A capture load now replays its queued tail, and that replay runs through
`batchTerminalWrite`, which samples `_wasAtBottomBeforeWrite` before it queues.
It runs inside `chunkedTerminalWrite`, before that promise resolves, with the
terminal freshly reset and rewritten — so the sample is always true. The caller
then restored the reader's position and the next `flushPendingWrites` scrolled
straight back to the bottom off the latched flag, undoing it. The only thing in
the way was `_hasRecentUserScrollUp()`, a 1500ms window a server-triggered
refresh is usually past.
`_syncStickyScrollBaseline()` re-takes the flag from wherever the viewport now
sits, and the two paths that restore a position call it right after doing so:
`_onSessionNeedsRefresh` and `_maybeRefetchFullHistory`. Those are the paths
#259 and #205 exist for, and they are also where a non-empty queue is most
likely, since a needsRefresh fires when output is flooding. Re-taking rather
than suppressing the sampling: suppressing leaves whatever stale value the flag
held from before the load, which on the full-history re-pull has no reason to
be false. `selectSession` and `_onSessionClearTerminal` deliberately end at the
bottom, so the sampled true is already the truth there and they do not call it.
`_bufferLoadFinishOpts` gains the coverage the CI gate can see: both mux
sources flush, `history` does not, and a payload naming no source does not.
Its only coverage was the browser suite, which CI does not run.
The JSDoc and the changeset now record the one duplicate window this cutoff
cannot close. The server appends output to the byte buffer in the same tick it
emits, but broadcasts on a batch timer — 8ms over WebSocket, 16 to 50ms over
SSE — so a batch pending when `capture-pane` ran leaves the server after the
reply and is replayed although the capture holds it. It is one batch interval
wide against a recovery window spanning the whole chunked write, and closing it
means flushing that batch server side before the capture.
The second browser test asserts its session was created, so a failed create
fails it instead of passing with zero hits.
docs/architecture-invariants.md no longer claims the replay leaves the
queued-event discard window alone. That clause now describes what decides how a
load ends, the baseline rule, the batch window, and the three covering tests.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Live terminal events are queued while a buffer load runs, and the load discards
that queue when it ends. That is right when the loaded buffer is the server's
accumulated byte history. The route appends to that history right up to the
moment it serializes the response, so a queued event already appears in it and
replaying it would duplicate output, most visibly Ink's cursor-up redraws.
A tmux pane capture is a photograph, current only as of the instant
`capture-pane` ran. Output printed afterwards was queued and then dropped, and
nothing scheduled a re-fetch to recover it: `_onSessionNeedsRefresh` is wired
only to the 128KB overflow path. The CLI's next partial redraw then landed on a
frame the terminal never received.
How much went missing depended on which capture the route served. A `?full=1`
load returns the capture alone, with no history in front of it, so it lost
everything from the capture to the end of the chunked write. A `?tail=` load
returns history, a clear, and then the capture, and the route reads that history
after the capture, so it lost everything from the response to the end of that
write. The chunked write dominates either way. An agent CLI hides the loss on
its next full redraw; a shell session does not, because its output is linear and
nothing repaints it.
Queue entries now carry their arrival time, and `_finishBufferLoad` takes a
`since` cutoff, so a capture load replays exactly the tail that arrived after
the response headers. The earlier events stay dropped, because a payload that
carries history does hold those.
All four paths that fetch a terminal buffer and write it now decide this the
same way, through one `_bufferLoadFinishOpts` helper, so they cannot drift
apart: `selectSession`, `_onSessionNeedsRefresh`, `_onSessionClearTerminal` and
`_maybeRefetchFullHistory`. The second of those is the one that stings. It
exists to restore output the client already dropped once under backpressure, and
it was dropping more output while performing that recovery. The cache-hit write
inside `selectSession` stays on discard deliberately: it runs before the fetch,
so its queue holds only events the capture that follows already contains.
Two further things had to change for that tail to still exist when the load
ends, and a browser test is what found both. `chunkedTerminalWrite` is what ends
the load for every non-empty buffer, so the flush policy travels to its own
finish calls; the call in `selectSession` runs only when the write was skipped.
`_beginBufferLoad` no longer empties the queue when one load re-enters it, which
it does on every write, because that reset discarded the whole fetch window
before anything could replay it.
The response already distinguishes the sources. `source` reads `mux-visible` or
`mux-full-history` for a capture and `history` for the byte stream.
Follows #395, #396 and #397, which fixed the ways the replayed frame itself
could disagree with the terminal.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Rebased over #390, which moved the phone tier's cutoff from 430px to
600px. The palette's compound fold rule now lives in the 600-768px band
mobile.css pads, the cascade samples the palette inside that band, and
the closed iPhone Duo (466pt) is a phone rather than a small tablet while
the open one (626pt) stays a tablet. Comments in both stylesheets, the
device registry, CLAUDE.md and architecture-invariants say 600.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Ported from #416 (discussion #405): a statusline reading just `codeman`
is what a hand-run claude in a managed repo showed, and it reads as a
broken config rather than a footer. Three paths produced it and all
three now yield an empty footer: the exporter's `|| echo codeman`
fallback (now `curl -sfk ... || true`, with -f keeping an HTTP error
body off stdout), the unknown-session answer of POST /api/status-telemetry,
and formatSessionStatusText() with nothing to show. The exporter script
marker moves to V4 so live installs pick the new content up on the next
spawn.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Three small follow-ups from the #361 review.
A tmux setenv survives respawn-pane, so _configureStatusLineUserCommand
returning early when the user has no statusline left a previously
exported CODEMAN_USER_STATUSLINE_CMD in place: a user who deleted their
own statusline kept getting the stale one wrapped, and lost Codeman's
footer print-through, until the tmux session was recreated. It now
issues `setenv -u` in that case, the same shape as the effort-level
cleanup in applyEnvOverrides.
ensureStatusLineExporterScript truncated and rewrote a script that live
sessions execute on every statusline render, and chmod'd it after the
write. It now writes a temp file next to the target, chmods that, and
rename()s it into place.
The non-tmux direct-PTY fallback carries no exporter; that is now stated
at the spawn site and in the architecture-invariants paragraph rather
than left as a silent gap.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Two follow-ups to #361's sticky telemetry switch.
GET /api/settings reconciled an absent showPlanUsageLimits by persisting
true, but readJsonConfig() answers {} for ANY read failure (a parse
error, EACCES, EMFILE, a read landing inside PUT's non-atomic write), not
only ENOENT, and every page load calls this route, so one unlucky read
replaced the whole settings file with a one-key file. The route is a
plain read again and the default moved into the reader:
readPlanUsageTelemetryEnabled() treats an absent key as ON, the same way
readWorkspaceHooksEnabled() does, which is what the desktop chip already
shows for an install that never touched the setting.
saveAppSettings() sent showPlanUsageLimits on every save. The chip
defaults OFF on handhelds, so a phone saving its font size persisted
false and switched collection off for every desktop, whose chip then
went stale with no error anywhere. The key is now stripped like the
other per-device display keys and re-added only when the save FLIPS the
chip relative to what the device had (planUsageCollectionFlip), so an
explicit toggle on any device still writes it in either direction.
