Rebased over #390, which moved the phone tier's cutoff from 430px to
600px. The palette's compound fold rule now lives in the 600-768px band
mobile.css pads, the cascade samples the palette inside that band, and
the closed iPhone Duo (466pt) is a phone rather than a small tablet while
the open one (626pt) stays a tablet. Comments in both stylesheets, the
device registry, CLAUDE.md and architecture-invariants say 600.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
CLAUDE.md's folding-devices rule gains the two new invariants (a shape change
with the keyboard up baselines to window.innerHeight; a base gutter overridden
by a later @media block needs its own zero-base fold restatement, and a
compound rule written against a mobile.css shorthand is scoped to that band)
plus the architecture-invariants pointer it lacked; the new Folding devices
section there carries the mechanisms and the measurements. The device count
is 138 since the two Duo profiles landed (68 Playwright + 70 custom).
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Three instructions a future contributor would follow literally were stale after
the last review round: the "Adding a CLI" checklist sent the agent-image reason to
AGENT_IMAGE_SPECIAL_CASES, a constant that no longer exists (it is
discovery.install.agentImageLayer on the entry in stock.ts), the trust-boundary
paragraph credited the embedded-commands pin to the invariants test when it is
test/cli-catalog-sync.test.ts, and install.sh claimed "the parity test" pinned the
DeepSeek Harness banner when no test did. That pin now exists: the invariants test
asserts the script's grep literal and the registry's discovery.identity.regex agree
on "DeepSeek Harness", and the comment names it.
docs/docker-cases.md separated the two reasons a CLI stays out of the shared npm
layer (no npmPackage at all versus an agentImageLayer entry), which it had folded
into one, and architecture-invariants no longer lists the agent image's CLI set by
hand.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Follow-up to #390. PHONE_MAX had become 599, an inclusive bound, while
three of its four consumers still read it as exclusive (width < PHONE_MAX
for phone); the one site that switched to <= disagreed with
getDeviceType(). It is 600 again with < at every site. The breakpoint
table in docs/mobile-testing-report.md says 600, and the three 430px
visual baselines are removed: they depict the tablet tier now, and the
visual suite recreates a missing baseline on its next run on the machine
that owns them. device-matrix.test.ts is also run through Prettier, which
the commit hook demanded and the format gate (src/ only) never did.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
`scripts/pr-bot/` was maintainer tooling, not part of the server, the CLI or the
npm package: a Telegram bot that reviews open pull requests in Codeman sessions
and reports to the maintainer. It now lives in its own private repository and
keeps running unchanged, as a client of Codeman's HTTP API like any other.
It moved because it grew a second watcher, for GitHub Discussions, and shipping
that here would mean publishing the briefs it hands its review sessions, the
judgement calls in them and its safety model. None of that helps anyone
installing Codeman, and all of it is easier to change when it is not a public
interface. The move cost nothing structurally: the whole tree depended on one
external package plus Node builtins.
What this removes from the repo, and nothing else: the sources, their three test
files, `config/tsconfig.pr-bot.json`, `docs/pr-bot.md`, the `pr-bot` npm script,
the bot's globs in the typecheck/lint/format scripts, and its knip entry. CLAUDE.md
keeps a short pointer in place of the section, because the bot still constrains
work in here: it takes the `prbot-<n>` and `dscbot-<n>` session names on the local
Codeman, holds clones under `~/.codeman/pr-bot/`, and fetches pull-request heads
into `refs/pr-bot/*` of this checkout, which it must never check out or reset.
The CHANGELOG entries from 1.25.0 and earlier still describe it. That is history
rather than drift, and is left alone.
Verified after the removal: typecheck, lint and format:check clean, and the suite
passes 6843 tests across 357 files, which is the previous run minus exactly the
70 tests that moved out with it.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Measured with both installed: a fresh Claude Code lists `codeman` (the
user-level or per-case copy) and `codeman:codeman` (the plugin). Neither
shadows the other and both work, so this is noise rather than breakage, but
the README, the wiki and the plugin README now say to choose one.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
`.claude-plugin/marketplace.json` at the repo root makes
`/plugin marketplace add Ark0N/Codeman` work, and the one plugin it lists is
the repo itself (`source: "./"`), whose one component is `skills/codeman/`.
So `/plugin install codeman@codeman` is a third install route next to
`npx skills add` and `codeman skill install`, and the skill shows up in the
plugin directories that index Claude Code marketplaces.
Both manifests carry package.json's version: `scripts/sync-plugin-version.mjs`
rewrites them inside `version-packages`, right after `changeset version`, and
`test/plugin-manifest.test.ts` pins the equality, the skill's frontmatter name
(without it the installed skill would be named after a versioned cache dir),
and that no other plugin component (`commands/`, `agents/`, `hooks/`,
`.mcp.json`, `settings.json`) appears at the repo root, since an install would
silently ship it.
