The phone case picker had no way to narrow a long case list, so finding
one meant scrolling a sheet that showed about six rows at a time.
- A search field filters rows by name (every typed word must match, any
order, case-insensitive), with a "No matching cases" state. Enter picks
the case when exactly one row is left; Escape clears, then closes.
- The field is not auto-focused, so opening the picker does not raise the
keyboard. The list holds its unfiltered height while searching so the
sheet does not jump, and the input is 16px so iOS Safari does not zoom.
- Layout: the sheet padded the home-indicator inset on top of the footer
already doing so, leaving a dead band under Create New Case; the sheet
now grows to 80dvh and the list fills it instead of a separate 50vh cap.
- Opening scrolls the list (its own box, not scrollIntoView) to the
currently selected case.
Co-authored-by: Codeman maintainer <noreply@anthropic.com>
* fix(cleanup): keep .claude-images while a sibling session uses the same dir
cleanupSession() recursively removes {workingDir}/.claude-images. That
directory belongs to the working directory rather than to the session, and
several sessions routinely share one case directory, so closing one session
deleted the pasted images a live sibling still referred to.
The removal now runs only when no other live session has the same working
directory. A session that is itself being cleaned up does not count as live,
so two sessions of one case closed together still remove the dir.
Split out ahead of the exited-agent sweep for Ark0N/Codeman#446, which closes
sessions unattended and would otherwise make the loss routine.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* feat(session): close sessions whose agent exited cleanly (#446)
Part 2 of Ark0N/Codeman#446. Part 1 records an exited agent as
SessionState.paneExit. A session whose agent the user ended with /exit is
now closed through cleanupSession(), the same path the X button takes, so
finished sessions stop piling up on the board. The lifecycle log records
the reason as "agent exited cleanly (status 0)", and the conversation stays
resumable from the Resume list.
shouldCloseCleanlyExitedSession() in the new pure module pane-exit-sweep.ts
holds the rule. It closes a session only when all of these hold:
- The exit status is an explicit numeric 0 with no signal. An absent status
is how a SIGKILL presents on tmux 3.2a, so it counts as unknown and the
row stays. A non-zero status or any signal also keeps the row, with the
exit code on the tab.
- Two authoritative pane reads agreed on that exit.
TmuxManager.getPaneExitReadCount() counts them, and a failed, empty or
skipped read neither confirms nor resets the count.
- No start, attach or relaunch is running for the pane.
Session.paneLifecycleInFlight covers _setupOrAttachMuxSession(), whose
dead-pane branch revives an exited pane on purpose, and restartCli().
setPaneExit() already scopes paneExit to local mux-backed sessions, so
remote, docker and direct-PTY sessions are never closed.
planRebootRestore() now refuses a record whose persisted paneExit is a
clean exit. That covers an agent that exited just before a reboot, before
the sweep reached it. A crashed agent's record stays eligible, like its row.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* fix(web): show "exited" on the phone overview and desktop home rail (#446)
Part 1 of Ark0N/Codeman#446 taught the tab strip and the rich rail rows
to say that a session's agent has exited. The phone overview and the
desktop home rail still said "idle", beside a green or pulsing dot.
_mobileOverviewExit() in mobile-overview.js is now the one rule for all
three surfaces, and _sidebarRichRow() uses it as well. It changes what a
row shows and leaves the row's state alone, because the state still picks
the section and the sort order. An exited row gets an "exited" pill, a
neutral dot and row accent, and a duration measured from when the server
first saw the pane dead. A pending permission prompt or question still
wins, as it does on the tab.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* fix(cleanup): close the gaps review found in the #446 sweep and image guard
Four fixes from a dual review of Ark0N/Codeman#446 part 2.
- The .claude-images guard compares canonical paths, so a sibling that
reaches the same directory through a symlink keeps it. Its comment used to
say that case only missed a deletion; it caused one.
- A detached session counts as a live sibling. DELETE ?killMux=false removes
it from the server's map while its pane keeps running, so the guard now
reads persisted records too, and exempts only sessions being killed rather
than every session in cleaningUp.
- A session being closed refuses startInteractive() and startShell(). The
/interactive route awaits listener setup before the start, and a start
that raced the close could launch a CLI in a tmux session whose record was
then deleted. A failed close clears the mark again.
- The clean-exit sweep tries each exit once, keyed by session id and the
exit's at stamp, so a close that fails is not retried and logged every
two seconds.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* fix(session): keep a clean exit that lands within 10 s of a pane start (#446)
A CLI that prints a startup error ("not logged in", a bad profile, a config
error) and exits 0 used to lose its tab, and the error with it, about 4 s
after launch. The sweep now keeps any clean exit that lands within
CLEAN_EXIT_MIN_PANE_LIFETIME_MS (10 s) of the last start, attach or relaunch
finishing (Session.paneStartedAt, stamped when _withPaneLifecycle ends). The
row stays as "exited (0)" for the user to read and close.
Verified on an isolated instance: a shell that ran `exit 0` 2 s after start
kept its row, one that exited after 13 s was closed.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- mobile.css: gemini and antigravity run/gear rules get `!important` like
pi/omp/grok/deepseek, so the gear half no longer keeps the skin accent
while the body takes the mode colour (two-tone button on the default skin).
- test/skin-themes.test.ts: static guard that every run mode with a base
`.btn-toolbar.btn-run.mode-<id>` rule also has a resting rule inside the
`html:not([data-skin="og"])` block; ids are derived from the stylesheet.
- stock.ts: grok's accent comment names zinc-300 (border/badge colour);
gemini's accent is #8ab4f8 to match its tab badge and run-mode dot, noted
as the one exception to the border-colour method.
- types.ts: "(below)" -> "(above)".
- docs/cli-registry.md, CLAUDE.md: `accent` is now measured, not transcribed.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Ten findings from a two-model review of this branch. Both reviewers cleared the
detection logic itself; everything here is a gap around it.
A route that starts a command in a pane now PERSISTS as well as broadcasts.
`/interactive` and `/shell` did neither before, and the pane-exit watcher cannot
cover for them: its next tick finds `paneExit` already cleared in memory,
reports no change and writes nothing, so `state.json` kept saying the agent had
exited for as long as the session stayed quiet. Nothing reads that record for a
decision yet, which is exactly why it had to be fixed now — part 2 is designed
to read it. The `clearPaneExitForNewPane()` docstring claimed its callers
already persisted; that claim was false for these two, and now says what the
caller owes instead.
The watcher's four guards were unreachable by any test. `refreshPaneExits()`
opened with `if (IS_TEST_MODE) return;`, so the read gate, the in-flight
suppression, the generation counter and the empty-read rule could each be
deleted with the whole suite green. The tmux call moves into `readPaneRows()`,
which a test subclass overrides — the shape `runRemoteReconnectTick` already
uses in this file for the same reason — and the test-mode gate moves with it, so
what a test cannot do is spawn a process rather than exercise the bookkeeping.
Each of the four guards now has a test that fails when it is deleted.
The muted status dot turned out to be a specificity fight on three surfaces, not
two. `.tab-status.error` was not excluded, so a session whose agent exited and
whose PTY-exit breaker then tripped lost its red dot to the mute — the state the
browser answers with a "restart it?" confirm, and a needs-you colour by the same
argument that protects the two alert classes. And mobile.css gives a `busy` dot
a 9px size and a green glow with `!important`, while `status` stays `busy` for a
pane whose agent died mid-turn, so a phone rendered a grey dot still wearing the
green halo beside a badge reading "exited". Both measured against the real
stylesheets, both now excluded, and the CSS test reads mobile.css too instead of
being structurally blind to half the problem.
