A prompt posted to /api/sessions/:id/input without `useMux` was written
into the pane in one piece. Claude Code (measured on 2.1.283) takes a
`<text>\r` burst of about a hundred characters or more as a paste, so the
trailing `\r` landed as a newline in the composer and the prompt sat there
unsent while the route answered 200. A later raw `\r` did not recover it;
a tmux `send-keys Enter` did. Short prompts submitted, which is why it
looked random. The same stranding was seen with Codex and OpenCode.
A plain prompt (printable text plus exactly one trailing `\r`, detected by
`isPlainPromptInput()`) now goes through `writeViaMux` even without
`useMux`: the text is typed, Enter is pressed as its own key, and the
SubmitVerifier re-presses it while the prompt is still on the composer.
The write is awaited, since the browser's POST fallback sends frames one
at a time and a following keystroke must not overtake the Enter. Raw
frames (escape sequences, bracketed paste, a line feed, a bare `\r`) and
an explicit `useMux: false` keep the direct write.
Verified on an isolated instance: the 239- and 104-character prompts that
stranded (at +1 s, at +50 s on ultracode, and on a warm session) all
submitted on the first Enter with no `useMux`. The phone's local-echo
flow (a burst, then its `\r` as a separate write) was measured unaffected.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Folds the #490 and #492 contributor changesets (the latter said minor) into one patch changeset with the Thanks section, one paragraph per change and the fixes applied while landing.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- _logScrollRouting() reports cliMouseTracking, the gate's new input, in both
the de-dup signature and the console line (xterm's own mouseTracking stays
'none' for Claude, so it gave no reason for a no).
- Restore two guard tests the new gate made vacuous: the local-scrollback
opt-out footgun test and the codex/gemini "no version rescues it" fixtures
now set cliMouseTracking: true, so removing the opt-out or re-adding codex to
the gate fails again.
- Update the comments and architecture-invariants lines that still described
the version-only rule (wheel handler header, gate doc, the false paths of
_maybePageCliTranscript, "holds a tracking mode on continuously").
- Name both fullscreen switches (CLAUDE_CODE_NO_FLICKER=1 and "tui":
"fullscreen" in ~/.claude/settings.json) in the code comment, the invariants
and the two wiki pages.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- Skip and latch a bounded Shell window once the browser is at xterm's
scrollback cap (scrollback + rows): a 1 MiB window of short lines can carry
more rows than the browser can ever hold, so it replayed and re-captured on
every scroll-to-top with no 60 s back-off.
- Label a replayed bounded window 'tail' even when the capture was byte-capped,
so the banner keeps offering Load full history instead of calling the rest
unrecoverable.
- Pin GET /terminal?full=1&tail=<n> in the route tests: full-history source,
truncationReason 'tail', and the closing relative cursor move survive the cut.
- Log the bounded skip via _logScrollRouting('repull-skipped-bounded').
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- pre-push hook: skip with a notice when npm is not on PATH (GUI git
clients and IDEs often run hooks with a minimal PATH), instead of
blocking every push on "npm: not found"; real-push test with a
stripped PATH
- test/git-hooks.test.ts: pin GIT_CONFIG_NOSYSTEM=1 and
GIT_CONFIG_GLOBAL=/dev/null around the resolveGitHooksDir tests, so
an exported global or a system core.hooksPath no longer fails them
- watch tsconfig.json, .prettierignore and .editorconfig too:
typecheck and format:check read them
- check:browser-excludes: fail loudly when the vitest list output and
the walked test/**/*.test.ts tree share no path (format drift would
otherwise pass vacuously)
- Reword the PRE_PUSH_MARKER comment: bumping its version would make every
installed v1 hook read as foreign and never refresh again.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- claude's declared-for-later wheelForward says the live rule in
_shouldForwardWheelToApp is the version AND the server-published
cliMouseTracking flag, so whoever wires the field up needs both
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- claude watchingLine: the lookahead keys on "Artifact" alone, so a
footer truncated mid-chip ("1 Artifact…", "1 Artifact comm…") is still
refused instead of reporting the shell beside it; comment follows
- test: both truncations return no watching label
- invariants: a chip that waits on a human never counts as watching, and
the ^ anchor is what stops the retry past the chip