Tests pin both: the GET route with a mocked filesystem (absent, missing,
EACCES, garbage, explicit), the reader default, and the flip helper plus
its wiring in saveAppSettings.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
CLAUDE.md's folding-devices rule gains the two new invariants (a shape change
with the keyboard up baselines to window.innerHeight; a base gutter overridden
by a later @media block needs its own zero-base fold restatement, and a
compound rule written against a mobile.css shorthand is scoped to that band)
plus the architecture-invariants pointer it lacked; the new Folding devices
section there carries the mechanisms and the measurements. The device count
is 138 since the two Duo profiles landed (68 Playwright + 70 custom).
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Three cascade problems in the fold reserved-region CSS, each measured by
computed style in headless Chromium (styles.css + mobile.css in index.html
link order):
- The unconditional .path-picker-overlay / .path-preview-overlay fold rules at
the end of the file beat the `padding: 0` both overlays set under 600px, so
every phone got a 16px and 18px gutter on dialogs built flush (393 and 500px:
edges floating off the screen). The fold strip is now restated on a ZERO
base inside the same media query: 0/0 without a fold, the strip alone with
one, 16/18 plus the strip from 626px up as before.
- .modal.command-palette-modal was unscoped, so outside the 430-768px band
(where mobile.css pads the palette with a shorthand) it ADDED 0.75rem with
no gutter to compose with and pushed the shell 6px off centre at 393, 900
and 1400px, while inside the band the shorthand beat the generic .modal rule
on the bottom side and the palette lost its block-end gutter. The compound
rule now lives inside that band and restates both sides.
- The tabletop cap on .response-viewer lost to mobile.css's `max-height:
92dvh` under 430px (same specificity, later file). mobile.css now carries an
identical twin at its end.
test/foldable-layout.test.ts simulates the padding cascade across both files
at every breakpoint, with and without the fold rules, and requires the two to
differ by exactly the fold strip; it also pins the palette rule to the band
mobile.css keys on and the response-viewer twin to the styles.css value. Its
model reproduces the Chromium numbers, and against the pre-fix stylesheets it
fails on all three problems.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
A shape change with the keyboard up re-baselined initialViewportHeight to the
SHRUNK visual height, so heightDiff was 0 and the settle event the OS fires at
the new width (or any later address-bar drift) satisfied the hide branch and
ran onKeyboardHide() with the keyboard still on screen: accessory bar hidden,
toolbar lift dropped, main's padding cleared. It could not recover, since no
further 150px drop re-arms the show branch against a baseline already sitting
at the shrunk height.
Baseline to window.innerHeight instead when the keyboard is up: the page sets
no interactive-widget, so the keyboard shrinks only the visual viewport and
the layout viewport stays the display's full height on both engines, the same
fact updateLayoutForKeyboard() relies on.
The vm harness now models the two heights separately (resizeTo takes an
optional layout height) and pins the fold flavour (626x590, 466x378, 466x378),
the rotation flavour (393x359, 852x150, 852x160) and the eventual close. All
three fail against the old line.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Apple's "Designing for iPhone Duo" asks an app to adapt to both displays,
to stay continuous as the device opens and closes, and to treat the band a
partly-open display folds through as a reserved region. Three things here.
1. A visual-viewport resize that changes the WIDTH is the device changing
shape (a rotation, or a foldable opening or closing) and is never the
virtual keyboard, which only ever takes height. handleViewportResize()
read any height drop over 150px as the keyboard appearing, so closing a
Duo (890 to 678pt tall) latched keyboardVisible with no keyboard on
screen: the accessory bar appeared, main grew 84px of dead padding, and
updateAppHeight() stopped refreshing --app-height. The latch was sticky,
because clearing it needs the height back within 100px of a baseline
belonging to a display the user is no longer looking at. Rotating any
phone hit the same latch. The shape branch re-baselines instead, which
is also what lets a keyboard opened after the fold be detected.
2. The hinge is now a reserved region in CSS. --fold-inline-end and
--fold-block-end measure the strip to keep clear from the Viewport
Segments env() variables, and are 0px everywhere else, so the seven
centred overlays are inert by construction off a foldable. Each shrinks
its content box with padding rather than the box itself, so the backdrop
still covers the far side of the fold and still swallows taps there.
3. iPhone Duo (outer) and iPhone Duo (inner) join the mobile device
registry, derived from Apple's published pixel specs at 3x.
Verified in Chromium: flat, a dialog stays centred at 313 of a 626pt
viewport; in book pose it centres at 153 inside the 0-305 leading segment
with its right edge at 293, while the backdrop still spans all 626. The
3-term calc on the offline overlay resolves to 367px in tabletop pose and
20px flat.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Three instructions a future contributor would follow literally were stale after
the last review round: the "Adding a CLI" checklist sent the agent-image reason to
AGENT_IMAGE_SPECIAL_CASES, a constant that no longer exists (it is
discovery.install.agentImageLayer on the entry in stock.ts), the trust-boundary
paragraph credited the embedded-commands pin to the invariants test when it is
test/cli-catalog-sync.test.ts, and install.sh claimed "the parity test" pinned the
DeepSeek Harness banner when no test did. That pin now exists: the invariants test
asserts the script's grep literal and the registry's discovery.identity.regex agree
on "DeepSeek Harness", and the comment names it.
docs/docker-cases.md separated the two reasons a CLI stays out of the shared npm
layer (no npmPackage at all versus an agentImageLayer entry), which it had folded
into one, and architecture-invariants no longer lists the agent image's CLI set by
hand.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Choosing "s" (Skip) in the new catalogue-driven install menu warned, printed the
install hints and then fell into the shared "The selected AI CLI failed to install"
gate one line below, because CLI_FOUND_COUNT is 0 by construction inside that block
and skipping does not change it. The AI CLI check runs before the clone and the
build, so a user who picked the documented skip option ended up with nothing
installed. The code this replaced guarded the gate with an elif on the skip choice.
The menu moves out of main() into offer_ai_cli_install() and the gate moves inside
the install branch: skipping continues to the clone, a chosen install that leaves
nothing behind is still fatal. Being a function, the interactive path can now be
driven with a stubbed read_reply, which is what nothing reached before: two
behavioural tests in test/install-sh-invariants.test.ts run the real function in a
real bash (skip continues with exit 0, a failed install dies with exit 1), and the
bash 3.2 CI step drives the skip path in the container as well.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Follow-up to #390. PHONE_MAX had become 599, an inclusive bound, while
three of its four consumers still read it as exclusive (width < PHONE_MAX
for phone); the one site that switched to <= disagreed with
getDeviceType(). It is 600 again with < at every site. The breakpoint
table in docs/mobile-testing-report.md says 600, and the three 430px
visual baselines are removed: they depict the tablet tier now, and the
visual suite recreates a missing baseline on its next run on the machine
that owns them. device-matrix.test.ts is also run through Prettier, which
the commit hook demanded and the format gate (src/ only) never did.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
`scripts/pr-bot/` was maintainer tooling, not part of the server, the CLI or the
npm package: a Telegram bot that reviews open pull requests in Codeman sessions
and reports to the maintainer. It now lives in its own private repository and
keeps running unchanged, as a client of Codeman's HTTP API like any other.
