panel. (UX-1)
- fix(ui): badge shows "99+" past 99 (was an inconsistent 100/99 cap). (BADGE-1)
- style: drop the duplicate @keyframes notif-badge-pulse (dead CSS). (INT-1/CSS-3)
- style: empty-state used three undefined CSS custom properties
(--text-primary/--border-color/--bg-tertiary) → use the defined
--text/--border-light/--bg-input tokens. (CSS-2)
- test: add constructor restore round-trip + malformed-item resilience tests.
Deferred (noted for author): broadcasting the full 100-item history in every
session-state SSE event (payload bloat), "unread" badge semantics, making the
header button opt-in, and app.inject route tests for the two new endpoints.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Stacks on COD-38: accumulates a per-session attachment history and exposes it
through a slide-in drawer with an unread badge, so attachments stay reachable
after their cards are dismissed.
Backend:
- session-attachment-history: history state — dedupe by source path / relative
path, newest-first, 100-item cap, and externalPath sanitization (the absolute
host path is server-private and never leaves toState()).
- session.ts: _attachmentHistory + getter (sanitized) / upsert / restore /
getAttachmentHistoryForPersist; restored from saved state in the constructor.
- file-routes: GET /attachments (list — resolves each entry to live metadata +
routes; external entries are re-registered) and GET /attachments/:id
(metadata poll). The by-id route guards via the registry's TOCTOU-safe
resolveServableAttachmentPath.
- server.ts: detected/registered attachments upsert into history and persist;
the private (externalPath-bearing) history rides on disk under
__attachmentHistory, separate from the sanitized public copy, and is restored
on mux-session recovery.
- types/session.ts: SessionAttachmentHistoryItem + SessionState.attachmentHistory.
Frontend:
- panels-ui: the drawer (lazy-built), unread badge, list render with per-item
preview/download/open/"Card" (reshow) actions, and live refresh of the open
drawer on new detections.
- app.js: history state + per-session badge/cleanup wiring.
- index.html / styles.css / mobile.css: header button + badge and the drawer.
Verified: tsc / eslint / prettier / frontend-syntax / public-assets clean; new
history-module unit tests pass; full test:ci green (2866 passed); badge, drawer
open/render/reshow/close verified in-browser.
Follow-up hardening applied during review of PR #120, addressing the
adversarial multi-agent findings:
- fix(preview): render auto-detected (workspace, unregistered) DOCX/PPTX via
the file-preview route and PDFs via file-raw in openFilePreview. Previously
the Preview button fell through to file-content, dumping the binary Office/PDF
bytes as mojibake, and the new file-preview route was unreachable dead code.
(MAJOR: file-preview-route-unreachable-detected-office)
- perf(convert): add a global converter-concurrency limiter
(document-conversion-limiter.ts) wrapping every pdftoppm / soffice /
powershell spawn, so N simultaneous preview/thumbnail requests can no longer
fork unbounded converter processes. Default cap 3, CODEMAN_MAX_DOCUMENT_CONVERSIONS.
(MAJOR: no-converter-concurrency-limit)
- fix(cache): bound the converted-PDF disk cache with LRU-by-mtime eviction
(pruneDocumentPreviewCache, default 100 files, CODEMAN_MAX_PREVIEW_CACHE_FILES),
run after each successful conversion. Was unbounded.
(MAJOR/MINOR: preview-cache-unbounded-disk-growth)
Tests: document-conversion-limiter.test.ts, document-preview-cache-eviction.test.ts,
and route coverage for the four new endpoints in
routes/file-routes-preview-thumbnail.test.ts (closes the missing-route-test gap).
Verified end-to-end against real pdftoppm (thumbnail render + concurrency cap).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Review of the plan-usage chip feature (commits since 1.0.0) surfaced several
issues; this fixes all confirmed findings:
- HIGH: applyStatusLineConfig clobbered a user's hand-authored statusLine on
the enable path (the isOurs guard only protected disable). Now bails out when
an existing statusLine isn't ours, on both the enable and disable paths.
- MED: StatusTelemetrySchema used z.optional() (rejects null) on Claude's
undocumented statusline fields — a single stray null 400'd the entire POST and
silently killed the chip's data feed. Switched the modeled fields to .nullish().
- MED: dropping the Token Count / Show Cost header toggles left their features
reading settings.showTokenCount/showCost, but saveAppSettings rebuilds settings
fresh from the DOM, dropping those keys and resetting them to defaults on every
save (re-enabling the token chip with no UI to turn it off). Preserve the prior
stored preference.
- telemetrySignature keyed on contextUsedPercentage (never displayed) and the raw
unrounded %, churning a redundant SSE broadcast + localStorage write + identical
chip re-render on every assistant message. Now keys on the rounded displayed
window values only.