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- test: the complete-identity case now checks the combined
agentImageBuildArgPairs() argv on both producers, so the manual
build-agent-image.mjs path cannot drop the identity unnoticed
- both producers: GIT_IDENTITY_BUILD_ARGS carries the mirror/parity
warning its gh/az neighbour has
- the partial-identity error names CODEMAN_AGENT_IMAGE_GIT_USER_NAME and
CODEMAN_AGENT_IMAGE_GIT_USER_EMAIL; test regex follows
- wiki Docker-Cases: mention the identity variables next to the gh/az
switches
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- test: every ENV PATH= line in server.Dockerfile must start $PATH:, and
the ~/.local/bin append is pinned alongside /opt/codeman-cli/bin
- invariants + CLAUDE.md: the append-only PATH rule names ~/.local/bin too
- docker-compose.md: Settings-installed CLIs live in ~/.local on the
app-data mount; reinstall once after upgrading; hand-run npm installs
need --prefix ~/.local
- installEnv() JSDoc describes the in-container npm prefix redirect
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
When Claude hands work to an ultracode workflow or background agents, it
ends its own turn and closes it with `✻ Waiting for 1 dynamic workflow to
finish` instead of `✻ Brewed for 1m 18s`, then resumes by itself when the
workers report back. The pane sits quiet with the composer up, so the idle
probe called the session idle for the whole wait. At phone width the
workflow's progress row also drops its ticking timer, so nothing on screen
changes for minutes.
A new optional registry field, `capabilities.workDetect.awaitingLine`,
names that closing row, and `_probePaneWorking()` counts it as work.
Claude renders the row once from a snapshot and never redraws it, so the
same words stay on screen after the workers finish. `isAwaitingWorkers()`
therefore tests only the newest column-0 row directly above the composer,
never the whole pane and never the PTY stream; a follow-up turn always
puts rows of its own there. The column-0 anchor also keeps an agent from
holding its own tab busy by printing the sentence.
Verified against the live Mac mini pane that reported the bug (2.1.283),
and end to end on an isolated instance: an ultracode session running a
90 s workflow at 46 columns stayed busy through the wait and the
follow-up turn, then went idle 6 s after that turn closed.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
On a phone every inactive tab rendered transparent: grey 11px text
floating in unmarked gaps, a boxed Alt+N digit in each tab (a phone has
no Alt key), names capped at 50px so a shared `w1-` prefix was most of
what showed, and the tab that did not fit was chopped mid-word against
the connection dot. The strip looked like a row of disabled labels.
Phone block of mobile.css only:
- Every header tab is a chip, filled and bordered from the skin's
--control-* tokens, name in --text at weight 500. Written
`:where(.header) .session-tab` so it stays at (0,1,0): the per-colour
left border still wins, and sidebar layout (where the list leaves the
header) is untouched.
- The Alt+N digit is hidden in the header; inactive tabs drop their
empty .tab-actions container, which padded the chip's right side.
- Name cap 50px -> 80px, status dot 4px -> 6px, strip gap 2px -> 6px.
- Scroll-driven edge fade: a mask on the strip whose widths follow its
own inline scroll timeline (registered @property lengths), so the
clipped tab dissolves into the edge. No JS; a strip that does not
overflow gets no mask, and browsers without scroll timelines keep the
old hard edge.
The tap-zone arithmetic comment is updated for the numberless phone
tabs and the bigger dot (the required reserve drops from 38px to 36px;
the 44px min-width stays). test/mobile-tab-strip-chips.test.ts pins the
(0,1,0) selector, the top-level @property registration and the
timeline-after-shorthand order, each of which fails silently otherwise.
test/mobile/tabs.test.ts follows the new name cap.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
webview:changed carried only {action, id} and the SSE routing hint had no
webview: branch, so every connected client received it: in multi-user mode
any user saw the ids of other users' web-tab creates, edits and deletes.
The event now carries the web tab's owner (from the stored record) and is
routed to that owner plus admins. Single-user delivery is unchanged.
resolveGitHooksDir now returns a directory only when it is the repo's own
<git-common-dir>/hooks (compared on canonical paths), so a core.hooksPath
elsewhere, global or repo-local, is never written to by postinstall, while a
core.hooksPath pointing back at the repo's own .git/hooks still resolves.