It moved because it grew a second watcher, for GitHub Discussions, and shipping
that here would mean publishing the briefs it hands its review sessions, the
judgement calls in them and its safety model. None of that helps anyone
installing Codeman, and all of it is easier to change when it is not a public
interface. The move cost nothing structurally: the whole tree depended on one
external package plus Node builtins.
What this removes from the repo, and nothing else: the sources, their three test
files, `config/tsconfig.pr-bot.json`, `docs/pr-bot.md`, the `pr-bot` npm script,
the bot's globs in the typecheck/lint/format scripts, and its knip entry. CLAUDE.md
keeps a short pointer in place of the section, because the bot still constrains
work in here: it takes the `prbot-<n>` and `dscbot-<n>` session names on the local
Codeman, holds clones under `~/.codeman/pr-bot/`, and fetches pull-request heads
into `refs/pr-bot/*` of this checkout, which it must never check out or reset.
The CHANGELOG entries from 1.25.0 and earlier still describe it. That is history
rather than drift, and is left alone.
Verified after the removal: typecheck, lint and format:check clean, and the suite
passes 6843 tests across 357 files, which is the previous run minus exactly the
70 tests that moved out with it.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
With the repo root as the plugin root, `claude plugin install codeman@codeman`
copied the whole checkout into its cache and, because that root carries a
package.json, ran an npm install there: 832 MB, 511 packages and this repo's
postinstall build on every installer's machine (measured from a clean worktree
of the previous commit). A plugin root must be a directory without one.
The plugin is now `plugins/codeman/`: its manifest, a README, and a MIRROR of
`skills/codeman/`. A mirror rather than a symlink because the install copies
the plugin directory and a link pointing outside it would dangle; a mirror
rather than the source because every install path, injector and doc already
names `skills/codeman/`. `scripts/sync-plugin.mjs` (replacing
sync-plugin-version.mjs) mirrors the skill and syncs both manifest versions
inside `version-packages`; `test/plugin-manifest.test.ts` pins byte-identity,
the versions, the absence of a package.json in the plugin root and that the
repo root `.claude-plugin/` holds only the marketplace manifest.
`claude plugin validate --strict` now passes for both the plugin and the repo
root. Install commands are unchanged.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
`.claude-plugin/marketplace.json` at the repo root makes
`/plugin marketplace add Ark0N/Codeman` work, and the one plugin it lists is
the repo itself (`source: "./"`), whose one component is `skills/codeman/`.
So `/plugin install codeman@codeman` is a third install route next to
`npx skills add` and `codeman skill install`, and the skill shows up in the
plugin directories that index Claude Code marketplaces.
Both manifests carry package.json's version: `scripts/sync-plugin-version.mjs`
rewrites them inside `version-packages`, right after `changeset version`, and
`test/plugin-manifest.test.ts` pins the equality, the skill's frontmatter name
(without it the installed skill would be named after a versioned cache dir),
and that no other plugin component (`commands/`, `agents/`, `hooks/`,
`.mcp.json`, `settings.json`) appears at the repo root, since an install would
silently ship it.
Verified with `claude plugin validate` (one expected warning: CLAUDE.md at a
plugin root is not plugin context) and a local marketplace add, install,
details, uninstall cycle against a clean checkout of this commit.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Bold text on the theme's default foreground carries exactly ONE cue, the
weight step. Claude Code marks its markdown bold with a bare ESC[1m and
changes no colour, and xterm substitutes a bright colour for bold only
when the foreground is a palette index 0-7, so the substitution never
fires for default-foreground text. A family shipping only a regular and
a bold face keeps that step small (measured on Consolas: glyph ink rises
from 14.25% to 16.57%), and picking a different family does not help,
because 400 stays 400 whatever the family. Lowering the NORMAL weight is
the only way to widen the gap.
Two per-device settings beside "Terminal font" in the Font group, each
defaulting to xterm's own value for its slot, so an untouched install
renders exactly as it did before. Both thread into the main terminal and
the Agent Teams panes, and apply on save without a reload.
The bundled face had to be unclamped in the same change or the settings
would look broken on a stock install. fonts/jetbrains-mono-variable.woff2
carries a wght axis of 100 to 800, but styles.css declared the face
`400 700`, and the descriptor is what the browser synthesizes from: at
that range 100, 200 and 300 rendered identically to 400 and 800
identically to 700 (measured in headless Chromium, both directions).
The two families ahead of it in the default stack, Fira Code and Cascadia
Code, exist only if the user installed them, so for most installs
"normal = 300" would have been a no-op. Declared `100 800`, every step is
distinct: 61%, 77% and 90% of the ink at 400, and 800 adds ~14% over 700.
Nothing in the stylesheets asks for a monospace weight outside 400-700,
so widening it changes nothing that rendered before.
Details that are easy to get wrong and are pinned by tests:
- Each slot falls back to its OWN xterm default, so an unset bold weight
can never inherit `normal` and become a visible change.
- A live save refreshes both echo overlays. They cache
terminal.options.fontWeight and paint it into their spans, so without
it the characters being typed keep the old weight while the rest of the
screen changes. Most visible on a phone, where local echo is on by
default.
- A live save reaches open Agent Teams panes, which read their options at
construction, exactly as applyTerminalSkin() propagates its own.
- A stored weight the picker does not list (a hand-set 350) is added to
the select rather than dropped, so merely opening App Settings cannot
reset it.
- _awaitTerminalFont() is untouched. CharSizeService measures through the
CSS `font` shorthand, which resets the weight, so the measured face is
always the 400 one and a weighted descriptor would request nothing new.
Verified end to end in a headless browser against a live server: the save
reaches the running terminal with no reload, the settings PUT stays 200
(both keys are display keys and are stripped before it, since
SettingsUpdateSchema is strict), the value survives a reload, and the
painted terminal really changes weight with the bundled font (lit-pixel
ink 0.83 / 0.95 / 1.00 / 1.13 / 1.21 at 100 / 300 / default / 700 / 800).
Proposed and analysed by @irisitymichaelgrundberg in discussion #403.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
buildClaudeEnv(), the direct-PTY fallback taken when mux creation fails, now
reads getCli('claude').env and applies its unset and exports lists. It used to
delete COLORTERM and CLAUDECODE from a hand-maintained list of its own, which
left it contradicting the registry entry that the tmux pane and the attach
client both read. An engine value needing a mux name has nothing to resolve
against on this path, so it is skipped rather than guessed.
Claude no longer unsets NO_COLOR. The invisible-background bug does not need
it, and unsetting it overrides a preference the user set deliberately, so a
user who exports NO_COLOR globally keeps monochrome panes. The other seven
truecolor CLIs still unset it; that inconsistency is intentional and the
comment on the entry says so.
The invariants doc gains a Terminal colour env paragraph under Session launch
modes, where a reader looking up Claude will find it — the previous sentence
sat under a heading that lists only the non-Claude CLIs. It now says the lists
are the stock catalog and a clis.json override replaces them wholesale, and
that the declarations reach the tmux pane, its attach client and the direct
PTY but not a remote pane, whose command carries no env exports at all. Docker
hands COLORTERM=truecolor to every mode, including the two the registry says
must unset it.