Six comments said things that were not true. Two named the stats collector as
what replaces a restored reading, which is the opposite of the design. The
interval constant argued that 2000 ms keeps a read inside a tick, when the
5000 ms exec timeout means it cannot — which is why the in-flight guard exists.
`MuxSession.discovered` did not say the flag is permanent, though `saveSessions()`
serializes it. The empty-read docstring claimed a distinction that `|| true`
makes impossible. The invariants doc promised more than its drift test delivers.
And CLAUDE.md had no pointer at all, leaving its two hardest prohibitions
("never set `status: 'error'`", "never null the pid") only in the file it is
meant to route people to.
Refs Ark0N/Codeman#446.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
An agent that arms a monitor, backgrounds a shell or hands a task to a
cloud session is told to end its turn. The pane then falls quiet, Claude
Code's idle_prompt notification arrives a minute later, and every surface
files the session under NEEDS YOU with nothing for a human to answer.
Claude states what it is still running on the last row of its screen
(`⏵⏵ bypass permissions on · 1 monitor · ← for agents`). That row is now
`capabilities.workDetect.watchingLine` in the CLI registry, guarded by
compileVersionRegex() like every other config regex, and the idle probe
reads it off the capture it already takes: `watchingLabel()` in
session-activity.ts searches the last five lines only, so a session that
PRINTS "1 monitor" is not mistaken for one running it.
The label lands on Session.watching and rides toLightDetailedState() out
to every surface. The phone overview, the desktop home rail and the rich
sidebar rows wear it as a `watching` badge in the accent colour, beside
the state pill and never in place of it: an agent can arm a monitor and
ask a question in the same breath, and only the pill says which.
Verified end to end against a throwaway session on an isolated beta
instance: the payload carried `watching: "1 monitor"` once the turn
ended, the badge rendered next to a yellow `waiting` pill, and both
cleared when the monitor died.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Two majors:
- The divider drag was unthrottled: every mousemove did a full xterm
reflow on BOTH panes and sent Pane B a {t:'z'} resize frame with no
unchanged-dimensions skip, fanning out into a `tmux resize-window`
child plus a SIGWINCH per event — ~50 of each dragging across half a
wide viewport. SplitTerminalPane.fit() is now split into localFit()
(reflow only) and fit() (reflow + send); the drag coalesces moves
into one localFit() per animation frame via requestAnimationFrame,
and sends the real resize for both panes exactly once, at drag end,
matching the primary pane's own throttledResize convention.
- Pane B pulled the FULL scrollback unchunked for every session mode,
writing it in one terminal.write() call. Mirrors the primary pane's
own mode check (app.js's selectSession): shell sessions get a
bounded 1MiB ?tail= fetch instead of ?full=1, and the fetched buffer
is written through a minimal chunked writer (32KB slices, yielding a
frame between each) instead of one primary-pane chunkedTerminalWrite
this simpler, independently created/destroyed pane has no equivalent
of (no session-switch generation counters or live-output gate).
Smaller items from the same review:
- Pane B now follows live appearance changes (applyTerminalSkin,
applyTerminalFontFamily, applyTerminalFontWeights, setFontSize all
propagate to it, matching the teammateTerminals pattern) and reads
the real codeman-font-size/terminalFontFamily/weights/DEFAULT_SCROLLBACK
settings at construction instead of hardcoding fontSize 14 / scrollback 5000.
- The Pane-B-promotion path now skips selectSession() when
_closingSessions already owns this delete (the user closing Pane A's
own tab), matching _onSessionDeleted's own active-session-handoff guard.
- Detaching a session AFTER a split is already open now yields the PTY
size in _sendResize() too (not just at picker-open time), mirroring
sendResize's own detachedElsewhere guard.
- .btn-split joins the body.solo-mode hide list, next to .btn-multimonitor.
- The split row was 6px wider than its container (two flex-shrink:0
50% panes plus a 6px divider): both panes are now flex-shrink 1.
- Pane B's header and the split-picker rows are marked so i18n.js's
exact-string lookup skips them, matching .session-name elsewhere —
a session literally named e.g. "Sessions" was translatable on zh-CN.
- The Split button now reflects open/closed state via a `.split-open`
accent style, aria-pressed, and a title/aria-label that says which
behaviour the next click gets.
- _splitPane.connect() is no longer an unawaited call with no .catch().
- terminal-split.js's fileoverview pointed at a doc path that was
renamed away in the previous push; @dependency now credits
constants.js for CodemanTerminalFont, not terminal-ui.js.
- index.html's Split settings chip no longer reuses data-preview-order
"12" (already the Ultracode Agents chip's slot in the same "header"
preview group).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Ark0N's PR #453 review: nothing gated this feature to desktop even
though the design called for it (two 240px min-width panes plus the
divider need ~486px, and the divider has no touch handlers), and
showSplitButton was a SYNCED setting, so turning it on at a desk also
put the button in the phone header.
- Hard-hide .btn-split on phones in mobile.css regardless of the
setting, matching the other desktop-oriented header buttons in the
same @media (max-width: 599px) block.
- Move showSplitButton into settings-ui.js's per-device displayKeys
set and drop it from SettingsUpdateSchema entirely, matching the
showFileViewerButton/skin precedent (CLAUDE.md's "per-device keys
... must NOT be added to SettingsUpdateSchema" rule) — a desktop
opt-in must never sync onto a phone that never asked for it. Removes
the now-invalid server-round-trip test for the setting.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
A second review of the previous commit found that its own repair for the
session leak introduced three defects, all from reaching for
cleanupSession() to undo a half-built session. That function is the
user-initiated delete, not an undo.
It banked the session's historical token and cost totals into the lifetime
figures, and a reboot never runs cleanup, so those totals had never been
counted before; every failed rebuild added them again. It saw the pin that
had just been restored and demoted the record to `stopped`, which this pass
reads as the durable marker of a deliberate kill, so a pinned session whose
rebuild failed became permanently unrestorable. And it recursively removed
`.claude-images` from the working directory, which belongs to the workspace
rather than to the session, so a failed rebuild destroyed the pasted images
of any other live session in that repo.
discardPartiallyBuiltSession() now undoes only what the construction did:
the map entry, the tab-layout slot, the listeners and any pane the launch
created before throwing. The persisted record, the lifetime totals, the
Ralph state and the workspace's files are left alone.
Re-applying the persisted state also splits in two, which removes the first
two defects at the root rather than only at the call site. The half that
shapes the pane, the custom-model environment and the nice priority, still
runs before the spawn. The half that is the session's own history now runs
after it, so a session whose pane never started carries no totals and no pin
for anything downstream to misread.
The rest of that review. The multi-user workspace confinement re-check read
the requesting user's grant, and returns true for an admin, so the case its
own comment described was the one it missed; it now resolves the entry
owner's grant through isWorkingDirAllowedForUsername, the way cron does. A
forbidden workspace goes back on offer, matching both the registry's stated
contract and the API reference. The client re-reads the plan after a restore
instead of blanking the banner, so entries the server put back stay
reachable, and a 409 now says a restore is already running rather than
reporting a failure. A dismiss arriving mid-restore wins, through a
generation counter the route carries across its take. The re-application
also restores the tab colour, the image-watcher flag and the original
pinnedAt, via a new Session.restorePin that does not re-stamp the pin time.