Verified with `claude plugin validate` (one expected warning: CLAUDE.md at a
plugin root is not plugin context) and a local marketplace add, install,
details, uninstall cycle against a clean checkout of this commit.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
House style, and these land in the changelog. Only the sentences added in the
previous commit are touched; the em-dashes in contributor text and in the
pre-existing COD-54/COD-115 comments are left alone.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
#409 (Claude truecolor). The changeset becomes the changelog, and its premise
does not hold on tmux 3.2 or newer. Measured here on tmux 3.4: `default-terminal`
sits at its compiled default of `tmux-256color`, a live claude pane reports
`TERM=tmux-256color`, and supports-color reads that as 256 colors, where
rgb(55,55,55) lands on ESC[48;5;237m — visible, just not the color the theme
named. The invisible block the PR describes needs TERM to resolve to a 16-color
entry: tmux older than 3.2, or a ~/.tmux.conf setting `default-terminal screen`,
which Codeman's own tmux server does read (it passes no -f). Both the changeset
and the invariants paragraph now say that, so the next report here gets paired
with the reporter's tmux -V instead of being read as universal. The change itself
stands on the simpler argument: claude was one of two entries not asking for
truecolor while twelve do.
Also reorders buildClaudeEnv(). It applied the registry's unset/exports AFTER the
whole env was built, so a clis.json entry naming CODEMAN_HOOK_SECRET_FILE or PATH
would strip it on the direct-PTY path while the tmux pane kept it — buildEnvExports()
emits `...cliEnv` ahead of `export CODEMAN_MUX=1` and cannot. The block now runs
first and Codeman's own keys are assigned on top, matching the pane.
#404 (Ctrl+Z trap). Adds the missing changeset, and records what the trap does
not cover: an agent CLI already holds its tty with ISIG off (verified on three
live panes: `susp = ^Z -isig -icanon`), so this is defence for the startup window
rather than a fix for the steady state, and two input paths still reach the PTY
unfiltered — the mobile accessory bar's one-shot Ctrl and the CJK textarea.
#399 (path picker sort). The server sorts by name and cuts at 500, so the client
sorting those 500 by date gives "the newest of the first 500 by name", which is
wrong in exactly the >500-entry folder the date sort exists for. The status line
now says "(first 500 by name)" so the cut is legible, with the reasoning parked
on _sortEntries.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
buildClaudeEnv(), the direct-PTY fallback taken when mux creation fails, now
reads getCli('claude').env and applies its unset and exports lists. It used to
delete COLORTERM and CLAUDECODE from a hand-maintained list of its own, which
left it contradicting the registry entry that the tmux pane and the attach
client both read. An engine value needing a mux name has nothing to resolve
against on this path, so it is skipped rather than guessed.
Claude no longer unsets NO_COLOR. The invisible-background bug does not need
it, and unsetting it overrides a preference the user set deliberately, so a
user who exports NO_COLOR globally keeps monochrome panes. The other seven
truecolor CLIs still unset it; that inconsistency is intentional and the
comment on the entry says so.
The invariants doc gains a Terminal colour env paragraph under Session launch
modes, where a reader looking up Claude will find it — the previous sentence
sat under a heading that lists only the non-Claude CLIs. It now says the lists
are the stock catalog and a clis.json override replaces them wholesale, and
that the declarations reach the tmux pane, its attach client and the direct
PTY but not a remote pane, whose command carries no env exports at all. Docker
hands COLORTERM=truecolor to every mode, including the two the registry says
must unset it.
The changeset named six peer CLIs and there are seven: deepseek also exports
truecolor. A test beside the existing OpenCode assertion pins the new
behaviour, so a future registry edit cannot make the backgrounds vanish again
in silence.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude draws the user's own messages as a block of background color, and
inside a Codeman pane that block was invisible. tmux hands each pane
TERM=screen, which supports-color reads as 16 colors, and Claude's registry
entry deleted COLORTERM on top of that. Claude therefore quantized every RGB
color its theme asked for down to the basic palette, where rgb(55, 55, 55)
and every other dark background becomes ESC[40m, the terminal's own black.
Changing the color in a custom Claude theme moved nothing on screen.
Claude now exports COLORTERM=truecolor and unsets NO_COLOR, matching codex,
gemini, antigravity, pi, grok and omp. CLAUDECODE stays unset, because Claude
reads it as a signal that it is running nested inside itself. Both the tmux
session and the attach client read this one registry entry, so they cannot
disagree.