The changeset named six peer CLIs and there are seven: deepseek also exports
truecolor. A test beside the existing OpenCode assertion pins the new
behaviour, so a future registry edit cannot make the backgrounds vanish again
in silence.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Rebased onto current master (the one real conflict was the import line
in docker-hosts.ts Ark0N flagged; kept both), then addressed every
point from the review:
**1. Rebase.** Done — this branch now sits on current upstream/master.
**2. Agent-image special cases are data now, not an id-keyed table
outside stock.ts.** `AGENT_IMAGE_SPECIAL_CASE_IDS`/`AGENT_IMAGE_SPECIAL_CASES`
are gone. `CliDiscovery.install.agentImageLayer?: { kind: 'dedicated';
reason: string }` is a field on the registry entry itself (pi,
deepseek), `reason` is required by schema.ts, both producers
(docker-hosts.ts and cli-catalog.mjs) filter on its presence instead
of an id, and the coverage test reads it from the generated catalogue.
Also added the npm-package-name validation to the TS producer, which
only the .mjs one had — same SAFE_PACKAGE regex, duplicated
(necessarily, one side can't import the other) and now pinned
byte-identical by a new parity test.
**3. Changeset said five, it's eight.** (Not nine — see the DeepSeek
point below, which changes the true count.) Reworded to state it
structurally rather than pin a number that will go stale again.
Then the four behavior-changing findings:
- **DeepSeek was offered as a normal install option but can't actually
drive a pane.** `npm install -g @deepseek-ai/dsh` installs the
launcher only; DeepSeek ships no profile that can run standalone.
The generator now emits an empty install command for any
`launcherProfile` entry, so install.sh's menu (which requires a
non-empty command) skips it and falls through to its docs URL hint
instead — matching what the old hand-written code did before this
PR replaced it.
- **wget-only hosts lost every automatic install, including the npm
ones that never needed curl.** The menu-building loop now filters
PER ENTRY (only a command starting with `curl ` is held back) rather
than wiping the whole menu when DOWNLOADER != curl.
- **The DISPLAY/TRUSTED split and the catalogue refresh didn't hold up
under review** (refresh's only real write was the label; it ran
before the Node existence check; its own eval-detection test was
tripped by the word "eval'd" in a comment). Dropped entirely per
your own recommendation — embedded catalogue only, no network
fetch, no second array. install-sh-invariants.test.ts now asserts
the refresh/DISPLAY machinery does not exist rather than testing its
internals.
The three take-or-leave items, applied:
- `dsh_banner_probe`'s bash 3.2 empty-array bug: `${runner[@]}` →
`${runner[@]+"${runner[@]}"}`. Verified live in a real `bash:3.2.57`
container with `timeout` removed from PATH — crashed before, clean
now, full `detect_all_clis` path exercised end to end.
- `docker-agent-image-coverage.test.ts` now anchors on each layer's
`<binary> --version` proof line instead of `Dockerfile.includes(binary)`,
which stayed true if a layer were deleted but its comment survived.
- Doc drift: docs/docker-cases.md (four → five, and now describes the
data field), docker/agent.Dockerfile's "other four CLIs" comment (no
longer a magic number — CLI_NPM_PACKAGES is generated and can grow),
CLAUDE.md's install.sh size (104KB → ~112KB) and its stale mention of
the now-dropped refresh.
Verified: tsc clean, prettier clean, the full targeted suite (142
tests across the 8 affected files) green, and the full `npm test` gate
diffed BY TEST NAME against a clean upstream/master baseline run on
this same machine — identical 201-name failure set both sides (168
tests / 67 files, all pre-existing Windows-environment noise: symlinks,
PTY spawning, POSIX permission bits — none of it touching anything
this PR changes), zero new failures either side of the diff.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01R9ZSTEenc8soSu9bTi8Xru
docker/agent.Dockerfile hardcoded the four npm-published CLIs it installs, one
of the several lists that had to be kept in step with the registry by hand.
It now takes them as `ARG CLI_NPM_PACKAGES`, supplied by
scripts/build-agent-image.mjs from config/clis.stock.json, with the default set
to today's list so a bare `docker build` still produces the same image. The arg
is expanded unquoted because word splitting is what turns the list into several
arguments, which is exactly why every token is validated against
^[@A-Za-z0-9][@A-Za-z0-9/._-]*$ on the producing side; a package name carrying a
space or a metacharacter is refused rather than reaching the RUN line. Verified
by building the layer: four packages in, four arguments out, and the default
still applies with no arg.
The list is filtered on each entry's `enabled` flag — the field whose absence
was the maintainer's §3 finding, where a CLI shipping disabled still got baked
into every image. No stock entry is disabled today, so that assertion would pass
vacuously; a unit test feeds the pure helper a fabricated disabled entry so the
fix is covered now rather than the first time someone ships one.
⚠️ It reads the STOCK catalogue, never the merged registry. A user's
~/.codeman/clis.json must not change what is inside an image tagged
codeman/agent:base, or two machines holding that tag hold different images.
Four CLIs keep hand-written layers because the registry cannot describe what
makes them special: pi's --ignore-scripts, deepseek's pnpm companion and dsh-tui
profile, and the three standalone installers. Rather than extend the schema for
a Docker-only benefit, the coverage test requires each to carry a written reason
AND still be present, so an exclusion cannot quietly become an omission.
There are two producers of this command line and there have to be — the .mjs
cannot import TypeScript, and src/docker-hosts.ts builds the same argv for the
in-app auto-build — so a parity test pins them together, package list, arg pairs
and rendered argv. Their order is pinned too: a different order is a different
RUN string and so a needless cache miss between the two build paths.
docker/server.Dockerfile is deliberately NOT edited (PRs #373 and #377 both
modify it); its narrower list is asserted as a declared omission list instead, so
the divergence is reviewable without touching the file.
Also fixes the in-app hint at index.html, which the new coverage test caught
still omitting omp.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_015EMxQreQUZX5ZyybxAGh12
install.sh carried nine search-path arrays, eighteen near-identical
check_<cli>/get_<cli>_path functions, and three separately hand-maintained
enumerations of all nine CLIs. They had to agree and did not: upstream b6d0f1fa
is "wire OMP into install.sh's CLI detection (it had none)", and the section
comment above the roll-call named six of the nine.
All of it now reads the generated catalogue. `detect_all_clis` resolves every
CLI in one memoized pass into CLI_FOUND_PATH/CLI_FOUND_COUNT; `check_cli` and
`get_cli_path` replace the eighteen pairs; the roll-call, the "no AI CLI found"
gate and the closing reminder become loops. Probe order per CLI is unchanged and
`test/install-sh-detection-parity.test.ts` proves it against the literals
transcribed from the arrays this deletes.
Behaviour changes worth naming:
- The install menu is built from the catalogue, so it offers every enabled CLI
that is not installed and ships a command — five instead of two. Gemini had a
command in the registry and appeared in NO list in this script.