The phone breakpoint gains min-width: 0, without which a nowrap flex item
never shrinks and the buttons still overflow, and it folds into the existing
phone block.
Ralph's loop configuration still does not survive a restore, because
toState() reads it off a live tracker and there is no way to keep it without
arming the loop. The method now says so rather than leaving it implied.
Tests. The capacity test could not fail on the property it existed for: it
filled the board past the cap before the loop, so a single pre-loop check
would have passed it. It now leaves one seat, so only a per-iteration check
restores exactly one entry. New tests cover the ordering around the spawn,
a throw before the loop returning the whole plan and releasing the flight,
the dismiss-during-restore race, and that the failure path calls the narrow
discard rather than the delete. The shared mock context gains the port
method it was missing, which is what made the first run of these tests fail
for the wrong reason.
Refs #411
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Fifteen findings from two independent reviews of #442, three of them
blocking. Every one is addressed here.
The three blockers all sat in the restore route. A rebuild that threw after
addSession left a registered session with no pane behind it, visible on the
board, holding a layout slot and written to state.json, with its plan entry
already spent; the catch now cleans the session up and puts the entry back.
The loop checked neither the global nor the per-user session cap, so one
click could take a board past a documented limit; capacity is now re-checked
per iteration, because the loop is itself creating the sessions it counts.
Worst of the three, a rebuilt session carried none of the state its
constructor has no parameter for and then persisted itself over the record
that held it, zeroing token and cost totals and dropping the pin. The pin
matters most: pruning keeps a record only while it is pinned, so discarding
it handed the record to the next stale sweep. A new
reapplyPersistedSessionState() on the session port restores the pin, the
token totals, auto-compact, auto-clear, auto-resume, nice priority, the
flicker filter and the custom-model selection, and it runs before both
startInteractive and the first persist.
The rest, in the order they bite a user. Every rebuild failure was reported
as workspace-missing, so the banner told users their repo was gone when the
agent had simply failed to start; there are now distinct reasons, and the
toast names each one. The client read restored and skipped off the outer
response object rather than through the uniform envelope, so every count
came back zero and neither toast ever fired. A board left open across the
reboot never learned an offer existed, because the banner was seeded only on
the page-load path; it now re-reads on every SSE init. The workspace check
was existence-only, skipping the multi-user confinement that the create
route applies, so a withdrawn grant would not be noticed. The banner had no
phone breakpoint while its text was nowrap and its buttons could not shrink.
Smaller: a missing workspace is now re-offered rather than dropped, while an
already-open conversation is dropped rather than re-offered forever; a throw
anywhere in the route returns the unspent entries instead of discarding the
plan; the single flight is keyed by owner, since take() already stops two
callers receiving one entry; the env clamp's header no longer claims a
protection it cannot provide on this path today, and names the check that
does bite; the three endpoints are documented in docs/api-reference.md; and
the module header now says that os.uptime() reads the host's clock, so the
feature is effectively off inside a container.
The review also explained why the tests missed all of this: they proved the
construction claim through their own copy of the construction rather than
through the route, and the route tests used workspaces that did not exist,
so no Session was ever built. test/routes/reboot-restore-rebuild-failure.ts
mocks the Session module to drive the route's real path, and covers the
cleanup, the reason reported, the re-application ordering, the broadcast and
the caps. The mock route context gains the port method and the mux call the
route needs.
Refs #411
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Rebased over #390, which moved the phone tier's cutoff from 430px to
600px. The palette's compound fold rule now lives in the 600-768px band
mobile.css pads, the cascade samples the palette inside that band, and
the closed iPhone Duo (466pt) is a phone rather than a small tablet while
the open one (626pt) stays a tablet. Comments in both stylesheets, the
device registry, CLAUDE.md and architecture-invariants say 600.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Three cascade problems in the fold reserved-region CSS, each measured by
computed style in headless Chromium (styles.css + mobile.css in index.html
link order):
- The unconditional .path-picker-overlay / .path-preview-overlay fold rules at
the end of the file beat the `padding: 0` both overlays set under 600px, so
every phone got a 16px and 18px gutter on dialogs built flush (393 and 500px:
edges floating off the screen). The fold strip is now restated on a ZERO
base inside the same media query: 0/0 without a fold, the strip alone with
one, 16/18 plus the strip from 626px up as before.
- .modal.command-palette-modal was unscoped, so outside the 430-768px band
(where mobile.css pads the palette with a shorthand) it ADDED 0.75rem with
no gutter to compose with and pushed the shell 6px off centre at 393, 900
and 1400px, while inside the band the shorthand beat the generic .modal rule
on the bottom side and the palette lost its block-end gutter. The compound
rule now lives inside that band and restates both sides.
- The tabletop cap on .response-viewer lost to mobile.css's `max-height:
92dvh` under 430px (same specificity, later file). mobile.css now carries an
identical twin at its end.
test/foldable-layout.test.ts simulates the padding cascade across both files
at every breakpoint, with and without the fold rules, and requires the two to
differ by exactly the fold strip; it also pins the palette rule to the band
mobile.css keys on and the response-viewer twin to the styles.css value. Its
model reproduces the Chromium numbers, and against the pre-fix stylesheets it
fails on all three problems.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
The phone block lifted the toolbar (and padded .main) by (100vh - --app-height) on iOS Safari to clear a bottom bar that position: fixed elements were assumed to sit behind. On iPhone Safari fixed elements already stop above the bar, and 100vh is the large viewport with the bar collapsed while --app-height is the visual viewport with it expanded, so the expression measures the bar's collapsible height and shows up as an empty band between the toolbar and the bar whenever the bar is expanded. The terminal was padded by the same amount.
The lift is now --chrome-overlap, set in updateAppHeight() as innerHeight minus the visual viewport height: the distance the layout viewport that anchors fixed elements extends past the visible area. That is 0 on iPhone Safari, so the toolbar meets the bar, and it is the overlap itself on any browser where fixed elements really do land behind the chrome, so those keep the lift. The keyboard-visible rules, which already override the toolbar offset, are unchanged.
The phone tier stopped at innerWidth < 430 and @media (max-width: 430px), so every current large phone landed in the tablet layout: the 430pt iPhone 14 Pro Max, 15 Plus, 15 Pro Max and 16 Plus, the 440pt iPhone 16 Pro Max and 17 Pro Max, Pixel 6 Pro, 7 Pro and OnePlus 12 Pro, the 448pt Pixel 8 Pro and 9 Pro XL, and the Galaxy Z Fold 5 cover screen at 460. On those devices the header icon row replaced the session pill, the toolbar kept the desktop Run Shell button instead of Enter and the mic, the keyboard accessory bar could never become visible because its .visible rule lives inside the phone block, and the toolbar jumped to the top of the page when the keyboard opened.
The new cutoff is 600, the line test/mobile/devices.ts already draws between large phones (430-599) and small tablets (600-767). No physical device sits between 480 and 600, but a phone zoomed out one or two steps in Safari does: a 440pt iPhone at 85% or 75% page zoom reports 518px or 587px and still needs the phone controls, which a 480 cutoff would have taken away. The phone block is max-width: 599px and the tablet block starts at min-width: 600px, so a 600px device is a tablet in CSS and in getDeviceType() alike instead of straddling the boundary the way 430pt phones did.