PR #3 introduced the unset in February, citing xterm.js#484 for the claim
that xterm.js mishandles truecolor. xterm.js closed that issue in April 2019,
Codeman now depends on @xterm/xterm 6, and TmuxManager already sets
terminal-overrides ",*:Tc" on its own tmux server, so 24-bit color reaches
the browser today for every CLI that asks for it.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Rebased onto current master (the one real conflict was the import line
in docker-hosts.ts Ark0N flagged; kept both), then addressed every
point from the review:
**1. Rebase.** Done — this branch now sits on current upstream/master.
**2. Agent-image special cases are data now, not an id-keyed table
outside stock.ts.** `AGENT_IMAGE_SPECIAL_CASE_IDS`/`AGENT_IMAGE_SPECIAL_CASES`
are gone. `CliDiscovery.install.agentImageLayer?: { kind: 'dedicated';
reason: string }` is a field on the registry entry itself (pi,
deepseek), `reason` is required by schema.ts, both producers
(docker-hosts.ts and cli-catalog.mjs) filter on its presence instead
of an id, and the coverage test reads it from the generated catalogue.
Also added the npm-package-name validation to the TS producer, which
only the .mjs one had — same SAFE_PACKAGE regex, duplicated
(necessarily, one side can't import the other) and now pinned
byte-identical by a new parity test.
**3. Changeset said five, it's eight.** (Not nine — see the DeepSeek
point below, which changes the true count.) Reworded to state it
structurally rather than pin a number that will go stale again.
Then the four behavior-changing findings:
- **DeepSeek was offered as a normal install option but can't actually
drive a pane.** `npm install -g @deepseek-ai/dsh` installs the
launcher only; DeepSeek ships no profile that can run standalone.
The generator now emits an empty install command for any
`launcherProfile` entry, so install.sh's menu (which requires a
non-empty command) skips it and falls through to its docs URL hint
instead — matching what the old hand-written code did before this
PR replaced it.
- **wget-only hosts lost every automatic install, including the npm
ones that never needed curl.** The menu-building loop now filters
PER ENTRY (only a command starting with `curl ` is held back) rather
than wiping the whole menu when DOWNLOADER != curl.
- **The DISPLAY/TRUSTED split and the catalogue refresh didn't hold up
under review** (refresh's only real write was the label; it ran
before the Node existence check; its own eval-detection test was
tripped by the word "eval'd" in a comment). Dropped entirely per
your own recommendation — embedded catalogue only, no network
fetch, no second array. install-sh-invariants.test.ts now asserts
the refresh/DISPLAY machinery does not exist rather than testing its
internals.
The three take-or-leave items, applied:
- `dsh_banner_probe`'s bash 3.2 empty-array bug: `${runner[@]}` →
`${runner[@]+"${runner[@]}"}`. Verified live in a real `bash:3.2.57`
container with `timeout` removed from PATH — crashed before, clean
now, full `detect_all_clis` path exercised end to end.
- `docker-agent-image-coverage.test.ts` now anchors on each layer's
`<binary> --version` proof line instead of `Dockerfile.includes(binary)`,
which stayed true if a layer were deleted but its comment survived.
- Doc drift: docs/docker-cases.md (four → five, and now describes the
data field), docker/agent.Dockerfile's "other four CLIs" comment (no
longer a magic number — CLI_NPM_PACKAGES is generated and can grow),
CLAUDE.md's install.sh size (104KB → ~112KB) and its stale mention of
the now-dropped refresh.
Verified: tsc clean, prettier clean, the full targeted suite (142
tests across the 8 affected files) green, and the full `npm test` gate
diffed BY TEST NAME against a clean upstream/master baseline run on
this same machine — identical 201-name failure set both sides (168
tests / 67 files, all pre-existing Windows-environment noise: symlinks,
PTY spawning, POSIX permission bits — none of it touching anything
this PR changes), zero new failures either side of the diff.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01R9ZSTEenc8soSu9bTi8Xru
Adds a "Consumers outside the server" section covering the two generated
artifacts, why each exists (neither install.sh nor a .mjs can import
TypeScript), what is deliberately NOT exported and why, the three-rule install
command trust boundary, and the bash 3.2 constraint with the offset/length
window shape it forces.
The adding-a-CLI checklist gains the regenerate step, since forgetting it is how
the installer would keep detecting the old set while the server offers the new
one — the drift this change removes, one level out.
docs/docker-cases.md gains how CLI_NPM_PACKAGES is derived, why it reads the
stock catalogue and not the merged registry, and a table of the four documented
Dockerfile special cases with their reasons. CLAUDE.md gains a command row and
names the generated block, the bash 3.2 rule and the trust boundary in its
install.sh paragraph.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_015EMxQreQUZX5ZyybxAGh12
A Fable 5.1 reviewer read the whole release diff against 1.26.2 and returned
SHIP WITH FIXES. These are its findings, verified before acting on each.