The pre-push hook skips with a one-line notice when a pushed ref is not the
checked-out HEAD (tags peeled) or when git status shows uncommitted or
untracked changes under a path the checks read (src, config, scripts, test,
package.json, package-lock.json, install.sh), since the checks read the
working tree rather than the pushed commit.
Also: honest timing (~10-40s instead of ~15s), CLAUDE.md Session Safety note
on CODEMAN_SKIP_PREPUSH for another session's WIP, 14 (not 9) Playwright
tests, and a note that the browser-excludes check only sees direct imports.
npm run check:browser-excludes finds tests that import a browser driver and
asks `vitest list` whether the CI config still collects them; wired into CI.
npm install now also installs a marker-owned pre-push hook that runs the
static CI checks (~15s). Skip with CODEMAN_SKIP_PREPUSH=1; hand-written
hooks are left alone.
Claude 2.1.280 renders inline by default: no alt screen, no mouse tracking, transcript in real scrollback. The version-only gate still sent every wheel tick and touch swipe as SGR reports, which Claude ignores, so scrolling a Claude session was dead while codex (routed locally) worked. Gate forwarding on the server-recorded cliMouseTracking flag, which fullscreen mode (CLAUDE_CODE_NO_FLICKER=1) sets.
Adds a centered star call-to-action under the badge row in both the
English and Simplified Chinese READMEs.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A window cut at the tail size can be smaller than the browser's buffer
while tmux still holds more. The downgrade guard reads that as "tmux has
nothing more to give", which is true of an unbounded capture only, so a
bounded window reaching it marked the session exhausted and removed Load
full history from the banner.
The bounded skip now runs first, so such a window never reaches the
exhausted path, and it no longer writes banner state: relabelling it from
the bounded payload would call a terminal holding all of a Load full
history pull "the most recent 1 MiB".
A skipped window that came back truncated cannot reach anything older
than the browser shows, and every ask costs the server a synchronous
capture-pane of the whole history (tail is applied after the capture), so
it puts the session on the 60 s cooldown. An untruncated one keeps 4 s.
_replayWouldShrinkBuffer takes optional pre-estimated rows so a megabyte
capture is not scanned twice. CLAUDE.md's Full-scrollback replay entry no
longer says Shell never pulls on ordinary scroll.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
A burst of output leaves a Shell pane with about one screen of browser
scrollback, because tmux repaints the burst instead of scrolling it,
while tmux itself keeps every line. Shell declined the scroll-to-top
re-pull other modes use, and the Load full history button renders only
once a replay was truncated, so a Shell tab under 1 MiB could not
scroll back at all.
The scroll gesture now pulls ?full=1&tail=TERMINAL_TAIL_SIZE, the same
bound a tab switch loads; the route's existing tail cut marks longer
histories 'tail', so the banner still offers the unbounded pull. A
window no longer than the browser's buffer is not rewritten.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
An agent that publishes an artifact arms a monitor for its comments and
ends its turn. Claude Code shows that on the footer as `1 Artifact
comment monitor`, and #473 put that chip on the list of background work,
so the session counted as watching and its idle prompt opened already
acknowledged. Unlike every other chip on the list, that monitor waits
on the user: the agent hears nothing until somebody comments.
Claude's `watchingLine` now refuses any footer that carries the chip,
through a lookahead over the whole row, so a shell running beside the
monitor cannot report the session as watching either.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The image sets NPM_CONFIG_PREFIX=/opt/codeman-cli, which is image content, so
Update-Codeman.sh discarded every npm-installed CLI (dsh, pi). In the Compose
container, POST /api/clis/:id/install now installs into ~/.local on the
persistent home mount, and ~/.local/bin is appended to the image PATH.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GuHtuPiHXdykq9T6rKQJ9n
The phone case picker had no way to narrow a long case list, so finding
one meant scrolling a sheet that showed about six rows at a time.
- A search field filters rows by name (every typed word must match, any
order, case-insensitive), with a "No matching cases" state. Enter picks
the case when exactly one row is left; Escape clears, then closes.
- The field is not auto-focused, so opening the picker does not raise the
keyboard. The list holds its unfiltered height while searching so the
sheet does not jump, and the input is 16px so iOS Safari does not zoom.
