mirror of
https://github.com/Ark0N/Codeman.git
synced 2026-09-30 12:39:42 +02:00
60c9af059945a3aca5a7219d8242b71069167aa7
2268
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 Ark0N
|
60c9af0599 |
Merge pull request #435
fix(terminal): replay a pane capture at the geometry it was taken at |
||
|
Ark0N
|
2d842ded35 |
Merge pull request #454
fix(run): make the Instance count stepper work for every non-Claude mode |
||
|
Michael GrundbergandClaude Opus 5
|
95dc6fe944 |
fix(terminal): remember a geometry replay that did not converge
`resizeRetry` caps the recursion inside one select and says nothing about the next one, so a pane this browser cannot size reported the same mismatch on every select and bought the same failed repair each time: two fetches per tab switch for the life of the page, measured as a running count of 2, 4, 6 across three selects. That is the case this branch describes as happening every time rather than occasionally, a phone whose resize `Session.resize` declines while a desktop claim is live, and it is not the only one — any pane Codeman cannot size lands there, including one a second tmux client is also holding. Each wasted pass costs another `capture-pane`, which is `execSync` and blocks the server's event loop, plus a reset and chunked rewrite, a discarded snapshot and cache entry, and a dropped and reopened WebSocket. `_geometryRetryUseless` mirrors the existing `_fullHistoryRepullUseless`: a retry pass whose frame still does not fit adds the session, geometry that fits removes it, and the replay gate consults it. The proof has to come from a retry pass rather than a first one, because the retry ran at the size that stuck and the pane ignored it. Clearing on a fitting frame is what stops a pane that becomes sizeable again, once the desktop tab closes or its claim goes idle, from staying permanently unrepaired. The race case never reaches the latch, since it converges on its first attempt. The new browser case walks all of that: three selects reading 2, 3, 4 instead of 2, 4, 6, then a fitting frame, then a mismatch diagnosed afresh. Without the gate it fails on the second switch with `expected 4 to be 3`. Rebased onto master, which has moved to 1.30.0 and taken #436. The one conflict was `config/test-suites.ts`, where both branches appended a glob to `BROWSER_TEST_GLOBS`; both are kept. Everything else merged clean, #436's own changes to the same buffer-load path included. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
Michael GrundbergandClaude Opus 5
|
383f834704 |
fix(terminal): flush unsent local echo before the geometry replay
On a touch device the characters the user has typed live only in the local-echo overlay until Enter; they have never reached the PTY. The replay re-enters `selectSession` with `forceReload` on the session that is still active, and that branch nulled `activeSessionId` before `_cleanupPreviousSession` ran. The flush there is guarded on a session it can still see, so it was skipped, and the unconditional `_localEchoOverlay.clear()` that follows took the characters with it. Measured in chromium against the previous head: typing into the overlay and then making the call the replay makes left `pendingText` empty with nothing crossing into the delivery layer on either transport. The flush moves into `_flushLocalEchoTo(sessionId)`, called from both `_cleanupPreviousSession` and the `forceReload` branch before it nulls the id. The session is a parameter because the two callers mean different ones: cleanup flushes to the tab being left, the branch to the tab being reloaded. This was reachable before this branch, through the one gesture that already takes the `forceReload` path on an active session. What is new is that nothing the user does triggers it. The replay fires on its own the moment a tab switch finishes, which is exactly when someone typing into a still-loading terminal has text in the overlay, and on a phone beside an active desktop tab that is every tab switch. A seventh browser case pins it: it forces the overlay on, since headless chromium reports no touch support and the case would otherwise pass vacuously, asserts the typed characters really are sitting unsent, then triggers the replay and asserts they reached the session. Without the fix it fails with nothing delivered at all. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
Michael GrundbergandClaude Opus 5
|
e0d4477edc |
fix(terminal): keep the geometry replay to the pass that can converge
Three follow-ups to the source gate, each one measured rather than reasoned. A pane already drawing at the size the client just requested is left alone. The replay runs at `dimsAfterLoad`, so it can only change what is on screen if the pane was drawing at some other size; when the reported geometry already IS that size, the second pass captures the identical frame and pays a full reload to do it, including a visible re-flash, a dropped and reopened WebSocket and a deleted xterm snapshot. That equality is the signature of a clamp rather than a race: `getTerminalDimensions()` floors at 40x10 while `fitAddon.fit()` does not, so a terminal narrower than 40 columns or shorter than 10 rows reports a pane permanently bigger than itself and replayed on every tab switch without ever converging. A race never produces the equality, since its premise is that the pane was still at the size it was asked to leave. The declined-resize case does not produce it either, so that one still costs the single capped attempt and needs the pane-ownership question this does not touch. The full-history re-arm is unreachable and now says so. A pass that consumed the flag sent `full=1`, and the route answers `full=1` with `mux-full-history` or `history`, never `mux-visible`, so the source gate already rules out every such pass. The line stays for the invariant, but its comment no longer reads as if a page load retries, and the suite pins that it does not. The response no longer reports geometry for a body that carries no capture. The full-history path writes `capturedGeometry` from the cursor query and then returns '' for a pane holding nothing visible, which drops the source to `history` with the geometry already recorded: a `full=1` request whose capture reported 100x50 and returned nothing answered `source: "history"` with both fields set. Nothing acted on it, because the client ignores geometry on any other source, but the field said a frame had been drawn at a size when none had. The browser stub now derives `source` from the request the way the route does, rather than answering `full=1` with `mux-visible`, which the route cannot produce. Each case reaches a visible-frame response the way production does, by not being the first select of the page. Three cases pin the new behaviour and each fails without its guard: the clamp case sees two fetches instead of one, the scope case and the full-history case both see a replay the gate forbids, and the width case sees one fetch instead of two. The changeset now describes the change from 1.29.x rather than the difference between the two commits on this branch. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
Michael GrundbergandClaude Opus 5
|
5cfb98fb8b |
fix(terminal): compare capture geometry only on a visible-frame response
Only a visible-frame capture positions its rows absolutely, so only that frame can be damaged by a terminal of the wrong size. A `full=1` body is linear scrollback closed by a relative cursor move, which is relative precisely so the browser's row count need not match the pane's, and a `history` body is the byte stream, which carries no row alignment to protect. The geometry comparison ran on all three, so it fired most often on the one response it cannot help: `_fullHistoryLoaded` is empty on the first select of every non-shell session per page, and a session whose pane a desktop tab holds too tall to ever fit then paid a second whole-scrollback capture, reset and replay on every page load and every first tab switch. `framePositionsRowsAbsolutely` gates both the captured-geometry comparison and `sizeMovedUnderLoad`. A size that moved under a byte-stream or scrollback replay is healed by xterm's own reflow plus the SIGWINCH the trailing `sendResize` already sends. A pane WIDER than the terminal damages the same frame a second way, so `captureCols` is now compared rather than only logged. `formatPaneSnapshot` paints each row out to the pane's own width, so a narrower browser wraps every painted row, and the wrap on the last one scrolls the whole frame up by a row. The terminal response no longer falls back to `session.ptyCols`/`ptyRows` when the capture reported no geometry. The cursor query is what produces the absolute addressing in the first place, so a capture that lost it returned a raw frame that was never positioned, and a byte-history response was never positioned either. Naming the session's own PTY size there described a frame that does not exist and invited a repair for damage that is not present. `_ptyCols` is also written only by `resize()` while the PTY is spawned at the size queried from tmux, so it can be wrong on its own terms. Both fields are now absent instead, and the `Session` getters added for that fallback go with it. Two browser cases cover the new behaviour and each fails without its fix: a `mux-full-history` response with both dimensions mismatched asserts one fetch (two without the gate), and a `mux-visible` response wider than the terminal but short enough to fit asserts two (one without the width comparison). Corrects a claim in the comment above `capturedGeometry` in tmux-manager.ts. Both replay paths do not address rows absolutely; the full-history one ends in a relative move, which is the whole reason the gate is right. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