- Its labels are now the registry's ("Claude" rather than "Claude Code"), the
same trade PR A made for `codeman doctor` rows. A suffix map would just be the
hand-maintained list again.
- On a wget-only host the menu prints commands instead of running them. The
registry's commands call curl, whereas the two literals this replaces went
through download_to_stdout; rewriting curl to wget inside a string we are
about to execute is the wrong instinct.
The trust boundary is mechanical, not a promise: CLI_INSTALL_CMD_TRUSTED is
written only from the generated per-platform arrays and is the only thing ever
executed; CLI_INSTALL_CMD_DISPLAY is what the optional, opt-in refresh may
rewrite. The refresh warns on all three failure shapes — empty body, unparseable
content, failed fetch — which is the silent-degradation bug from the review, and
it parses with node into tab-separated records read by `read`, never eval.
Bash 3.2 throughout (macOS ships it): parallel indexed arrays, offset/length
windows instead of delimiters, no associative arrays, namerefs, mapfile or
here-strings. Verified by executing the script under a real bash 3.2 container,
which is also now a CI step alongside `bash -n` and a catalogue `--check` — the
empty-window case (`shell` has no binaries) is a runtime `set -u` abort that
`bash -n` cannot see. Running it that way caught `detect_os` being called inside
the platform loop: ten forks, and ten copies of one error, since a `die` inside
`$( )` can only exit the subshell.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_015EMxQreQUZX5ZyybxAGh12
Two consumers of the registry cannot import TypeScript: `install.sh`, which runs
via `curl | bash` before any checkout exists, and `scripts/build-agent-image.mjs`.
Both currently hand-maintain their own CLI lists, and both have already drifted.
`scripts/generate-cli-catalog.mts` (`npm run generate:cli-catalog`, plus a
`--check` mode) emits from `STOCK_CLIS`:
- `config/clis.stock.json` for the `.mjs` and the tests. It carries `enabled` —
the field the earlier attempt omitted, which is how a disabled CLI's npm
package still got baked into every agent image.
- a marker-delimited block inside `install.sh`, embedded rather than fetched.
The embedded copy is the FULL catalogue on purpose: the earlier design fetched
it and fell back to a hardcoded two-CLI list, degrading silently on an empty
response. There is no degraded mode to fall into now.
The block is bash 3.2 safe: parallel indexed arrays, no associative arrays, no
namerefs, no mapfile. Variable-length lists use OFFSET/LENGTH windows into one
flat array rather than a delimiter, so a $HOME containing a space needs no IFS
handling and `shell` (no binaries) gets length 0 and is never iterated. Search
paths are emitted dir-major, matching the probe order the hand-written arrays
use and `test/install-sh-detection-parity.test.ts` pins.
Only fields the two consumers need are exported. `launch`/`env`/`capabilities`/
`overlays` are spawn-time concerns the server alone interprets, and a test
asserts they never leak into the artifact.
`main()` sits behind an `isMainModule()` guard so the sync test can import the
renderers. Without it, importing the module would rewrite the artifacts as a
side effect of checking them — passing always, guarding never.
This commit adds the block; it does not yet delete the hand-written arrays, so
the detection pin keeps measuring both against each other.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_015EMxQreQUZX5ZyybxAGh12
PR B replaces nine hand-written `*_SEARCH_PATHS` arrays in install.sh with one
block generated from `STOCK_CLIS`. This lands FIRST, against the hand-written
arrays, so the replacement has something to be measured against.
The arrays are not uniform, which is why "generate them from the registry" is a
claim rather than an obvious truth: claude alone has `~/.claude/local`, opencode
alone has `~/go/bin`, opencode/codex/gemini/pi/omp carry `~/.bun/bin` while
dsh/grok/agy do not, and omp's `~/.omp/bin` sits second rather than first. A
generated list that silently narrows leaves a user with that CLI installed being
told no AI CLI was found — upstream `b6d0f1fa` is that bug, fixed for omp by
hand after it shipped.
The test asserts a three-way identity: the pinned literals equal what install.sh
contains today, AND equal `searchDirs x binaries` from the registry, dir-major so
the probe ORDER is pinned too and not just the set. Both halves were verified to
fail independently — dropping one path from install.sh fails the first, changing
one `searchDirs` entry fails the second — because a pin that cannot fail is
worse than no pin. A fourth case asserts every stock CLI with a binary is
covered, which is the omp bug restated so it cannot recur silently.
No production code changes.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_015EMxQreQUZX5ZyybxAGh12
A Fable 5.1 reviewer read the whole release diff against 1.26.2 and returned
SHIP WITH FIXES. These are its findings, verified before acting on each.
**The changelog advertised a feature the code refuses (major).** The #401
changeset and docs/web-tabs.md both listed `*.localhost` in the loopback set.
The follow-up in 02b0e278 moved it out of the auto-route set on security
grounds and updated CLAUDE.md but neither of those, and that changeset becomes
the 1.27.0 CHANGELOG entry: a user would have read the release notes, tapped
`http://app.localhost:3000/` on a phone and got a connection error from a
documented feature. Both corrected, and the user guide now says why it is
excluded and that adding such a dashboard by hand still works.
**Dictation delivered its text twice (minor, #388).** `keydownSnapshot` started
`null`, so `keydownSnapshot ?? canonicalCount` at the input event read a counter
xterm had ALREADY bumped: on a fresh page load with no keydown yet, xterm's own
capture listener forwards the `insertText` itself (it is not gated behind a
keydown), then the snapshot equals the bumped count, `count > snapshot` is
false, and the controller emits the same text again. Reproduced directly
against the module: it emitted `hello` for input xterm had already delivered.
A `0` baseline restores that file's own invariant, that a missed recovery is
acceptable and a duplicated keystroke is not. Two regression tests, covering
both the xterm-already-delivered and genuinely-dropped halves.
**The sorted rail's arrow-key walk followed the DOM (minor).** `_tabKeydownHandler`
steps `querySelectorAll` order, which is `sessionOrder`, while a sorted rail
paints its rows with the flex `order` property, so ArrowDown from the top card
landed wherever that session happened to sit in the tab order. It now sorts its
node list by the COMPUTED order first: computed rather than inline, because web
tabs take their `order: 9999` from CSS and would otherwise read as 0 and lead
the walk. This is the one place that follows the paint; the Alt+N badge, the
drag model and the filter all still deliberately read the DOM.
**A trusted dashboard was auto-reused by a tapped link (minor, #401).** The
reuse loop skipped `managed` and direct-mode records but not `trusted`. A
trusted frame is mounted with `allow-same-origin`, i.e. on Codeman's origin
with the user's cookie, and these links come from agent output, which is the
threat model the loopback allowlist was just narrowed for. An agent that can
write into the dev server's tree could print a path that one tap opens inside
that privileged frame. Excluded from auto-reuse, with a test; opening it from
the Run dropdown is still an explicit action and unchanged.
**Two documentation claims that were no longer true.** CLAUDE.md said
test/location-overlay-commands.test.ts pins every remote pane command, but
remote claude and remote omp now have their own arm in `buildRemoteLaunchCommand`
and never reach `defaultRemoteCommandForMode`, which is what that test asserts,
so it pins nothing for them and changing either arm will not fail it. Named the
real pins instead. Also documented the arrow-key-walk exception in the rail
paragraph.