The number changes everywhere it is encoded: JS, CSS, comments, CLAUDE.md, the CI tests that pin the phone block, and the test:mobile helpers. Measurement history that names 430px stays as written.
#367 (UserPromptSubmit hook): `hook:prompt_submitted` went on the wire
unregistered; it is now in both SSE registries (158 = 158), and the hook only
lands in the run summary when the conversation actually moved, since one row
per prompt would evict useful rows from the 1000-event FIFO and clutter the
Summary timeline and /api/search.
#368 (Add Case header submit): the pending-state dimming targeted the footer
button, which the <=860px layout hides, so on a phone the only visible submit
control stayed at full brightness while a clone ran. The header button now
dims too, and a static test pins the header-submit contract so it cannot
silently disappear again.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
mobile.css hides #createCaseModal's .set-foot below 860px, and that modal's
header — unlike Settings' — carries no set-head-save. So on a phone the
Create/Link button existed nowhere and the modal could not be submitted at all.
Adds the header button and drives both together through switchCaseModalTab()
and submitCaseModal(), so whichever one is pressed the other shows the same
pending state and is equally unclickable. Following the Settings pattern also
means Add Case picks up the existing .set-head-actions:has(.set-head-save) tray
and .set-head-save sizing with no new CSS; the mobile.css comment that still
listed Add Case as a lone-× sheet is corrected to match.
Adds `mode: 'deepseek'` alongside claude/shell/opencode/codex/gemini/
antigravity/pi/grok, plus a shortcut that opens the harness's own browser UI
as a Codeman web tab.
DeepSeek is wired unlike its siblings in three ways, each of which is the
reason for a design decision rather than an accident:
1. The agent is a PROFILE, not the binary. `dsh` is a launcher over
$DSH_HOME/profiles/<name>, and DeepSeek ships only `web`, `headless` and
`base` -- the interactive terminal front door is always a third-party
plugin. So availability is two questions: `isDeepSeekAvailable()` (binary)
and `isDeepSeekRunnable()` (binary AND a pane-capable profile). The Run
button gates on the latter, because reporting only the binary would spawn a
pane that dies on arrival. When the binary is present but no profile is,
the run menu offers to install one (POST /api/deepseek/install-profile).
2. The permission switch is an env var, not a flag. The harness has no
command-line permission option; its sandbox/approval rows read
DSH_PERMISSION_MODE (read-only / workspace-write / danger-full-access).
Exported via `tmux setenv`, never on the spawn line. Absent = the harness's
own workspace-write, which still asks, so the multi-user clamp is the
only-if-sent branch and clamps to workspace-write, never read-only.
3. It is the only non-claude mode that passes hooksAvailableForMode(), and it
earned that. The terminal front door reports idle/working/blocked to a
supervising process over a generic env-gated contract; a generated shim
(deepseek-status-shim.ts) makes Codeman that supervisor and forwards each
report to /api/hook-event as stop / agent_working / permission_prompt. So a
dsh session gets definitive respawn triggers, real wait-endpoint signals and
real Approvals Inbox items instead of output-stabilization guesswork.
`agent_working` is new (157th SSE constant) and joins
APPROVAL_RESOLVING_EVENTS so a dialog answered in the terminal clears its
alert at once.
The resolver needs the strictest identity probe of the family: `dsh` is not
merely a squattable npm name, Debian ships an unrelated `dsh` (dancer's shell),
so `dsh --help` must print the harness's own banner before a candidate is
handed a spawn line.
Model is deliberately not a session field -- it is a composition entry in the
profile's config tree. Env allowlist gains DSH_* and DEEPSEEK_* only; provider
keys named by a settings-file `apiKeyEnv` stay out, which is pi's
34-provider-key problem in a new shape.
Verified live against dsh 0.1.1-rc.2 and @deepseek-harness-tui/dsh-tui: the
status endpoint's two-part answer, the no-profile refusal, the profile
bootstrap, a real session whose pane runs `dsh --profile dsh-tui` with the
permission mode injected via setenv, and the full status bridge -- a
send-and-wait returned signal "stop" from a real turn, and blocked/working
created and cleared an Approvals Inbox item.
Docs: docs/deepseek-integration.md (guide), docs/deepseek-integration-plan.md
(decisions + honest gaps). Tests: test/deepseek-mode.test.ts,
test/deepseek-cli-resolver.test.ts.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
SessionMode gains 'grok', a first-class backend alongside Claude Code,
shell, OpenCode, Codex, Gemini, Antigravity and Pi: its own PTY, tmux
session, charcoal tab identity ('gk' badge), welcome button, run-mode
entry, cron agentType, Docker and remote-SSH command defaults, and
clone-repo Brain option. Flag surface verified live against grok 1.0.5.
Grok mixes two existing shapes and the wiring follows from that:
- Codex-shaped on permissions: the bypass switch is GrokConfig.alwaysApprove
(--always-approve, grok's bypassPermissions mode; config-level deny rules
still apply on top). The Run button sends it true, like runAntigravity(),
and clampExternalCliBypassForOwner() puts grok in the only-if-sent branch:
a bare grok spawn is grok's own ask-mode default, which is already safe,
so only a sent config needs the flag forced off. Cron needs nothing for
the same reason.
- OpenCode-shaped on rendering: grok is a fullscreen alternate-screen TUI
with mouse support, so it stays OUT of isAltScreenStripMode() and lands
on the narrow tmux-attach strip and the 'buffer' local-echo fallthrough
(unmeasured against an authenticated composer; documented fallback is the
'off' branch).
- Pi-shaped on resolution: 'grok' has npm squatters (@vibe-kit/grok-cli
also installs a grok bin), so grok-cli-resolver.ts version-probes every
candidate (grok --version, killSignal SIGKILL, VITEST-gated) and
GET /api/grok/status surfaces path AND version; GROK_VERSION_REGEX is
shared with the dependency registry so doctor and run mode cannot drift.
Env allowlist gains GROK_* plus the XAI_* vendor namespace (XAI_API_KEY is
grok's documented headless auth var), the same narrow-vendor reasoning as
GOOGLE_* for gemini. Resume is id-regexed on purpose: grok's own --resume
also matches session titles, which are arbitrary user strings that must
never reach the bash -c spawn line.
Docker: grok is not on npm, so the agent image installs it in its own step
(xAI's installer has no --dir override; the binary is copied to
/usr/local/bin and root's ~/.grok dropped in the same layer), and
credentials are seeded per-file (auth.json, config.toml, pager.toml; the
dir also holds sessions/, memory/ and the ~160MB binary). Remote SSH routes
through the login-shell wrapper like the other agent CLIs.
Verified end to end on an isolated CODEMAN_INSTANCE with grok 1.0.5
installed: /api/grok/status resolves and reports the probed version,
quick-start spawns a pane whose command line ends in 'grok
--always-approve', the real TUI renders (OAuth device screen on an
unauthenticated box), and grokConfig round-trips through state.json.
Docs: docs/grok-integration.md (user guide) + docs/grok-integration-plan.md
(decisions, verification record, follow-ups).
Tests: test/grok-mode.test.ts, test/grok-cli-resolver.test.ts, plus
extended clamp/system-routes/render-index-html/run-mode-ui/mobile-overview/
local-echo-gating coverage. npm test (the CI gate) green: 5910 tests.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Session List Layout gains a third option. The old "Left sidebar" becomes
"Left sidebar simple" and is unchanged down to the byte; the new "Left sidebar"
puts on each row what the desktop home rail and the phone overview already show:
when the session was first created, how long it has been in the state it is in,
and a status pill naming that state.