Michael GrundbergandClaude Opus 5
|
3edf9aae2f |
fix(terminal): replay a pane capture at the geometry it was taken at
A visible-frame capture repaints each row at an absolute position, counting up to the pane's height. A terminal shorter than that clamps every address past its own height onto its last line. The overflow rows then overwrite one another, and the rows underneath are lost. Replaying a real 50-row capture into a 30-row terminal rendered 28 lines of a 45-line command and drew the frame twice. Nothing in the response said what height the frame was built for, so the client could not detect this. A capture now reports the geometry it was really taken at through `capturedGeometry` on `PaneCaptureOptions`, and the terminal response carries it as `captureCols` and `captureRows`. When the captured pane is taller than the terminal, or the size that produced the capture did not survive the load, `selectSession` replays once at the size that stuck. `resizeRetry` caps that at one attempt, so two competing fits cannot trade replays forever. The retry re-arms the full-history flag only when the pass that ran had consumed it. A tab switch takes the bounded tail, so its retry takes the tail too: clearing the flag unconditionally would upgrade that switch into a fresh scrollback capture the user never asked for, which the route's own comments put at tens of megabytes. What this repairs is a capture that won a race against the resize meant to precede it. It does not repair a capture whose pane was too tall because `Session.resize` declined the resize outright, which it does for a small viewport while a desktop viewport's size claim is live. The retry re-sends the same declined resize and captures the same pane, and `resizeRetry` then stops it. Repairing that means changing who owns the pane size, which is a policy question this does not touch. The reported geometry still helps there, because the client can see the mismatch at all rather than being blind to it. Follows #395, #396 and #397, which fixed the other ways the replayed frame and the terminal could disagree. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
timkjrandClaude Sonnet 5
|
358aef16e3 |
fix(run): make the Instance count stepper work for every non-Claude mode
runOpenCode(), runCodex(), runGemini(), runAntigravity(), runPi(), runOmp(), runGrok(), and runDeepSeek() all ignored the "Instance count" stepper next to the Run button and hardcoded a single quick-start call — bumping the counter to 2 or 3 while on any of these modes silently launched exactly one session, with no error. Only runClaude() ever read it. Extract the shared launch-N-sessions-and-select-the-first loop into _launchQuickStartInstances(), reused by all eight modes, and _readTabCount() for the shared clamp-and-parse. Each mode still builds its own quick-start body (config differs per CLI), just via a closure passed to the shared loop instead of a single inline fetch. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> |
||
|
Codeman maintainer
|
3cdb4bf42e |
docs(terminal): the merge-time notes promised on #436
The four edits the review said would be folded in at merge, none of them code: the changeset becomes one user-facing paragraph, since it is what CHANGELOG.md and the release notes print; the `_bufferLoadFinishOpts` comment now names the second contributor to the duplicate window (`captureActivePaneBuffer` is `execSync`, so anything painted into the pane before the server read it is in the capture and is broadcast after the reply) and says why a `history` payload keeps the pre-existing discard when its exposure is the same; the `_finishBufferLoad` doc block moves from above `_beginBufferLoad` onto the function it documents; and the test file's header describes both rules the file now pins instead of only COD-144. Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> |
||
|
Ark0N
|
492f8d8ddf |
Merge pull request #436 from irisitymichaelgrundberg/fix/replay-output-that-arrived-after-the-capture
fix(terminal): keep the output a pane capture could not contain |
||
|
Michael GrundbergandClaude Opus 5
|
3730bc7df5 |
docs(terminal): correct what selectSession does with the viewport
The JSDoc on `_syncStickyScrollBaseline` said `selectSession` deliberately ends
at the bottom, so the baseline the replay samples is already true there. It
does not. `selectSession` calls `scrollToBottom()` after the write and then
ends at `scrollToLastNonEmptyLine()` (app.js:6512), which targets
`lastNonEmptyLine - rows + 2` and therefore parks ABOVE `baseY` whenever the
replayed frame keeps trailing blank rows — which a full capture does on
purpose, since no transform that can delete a line may run over one.
Its baseline really is a stale true. What covers it is the sticky snap itself:
since
|
||
|
Michael GrundbergandClaude Opus 5
|
cfd771d1d8 |
test(terminal): pin all four buffer-load paths to the shared flush helper
The first version of this fix decided the flush policy in `selectSession`
alone, and a later pass found it still covering one path of four. Nothing in
the CI gate stops a fifth path, or an inlined `{ flushQueued: true }`, from
splitting that policy up again — the browser suite that would notice is
excluded from `npm test`.
A static scan over `selectSession`, `_onSessionNeedsRefresh`,
`_onSessionClearTerminal` and `_maybeRefetchFullHistory` asserts each one asks
`_bufferLoadFinishOpts`, reusing the `methodBody` slice the sticky-scroll guard
already needed. Verified by inlining the policy back into
`_onSessionClearTerminal`, which fails it by name.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
|
||
|
Michael GrundbergandClaude Opus 5
|
75a028e825 |
fix(terminal): re-take the sticky-scroll baseline after a replay
A capture load now replays its queued tail, and that replay runs through `batchTerminalWrite`, which samples `_wasAtBottomBeforeWrite` before it queues. It runs inside `chunkedTerminalWrite`, before that promise resolves, with the terminal freshly reset and rewritten — so the sample is always true. The caller then restored the reader's position and the next `flushPendingWrites` scrolled straight back to the bottom off the latched flag, undoing it. The only thing in the way was `_hasRecentUserScrollUp()`, a 1500ms window a server-triggered refresh is usually past. `_syncStickyScrollBaseline()` re-takes the flag from wherever the viewport now sits, and the two paths that restore a position call it right after doing so: `_onSessionNeedsRefresh` and `_maybeRefetchFullHistory`. Those are the paths #259 and #205 exist for, and they are also where a non-empty queue is most likely, since a needsRefresh fires when output is flooding. Re-taking rather than suppressing the sampling: suppressing leaves whatever stale value the flag held from before the load, which on the full-history re-pull has no reason to be false. `selectSession` and `_onSessionClearTerminal` deliberately end at the bottom, so the sampled true is already the truth there and they do not call it. `_bufferLoadFinishOpts` gains the coverage the CI gate can see: both mux sources flush, `history` does not, and a payload naming no source does not. Its only coverage was the browser suite, which CI does not run. The JSDoc and the changeset now record the one duplicate window this cutoff cannot close. The server appends output to the byte buffer in the same tick it emits, but broadcasts on a batch timer — 8ms over WebSocket, 16 to 50ms over SSE — so a batch pending when `capture-pane` ran leaves the server after the reply and is replayed although the capture holds it. It is one batch interval wide against a recovery window spanning the whole chunked write, and closing it means flushing that batch server side before the capture. The second browser test asserts its session was created, so a failed create fails it instead of passing with zero hits. docs/architecture-invariants.md no longer claims the replay leaves the queued-event discard window alone. That clause now describes what decides how a load ends, the baseline rule, the batch window, and the three covering tests. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
github-actions[bot]Claude Opus 5github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com> |
20fc7b3c3d |
chore: version packages (#447)
* chore: version packages * chore: sync the CLAUDE.md version line to 1.30.0 The changesets bot does not touch this line, and pushing it to master after merging the version PR starts a second Release run that has raced the first before. Riding the bot's own branch keeps it to one push. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> --------- Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com> Co-authored-by: Codeman maintainer <noreply@anthropic.com>codeman@1.30.0 |
||
|
Codeman maintainer
|
0e1191b774 |
chore(changeset): trim the contributor entries and add the 1.30.0 thanks