Left as follow-ups, deliberately: `POST /api/webviews` does not dedupe by URL
server-side, so two devices tapping one link concurrently can still save two
dashboards for one origin (pre-existing endpoint behaviour that #401 makes
reachable by a tap), and the location-overlay golden should assert the real
remote claude/omp commands rather than a branch neither reaches.
Full gate green: 359 files, 6869 tests.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The vertical rail lists exactly the sessions both home screens list, so it now
answers their question the same way instead of showing the raw tab order.
Order: new per-device `tabRailSort` (App Settings -> Appearance -> Tabs ->
Vertical Rail Order, default "By activity"). It runs `CodemanSessionOrder` over
rows classified by `_mobileOverviewState`, i.e. literally the home screens'
comparator, `lastSubmitAt`-anchored running group included.
It is applied as the flex `order` property, never by reordering the DOM.
`#sessionTabs` stays in `sessionOrder`, which is what keeps the Alt+N badge
honest (it names a shortcut, not a row position, so it deliberately does NOT
run 1,2,3 down a sorted rail), and keeps drag-and-drop, the arrow-key walk, the
sidebar filter and `_scrollActiveTabIntoView()` all reading the list they
always read. A session changing state then moves one inline style instead of
forcing the full rebuild that would restart every card's animation on every SSE
tick. The incremental render path re-applies it, since a state flip adds no tab
and never reaches the full rebuild, and an empty string is what clears it when
sorting stops. Web tabs are pinned past the cards by a CSS `order: 9999`, since
`renderWebviewTabs()` emits the same markup for every layout and the flex
default of 0 would interleave them. Drag is switched off while sorting (the
drop rewrites `sessionOrder` correctly and the sort puts the card straight
back, so the affordance would be a lie); 'manual' is the way back.
Cards: detailed rail rows become bordered cards on `--bg-card`, with the stamps
line on its own full-width row and the pill at its right end. The state dot
goes 6px to 9px, keeps its orbiting ring while working and gains the green
halo; idle mutes toward `--text-muted` as the home rail does. Needs/error/
waiting reuse `home-sessions-blink-red`/`-yellow` rather than a second copy.
These card rules are RAIL-SCOPED and deliberately absent from the comma-grouped
selectors that carry both vertical surfaces: the rail is an occasional,
resizable list you scan, while the sidebar is a permanently-docked nav column
where 20 stacked cards read as a wall. Every state-dot rule also excludes
`.tab-alert-action`/`.tab-alert-idle` by hand, because those alert rules are
only (0,3,0) and these are (0,5,1)+.
Lines: the lineage bracket already drew in the rail, but its track sat 6px from
the left edge, so half of its 11px outer glow was clipped by the window frame
and it read as a thread pinned to the frame. It now runs at 10px, mid-channel
in the gutter the rail already reserves.
Tests: test/tab-rail-order.test.ts (17) drives the real `isTabRailSorted()` and
`_tabRailSortOrder()` out of app.js, covering the row model (a WORKING row
ranked by `lastSubmitAt`, which would otherwise rank every running turn as
freshly started and fail no rendering test), the Alt+N badge, and the opt-out.
Verified in Chromium across sorted/manual/simple/header-strip/sidebar with the
setting flipped at runtime: no page errors, and the header strip and sidebar
render byte-identically to before.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Each item is from the pre-merge review of the PR it names, applied on master
rather than by pushing to a contributor branch.
#400 (response viewer, shenlvkang-collab)
- The brief view opened at `scrollTop = 0`, right when it was a single card
holding the last row. Now that it renders the whole turn, the top is the
turn's first narration line and the answer can be screens below it, while
loadFullContext already scrolls to the bottom of the same turn. A multi-row
turn now opens at its newest text; a single card still opens at the top.
#401 (loopback links as web tabs, shenlvkang-collab)
- Drop `*.localhost` from the auto-route set. Every other member is an address
literal that can only mean this box; a `*.localhost` DNS name is not one, and
a resolver with a search domain retries `evil.localhost` as
`evil.localhost.<search domain>`. The link source is agent-written terminal
output, so that set is the whole confinement on a tap that makes Codeman
fetch a URL server-side and persist it. The page-side test stays broader
(`isOnBoxHostname`), where a false positive only declines to proxy.
- A link to the origin root navigated nothing: the path was flattened to '',
which openWebview reads as "no deep link", leaving an open frame where it was.
- `this.webviews` being set does not mean it is loaded. initWebviews() assigns a
truthy empty map and only then awaits the list, so a tap during page load
found nothing to reuse and POSTed a duplicate record. Join the in-flight
refresh instead.
- One dashboard per dev server rather than per host spelling, which is what the
method's own comment already promised.
- Toast on the auto-create: it writes webviews.json, broadcasts over SSE and
adds a Run-dropdown row on every signed-in device, with a new tab as its only
previous signal.
#362 (remote omp continuation, timkjr)
- Accept the allowlisted `mode === 'omp'` arm as-is; a blanket registry render
would hand deepseek a locally-resolved --profile and bypass claude's own
overlay. A registry-declared switch is the follow-up if a third mode needs it.
- Revert the whole-file Prettier reformat of docs/remote-sessions.md (docs/ is
hand-formatted and outside `npm run format`), keeping only the two new
sections.
- Correct three stale passages: architecture-invariants' `exec claude
--dangerously-skip-permissions`, the `exec <cli>` paragraph (claude and omp
now have their own arms, and the claude pane's PID is the login shell), and
omp-integration's `-c 'omp'`. RemoteCommandMode gains deepseek and omp.
- Add the missing `_maybeCaptureOmpSessionId` remote-guard test; the sibling
guard in `_pinOmpRespawnId` had one and this path runs earlier, on the first
idle turn.
#388 (keyCode 229 recovery, aakhter)
- Gate notifyCanonicalData on shouldSuppressTerminalQueryResponse and
isTerminalFocusOrMouseReport. onData also carries the DA/DSR/CPR/OSC replies
xterm answers during Ink redraws and its SGR mouse and focus reports; any of
those landing between the keydown and the candidate's resolution was read as
"xterm spoke for this keystroke", standing the recovery down and leaving the
character dropped, worst on a busy agent pane. Reached through
window.CodemanTerminalInput: the predicates live in a module IIFE that closes
long before this call site, so bare references would throw into the
surrounding try/catch and stop the notify from ever running.
Every fix has a test that fails without it (verified by reverting each).
Full gate green on the combined tree: 358 files, 6849 tests.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
planUsageChipEnabled() (settings-ui.js) shows the header chip and the App
Settings checkbox as already ON whenever showPlanUsageLimits has never been
set — a discoverability default from 1.9.3. readPlanUsageTelemetryEnabled()
(hooks-config.ts) deliberately treats an absent key as "no telemetry" — a
privacy default, pinned by its own unit tests (never POST usage data
without an explicit persisted yes). Nothing reconciled those two
independent guesses, so a fresh install showed a checked box that silently
collected nothing until the user opened Settings and hit Save at least
once.