A docked column is not a tab strip. It has width to spare and a row per session
either way, and "name + folder" is the whole story a TAB can tell, not the whole
story there is. This is the information that was missing, and it already existed
one surface over.
Both sidebar values are the same layout, and both set data-session-list="sidebar";
the row detail rides on a separate data-sidebar-detail attribute. That split is
the load-bearing decision here: every one of the ~25 isSessionSidebarActive()
call sites and every html[data-session-list="sidebar"] rule in styles.css and
mobile.css keeps matching both variants without being touched. A third
data-session-list value would have meant auditing and editing all of them.
- Stored values: 'header', 'sidebar' (simple), 'sidebar-rich'. Anyone already on
'sidebar' keeps exactly the layout they picked — the rename is label-only.
- State classification and the "how long has it been like this" anchor come from
_mobileOverviewState() / _mobileOverviewSince(), not re-derived, so the three
surfaces cannot disagree about what "working" means. A working pane repaints
~1/s, so its duration is measured from the turn's last Enter: a running turn
reads "working 12m", not "0m".
- Stamps refresh in place on a 20s clock rather than by re-rendering — a rebuild
would restart every load spinner and alert animation in the list, twice a
minute. The clock runs only while rich rows are on screen, and is stopped from
both render paths and from applySessionListLayout().
- The incremental render path updates the pill, the accent class and the since
anchor; a tick alone cannot see a state change, and a new turn re-stamps
lastSubmitAt without changing state.
- applySessionListLayout() now re-renders on a DETAIL change too. simple <-> rich
leaves data-session-list on 'sidebar' both times, and the meta line is emitted
by the row template rather than toggled by CSS, so the old layout-only test
would have flipped the setting and repainted nothing.
- Width: 300px for the extra line. The collapsed 44px rail and the handheld
drawer are both explicitly held back from it — the desktop rule is (0,3,1) and
would otherwise out-specify mobile.css's (0,2,1) drawer base and pin a 320px
phone's drawer to 300px.
- Missing/stale mobile-overview.js degrades to a row with no meta line rather
than throwing and taking the whole tab strip down.
15 new tests cover the attribute split, the solo-window override, the
detail-change re-render, the row model, both render paths, the clock lifecycle
and the mobile width guard.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The active tab is the only one that grows a gear and a close button, and with a
short session name they were eating it: "w1" rendered a 13px label while gear
plus close took 50px of a 116px tab, so the tab's geometric centre landed on the
gear and a thumb aiming at the middle of the tab opened Session Options instead
of switching sessions. Reserving a minimum label width on the active tab widens
the tab by the difference instead.
The floor is set by the 10th tab onward, which renders no number badge and so
sits 10px further right; a numbered tab clears the icons at 20px but a
numberless one needs 40px. The test recomputes that inequality from the
stylesheet rather than pinning the pixel.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Brings in https://github.com/christianhaberl/Codeman/pull/4 (three commits,
authorship preserved) and adapts it across the 211 commits master gained
since the branch was cut:
- App Settings control re-authored for the set-* surface (PR #278): a
set-row in Layout -> Tabs, replacing the old settings-item markup the
branch targeted. i18n description synced.
- Lineage arcs (PR #291, post-branch) are SKIPPED in sidebar layout:
computeLineagePath()'s U-bridge geometry hangs from the horizontal
strip's bottom edge and has no meaning against a vertical list. The
lineage strip-scroll listener now also redraws subagent/ultracode
connectors while the sidebar scrolls vertically.
- The desktop home tab rail (post-branch) defers to the sidebar: both dock
the session list flush left, and the rail would render z-ordered under it.
- Active-row reveal unified into _scrollActiveTabIntoView() (#257 landed on
master after the branch): sidebar mode branches to scrollIntoView
block:'nearest', and _fullRenderSessionTabs() restores scrollTop alongside
the #257 scrollLeft restore so ambient rebuilds cannot yank a mid-scroll
sidebar back to the top.
- Mobile active-tab hoisting the branch guarded against no longer exists on
master (removed by #257); kept master's order-stable render.
Verified: typecheck, lint, format:check, check:frontend-syntax,
check:public-assets, PostCSS parse of both merged stylesheets, the 26 new
jsdom tests, the structural guard suites, and the headless-Chromium harness
(scripts/verify-session-sidebar.mts) green across all seven layout states
at 1600/1000/393px against current master.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
SessionMode gains 'pi', a first-class backend alongside Claude Code,
OpenCode, Codex, Gemini and Antigravity: its own PTY, tmux session, rose
tab identity, welcome button, run-mode entry, cron agentType, Docker and
remote-SSH command defaults, and clone-repo Brain option.
Pi is a different shape of CLI from the other four, and three decisions
follow from that:
- It has NO permission prompts and no sandbox, so there is no
--dangerously-skip-permissions analog and none was invented. The
privilege-shaped knob is the tri-state approveProjectTrust, which makes
pi load and EXECUTE repo-local .pi/extensions TypeScript and install
missing project packages. clampExternalCliBypassForOwner() therefore
puts pi in the MATERIALIZE branch: a non-granted multi-user owner gets
--no-approve even when no config was sent, because pi's own default is
a prompt the session user could answer themselves. That helper had zero
test coverage; it now has coverage for all four CLIs.
- Only the PI_ prefix joins the env allowlist. Pi's ~34 provider key vars
share no prefix and ALLOWED_ENV_PREFIXES is one global list with no mode
context, so admitting them would widen the allowlist for every mode at
once. Auth goes through pi's /login or the server's own environment.
--api-key is deliberately never wired: it would put a provider secret on
the spawn command line.
- pi stays OUT of isAltScreenStripMode(). Its default TUI renders into the
main screen with terminal-owned scrollback, and its 0.84.0 fullscreen
mode is runtime-switchable via /settings; that flip was measured to put
the pane into the alt screen, which the strip would have corrupted.
pi-cli-resolver.ts additionally sanity-probes `pi --version` and requires
semver-shaped output, because `pi` is a short generic name a stray binary
can shadow; GET /api/pi/status surfaces path and version so a
misresolution is diagnosable rather than presenting as a broken mode.
Docker installs pi in its own --ignore-scripts step so that flag cannot
affect the other four CLIs, and seeds its credentials per-file rather than
whole-dir (~/.pi/agent also holds sessions, extensions and package trees).
Verified end to end against pi 0.84.1 on an isolated instance: resolver
search-dir fallback, flag construction, piConfig persistence across a full
server restart, the trust prompt and its --no-approve suppression, the
rose Run button on the default daylight-blue skin (the nested skin block
eats per-mode gradients unless the rule lives inside it), and the buffer
local-echo policy, which pi tolerates where codex did not.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Release 1.16.6: phone overview started/idle stamps, plus fixes for the
selection-dialog keyboard lockout, the accessory bar arrows bypassing the
local-echo overlay, and recovered sessions being restamped as newly created
on every server restart.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Below 860px Save moves into the header (a bottom action bar would cost 60px
of a phone sheet), which left the two ways OUT of the sheet sitting side by
side in mismatched shapes: a fat accent pill next to a bare 1.5rem glyph
with no box at all. They are the same decision (save-and-close vs
discard-and-close), hit in the same corner with the same thumb, so they now
share a recessed tray and matching pill geometry and read as one cluster.