Changeset text becomes user-facing CHANGELOG, so the #429 entry is cut from five bullets of internal bash-array detail down to what the change does for someone running the installer, as promised on the PR. The #441 entry loses its em-dashes, which are not house style. Adds an entry for the maintainer fixes applied while landing #442, and the Thanks section. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
Codeman maintainer
|
bb8ada7e5f |
fix(reboot-restore): the merge-time items from the #442 review
Seven things, none of which changes what the feature does. 1. The rebuilt Session dropped `nameSource`, so the constructor re-inferred it from the name: a session the user renamed by hand to something shaped like `w<n>-<case>` came back as `placeholder`, and with auto-naming on the next prompt overwrote their name. The route persists right after, so the loss went to disk. `restoreMuxSessions()` already passes it. 2. The already-live sets were snapshotted once before a loop that awaits a real `startInteractive()` per entry, so by the tenth entry the snapshot was tens of seconds old and a conversation resumed by hand from the Resume list in that window was invisible to it: two panes on one transcript, the exact thing the check exists to prevent. Both sets are now read per iteration, and the late case is spent rather than re-offered for the same reason the batch case is. 3. Auto-resume no longer re-arms the pre-reboot `autoResumeAt` on this path. The stamp predates the reboot and the pane is new, so honouring it meant one click had every restored session type `continue` into itself about a minute later, unattended, against the route header's own promise that a restored session comes back idle and disarmed. The setting stays ENABLED, so it re-arms on the next real limit message. A Codeman restart still re-arms from the stamp, because the limit footer will not reprint on its own; the new option exists only to tell the two paths apart. 4. `discardPartiallyBuiltSession()` now also calls `recordSessionStopped()` and `ralphTracker.fullReset()`, the two teardown steps `_doCleanupSession` performs that it was missing. Cosmetic, but a run left open reads as still going in the away digest. 5. A restored claude session gets `seedAgentSessionPreamble()` like both create paths, so the agent skill's bootstrap stays a two-line loader. 6. The heuristic's container comment was wrong in one direction and quiet about the real gap: after a genuine host reboot a containerized Codeman sees the host's short uptime and the banner does appear. What it cannot see is a container-only restart, which is where this would help most. 7. The banner is hidden in a solo window, which shows one session and has no tab strip to put restored ones in. Also reverts 17 of the 18 hunks in docs/api-reference.md, which were Prettier reformatting of prose the PR does not otherwise touch (docs/ is outside the format glob), keeping only the Reboot restore section and repairing the two continuation lines that reformat de-indented; renumbers reboot-restore-ui.js to @loadorder 11.65, since 11.7 is admin-ui.js, which loads after it; and gives the feature its CLAUDE.md entry plus a route test for the multi-user workspace-forbidden branch, the only new rule that had nothing behind it. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
Codeman maintainer
|
ea5323d990 |
test(input): pin the batched commit-plus-Enter ordering #441 fixes
The unit harness proves WHICH candidate gets forwarded; the ordering is the half that shipped the bug, and only a real xterm shows it. The new browser case dispatches the character's keydown, its composed insertText and Enter's keydown in ONE page task, the shape an Android soft keyboard delivers through a single InputConnection transaction, and asserts what reaches the send path. Verified in both directions on this machine: with the drain in place the wire is `o\r`; with the drain removed (master's behaviour) it is `\r` and the character is gone entirely, because by the time the zero-delay timer runs xterm has emitted the `\r` and bumped the canonical counter past the candidate's snapshot, so the candidate stands down. The other four cases pass in both states. CLAUDE.md now names the decision point, what it costs (a keydown decides with less evidence than the timer did) and why that is safe for Enter, and says that the pin lives in a suite the CI gate does not run. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
Codeman maintainer
|
dee674d3e2 |
fix(install): point the launcher-only caveat at the thing that resolves it
The caveat #429 added ends with "see the docs above", and "the docs above" is CLI_DOCS[$i], which for DeepSeek is the upstream harness repo. Per docs/deepseek-integration.md the harness ships only the web, headless and base profiles, so following that link and running `npm install -g @deepseek-ai/dsh` leaves the reader exactly where the caveat is warning them about: a dsh that cannot drive a pane. What actually resolves it is Codeman's own Run dropdown, which offers "DeepSeek: add a terminal profile..." and installs one in a click. The new wording stays generic for any future launcherProfile entry, since Codeman is the thing being installed at all three call sites. Also flips one word in the generator: the comment said "see installCommandFor below" and that function is defined above it. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
Ark0N
|
f32c4f60d5 |
Merge pull request #442 from irisitymichaelgrundberg/feat/restore-sessions-after-reboot
feat(sessions): offer to rebuild the sessions a host reboot destroyed |
||
|
Ark0N
|
9a503872d9 |
Merge pull request #441 from shenlvkang-collab/fix/android-last-char
fix(input): deliver a recovered keystroke before the Enter that submits it |
||
|
Ark0N
|
9d7b29d899 |
Merge pull request #429 from opticon454/chore/cli-catalog-followups
chore(cli-registry): clean up dead code and stale claims left after #380 |
||
|
Ark0N
|
ff8dc92187 |
Merge pull request #424 from Ark0N/fix/terminal-history-anchor-after-parse
fix(terminal): restore the history anchor after xterm parses, not before |
||
|
Codeman maintainer
|
1f61d21298 |
docs: correct six stale counts and claims in CLAUDE.md
Each of these was measurable and wrong: the CI note listed 5 excluded Playwright tests where config/test-suites.ts has 9, never mentioned the packages/xterm-zerolag-input run that follows the gate, and never mentioned wiki-sync.yml at all; the format glob note omitted that lint covers only src/**/*.ts; app.js is ~6.9K lines, not ~6.7K, and voice-pcm-worklet.js is fetched from JS rather than sitting in the load order; src/config/ holds 23 files plus the cli-registry/ subdir, not 21, and nothing said that the repo-root config/ is a different directory; the route count is ~232 with cases at 34, not ~228 with cases at 30. Also adds the pointer to docs/wiki/ as the user-facing manual, which the header describes every other doc surface but not that one. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
Michael GrundbergandClaude Opus 5
|
62ceb4e87b |
fix(sessions): correct what the missing-pid rule actually recognises
A second real reboot disproved the mechanism the previous commit was built on. Typing `/exit` does not persist `pid: null`, and the session was restored anyway. The pid a session record carries is its `tmux attach-session` process, not the agent. `/exit` ends the CLI inside the pane, `remain-on-exit` keeps the pane, and the attach process stays alive throughout — so Codeman's PTY never exits, no exit handler runs, and the record keeps both its pid and `status: 'idle'`. The lifecycle log for the session that came back shows created, started, stale_cleaned and recovered, with no exit event at all, which is the proof: Codeman never learned the agent was gone. So nothing durable distinguishes an exited agent from a session that was idle when the power went, and this pass restores both. Ark0N/Codeman#446 is about making Codeman notice the dead pane; contrary to what the previous commit's message claimed, this genuinely does wait on that. Until a record can say the agent is gone, the user dismisses or closes those sessions. The rule itself is kept, because a record with no attach process does describe a session that never started or whose pane died outright, and refusing it is right. Only its documentation was wrong. The module header, the branch comment and the test names now say what it recognises instead of claiming the case it cannot see. Refs #411 Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
Michael GrundbergandClaude Opus 5
|
5108a24bf0 |
fix(sessions): never restore a session whose agent was already exited
Found by a real reboot, which is the first thing to catch it. Typing `/exit` ends the CLI process and leaves the session record behind, and the process-exit handler persists `pid: null` with `status: 'idle'` before anything else runs. By status alone that is indistinguishable from a session sitting idle when the power went, so the boot pass offered those sessions back and a click spawned the agents the user had deliberately closed — the exact case the eligibility rule exists to exclude. The absent pid is what tells the two apart, and the plan step now refuses a record without one, under its own `not-running` reason so the boot log says why. On a healthy board every running session carries a pid; a record with none describes an agent that is already gone. Deliberately the conservative direction. A session that somehow persisted no pid while genuinely running is not offered, and its conversation stays reachable from the Resume list, which is where every session would be without this feature. The opposite error spawns processes nobody asked for. Ark0N/Codeman#446 covers the dead panes those exits leave behind, but this does not wait on it: the rule belongs here whether or not the record's shape changes later. Refs #411 Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