- Layout: the sheet padded the home-indicator inset on top of the footer
already doing so, leaving a dead band under Create New Case; the sheet
now grows to 80dvh and the list fills it instead of a separate 50vh cap.
- Opening scrolls the list (its own box, not scrollIntoView) to the
currently selected case.
Co-authored-by: Codeman maintainer <noreply@anthropic.com>
The Run bar's case picker only loaded /api/cases at page load, so folders
deleted or created on disk stayed listed until a reload. It now refetches
on open and every 5 seconds while open, repainting only when the list
changed and falling back to another case if the selected one was removed.
The Manage tab of Add Case gains a search box filtering by name or path.
Reorder arrows are disabled while a filter is active so a swap cannot
involve a hidden case.
Claude-Session: https://claude.ai/code/session_01GuHtuPiHXdykq9T6rKQJ9n
Co-authored-by: Claude Sonnet 5 <noreply@anthropic.com>
* fix(cleanup): keep .claude-images while a sibling session uses the same dir
cleanupSession() recursively removes {workingDir}/.claude-images. That
directory belongs to the working directory rather than to the session, and
several sessions routinely share one case directory, so closing one session
deleted the pasted images a live sibling still referred to.
The removal now runs only when no other live session has the same working
directory. A session that is itself being cleaned up does not count as live,
so two sessions of one case closed together still remove the dir.
Split out ahead of the exited-agent sweep for Ark0N/Codeman#446, which closes
sessions unattended and would otherwise make the loss routine.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* feat(session): close sessions whose agent exited cleanly (#446)
Part 2 of Ark0N/Codeman#446. Part 1 records an exited agent as
SessionState.paneExit. A session whose agent the user ended with /exit is
now closed through cleanupSession(), the same path the X button takes, so
finished sessions stop piling up on the board. The lifecycle log records
the reason as "agent exited cleanly (status 0)", and the conversation stays
resumable from the Resume list.
shouldCloseCleanlyExitedSession() in the new pure module pane-exit-sweep.ts
holds the rule. It closes a session only when all of these hold:
- The exit status is an explicit numeric 0 with no signal. An absent status
is how a SIGKILL presents on tmux 3.2a, so it counts as unknown and the
row stays. A non-zero status or any signal also keeps the row, with the
exit code on the tab.
- Two authoritative pane reads agreed on that exit.
TmuxManager.getPaneExitReadCount() counts them, and a failed, empty or
skipped read neither confirms nor resets the count.
- No start, attach or relaunch is running for the pane.
Session.paneLifecycleInFlight covers _setupOrAttachMuxSession(), whose
dead-pane branch revives an exited pane on purpose, and restartCli().
setPaneExit() already scopes paneExit to local mux-backed sessions, so
remote, docker and direct-PTY sessions are never closed.
planRebootRestore() now refuses a record whose persisted paneExit is a
clean exit. That covers an agent that exited just before a reboot, before
the sweep reached it. A crashed agent's record stays eligible, like its row.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* fix(web): show "exited" on the phone overview and desktop home rail (#446)
Part 1 of Ark0N/Codeman#446 taught the tab strip and the rich rail rows
to say that a session's agent has exited. The phone overview and the
desktop home rail still said "idle", beside a green or pulsing dot.
_mobileOverviewExit() in mobile-overview.js is now the one rule for all
three surfaces, and _sidebarRichRow() uses it as well. It changes what a
row shows and leaves the row's state alone, because the state still picks
the section and the sort order. An exited row gets an "exited" pill, a
neutral dot and row accent, and a duration measured from when the server
first saw the pane dead. A pending permission prompt or question still
wins, as it does on the tab.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* fix(cleanup): close the gaps review found in the #446 sweep and image guard
Four fixes from a dual review of Ark0N/Codeman#446 part 2.
- The .claude-images guard compares canonical paths, so a sibling that
reaches the same directory through a symlink keeps it. Its comment used to
say that case only missed a deletion; it caused one.
- A detached session counts as a live sibling. DELETE ?killMux=false removes
it from the server's map while its pane keeps running, so the guard now
reads persisted records too, and exempts only sessions being killed rather
than every session in cleaningUp.
- A session being closed refuses startInteractive() and startShell(). The
/interactive route awaits listener setup before the start, and a start
that raced the close could launch a CLI in a tmux session whose record was
then deleted. A failed close clears the mark again.