- Plan-usage chip flashed hidden on load (no server-side reveal): renderIndexHtml
now strips header-plan-usage--hidden when enabled, matching btn-multimonitor;
fixes the FOUC and makes the "server renders initial state" comments accurate.
- Serialize all settings.local.json read-modify-write writers in hooks-config via
a shared per-path mutex (previously lock-free; concurrent session-create +
settings-toggle on the same repo could lose writes).
- Hardened the chip's innerHTML against any future string field; removed the dead
_latestPlanUsage field; clamped ctx% in the footer formatter; corrected the
session-create comment (the path is add-only by design — a per-repo settings
file is shared by sibling sessions).
- Tests: new test/routes/status-telemetry-routes.test.ts (route behavior, dedup,
null-tolerance) + NaN/Infinity/fractional and signature-churn unit tests; made
server-index-title.test.ts deterministic against the ambient settings.json.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The header Token Count and Show Cost ($) display options are superseded by the
Plan Usage Limits chip, so remove both toggles from App Settings → Header
Displays along with their read (populate) and write (save payload) wiring in
settings-ui.js. Relocate the Plan Usage Limits toggle to the top of the section
for easier access.
Header token-chip render logic is left intact (toggles-only change): the chip
keeps its existing default behavior, it's just no longer user-toggleable.
Verified e2e against an isolated instance with Playwright: section now leads
with Plan Usage Limits; Token Count/Show Cost elements are gone; openAppSettings
(populate) and saveAppSettings (payload build) run with no console errors.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The header chip previously only repopulated on reload from per-browser
localStorage, so a fresh browser (or cleared storage) stayed blank until a
session next rendered telemetry. Store the latest broadcast telemetry
process-wide (plan-usage-latest.ts) and include it as `planUsage` in
getLightState — the per-connection SSE init snapshot — so handleInit paints
the chip immediately on every fresh load / reconnect, authoritative over the
localStorage restore. Null until the first telemetry of the process.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Two changes so the feature works for any user the moment they enable it,
without manual steps or per-client state:
- Reconcile on settings change: PUT /api/settings now applies the statusLine
exporter across all ACTIVE Claude sessions' working dirs when
showPlanUsageLimits is toggled (inject on enable, remove on disable). This is
server-side and authoritative, so existing sessions get the footer + feed the
chip immediately — no need to create a new session, no dependency on a
browser's synced localStorage.
- Create is now ADD-ONLY: never remove the statusLine on session create.
Sessions in a repo share one settings.local.json, so a single create-with-false
(e.g. a client whose synced setting hadn't loaded) was yanking the statusLine
out from under all other live sessions in that repo, killing their footer and
the chip's data feed. Removal now happens only via the explicit settings toggle.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
End-to-end testing on the real install surfaced several issues the unit
tests missed:
- Injection gate excluded real sessions: gated on workingDir under CASES_DIR,
but sessions run in linked cases / real repos. Drop the gate (match
updateCaseModel, which writes settings.local.json unconditionally).
- statusLine curl failed on HTTPS: prod is loopback HTTPS with a self-signed
cert; `curl -s` returns 000. Use `curl -sk` (loopback only). applyStatusLineConfig
now also updates an out-of-date ours-command so the fix propagates.
- Footer hijacked by limits: the in-terminal statusline now shows CURRENT
SESSION status — `Opus 4.8 (1M context) in:562,411 out:1,188 ctx:56%` —
while the account-wide plan limits live only in the header chip.
- Chip blank after reload: persist last-known to localStorage and restore on
load (account-global, slow-moving; 12h freshness guard).
- Readability + color: per-window green/yellow/red by usage (<60 / 60–84 / ≥85),
bolder labels and values.
- Drop the renderIndexHtml strip (client-side reveal only, response-viewer
pattern) — fixes server-index-title test fragility to local settings.
Footer fields flow through context_window.total_input_tokens/total_output_tokens
(schema + parser). Tests updated; verified live (footer, chip, colors, reload
persistence) on the real install.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Surface Claude subscription plan usage limits (5-hour rolling + 7-day
weekly: percent used + reset time) in the header, opt-in via App Settings
→ Display → "Plan Usage Limits" (default OFF, no behavior change when off).
A Codeman-managed Claude statusLine exporter forwards the rate_limits JSON
to a new auth-exempt POST /api/status-telemetry (same loopback + hook-secret
gate as /api/hook-event); parsed telemetry broadcasts over SSE
session:statusTelemetry to a header chip (amber >=80%, red >=95%, reset
times on hover). The exporter prints the same summary back as the
in-terminal footer (print-through).