Michael GrundbergandClaude Opus 5
|
5f55f9cb65 |
fix(sessions): never let the reboot-restore plan fail recovery
The plan build runs inside the try that decides whether restoreMuxSessions() succeeded, so a throw would be caught there, report restoration as failed, and block the stale cleanup and layout reconciliation that follow. An optional convenience would then break the recovery it exists to help. It is guarded on its own now: the correct way for this to fail is an offer nobody gets. Refs #411 Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
Michael GrundbergandClaude Opus 5
|
18ab2ab595 |
docs(sessions): correct what a failed rebuild is actually likely to be
Ran the feature against a real server for the first time, on an isolated instance, and two claims in the code turned out to be wrong. A rebuild that fails after the session is registered was documented as commonly caused by a CLI binary missing from a freshly booted machine's PATH. It is not: the resolver finds its binary by absolute path, so PATH never enters into it, and a server started without claude on PATH restored every session normally. Nor does an un-enterable workspace fail — tmux falls back to another directory and the pane comes up there. Neither obvious cause throws, so the discard path is defended rather than expected, and the comments now say that instead of naming a cause that cannot happen. The four review rounds that shaped this path all reasoned about a trigger none of them could test. The path itself is still worth having, since a mux failure would reach it, but its comments should not claim a likelihood the machine disagrees with. Refs #411 Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
Michael GrundbergandClaude Opus 5
|
39976041e0 |
fix(sessions): let a dismiss reach the entries a restore is holding
Fourth review of the reboot-restore branch, and the third to find a defect in the previous round's fix. This one is the same shape as its predecessor: a counter keyed on one thing, compared against a set keyed on another. The generation counter was indexed by the entry's owner, while the in-flight set holds the caller doing the restoring. Those are the same person exactly when a user restores their own sessions, which is every case the tests covered. The route deliberately supports the other case: an admin may spend another user's entries. So when an admin restored Bob's sessions and Bob dismissed the banner, nothing matched, the entries came back, and a plan Bob had explicitly dismissed was re-armed for another twenty-four hours. Rather than reconcile the two key spaces, the counter is gone. `take()` now parks the entries it hands out, remembering which caller is spending them, and they stay parked until that restore ends. A dismiss filters the parked entries by `canAccess(entry.owner)` — the same predicate it already applies to the plan — so it reaches them wherever they are. `releaseFlight()` puts back only what is still parked. Expiry and a fresh boot plan unpark everything, for the same reason. There is one key space now, the entry's owner, and the spender is only ever used to tell two concurrent flights apart. That removes `generations`, `snapshotGenerations()`, `bump()`, `bumpAll()` and the argument threaded through the route. The discard grew the teardown it still lacked. A rebuild can fail after startInteractive() resolved, and a restored workspace still carries Codeman's hooks, so the CLI can post a hook event within milliseconds; the transcript watcher that starts from it, the attachment registry, the wait registry and the approvals inbox all outlive the listeners and would meet the retry, which reuses the session id by design. Its steps also run in reverse order now, so no live listener can reach a tracker that has already stopped, and the mux kill has its own guard, because stop() kills the pane in its last block after destroying four trackers. Tests. The run-summary test named an interval and asserted a map entry, so dropping stop() left it green; it now spies on stop(). Nothing pinned that before-spawn must precede setupSessionListeners, which reads the flag that phase restores, so swapping the two lines was silent; the ordering test now includes the listener setup. The retry assertion was a tautology and now asserts a different refs object. Both strengthened tests were verified by reverting their fix. Two new tests cover the admin-restores-another-owner cases this round was about. The server in the discard test is built once and stopped, since its constructor registers handlers on module-level watchers, and the workspace is removed through safeRmHomeTree. Refs #411 Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
Michael GrundbergandClaude Opus 5
|
71ed7b127c |
fix(sessions): make the discard a real inverse of the construction
Third review of the reboot-restore branch. The narrow discard the previous commit introduced avoided everything cleanupSession() did wrongly, and in dropping so much of it also dropped four things it had to keep. The worst broke the retry the whole design rests on. setupSessionListeners() returns early while sessionListenerRefs still holds the session id, and the discard never cleared that entry. So the advertised flow — a rebuild fails because the agent binary is missing, the user fixes their PATH and clicks again — reused the same id, wired no listeners at all, and produced a tab that never showed output, never updated its status and never persisted. That is worse than the leak the discard was added to prevent. Three more registrations leaked with it: a RunSummaryTracker and its interval, an image watcher on the workspace, and the Ralph fix-plan watcher. The discard now undoes each registration setupSessionListeners() makes, in its order, and the per-session custom-model config directory, which holds the endpoint's API key literally and which nothing else would ever remove. The image-watcher flag was restored after the code that reads it, so a session came back reporting the feature as on with nothing watching. It moves to the before-spawn phase, and that phase now runs before the listeners rather than after them. The generation counter that lets a mid-restore dismiss win was global while clear() is ownership-scoped, so one user's dismiss discarded another user's unspent entries, permanently, because nothing rebuilds an in-memory plan. It is now per owner. Bumping only the owners of entries the dismiss removed was not enough either: take() has already emptied the plan by then, so a dismiss landing mid-restore saw nothing of that owner's to remove and invalidated nothing. The owners that matter are those with a restore in flight, filtered by what the dismissing user may access, and that is what clear() now bumps. Plan expiry bumps too, so a restore straddling the 24-hour boundary cannot hand entries back and give an expired plan another full day. Tests. discardPartiallyBuiltSession had no test at all: the only implementation any test ran was the mock's one-line stub, which is why every defect above was invisible. test/discard-partially-built-session.ts drives the real WebServer, and the retry assertion fails if the listener refs are left behind — verified by reverting the fix. The dismiss-race test drove the registry by hand, so deleting the route's generation argument left it green; it now goes through the route, and two further tests cover the multi-user cases. The mock context has now gone stale twice, because route tests pass it as `ctx as never` and tsconfig.json includes only src, so nothing ever compares it to the ports. A type-level guard is therefore inert — I wrote one and confirmed it never fires. test/mocks/mock-route-context-completeness.ts compares the mock's keys against WebServer.createRouteContext() at runtime instead, and names what is missing. Also: the API reference now says workspace-forbidden is judged against the owner's grant, the banner's module header no longer claims Restore always dismisses it, and the detail span gets the same min-width: 0 the phone rule already needed. Refs #411 Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
Michael GrundbergandClaude Opus 5
|
fa52753e8b |
fix(sessions): undo a failed rebuild without deleting the user's data