Verified live: an install that had never touched this setting had no
showPlanUsageLimits key in settings.json at all, and its running Claude
process's argv carried no --settings flag — zero telemetry ever collected
despite the chip rendering as enabled.
GET /api/settings now persists the resolved default (true) the first time
the key is truly absent — not explicit false — so "chip visible" and
"telemetry collected" become the same fact. readPlanUsageTelemetryEnabled's
own absent-means-false contract is untouched; after this runs once the key
is never absent again, so that branch stays correct in isolation while
being unreachable in practice for any install that has ever called this
route. An explicit false set afterward is respected forever.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
An agent prints `http://localhost:5173/` (a dev server, a preview it just
served) and the user taps it on a phone. That address only exists on the
Codeman box, so the link was a guaranteed connection error from any other
device — while the web-tab proxy fetches from the server, where it works.
A loopback link (`localhost`, `*.localhost`, 127/8, 0.0.0.0, ::1) activated
in the terminal or clicked in the Response Viewer now opens as a proxied
web tab whenever the Codeman page itself is not on that box. A saved
proxied dashboard on the same origin is reused, with the link's own path,
query and fragment opened inside it (a mounted frame is navigated, not torn
down, so its state survives); otherwise one is saved under its host:port,
sandboxed like any other web tab, so it is in the Run dropdown next time.
Only loopback is routed this way. A LAN or tailnet address may well be
reachable from the device (a VPN, the same Wi-Fi) and a direct open is the
cheaper, richer path, so those keep opening in a new browser tab; on the
box itself every link opens directly. The terminal link provider and the
viewer's click handler consult one hook and fall through to their existing
behaviour when it declines.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01McLWqCWBuQYGuPMScb4Aou
The eye button rendered `data.text`, which is one row: the last assistant
row of the transcript. A Claude answer is a median of 3 model messages
(p90 11) split around tool calls, so the brief view usually showed the tail
of an answer ("Done.", "Let me look.") and the substance appeared only after
More. The full view was fine, which is why the brief one read as broken by
comparison.
The brief view now asks `?context=turn`. The reader answers with the
assistant messages of the last ANSWERED turn (`selectLastAnsweredTurn`: the
highest `turn` that has an assistant row, so a prompt queued after the
answer does not blank the view) and the frontend renders them exactly as
the full view renders that turn: one badge, then continuation segments,
gated on the numeric `turn` as before.
`data.text` is unchanged in every context — still the last assistant row,
never `messages.at(-1)` — because agent pollers hash it. Readers that emit
no turns (Codex, the pane parser, DeepSeek, an older server) return `text`
only for `context=turn`, and the brief view keeps its single card for them.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01McLWqCWBuQYGuPMScb4Aou
The picker's current-folder line was a read-only breadcrumb, so reaching a
deep folder meant tapping through every level, and the listing was fixed to
name order, so the file an agent had just written was somewhere in a
500-entry list.
The current folder is now an editable field: Enter or Go jumps there, a full
file path lands in its folder with that file selected, and a path that does
not resolve keeps the listing you had and says so, instead of the reset to
the root that a stale initialPath gets. A Sort control orders the listing by
name or modified time in either direction, folders always first, and the
choice is remembered per device like the hidden toggle. Each entry shows a
compact modified time (time of day today, month-day this year, else the
date).
GET /api/filesystem/browse stamps every entry with mtimeMs to make that
possible; the stat that already fetched a file's size now serves both, so
it is still one stat per entry. Entries without an mtime (an older server,
the in-container listing) sort after dated ones and then by name.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01McLWqCWBuQYGuPMScb4Aou
An iOS-style focus pull: the thing arrives out of focus and the blur fades
off it as the opacity comes up. Opacity leads the blur (full opacity around
45%, blur still lifting), which is what separates it from a cross-fade.
Ships on tabs (440ms), agent windows (560ms), the terminal pane (520ms) and
connection lines (380ms), plus a `Soft focus` theme that sets all four.
Default stays `legacy`, so an untouched install is unchanged.
The terminal pane is the one surface that cannot blur itself the documented
way, and `blur` takes a deliberate exception to the "never a filter on
.terminal-container" rule. Every alternative was measured against a live
xterm and does not work: a backdrop-filter veil on ::before blurs perfectly
while STATIC, and Chrome silently drops the backdrop the moment ANY
animation runs on that pseudo-element (the veil computes blur(15.3px) while
the text behind it stays razor sharp); driving the radius from rAF buys the
same full-screen blur per frame plus main-thread work. The cost the rule
exists to avoid is inherent to blurring a terminal, so the style buys it
knowingly: opt-in, off by default, one ~520ms run per session open, class
straight back off, will-change still unset. Worst-case price, headless
SwiftShader with no GPU: frame deltas 16.7ms -> 33.3ms for the run, against
16.7ms flat for `fade`. cols x rows measured unchanged at 178x38 before,
during and after, so FitAddon never sees it.
The line entrance animates `filter` too, where each line already carried
its glow. Both kinds now hold it in --line-glow and both keyframes say
`blur(N) var(--line-glow)`, so the function lists match and interpolate
instead of the glow vanishing for the run and popping back (a lineage
line's glow is a different colour, set per element). Its 100% frame omits
`opacity` on purpose so the endpoint comes from the element's own resting
value: 0.9 subagent, 0.72 lineage, 0.95 working.
test/entrance-animations.test.ts is a new static guard over the whole
feature, not just this style: the rule -> keyframes -> theme-option chain a
style silently does nothing without, the terminal's paint-only property
allowlist (the FitAddon rule), the --line-glow contract, and reduced-motion
coverage. Mutation-checked both ways.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The 50MB cap on file-raw, the attachment /raw route and /api/download was
memory protection for a `readFile()` that no longer exists: file-raw and
/raw were rewritten to stream through `sendFileBody()` and answer Range
requests, so size costs a read stream rather than RSS (measured: a 600MB
download moved peak RSS by ~37MB). All the cap still did was refuse
legitimate downloads of build artifacts, videos and archives.
It is now MAX_FILE_DOWNLOAD_BYTES in config/buffer-limits.ts, default 2GB,
env CODEMAN_MAX_DOWNLOAD_BYTES, 0 = unlimited. `parseByteLimitEnv()` is
separate from the `parseInt(...) || default` idiom used elsewhere in that
file precisely because that idiom reads 0 as falsy and would silently
restore the default for the one value that means "no limit".
/api/download was the last route that really did buffer the whole file. It
now shares sendFileBody() with the other two, so it streams, advertises
Accept-Ranges, and is resumable. Its Content-Disposition also goes through
buildContentDisposition() rather than raw interpolation.
Refusals move from 400 to 413 across all three, which is the correct status
for the case; with the cap at 2GB it is a path almost nothing reaches now.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Review of the previous commit found that waiting for the font does not, on its
own, do anything.
`FitAddon.proposeDimensions()` measures nothing — it divides the container by a
CACHED cell size, and xterm refreshes that cache only from `open()`, from a
resize that actually changed the grid, and on a device-pixel-ratio change.