- 36px on both, so the tray comes out at 44px including its 3px padding and
1px border — the same height as the phone header it sits in.
- `.modal-close` gets a real box (36x36, radius 9) only inside the tray; its
bare-glyph form is still right in a plain modal header.
- Tray colors come from skin tokens (--border/--bg-input). A hardcoded black
alpha would render as a grey slab on the four light skins, the same trap
the layout preview frame hit.
- `:has(.set-head-save)` keeps the tray off the sheets that carry a lone x:
Session Options and Add Case save from inside their own forms.
- The shared focus ring offsets OUTWARD, which inside the tray would draw on
top of the tray border, so it is inset to ring the button instead.
DOM order stays close-then-save so the focus trap still lands on Close;
row-reverse paints Save to its left.
Verified at 390x844: tray 44px tall, Save 36px, Close 36x36, both radius 9
inside a 12-radius tray. PostCSS-parsed (prettier does not catch an unclosed
CSS block, and styles.css is prettier-ignored by design).
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Three things, all on the same surface.
**Tighter.** The shell drops to 760x620 (was 840x700) and the density comes
down with it: rail 176px, doc padding 15px, row padding 5px 10px, group gaps
3px, section head 0.88rem, row label 0.76rem, description 0.645rem. The model
cards were the biggest block in the document and shrink the most (6px 8px
padding, 0.72rem name). The toggle switches keep their size on purpose - only
the space around them was the problem.
**Checkboxes stay checkboxes.** The respawn cycle steps go back to real
checkboxes in a row card (`.set-checks` / `.set-check`) rather than the chips
they briefly became: they are numbered steps of one sequence, not a set of
independent tags, and chips read as the latter.
**Add Case joins the surface.** Same shell, rail and sections; its rail
switches panels like Session Options'. The six panels keep their legacy
`.form-row` markup - every id in them is read back by session-ui.js, so
restructuring the forms would be a lot of risk for no visual gain. Instead an
adapter block scoped to `#createCaseModal .set-doc` maps the old primitives
onto the look: a form row paints as a row card, its label as a row label, its
`.form-hint` as a row description, `<details class="advanced-options">` as a
collapsed group head. `.form-row` everywhere else is untouched.
With that, `.modal-tabs` / `.modal-tab-btn` / `.modal-tab-content` have no
users left, so their CSS is deleted from both stylesheets and the guard in
test/app-settings-structure.test.ts flips from "the settings modal must not
steal these shared classes" to "nothing uses them any more" - a reappearance
now means a modal drifted back off the shared surface.
Session Options was the last modal still wearing the old chrome: a strip of
top tabs over `.form-row` stacks, sitting next to a settings modal that had just
been rebuilt around a rail and grouped row cards. It now uses the same surface.
The `set-*` rules move from `#appSettingsModal` to
`:is(#appSettingsModal, #sessionOptionsModal)`. An `:is()` list takes the
specificity of its most specific argument, and both arguments are ids, so every
rule keeps exactly the weight it had - nothing downstream shifts in the cascade.
What the two modals do NOT share is what the rail means:
- App Settings stays a table of contents over one scrolling document.
- Session Options switches: one `.set-section` visible, `.hidden` on the rest.
Summary owns its own scroller and Respawn is long, so stacking them into a
single document would bury both. `switchOptionsTab` now queries
`.set-rail-item` (it read `.modal-tab-btn` before) and resets the document
scroll, so a switched-to section starts at its own top.
Phones get a horizontal, scrollable rail strip rather than App Settings' sticky
jump pill, which Session Options has no equivalent of. That is close to the tab
bar it replaces, so the phone gesture is unchanged.
Content is regrouped into the row language - label, description, control pinned
right - across all four sections: usage limits / respawn loop / cycle steps /
loop control, identity / token management / this session, tracker / limits, and
the summary timeline. The three cycle-step checkboxes became chips, which is why
`_syncSettingsChips` now covers both modals and Session Options registers one
delegated change listener per page for them.
Every id and handler the JS reads is preserved, and the component classes it
queries (`.duration-preset-btn`, `.duration-custom-input`, `.color-swatch`,
`.respawn-status-text`, `.run-summary-filters .filter-btn`) are untouched.
`data-claude-only` moved onto the rail entries, so external-CLI sessions still
lose Respawn and Ralph and land on Context.
`.modal-tabs`/`.modal-tab-btn`/`.modal-tab-content` now belong to
#createCaseModal alone. test/session-options-structure.test.ts pins the rail to
section pairing, the ids openSessionOptions reads, the one-visible-section
invariant and the Claude-only entries.
The footer buttons shipped with class="btn btn-secondary/primary", but no
.btn or .btn-secondary rule exists in this codebase, so all four rendered
as unstyled UA buttons. Moved them to the btn-toolbar convention every
other modal footer uses, with a scoped flex-row footer rule (btn-toolbar
is display:flex, block-level) mirroring the runSummaryModal footer.
Send's accent needs a (0,4,0) re-assert: the skin block's bare
.btn-toolbar rule is (0,2,1) under html:not([data-skin="og"]) and beats
.btn-toolbar.btn-primary (0,2,0), the same specificity trap CLAUDE.md
documents for mobile.css. Scoped to this modal; the repo-wide greying of
btn-primary on non-OG skins is pre-existing and left as a design call.
The empty-result copy now points at the steer note sitting right below
it ("Add a steer note and Rethink to try again"), zh-CN updated.
Verified with the steer E2E (still green) plus desktop, phone (390px),
and error-phase screenshots; static guards extended to pin the footer
convention and the accent re-assert.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The document side of the settings modal was wider than it needed to be: every
row is text on the left and a switch pinned to the right, so a 960px shell plus
a 62ch cap on the description left a dead gap of ~350px between the two. The
shell is now 840px, the rail 196px, and descriptions run to 78ch, which closes
the gap and makes the right side sit proportionally with the rail.
Section order now leads with what you look at first: System (the version this
install runs and whether an update is waiting, with Updates promoted above
Paths/Automation/Remote access), then Terminal & Input, then Header & Panels.
The modal opens scrolled to System instead of Terminal & Input.
Header & Panels gains two things:
- every chip carries the icon of the button it switches on, so the list reads
as the header itself rather than as a column of names (File Viewer shows the
folder button, Cron the clock, and so on);
- a live preview above the chips: a scale model of the app with a header bar,
right-docked panels, a toolbar and floating windows, rebuilt on every chip
change so "what does this add" is answered in place, before saving.
The preview owns no icons of its own - it CLONES `.set-chip-ico` out of the
chip - so each icon has exactly one copy in index.html and a chip can never
drift from the button it previews. A chip joins the preview by carrying
`data-preview` (which slot) and `data-preview-order` (where in it); readouts
that are not buttons (plan usage, CPU, font size) use `data-preview-text`
instead. The frame is painted from skin tokens only, since hardcoded black
alphas turned it into a grey slab on the four light skins, and it is marked
`data-i18n-skip`: the mock tab names are decoration, and the labels inside are
copies of chip text i18n has already translated.
Cron moved into its own Scheduling group (it is a toolbar button, not a header
one, and the preview places it accordingly).
test/app-settings-structure.test.ts pins the new contract: the rail and the
document agree on order, System leads with the version above the paths, and
every previewed chip has both an icon to clone and a slot that exists.