A second review of the previous commit found that its own repair for the session leak introduced three defects, all from reaching for cleanupSession() to undo a half-built session. That function is the user-initiated delete, not an undo. It banked the session's historical token and cost totals into the lifetime figures, and a reboot never runs cleanup, so those totals had never been counted before; every failed rebuild added them again. It saw the pin that had just been restored and demoted the record to `stopped`, which this pass reads as the durable marker of a deliberate kill, so a pinned session whose rebuild failed became permanently unrestorable. And it recursively removed `.claude-images` from the working directory, which belongs to the workspace rather than to the session, so a failed rebuild destroyed the pasted images of any other live session in that repo. discardPartiallyBuiltSession() now undoes only what the construction did: the map entry, the tab-layout slot, the listeners and any pane the launch created before throwing. The persisted record, the lifetime totals, the Ralph state and the workspace's files are left alone. Re-applying the persisted state also splits in two, which removes the first two defects at the root rather than only at the call site. The half that shapes the pane, the custom-model environment and the nice priority, still runs before the spawn. The half that is the session's own history now runs after it, so a session whose pane never started carries no totals and no pin for anything downstream to misread. The rest of that review. The multi-user workspace confinement re-check read the requesting user's grant, and returns true for an admin, so the case its own comment described was the one it missed; it now resolves the entry owner's grant through isWorkingDirAllowedForUsername, the way cron does. A forbidden workspace goes back on offer, matching both the registry's stated contract and the API reference. The client re-reads the plan after a restore instead of blanking the banner, so entries the server put back stay reachable, and a 409 now says a restore is already running rather than reporting a failure. A dismiss arriving mid-restore wins, through a generation counter the route carries across its take. The re-application also restores the tab colour, the image-watcher flag and the original pinnedAt, via a new Session.restorePin that does not re-stamp the pin time. The phone breakpoint gains min-width: 0, without which a nowrap flex item never shrinks and the buttons still overflow, and it folds into the existing phone block. Ralph's loop configuration still does not survive a restore, because toState() reads it off a live tracker and there is no way to keep it without arming the loop. The method now says so rather than leaving it implied. Tests. The capacity test could not fail on the property it existed for: it filled the board past the cap before the loop, so a single pre-loop check would have passed it. It now leaves one seat, so only a per-iteration check restores exactly one entry. New tests cover the ordering around the spawn, a throw before the loop returning the whole plan and releasing the flight, the dismiss-during-restore race, and that the failure path calls the narrow discard rather than the delete. The shared mock context gains the port method it was missing, which is what made the first run of these tests fail for the wrong reason. Refs #411 Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
Michael GrundbergandClaude Opus 5
|
fbede5cd2a |
fix(sessions): act on the dual review of the reboot-restore route
Fifteen findings from two independent reviews of #442, three of them blocking. Every one is addressed here. The three blockers all sat in the restore route. A rebuild that threw after addSession left a registered session with no pane behind it, visible on the board, holding a layout slot and written to state.json, with its plan entry already spent; the catch now cleans the session up and puts the entry back. The loop checked neither the global nor the per-user session cap, so one click could take a board past a documented limit; capacity is now re-checked per iteration, because the loop is itself creating the sessions it counts. Worst of the three, a rebuilt session carried none of the state its constructor has no parameter for and then persisted itself over the record that held it, zeroing token and cost totals and dropping the pin. The pin matters most: pruning keeps a record only while it is pinned, so discarding it handed the record to the next stale sweep. A new reapplyPersistedSessionState() on the session port restores the pin, the token totals, auto-compact, auto-clear, auto-resume, nice priority, the flicker filter and the custom-model selection, and it runs before both startInteractive and the first persist. The rest, in the order they bite a user. Every rebuild failure was reported as workspace-missing, so the banner told users their repo was gone when the agent had simply failed to start; there are now distinct reasons, and the toast names each one. The client read restored and skipped off the outer response object rather than through the uniform envelope, so every count came back zero and neither toast ever fired. A board left open across the reboot never learned an offer existed, because the banner was seeded only on the page-load path; it now re-reads on every SSE init. The workspace check was existence-only, skipping the multi-user confinement that the create route applies, so a withdrawn grant would not be noticed. The banner had no phone breakpoint while its text was nowrap and its buttons could not shrink. Smaller: a missing workspace is now re-offered rather than dropped, while an already-open conversation is dropped rather than re-offered forever; a throw anywhere in the route returns the unspent entries instead of discarding the plan; the single flight is keyed by owner, since take() already stops two callers receiving one entry; the env clamp's header no longer claims a protection it cannot provide on this path today, and names the check that does bite; the three endpoints are documented in docs/api-reference.md; and the module header now says that os.uptime() reads the host's clock, so the feature is effectively off inside a container. The review also explained why the tests missed all of this: they proved the construction claim through their own copy of the construction rather than through the route, and the route tests used workspaces that did not exist, so no Session was ever built. test/routes/reboot-restore-rebuild-failure.ts mocks the Session module to drive the route's real path, and covers the cleanup, the reason reported, the re-application ordering, the broadcast and the caps. The mock route context gains the port method and the mux call the route needs. Refs #411 Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
Michael GrundbergandClaude Opus 5
|
da933d70be |
feat(sessions): offer to rebuild the sessions a host reboot destroyed
A host reboot takes the tmux server down with it, so every pane dies, reconciliation finds nothing to attach to, and the board comes up empty. Picking yesterday's work back up meant finding each conversation in history and resuming it by hand, one at a time. The boot pass now works out what the reboot killed and leaves it on offer. It runs inside restoreMuxSessions(), in the window where reconciliation has reported the dead sessions and cleanupStaleSessions() has not pruned their records yet, which is the only place the records can still be read. The board shows a banner, and nothing is created until the user clicks it. A click rather than an automatic restore is what makes the reboot heuristic acceptable. The heuristic cannot tell a reboot from a crash that took tmux down inside the same window, so it decides whether to ASK, never whether to act: a wrong yes costs a line of text the user dismisses instead of N CLI processes nobody asked for. Four things are re-checked when the click arrives rather than trusted from boot, because hours can pass and the board moves on. The owner's privilege grant re-resolves through the env clamp. The workspace must still be on disk. A conversation the user already resumed by hand from the Resume list is skipped, since two panes running --resume on one conversation would fight over the same transcript. Entries leave the plan synchronously before the first await, and the route is single-flighted, so a double-click or two devices cannot both reach the same entry. A restored session comes back attached, idle and disarmed. Respawn controllers and Ralph loops are deliberately not re-armed: a machine that just came up is the worst moment to turn an autonomous run loose. Its workspace hooks are installed by the restore route itself, because the boot-time sweep sits behind a gate that is false after a reboot and has finished long before the click; without them a session goes silently blind, with no stop or idle events for respawn, no Approvals Inbox item and no red tab on a blocking dialog. Stats collection starts the same way. The pane is new, so the conversation continues and the terminal scrollback does not. The banner says so rather than letting an empty pane read as a broken restore. The plan lives in memory only. A server restart drops it, which costs the convenience this adds and never the conversation: the conversation is the transcript under ~/.claude/projects, which the Welcome screen's Resume list and the Session Manager already read, so a dropped plan returns the user to resuming by hand. clampEnvOverridesForOwner moves to src/session-env-clamp.ts, since the question it answers is about session privilege rather than about HTTP and it now has a caller outside the route layer. Its test hook stays re-exported from session-routes.ts. Claude sessions only for this pass. The other CLIs name their thread in their own config object, which this does not thread through yet. Remote and docker sessions are skipped on purpose, because both need another host or a container to be up and a freshly booted machine cannot promise either. Refs #411 Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