- The clean-exit sweep tries each exit once, keyed by session id and the
exit's at stamp, so a close that fails is not retried and logged every
two seconds.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* fix(session): keep a clean exit that lands within 10 s of a pane start (#446)
A CLI that prints a startup error ("not logged in", a bad profile, a config
error) and exits 0 used to lose its tab, and the error with it, about 4 s
after launch. The sweep now keeps any clean exit that lands within
CLEAN_EXIT_MIN_PANE_LIFETIME_MS (10 s) of the last start, attach or relaunch
finishing (Session.paneStartedAt, stamped when _withPaneLifecycle ends). The
row stays as "exited (0)" for the user to read and close.
Verified on an isolated instance: a shell that ran `exit 0` 2 s after start
kept its row, one that exited after 13 s was closed.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A single input over MAX_INPUT_LENGTH (64 KiB) was queued for reliable
delivery, refused by both transports (the WebSocket silently, POST with a
400), and never dropped: the client treated the 400 as transient, so the
frame was re-sent every 2 s forever, blocked every later input for that
session, and came back from localStorage on every reload.
- Client: a paste over the frame limit is split into in-limit frames
(never cutting a surrogate pair) delivered in seq order; over 1 MiB, or
an oversized mux write, it is refused with a toast and never queued.
- Client: the POST drain drops a frame answered 400/413; a WS error ACK
drops it too; frames over the limit persisted by an older build are
pruned on load.
- Server: the WebSocket answers an oversized sequenced frame with
{t:'ia',seq,err:'too_large',max} instead of silence (an older client
reads that as a plain ACK and drops it); the POST schema uses
MAX_INPUT_LENGTH instead of a second 100000 limit.
Verified end to end on an isolated instance: a 110 KB paste reached the
PTY byte-identical over both the WebSocket and the POST path, a poisoned
120 KB persisted frame was pruned on load, and a 2 MB paste showed the
refusal toast with nothing queued.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
`dsh plugin` spawns a literal `pnpm` with no npm fallback, so the Run
menu's "DeepSeek - add a terminal profile" button failed with
`dsh: pnpm not found on PATH` (exit 127) on the server image. The agent
image already installs pnpm for the same reason (#352). Pin pnpm@12.6.0
in the runtime-writable CLI prefix and note it in the DeepSeek doc.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GuHtuPiHXdykq9T6rKQJ9n
Adds claude-opus-5-5 to the App Settings model picker (base option with
data-ctx="1" plus its [1m] companion row, since Opus 5.5 has a 1M window)
and to the five task-routing selects, mirroring how Fable 5.1 was added.
Co-authored-by: Claude <noreply@anthropic.com>
* fix(sessions): stop pinning the w1-myapp placeholder as Claude's /resume title
Local claude spawns passed the tab name as `--name`. That flag is not only the
cross-session peer name: it is also the prompt-box label, the `/resume` picker
entry and the terminal title, and a pinned title stops Claude generating its own
(`customTitle ?? aiTitle`). So every conversation of a case was listed in
`/resume` as the same `w1-myapp`, and none of them got a generated title. On one
workspace, 34 of 34 conversations spawned with `--name` had no ai-title, while
every conversation spawned without it had one.
Only a name the user chose is pinned now: `Session.cliPinnedName` is the name
when `nameSource === 'manual'`, carried to the builders as a separate `cliName`
so the tab/mux name is untouched. Placeholder and auto names let Claude title
the conversation again.
A rename in Codeman also reaches `/resume`: the new name is appended to the
conversation's transcript as the `custom-title` row `/rename` writes (never
creating the file, never writing an empty title). For a pane spawned without
`--name` this holds immediately; a pane spawned with one re-appends its own
title each turn, so there the new name holds from the next spawn.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* fix(sessions): skip no-op renames and docker sessions when syncing the /resume title
A same-name PUT (the Session Options field saves on blur and recomposes the
unchanged placeholder) no longer flips nameSource to manual or appends a
custom-title row, and docker sessions skip the host transcript scan since their
transcript lives in the container. The skill pages no longer use a w<N>- name
as the peer-name example, and the changeset notes the re-append caveat.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* docs: record that nameSource decides --name and renames reach /resume
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: codeman-local <codeman@local>
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
Codeman maintainer