Adds the optional free-text steer note to the Read My Mind modal: a
dashed input under the suggestions ("no, I meant the mobile bug") that
rides along as `steer` on every Rethink. The API already accepted it;
this wires the frontend end of the contract.
- Shown whenever Rethink is live (ready AND empty-result phases),
hidden only while a prediction runs; typed text survives re-runs.
- Enter in the field triggers Rethink, mirroring the prompt field's
Enter-to-send; a fresh open clears it with the rethink memory.
- Trimmed and capped to the schema's 2000 chars on the way out; a
plain open still sends an empty body (neither steer nor rejected).
- zh-CN strings for the placeholder and aria-label, phone-sized
touch target in mobile.css, static guards in the phase-3 test.
Verified with a browser E2E against a live dev server (stubbed predict
endpoint): payload contents, phase visibility, Enter wiring, and
reset-on-reopen all asserted with real keystrokes.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Review of #268 turned up two defects, both verified against a real shell
session on an isolated instance.
1. A tap spent the modifier. The onData hook consumed every chunk while
armed, but not every chunk is a keystroke: a shell session keeps the
narrow scrollback strip, so mouse DECSETs reach the browser, and with
vim/htop running a tap arrives as `\x1b[<0;31;23M`. Measured in the
real app: armed, one tap, disarmed, and the Ctrl button read as dead.
The hook now skips mouse and focus reports via a new
`CodemanTerminalInput.isTerminalFocusOrMouseReport()`; they still reach
the PTY, they just no longer stand in for the next key. Focus reports
are covered for the same reason even though FOCUS_ESCAPE_FILTER in
session.ts strips DECSET 1004 today, since the bar refocuses the
terminal after every key and would spend the modifier on its own
`\x1b[I` the moment that filter changed.
2. The armed style did not land on the four light skins. The competing
rule is (0,3,1), not (0,2,1) as the comments claimed: `:is()` takes the
specificity of its most specific argument and that list holds
`.btn-toolbar.btn-shell`, so it outranked the (0,3,0) armed rules in
both stylesheets. Measured across all seven skins at 390px, armed and
resting backgrounds were byte-identical on paper-gray, solarized-light,
catppuccin-latte and rose-pine-dawn. The light-skin rule now excludes
the state as `.accessory-btn:not(.armed)`, which fixes phone and tablet
at once; adding another class to the armed rules would only have moved
the tie.
Tests: 20 more cases in test/mobile-shell-keyboard.test.ts (the report
classifier, the gate's effect on the modifier, and a static guard on the
light-skin selector, since the existing E2E background assertion passes on
a light skin and the browser suite runs the dark default), plus a browser
regression that taps the terminal with mouse reporting on.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The desktop home rail and the phone overview both draw a spinning
`tab-load-spin` ring around their green dot while a session works; the
tab strip itself only pulsed. Same ring on the tab dot now, so "working"
reads identically on every surface.
Drawn as a ::after border circle rather than a halo: the skin block sets
`box-shadow: none` on .tab-status.busy to keep tab dots quiet and
outranks any plain class rule, and a pseudo-element sidesteps that
without reintroducing the glow. It is absolutely positioned, so it never
widens the tab or shifts the label, and it is disabled under
prefers-reduced-motion.
Phones keep their existing tell (a 9px dot with a glow) and suppress the
ring: a 15px ring inside a 32px tab would sit on top of the tab name.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The modal had grown to 8 tabs that wrapped onto two rows on desktop and
became a horizontal scroller on phones, with a "Display" mega-tab holding
11 sections and ~35 controls. Local Echo sat 60% down it, and the model
settings were split across two tabs whose three controls fought each
other (the 1M Opus toggle's own hint said it was "ignored when a Claude
Model is selected above").
Replaced with a left rail that is a TABLE OF CONTENTS over one scrolling
document: every section stays mounted, the rail follows the scroll, and
find-in-page works across the whole thing. Nine sections:
Terminal & Input (Local Echo is the first row of the first section)
Appearance, Header & Panels, Models, Agents & CLIs,
Notifications, Voice, Shortcuts, System
Models are now one page. The picker is a card grid of BASE models with a
single "1M context window" switch; context becomes a property of the
chosen model and composes back into `claudeModel` as `base + [1m]`, which
retires the precedence trap. Thinking effort is a segmented control on
the same page, and the old Models tab (task routing) becomes a collapsed
Advanced block under it.
The 12 header-button toggles and the 8 panel toggles become chip grids,
which is most of the old Display tab reclaimed. Rows now say whether a
setting is per-device or synced, stated once per group.
Phones drop the rail for a sticky jump pill that names the current
section and opens a jump list, move Save into the header (the bottom
action bar cost 60px), and render groups as one inset rounded list with
hairline dividers instead of a stack of bordered cards.
Load and save are untouched: every control keeps its id, so
openAppSettings()/saveAppSettings() work as before. Model cards and the
effort segment are views over hidden <select>s that stay the source of
truth. test/app-settings-structure.test.ts pins that contract, plus the
rail hooks admin-ui.js injects the multi-user Users section into.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The Read My Mind modal grows up and reaches phones:
- Alternate suggestions (the predictor's verify/redirect kinds) now render
as tappable rows below the main field. Tapping one swaps it into the
editable field; the edit you were making folds back into the row you
leave, so toggling between alternates never loses typing. Rethink now
records the WHOLE shown set (main + alternates) as rejected.
- Phones get a 🧠 key on the keyboard accessory bar (both simple and
extended layouts), gated on the same synced readMyMindEnabled setting
via an rmm-enabled marker class on the BAR element: setMode() rebuilds
the buttons' innerHTML, so per-key state would be wiped. Synced at init
and re-synced by applyHeaderVisibilitySettings() on every settings
apply, so a live toggle needs no reload. The header button stays off
phones.
- On phones the modal renders as a small dialog (mirrors modal-sm) instead
of the full-screen default, with wrap-friendly finger-sized footer
buttons. Not modal-sm itself: that caps desktop width at 340px and this
modal wants 560px there.
- On touch devices the ready/swap paths no longer focus the field, so the
OS keyboard does not pop over the alternates that just rendered.
- New static guard test/readmymind-phone-key.test.ts pins the dual-template
key, the marker-class gating, the phone-hidden header button, the
small-dialog phone modal, and the no-innerHTML discipline.
Part 2 of phase 3 (rethink steering, the free-text steer note) is next;
the API already accepts steer.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The mobile accessory bar was built around coding-agent commands, so a shell
session had no way to send Ctrl chords at all.
A shell-mode session now gets its own bar automatically: Ctrl, Esc, Tab,
four arrows, paste, dismiss. Agent sessions (claude, codex, opencode,
gemini, antigravity) keep the existing bar unchanged.
Ctrl is a one-shot modifier: tap it and it lights up, the next character
typed on the system keyboard is sent as its control byte, and Ctrl disarms.
Tapping it again cancels. That puts Ctrl+C/D/Z/R/L/A/E/W/U/K on a
nine-button bar without a button per chord.
Implementation notes:
* The interception lives in terminal.onData, not a keydown handler: a
virtual keyboard reports no usable key events, so the character only
exists as onData text. It sits after shouldSuppressTerminalQueryResponse
(xterm answers DA/CPR queries through onData too, and letting one of those
spend the modifier would silently eat the user's Ctrl) and before every
send path, so the control byte follows the normal control-char route.