codeman-localandClaude Opus 5
|
a1c35da0d8 |
fix(input): deliver a recovered keystroke before the Enter that submits it
Every message typed on an Android phone lost its last character. An Android soft keyboard commits the last typed character and sends the Enter key in ONE InputConnection transaction, so the committed-text `input` event and the Enter keydown are both processed before any zero-delay timer runs. The orphaned-input recovery from #388 resolved its candidate only on such a timer, and that lost the character twice over: * ORDER — xterm emits `\r` synchronously from the Enter keydown, and the local-echo composer submits `pendingText` right there. The recovered character arrived one macrotask too late to be part of the prompt. * LOSS — that same `\r` bumps the canonical counter, so by the time the candidate resolved, `canonicalCount > snapshot` read as "xterm spoke for this keystroke" and stood the recovery down. The character was not merely late, it was dropped. Drain pending candidates synchronously at the next keydown instead, from xterm's custom key handler, which runs before xterm processes that key. The counter then still holds the value it had while the candidate's own keystroke was current, so the stand-down decision is made against the right keystroke, and the recovered byte reaches the composer ahead of whatever the new key emits. The timer stays as the fallback for a keystroke with no key after it. Physical keyboards are unaffected: there the timer has already resolved the candidate long before the next key arrives. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
Codeman maintainer
|
bd286bf502 |
docs(wiki): catch the manual up to 1.29.0 and add the three run modes it never had
The wiki was written for seven run modes and never received Grok Build, DeepSeek Harness or OMP. They now appear everywhere the others do: the modes table and per-CLI notes, install commands, environment prefixes, the Quick Start table, the requirements rows, the vocabulary, and every "seven modes" count. The 1.27 to 1.29.0 changes land on the pages that own them: attaching a case to an existing container, multi-case adoption and the copy-a-case picker (Docker Cases); file reads over ssh in remote cases and what stays unavailable (Remote SSH Sessions, Working With Files, Security); single-page app routing, frame recovery, localhost links as tabs and the egress guard (Web Tabs); DeepSeek as the one non-Claude mode with real stop/blocked signals and Approvals items, Codex's own work detection, last-response, the model-endpoint routes and refreshed counts (HTTP API, Driving From An Agent, Hooks, Notifications, Keeping Agents Running, Core Concepts); Shift+drag, right-click copy, Auto Copy, the Ctrl+Z guard, font weight, the vertical rail and its activity sort (Keyboard Shortcuts, Input And Voice, The Dashboard, Settings Reference); the 600px phone cutoff, Codex shift arrows and iPhone Duo (Mobile Guide); the Docker Compose route and its update rule (Installation, Running As A Service); four new symptom entries and a "which CLIs" question (Troubleshooting, FAQ). Custom model endpoints are deliberately left to #430, which adds that page and edits Agent CLIs, Settings Reference and the sidebar; these edits stay out of the regions #430, #428 and #376 touch, and all three still merge cleanly on top. Both READMEs: the web-tab menu entry is labelled "Add URL" in the UI, not "Add dashboard". Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> |
||
|
github-actions[bot]Claude Fable 5.1github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com> |
3248f35081 |
chore: version packages (#437)
* chore: version packages * chore: sync the CLAUDE.md version line to 1.29.1 Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> --------- Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com> Co-authored-by: Codeman maintainer <noreply@anthropic.com>codeman@1.29.1 |
||
|
Michael GrundbergandClaude Opus 5
|
c9515b1d4c |
fix(terminal): keep the output a pane capture could not contain
Live terminal events are queued while a buffer load runs, and the load discards that queue when it ends. That is right when the loaded buffer is the server's accumulated byte history. The route appends to that history right up to the moment it serializes the response, so a queued event already appears in it and replaying it would duplicate output, most visibly Ink's cursor-up redraws. A tmux pane capture is a photograph, current only as of the instant `capture-pane` ran. Output printed afterwards was queued and then dropped, and nothing scheduled a re-fetch to recover it: `_onSessionNeedsRefresh` is wired only to the 128KB overflow path. The CLI's next partial redraw then landed on a frame the terminal never received. How much went missing depended on which capture the route served. A `?full=1` load returns the capture alone, with no history in front of it, so it lost everything from the capture to the end of the chunked write. A `?tail=` load returns history, a clear, and then the capture, and the route reads that history after the capture, so it lost everything from the response to the end of that write. The chunked write dominates either way. An agent CLI hides the loss on its next full redraw; a shell session does not, because its output is linear and nothing repaints it. Queue entries now carry their arrival time, and `_finishBufferLoad` takes a `since` cutoff, so a capture load replays exactly the tail that arrived after the response headers. The earlier events stay dropped, because a payload that carries history does hold those. All four paths that fetch a terminal buffer and write it now decide this the same way, through one `_bufferLoadFinishOpts` helper, so they cannot drift apart: `selectSession`, `_onSessionNeedsRefresh`, `_onSessionClearTerminal` and `_maybeRefetchFullHistory`. The second of those is the one that stings. It exists to restore output the client already dropped once under backpressure, and it was dropping more output while performing that recovery. The cache-hit write inside `selectSession` stays on discard deliberately: it runs before the fetch, so its queue holds only events the capture that follows already contains. Two further things had to change for that tail to still exist when the load ends, and a browser test is what found both. `chunkedTerminalWrite` is what ends the load for every non-empty buffer, so the flush policy travels to its own finish calls; the call in `selectSession` runs only when the write was skipped. `_beginBufferLoad` no longer empties the queue when one load re-enters it, which it does on every write, because that reset discarded the whole fetch window before anything could replay it. The response already distinguishes the sources. `source` reads `mux-visible` or `mux-full-history` for a capture and `history` for the byte stream. Follows #395, #396 and #397, which fixed the ways the replayed frame itself could disagree with the terminal. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
Codeman maintainer
|
5b920cb43d |
feat(sessions): land auto-naming opt-in, in the prefix form, from the first user prompt only
Finishes #376. The contributed keystroke tracker sat on the raw byte stream and named tabs wrong five ways (every prompt, every write path, a bare Esc eating the next prompt's first character, pasted newlines as Enter, any CSI clearing the draft) and replaced the whole name, which dropped the case from the tab and reset the w<n> counter. This lands the feature with each of those closed: - First prompt means the first: applyAutoName() flips a placeholder to `auto` whether or not the string changed. nameSource is now the tri-state placeholder | auto | manual; the name setter is the only manual path. - Only user-originated input counts: write()/writeViaMux() take SessionWriteOptions.fromUser, set by the browser WS path and POST /input only, so Ralph, respawn, cron, approvals and the trust-dialog keys can never name a tab. A startMode 'shell' CLI never feeds the tracker (a capability, not an id check); the send-key route feeds trackUserInput() because its line feed bypasses the session. - Prefix form `w3-case: title`: parseSessionPrefix() already renders it as the title with the prefix in the tooltip and the next-session counter still matches it. Composed within MAX_SESSION_NAME_LENGTH. - Tracker rules per key: bare Esc resolves at chunk end; mouse/focus reports, Tab, cursor keys, Shift+Tab are no-ops; Up/Down and Ctrl+P/N/R taint the draft so Enter submits nothing rather than a fragment; bracketed-paste newlines and Ctrl+J / Shift+Enter join with one space; the draft keeps its head past 8192 code points; an escape past 64 bytes is abandoned. - Title: slash commands by shape (a path is a prompt), `!` escapes refused, first sentence only past 8 code points ("e.g." is not a title), 72 code points on a word boundary. - Synced `autoNameSessions` setting, default OFF (the prompt reaches mux-sessions.json, session:updated and /api/search), App Settings -> Appearance -> Tabs, read fresh per prompt after the eligibility check. Tests: test/session-auto-name.test.ts (tracker, title, composition, ownership, emit gating), the wiring test (once, prefix, setting off, manual protected), test/routes/session-name-routes.test.ts (PUT /name flips to manual and persists). Verified live on an isolated instance: API and browser-typed prompts name the tab, a second prompt does not, shells and renamed tabs are untouched, nameSource survives a restart. Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> |