- src/usage-telemetry.ts: pure parser/formatter (epoch-sec -> ms, clamp,
change signature) + test/usage-telemetry.test.ts
- hooks-config.ts: generateStatusLineCommand + applyStatusLineConfig
(add/remove; never clobbers a user's own statusLine)
- session-routes.ts: inject gate (Claude-only, Codeman-managed cases),
driven by create-payload statusLineTelemetry (session-ui.js)
- schemas.ts: StatusTelemetrySchema + showPlanUsageLimits + payload field
- frontend: header chip, applyHeaderVisibilitySettings toggle,
renderIndexHtml strip, _onSessionStatusTelemetry handler
Schema empirically confirmed against Claude Code 2.1.177 (Claude Max):
only five_hour/seven_day windows exist (no Opus-weekly field); rate_limits
is absent before the first API response and for non-subscriber auth. Design
+ verification method in docs/usage-limits-display-plan.md.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Add a per-device skin switcher in App Settings → Display:
- Three skins via html[data-skin]: og (original Codeman look),
daylight-green, and daylight-blue (new default). Per-skin CSS-variable
token blocks; the v1.0 "Carbon Aurora" component polish is scoped to
non-og skins and parameterized so green/blue differ only by token values.
- Self-hosted Manrope (UI) + JetBrains Mono (terminal) variable fonts,
served from /fonts (no external CDN, CSP-safe via font-src 'self').
- Per-skin xterm terminal theme with live re-theming of open terminals on
skin change; skin-aware --term-bg so the terminal background fills cleanly
(fixes the variable-height gap above the toolbar).
- Pre-paint inline script applies the saved skin before first paint (no
flash); persisted per-device in localStorage + the settings blob, and
kept out of the server settings payload (device-local).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
- Guard `_updateCjkInputState()` with `activeSessionId` check so the
`position: fixed` CJK textarea doesn't float over the welcome overlay
- Call `_updateCjkInputState()` in `showWelcome()`/`hideWelcome()` to
sync CJK visibility on session enter/leave
- Add `padding: 12px 10px` to `.cjk-input-visible textarea` for proper
vertical centering of input text
The header-right tray (02fa3f3) was reworked into a position:fixed
collapsible panel with a hamburger toggle, but the toggle button, its
JS, and CSS were later reverted on master while the container kept a
static `mobile-collapsed` class. With no expand mechanism left, the
header-right stayed display:none on mobile, so the response-viewer eye
icon was unreachable even with "Response Viewer" enabled — desktop was
fine because the media-query rule doesn't apply there.
Restore the simple inline always-visible header-right layout (dev's
known-good state). The showResponseViewer setting still controls the
eye's --hidden marker class.
Verified on iPhone viewport: eye visible (26x26) with setting on, hidden
with setting off, tap opens the viewer; desktop eye unaffected.
Builds on the COD-37 registry: surfaces detected/registered attachments as
dismissible cards with a first-page thumbnail and an inline preview — the
consumer the registry PR deliberately deferred.
Backend:
- document-thumbnailer: first-page PNG thumbnails (PNG passthrough; PDF via
pdftoppm; Office via the preview cache).
- document-preview-cache: disk-cached DOCX/PPTX -> PDF conversion (LibreOffice
/ PowerShell COM), in-flight dedup, multi-converter fallback.
- file-routes: serveConvertedPreview / serveThumbnail + four routes —
GET .../attachments/:id/preview, .../thumbnail and the workspace-path
file-preview / file-thumbnail. Reuses the registry's TOCTOU-safe
resolveServableAttachmentPath, so previews stream the freshly-resolved path.
- server: enrich detected attachment events with a thumbnail route.
- image-watcher: .png now routes to attachment:detected — this PR adds the card
consumer, so the screenshot popup is no longer its only handler.
Frontend:
- panels-ui: attachment cards (addAttachmentCard, lazy stack, Clear-all,
per-session cleanup) plus a 3-arg openFilePreview that renders registered
attachments inline (image/PDF) or via the server-converted PDF (docx/pptx).
- app.js: wire attachment:detected -> _onAttachmentDetected and card state.
- styles: attachment-card + stack styling.
Verified: tsc / eslint / prettier / frontend-syntax clean; new thumbnailer +
preview-cache unit tests pass; full test:ci green (2861 passed); card render +
preview overlay + dismiss verified in-browser.
Add server-side attachment pipeline (registry, magic-link, path guard)
Review fixes (2767e80): force-confine the terminal magic-link scan path to the
session workspace (closes a prompt-injectable arbitrary host-file read primitive
that broadcast over SSE); keep PNG on the image-popup path (the attachment UI
consumer is out of scope, so rerouting it broke the screenshot popup); serve the
re-resolved path (TOCTOU); 50MB raw cap; per-session registry cap; CLI .env via
dataPath(). Documented in security-architecture.md.
Codeman maintainer