* ctrlByteFor() maps `code & 0x1f` over @A-Z[\]^_ and a-z, plus
Ctrl+Space = NUL and Ctrl+? = DEL. Characters with no control equivalent
pass through unchanged, like a hardware keyboard.
* The bar now separates the base layout (the extendedKeyboardBar setting)
from the effective one, resolved per session by refreshForActiveSession().
A settings save during a shell session cannot yank the bar away, and
switching back to an agent tab restores the user's choice.
* Ctrl disarms on use, a second tap, any other accessory key, a session
switch, keyboard dismissal and a layout swap.
* Ctrl joins the refocus set, so tapping it keeps the terminal focused and
the keyboard open.
* The armed style needs three classes to outrank mobile.css's light-skin
.accessory-btn rule at (0,2,1).
Verified end to end against a real shell session on an isolated instance:
tapping Ctrl then typing c interrupted a running `sleep 300` (^C in the
pane), the modifier disarmed, plain typing stayed literal, Ctrl+L cleared,
and a cancelled Ctrl typed a literal c.
Tests: test/mobile-shell-keyboard.test.ts (new, runs in CI) covers the
mapping table, layout selection per session mode, base-mode memory and every
disarm path; test/mobile/keyboard.test.ts adds nine browser regressions that
drive the real xterm with page.keyboard.type() and assert on the bytes that
would go out.
Closes#262
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
With five tabs open on a phone, the right-hand tabs were effectively
unreachable. Selecting a tab only toggled the .active class, so the strip
never moved, and every full rebuild (a task badge appearing, a session
created elsewhere) replaced the strip's innerHTML, which resets scrollLeft
to 0 and yanked a mid-swipe strip back to the first tab.
Three changes, which only work together:
* computeTabScrollLeft() (pure, constants.js) decides the scroll target from
measured rects, and _scrollActiveTabIntoView() applies it on selection.
Rect math on the strip's own scrollLeft rather than scrollIntoView(), which
also scrolls ancestors: on a phone that is the document, under a fixed
header and possibly an open keyboard.
* _fullRenderSessionTabs() saves and restores scrollLeft across the rebuild,
and re-reveals the active tab only when it actually changed
(_lastRenderedActiveTabId), so a background render never undoes a manual
swipe.
* Mobile no longer hoists the active session to the front of the strip. That
reordering ran on full renders only, so tab order flipped depending on
which render path fired, and it renumbered the Alt+N badges. Scrolling the
active tab into view replaces it.
Also sets overscroll-behavior-x: contain on the strip so a swipe that runs
past the last tab stays in the strip instead of becoming the browser's back
gesture.
Tests: scroll-target math in test/tab-overflow.test.ts (runs in CI), plus
five browser regressions in test/mobile/tabs.test.ts covering reveal-on-
select in both directions, scroll preservation across an ambient rebuild,
sessionOrder rendering on phones, and a real touch drag reaching the last
tab.
Closes#257
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The feature as pitched in docs/readmymind-plan.md: pressing the header
brain button predicts the prompt you were about to type, from the case's
intent profile plus everything the session already knows.
Backend:
- readmymind-context.ts: pure budgeted context assembler (9 ranked
sources: pending approval dialog, user goals, last assistant turn tail,
recent prompts, tool activity, git workspace signals, away context,
sibling sessions, rethink state; 30 KB budget, whole-section drop from
the bottom of the ranking, trust tiers stated in the prompt)
- readmymind-collectors.ts: transcript tail reader (the live watcher
keeps only a 500-char snippet) and git signal collection (execFile,
2s timeout, skipped for remote-SSH cases)
- readmymind-predictor.ts: one-shot claude -p in a throwaway tmux
session, opus by default (readMyMindModel setting), strict JSON
contract with 1-3 suggestions (continue / verify / redirect), newline
stripping, 90s timeout; mutable singleton so route tests can stub it
- POST /api/sessions/:id/readmymind: claude-mode only (400), one
prediction in flight per session (409 CONFLICT), rethink body
{ steer, rejected }; ownership via findSessionOrFail
Frontend:
- readmymind-ui.js (loadorder 11.3): header brain button, marker-hidden
until readMyMindEnabled is ON, desktop only (phone key is phase 3);
modal with editable suggestion + rationale and Send / Insert /
Rethink / Dismiss; suggestion text rendered via value/textContent only
and nothing ever auto-sends
- App Settings -> Panels checkbox for readMyMindEnabled; en + zh-CN
strings
Verified end to end against a live isolated instance: transcript
capture, a real opus prediction grounded in the stated goals, rethink
steering, the 409, and the browser modal incl. Insert leaving the text
unsubmitted on the composer. 41 new unit/route tests; full test:ci
sweep green (4680 tests).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The brand "C" got a 44px-wide hit box in the previous commit but was capped at
36px tall by the bar it sits in. The phone header is now 44px, so the one
control that gets you back to the home screen is square at the platform
minimum, and every other header control gains the same 8px.
Redefined as --header-height inside the phone media query rather than as a
literal, so the panels positioned off that token (file browser, project
insights, plan overlays) follow the bar instead of drifting 8px underneath it;
.app's top offset is derived from it for the same reason. The header also stops
top-aligning its children on phones: that read as centred in a 36px bar whose
contents were ~31px, and leaves a visible gap under everything at 44px.
Costs 8px of terminal height on a phone.
Verified on a real isolated instance at 390px: header 44px, button 44x44
spanning the bar, a touch tap at (4,41) - inside the new area, outside the old
one - reaches the home screen, tabs centred, and content still clears the fixed
header. Tablet (48px) and desktop are untouched.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The welcome overlay centers ~560px of content in a ~1400px window, so both
gutters are dead space. The left one now carries the open tabs as a vertical
list (home-sessions.js): one row per live session plus saved web tabs, in TAB
order rather than by urgency, because the row badges are the Alt+1..9 indices.
Clicking a row enters that session.
Working state is deliberately the phone's, exactly: a pulsing green dot ringed
by the same tab-load-spin the tab strip uses while a tab loads, now with a green
halo added on both surfaces so "working" reads identically wherever you see it.
The column is position:absolute so the centered content never moves, which is
why it needs a width gate in two places (HOME_SESSIONS_MIN_WIDTH = 1180 in JS,
a max-width: 1179px media query as the backstop for a resize that outruns the
matchMedia listener). A test pins the two equal. State classification is reused
from mobile-overview.js rather than re-derived, so the two home screens cannot
disagree about what counts as needing you.
Phones keep the mobile overview, and their brand "C" was a 0.85rem inline span,
roughly a 12x13px target on the one control that gets you back to that screen.
It is now a 44px-wide button filling the full header height, with the glyph
scaled to match. 44 is horizontal only: the phone header is pinned to 36px and
clips overflow, so a true 44x44 would mean taking height off the terminal.
Verified end to end against a real isolated instance (own tmux socket + data
dir): 18 browser checks covering render, live update through the tab renderer,
the working dot's animation/glow/ring, row click, the narrow-window gate, the
phone fallback, and a real touch tap on the far corner of the new hit box.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The working dot is the one glance-state a phone needs: busy tabs now get a
9px pulsing dot with a green glow (idle stays 4px). The glow needs !important
because the skin block's no-halo rule outranks mobile.css.
The simple keyboard accessory bar swaps /clear for Tab (/clear and /compact
stay in the extended bar with their double-tap confirm). The tab action now
flushes locally-buffered prompt text to the PTY before sending \t, so
completion applies to what was just typed instead of an empty composer.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