||
|
Codeman maintainer
|
c4322513d9 | Merge pull request #376 from shenlvkang-collab/feat/auto-session-names-upstream | ||
|
DevvynandClaude Sonnet 5
|
3f2928ae73 |
chore(cli-registry): clean up dead code and stale claims left after #380
Addresses the "left as they are"/"worth knowing" items Ark0N named when merging #380 (the CLI-catalogue-driven install.sh + Docker agent image PR), none of which were correctness-blocking but all of which were real: - Removed install.sh's dead _cli_index/check_cli/get_cli_path helpers: the catalogue-driven menu and hints stopped calling them and nothing else ever did. - The generator no longer emits CLI_KIND/CLI_NPM, two bash arrays install.sh never read (the .mjs/docker-hosts.ts producers already read the JSON catalogue's kind/npmPackage fields directly, so only the bash copies were dead). - detect_all_clis now skips a disabled entry's probe entirely instead of running it and filtering the result downstream. No stock entry ships disabled today, so this closes a latent inefficiency before it is a latent bug rather than fixing an observed one. - The install hint for a launcherProfile entry (DeepSeek today) now explains in one line why it's a docs link and not a command: its own docs page documents `npm install -g @deepseek-ai/dsh`, which installs the launcher only and can't drive a pane, the exact trap the menu already avoids by withholding the command. Driven by a new generated CLI_LAUNCHER_ONLY array (from discovery.launcherProfile), not an id check, so any future launcherProfile entry gets the same caveat free. - Corrected the non-interactive-default comment: on a wget-only host, Claude's curl one-liner is filtered out of the offered list first, so the default becomes whichever npm-based entry sorts earliest instead (Codex today), not always Claude. Behaviour is unchanged — it was already printed, never silent — only the comment overclaimed. Tests: extended test/install-sh-invariants.test.ts with a positive guard for the new array and the trimmed array list, a negative guard that CLI_KIND/CLI_NPM/the three dead helpers cannot come back, and two real-bash tests (driven the same way the existing skip-menu tests are) proving a disabled entry is genuinely never probed rather than merely filtered after the fact. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_011WzDjJnbK7zug8iQWnCc9z |
||
|
Codeman maintainer
|
018f0c4160 |
docs(readme): catch both READMEs up to 1.29.0 and repair three merge-damaged lines
DeepSeek Harness joins every CLI list it was missing from (tagline, intro, run-mode table, Multi-CLI bullet with its env prefixes, security allowlist, architecture diagram), and the 1.27 to 1.29.0 features get their bullets: custom model endpoints (HTTP API only, with the verified and gapped CLIs named), web tabs, attaching a case to an existing container, remote SSH file access, the plan-usage chip, the sidebar and activity-sorted rail, font weight, skins and entrance animations, Approvals Inbox, Read My Mind, Claude-login voice dictation, Shift+drag select and right-click copy. The agent guide's rule 7 now counts deepseek among the hook-signalling modes and the recipes read answers through last-response first; the API section carries the new routes and current counts; the download cap reads 2 GB instead of the retired 50 MB; the zerolag package test count is the measured 238. The English file had three spots where the OMP merge of 2026-08-18 left two copies of a line joined without a newline (the Docker credentials bullet, rule 7 of the agent guide, the CLI node of the mermaid diagram). All three are single lines again. The Chinese file was further behind: besides the above it had never received the daemon and service block, the Tailscale install option, the Compose paragraph, the Tab Alerts section, the codeman tui section, the agent-skill walkthrough, the Community section or the closing star paragraph. Those are translated in, so both files now share one section structure. Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> |
||
|
Codeman maintainer
|
de864e7d63 |
fix(terminal): restore the history anchor after xterm parses, not before
flushPendingWrites() captured the viewport of a user who was reading scrollback, called terminal.write(), and restored the anchor on the next line. xterm parses on its own schedule, so at that point the buffer has not moved: the guard `viewportY !== preserveViewportY` was false, scrollToLine was never called at all, and the Codex redraw landed a tick later and took the viewport to the live bottom with nothing left to pull it back. Scrolling up during a stream still got dragged down, which is what #358 reports, and a refresh was the only way back to a coherent view. The restore moves inside xterm's write callback, the first moment the redraw's effect exists, and runs before _scheduleTerminalWriteFlush() so a deferred remainder re-captures the restored anchor rather than the bottom. Two things follow from it running later: - A live anchor now wins over the sticky scroll-to-bottom. The two are captured at different moments (_wasAtBottomBeforeWrite at the frame's first batchTerminalWrite, the anchor at flush time), so a scroll-up in between leaves both set, and running both would jump to the bottom and come back a frame later instead of staying put. - The anchor is dropped if the active session changed or a buffer load started while the write was in flight. It indexes the buffer it was captured from, and selectSession() resets the terminal and chunk-loads a different scrollback. The existing regression passed throughout, because its write mock moved the viewport synchronously, which real xterm never does. The harness now models an asynchronous parse (redraw lands, then the callback fires), and all five of the anchor tests fail against the old code. Fixes #358 Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
Codeman maintainer
|
88e3faa456 | chore: version packages codeman@1.29.0 | ||
|
Codeman maintainer
|
70fc6b32d5 |
docs: record the dup/last input ACK, Shift+drag and right-click copy, and multi-case adopted containers
Three behaviours landed from #375 without their doc entries: the duplicate input ACK now carries `dup:true` and the server's watermark (`docs/reliable-input-delivery.md` still described a bare ACK), Shift+drag and right-click copy in the terminal (the shortcut list did not know them), and one adopted container backing several cases at different in-container directories (the Docker cases paragraph still implied one case per container for adopted containers too). Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> |
||
|
Codeman maintainer
|
9591b973cf |
fix(docker): carry the owned flag on the wire the way master already does
The cherry-picked "copy an existing case" commit declared a second `CaseInfo.docker.owned` and emitted `owned: true|false` on every docker case, while master had meanwhile shipped the same field from the adopted-container work with a narrower wire shape: `owned` is present only when false, absent means owned. Two declarations failed typecheck, and two emit styles on one response would have made the picker's answer depend on which read path filled it. Keep master's shape at both response sites (the case list and the single-case lookup, which lacked the field entirely), fold the picker's reason for the field into the existing doc comment, and repoint the test that pinned "set on exactly two sites" at the surviving form, adding a negative pin so the duplicate style cannot come back. Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> |
||
|
d fei
|
025f061383 |
fix(docker): pre-fill the copied case instead of blanking two fields
The previous version cleared the case name and the in-container directory on the
grounds that they must differ. That left a form with three fields mysteriously
filled and two empty, and turned the most common operation — changing
/srv/app/api to /srv/app/web — into retyping a long path.
Both are now pre-filled, with focus on the in-container directory and the caret
at the end, since the tail is what changes. What stops an unmodified submit is no
longer an empty field but a guard: the values applied are recorded, compared at
submit time, and if nothing changed the reason is stated next to the field and
focus moves to it, without sending a request that is certain to be refused.
The server refuses these anyway (a duplicate case name, a twin case on the same
container and directory) and its errors are clear; but making a round trip to be
told "you forgot to edit the field you are looking at" is worse than saying so on
the spot. The guard only applies when a source case was actually selected, so
filling the adopt form from scratch is unaffected.