Nothing in it listens for font loading. So a fit that runs after the font
arrives can still divide by the fallback cell, propose the grid it already has,
and short-circuit before anything re-measures. The wait now ends by calling
`_charSizeService.measure()` itself, which is the step that makes the following
fit see the real font. Private API, as FitAddon's own dependency on `_core` is,
and guarded because a terminal can be disposed mid-wait.
The wait was also unbounded, and it sat behind the buffer-load gate. Neither
`FontFaceSet.load()` nor `FontFaceSet.ready` has a deadline, so a font request
that never settled left the tab spinning with live output queued behind it —
permanently, and on every session, since they share one promise. The comment
claimed the opposite ("a font that never loads must not block the terminal, so
this always resolves"), which was true of the per-face loads and false of
`ready`. It is now raced against TERMINAL_FONT_WAIT_MS, and the await moved
ahead of `_beginBufferLoad` so a slow font cannot hold output back at all —
which also removes the stale-select interaction with `_restoringFlushedState`,
since that flag is not yet set when the wait runs.
The awaited set no longer includes faces that cannot move the measured cell.
The bundled symbols font is ~1.2MB of private-use-area glyphs and xterm
measures `W`, so awaiting it put a megabyte in front of the first frame for
nothing; the generic families match no FontFace at all.
A runtime font change had the same race the boot-time one did:
applyTerminalFontFamily wrote the new family and fit on the next line, against
a family the browser might not have loaded. It now re-arms the wait and fits
again when it settles.
The claim that this could not be tested was wrong: the repo's vm harness
reaches both halves. The new suite pins the family filter, the forced
re-measure, the deadline, a rejecting load, a browser with no font API, and a
terminal disposed mid-wait — plus the four ordering properties in
selectSession, including that iOS Safari's synchronous focus still precedes the
first await. Each assertion was checked by reverting its fix.
Also corrects the docstring's reason for calling `document.fonts.load` (the
stylesheet is render-blocking and long parsed by then; the real reason is that
the WebGL renderer rasterises through a canvas atlas, and canvas text never
triggers a CSS font fetch), restores the JSDoc block the previous commit
displaced from getTerminalDimensions, and fixes a comment that described the
first fit as already having run when the mobile-Safari branch defers it.
Review of the previous commit found the guard inverted: the three skips keyed
on `?full=1`, which is only what the client asked for. When the capture comes
back null — ENOBUFS, a timeout, a vanished pane, or a session with no mux at
all — the reply falls back to the byte history, which IS a stream of
successive frames and still needs stripping. Gating on the request returned it
whole: measured at 82KB against 4KB for the same buffer without `full=1`. A
direct-PTY session takes that path on every first selection, not only during
an outage. The skips now key on `isFullCapture`, meaning a capture arrived.
Three further defects the same review surfaced, all on this path:
Keeping the trailing rows is only sound when a cursor move follows to count
back up from them. On the two branches where the cursor query fails there is
no move, so the caret was left at the bottom of the pane — worse than before.
The cursor is now read first and settles both decisions together.
The move is relative rather than absolute. `CUP` numbers rows from the top of
the browser's screen, so it is only right while the browser's row count equals
the pane's, and `resizeWindow` does not wait for tmux, so a capture can be
taken before a requested resize applies. Measured against real tmux with a
browser four rows shorter than the pane: the absolute move lands on a blank
row, the relative one lands on the caret's row.
An all-blank pane no longer reads as content. Retaining trailing rows and
appending a move made it non-empty, and the caller treats non-empty as "replay
this", so a blank screen would have replaced real history — the downgrade
`_replayWouldShrinkBuffer` refuses, arriving from the server side where that
guard cannot see it.
The documentation claimed one line per screen row. `-J` joins a hard-wrapped
row into its logical line, so that is false whenever any row wrapped: measured
at 10 lines for a 12-row pane. Both entries now say what actually holds, and
the stale "NOT repositioned" contract in the mux interface is updated too.
Tests: the byte-history fallback is stripped, an empty capture leaves history
intact, and the extracted helpers are unit-tested directly rather than through
source-text matching. The slice window in the capture test is bounded at the
next method, having overrun into its neighbours.
Review of the previous commit found four defects in it.
The guard sat above the local fit, so it suppressed a reflow as well as the
server write. tab-rail-resize performs its single settle-time refit through
sendResize and has no fallback for a truthy activeSessionId, so dragging the
rail stopped reflowing a detached session's terminal in the dashboard. The
mobile-keyboard guard fourteen lines below already draws the line correctly —
withhold the send, never the reflow — and the guard now sits after the fit.
_lastResizeDims is one value for the whole window, and both guards skip
updating it, so while a popup owns a session that value no longer describes
the PTY. _redock repaired it only for the active session. Pop out A, switch to
B, close the popup: selecting A later found unchanged dimensions, returned
"unchanged", and selectSession skipped its 400ms redraw wait — while the
server, comparing against the real pane, did resize and did raise SIGWINCH, so
the fetch painted the pre-redraw frame. _redock now clears the record on every
path, active or not.
_redock could also fire a resize for a session already gone: _onSessionDeleted
redocks before cleanup, so the id can be dead and the request is a guaranteed
404. It now checks the session still exists.
restoreTerminalSize — the header's redraw button and Ctrl+Shift+R — silently
did nothing for a detached session while still reporting success with
dimensions nothing was set to. It now says the session is sized by its own
window, where the same button works.
The `force` comment claimed a client-side dedupe that does not exist; the
deduplication is server-side against the real pane. Corrected to say what the
flag actually buys. The _redock doc comment now records that the function
writes to the server and is not idempotent.
Tests: _redock was the untested half and is the half three of these defects
sit in. It now has coverage for clearing the stale record on both the active
and inactive paths, re-asserting only for the session being shown, and staying
silent for a deleted session. The existing sendResize test now asserts the
local fit still runs.
Switching to a session left the caret one row below the composer's input
line, on the box border, and every cursor-relative update the CLI sent
afterwards was measured from the wrong row. Any fresh output repaired it,
because the CLI then repainted the whole frame.
Two things were wrong with the full-history replay, and they compound.
The capture never restored the cursor. The visible-frame path ends with an
absolute cursor move back to the pane's position; the linear path returned
its text and left the caret wherever the last character landed, which for an
agent CLI is the bottom-most row carrying text — the status line.
The rows it addressed did not line up with the pane's rows either. Four
transforms ran over the capture and each can delete a line: the trailing
blank rows were stripped, redraw-bloat stripping ran, the trim that cuts
everything above the Claude banner ran, and leading whitespace was removed.
All four are right for a byte stream of successive frames. A capture is the
rendered pane, one line per screen row, so each deletion shifted the frame
out from under the restored cursor.
The full-history path now appends the pane's own cursor position and keeps
every row, so row N of the reply is row N of the pane. The visible-frame and
tail paths are untouched.
Restoring the cursor is what makes row alignment load-bearing here, and
neither CLAUDE.md nor the architecture invariants said so — which is how
four line-deleting transforms accumulated on the path. Both now record it.
Verified against a live 315x59 pane: the reply carries 59 rows, its row 55
is the composer's input line matching tmux, and it ends with the cursor move
that lands there.