⚠️ The status text is written into dockerLinkStatus. My first version referenced
an id that does not exist (dockerAdoptStatus), which made the explanation vanish
silently and left only a toast. The test now extracts that id from the code and
looks it up in index.html, pinning that it must really exist.
(cherry picked from commit
|
||
|
d fei
|
7a5543da09 |
feat(docker): add "copy an existing case" to the adopt panel
The backend already lets one adopted container back several cases pointing at
different in-container directories, but using it meant retyping the container
name, host and workspace one by one — exactly the friction that leaves a
capability unused. Picking an existing case from a dropdown now carries those
three over, leaving only the two fields that must differ: the case name and the
in-container directory.
Clearing those two is the point of the feature, not a convenience: keeping the
old name is refused by the server as "case already exists", and keeping the old
directory is refused as "a twin case on the same container and directory". Both
errors are clear, but a form pre-filled with values that are guaranteed to be
rejected is a trap. Focus lands on the in-container directory — the thing the
user came here to change.
⚠️ Only adopted containers are listed (docker.owned === false). A Codeman-built
container's lifecycle belongs to its one case — a second case would be torn out
by that case's recreate or delete — so the server refuses it anyway, and listing
it here would only manufacture a baffling error. `owned` may be absent and absent
means owned, so the test is `!== false`, not truthiness.
CaseInfo.docker gains containerWorkdir and owned for this: the former is the
"which directory does this case use" half of the picker, without which the user
cannot tell what to change it to; the latter backs the filter above. ⚠️ Both
places that build a docker CaseInfo (the list endpoint and the single-case query)
must set them — filling in only one makes the picker work or not depending on
which read path was taken, and a test pins "exactly two".
(cherry picked from commit
|
||
|
d fei
|
cbb7f635ff |
feat(docker): let one adopted container back several cases in different dirs
Once a container is adopted, it could not be adopted a second time. But a
container usually holds more than one project directory, and opening a case for
another one had no path forward except starting a second container — precisely
what adoption exists to avoid.
The original reason was in a comment: two cases sharing an adopted container
would make one case's teardown race the other's launch on the same tmux server.
That reason does not hold. The in-container tmux session name is
dockerTmuxSessionName(sessionId), i.e. codeman-dkr-<id8>, keyed by SESSION and
not by case, and buildDockerKillCommand tears down exactly that name, so killing
A never touches B — hosting multiple sessions is what a tmux server is for.
The other three routes into an adopted container's lifecycle do not pass through
here either, confirmed one by one: the stop and remove builders throw outright;
recreate refuses `owned === false` before it even resolves the container name;
and orphan reaping filters on `label=codeman.managed=1`, which a user-built
container does not carry — a structural exclusion.
That leaves exactly three cases worth refusing, none of them tmux-related, split
into the pure, unit-tested classifyAdoptContainerConflict:
- owned-case the container belongs to a Codeman-created case, whose lifecycle
Codeman manages: one recreate or delete there would pull the
container out from under the adopting case.
⚠️ `owned` may be absent and absent means owned (cases predate
the field), so the test is `!== false`, not truthiness.
- other-owner already adopted by a different user. Adoption hands out a shell
inside someone else's container.
- duplicate same container, same directory. The second case would behave
identically to the first, so name the existing one rather than
silently minting a twin. A different in-container directory is
the case this change exists to support and passes.
(cherry picked from commit
|
||
|
d fei
|
e5684d0bba |
fix(ui): don't create a compositing layer for a hidden full-screen overlay
`backdrop-filter` promotes an element to its own compositing layer. A
position:fixed full-screen layer that is created and then hidden was measured to
leave a stale hit-test region behind in Chrome: the page renders perfectly, but
pointer events across the viewport go nowhere.
The report came from a long-lived tab connected to a remote server, where a
connection blip shows and then hides #offlineOverlay. The symptoms were a
terminal that would not scroll and, at the same time, an unrelated
click-to-expand that also stopped responding, while a freshly opened tab was
fine; a read-only console command (getComputedStyle + elementFromPoint, both of
which force a hit-test recomputation) then cured it. Two unrelated features
dying together and one read-only command fixing both points at hit-testing
itself rather than at either feature.
So the `backdrop-filter` moves onto the actually-visible selector and the layer
is never created while hidden. Only the two persistent overlays change:
offline-overlay (toggled with [hidden]) and file-preview-overlay (toggled with
.visible). path-picker and path-preview are created and removed by JS, leave
nothing behind, and are untouched.
⚠️ This is an evidence-based inference, not a fix verified by reproduction:
reproducing it needs a long-lived page that has been through a connection blip,
which I could not manufacture in a controlled environment. The guard test pins
both halves — no such property while hidden, and a real blur while shown — so a
later cleanup cannot quietly delete the effect.
(cherry picked from commit
|
||
|
d fei
|
c7cc8e28d5 |
fix(sse): stop reloading the whole terminal when a reconnect lands on the same session
handleInit() did not distinguish a first load from an SSE reconnect: it always
cleared the terminal caches in _resetAllAppState() and re-ran selectSession() for
the session that was already on screen. Every reconnect therefore refetched up to
1 MiB of buffer and reset+rewrote xterm. On a link that drops a connection about
once a minute (measured at ~57s intervals against a healthy server) that reads as
the page refreshing itself and throwing away your reading position.
A reconnect that lands back on the still-open session now keeps the terminal
caches and activeSessionId and resyncs through _onSessionNeedsRefresh(). That
path still reloads the buffer, so output produced during the outage is not lost,
but it preserves distance-from-bottom — the same rule #259 established for a
refresh the server triggered rather than the user. The WS is reconnected
explicitly when it is not already on that session, since skipping selectSession()
skips its _connectWs() call.
First load (gen === 1) takes exactly the path it took before.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Rv24Pk4qzrsDYdVyDyJQmT
(cherry picked from commit
|
||
|
d fei
|
01da577053 |
fix(input): recover when the seq counter falls behind the server watermark
Browser input is delivered exactly once by (clientId, seq). The server records a
watermark per clientId and discards anything not above it as a duplicate — but
acknowledged it with an ACK indistinguishable from "applied". The client then
dropped the record from its queue, the UI looked perfectly normal, and the
terminal received nothing at all.
The counter is persisted to localStorage through a debounced write. Kill the page
between "sent" and "persisted" and the restored counter is below the server's
watermark, after which every keystroke lands under it, is discarded, and is
ACKed. Reloading does not help: the clientId is restored from localStorage
alongside that stale counter. Measured on a real session — typing into the same
session from a fresh browser (new clientId, no watermark on the server) worked
perfectly, which is what localised the fault to client state.
Three changes:
- on rejection the server replies {"t":"ia",seq,"dup":true,"last":<watermark>}.
It still ACKs, so the client can drop the record from its queue, but it now
says the input was not applied and supplies the number needed to climb out.
- on `dup` the client lifts its counter above the watermark and re-queues.
⚠️ Only records whose FIRST delivery is being retried are re-sent: a retry
judged duplicate means the mechanism is working (the original did arrive), and
re-sending would type the same text twice.
- the counter is now persisted synchronously. The queue payload can stay
debounced, but the counter is the thing that has to survive a crash, and
leaving it on the lossiest path cancels the only guarantee there is.
⚠️ Reading the watermark is defensive: the session arrives through a structured
port, and a port missing that method must not take the whole input path down —
a throw inside the handler means the ACK is never sent and the record is stuck in
the client queue forever, which is worse than the ambiguity being fixed. A mock
port's test timeout is what exposed this.
(cherry picked from commit
|