**The changelog advertised a feature the code refuses (major).** The #401
changeset and docs/web-tabs.md both listed `*.localhost` in the loopback set.
The follow-up in 02b0e278 moved it out of the auto-route set on security
grounds and updated CLAUDE.md but neither of those, and that changeset becomes
the 1.27.0 CHANGELOG entry: a user would have read the release notes, tapped
`http://app.localhost:3000/` on a phone and got a connection error from a
documented feature. Both corrected, and the user guide now says why it is
excluded and that adding such a dashboard by hand still works.
**Dictation delivered its text twice (minor, #388).** `keydownSnapshot` started
`null`, so `keydownSnapshot ?? canonicalCount` at the input event read a counter
xterm had ALREADY bumped: on a fresh page load with no keydown yet, xterm's own
capture listener forwards the `insertText` itself (it is not gated behind a
keydown), then the snapshot equals the bumped count, `count > snapshot` is
false, and the controller emits the same text again. Reproduced directly
against the module: it emitted `hello` for input xterm had already delivered.
A `0` baseline restores that file's own invariant, that a missed recovery is
acceptable and a duplicated keystroke is not. Two regression tests, covering
both the xterm-already-delivered and genuinely-dropped halves.
**The sorted rail's arrow-key walk followed the DOM (minor).** `_tabKeydownHandler`
steps `querySelectorAll` order, which is `sessionOrder`, while a sorted rail
paints its rows with the flex `order` property, so ArrowDown from the top card
landed wherever that session happened to sit in the tab order. It now sorts its
node list by the COMPUTED order first: computed rather than inline, because web
tabs take their `order: 9999` from CSS and would otherwise read as 0 and lead
the walk. This is the one place that follows the paint; the Alt+N badge, the
drag model and the filter all still deliberately read the DOM.
**A trusted dashboard was auto-reused by a tapped link (minor, #401).** The
reuse loop skipped `managed` and direct-mode records but not `trusted`. A
trusted frame is mounted with `allow-same-origin`, i.e. on Codeman's origin
with the user's cookie, and these links come from agent output, which is the
threat model the loopback allowlist was just narrowed for. An agent that can
write into the dev server's tree could print a path that one tap opens inside
that privileged frame. Excluded from auto-reuse, with a test; opening it from
the Run dropdown is still an explicit action and unchanged.
**Two documentation claims that were no longer true.** CLAUDE.md said
test/location-overlay-commands.test.ts pins every remote pane command, but
remote claude and remote omp now have their own arm in `buildRemoteLaunchCommand`
and never reach `defaultRemoteCommandForMode`, which is what that test asserts,
so it pins nothing for them and changing either arm will not fail it. Named the
real pins instead. Also documented the arrow-key-walk exception in the rail
paragraph.
Left as follow-ups, deliberately: `POST /api/webviews` does not dedupe by URL
server-side, so two devices tapping one link concurrently can still save two
dashboards for one origin (pre-existing endpoint behaviour that #401 makes
reachable by a tap), and the location-overlay golden should assert the real
remote claude/omp commands rather than a branch neither reaches.
Full gate green: 359 files, 6869 tests.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Each item is from the pre-merge review of the PR it names, applied on master
rather than by pushing to a contributor branch.
#400 (response viewer, shenlvkang-collab)
- The brief view opened at `scrollTop = 0`, right when it was a single card
holding the last row. Now that it renders the whole turn, the top is the
turn's first narration line and the answer can be screens below it, while
loadFullContext already scrolls to the bottom of the same turn. A multi-row
turn now opens at its newest text; a single card still opens at the top.
#401 (loopback links as web tabs, shenlvkang-collab)
- Drop `*.localhost` from the auto-route set. Every other member is an address
literal that can only mean this box; a `*.localhost` DNS name is not one, and
a resolver with a search domain retries `evil.localhost` as
`evil.localhost.<search domain>`. The link source is agent-written terminal
output, so that set is the whole confinement on a tap that makes Codeman
fetch a URL server-side and persist it. The page-side test stays broader
(`isOnBoxHostname`), where a false positive only declines to proxy.
- A link to the origin root navigated nothing: the path was flattened to '',
which openWebview reads as "no deep link", leaving an open frame where it was.
- `this.webviews` being set does not mean it is loaded. initWebviews() assigns a
truthy empty map and only then awaits the list, so a tap during page load
found nothing to reuse and POSTed a duplicate record. Join the in-flight
refresh instead.
- One dashboard per dev server rather than per host spelling, which is what the
method's own comment already promised.
- Toast on the auto-create: it writes webviews.json, broadcasts over SSE and
adds a Run-dropdown row on every signed-in device, with a new tab as its only
previous signal.
#362 (remote omp continuation, timkjr)
- Accept the allowlisted `mode === 'omp'` arm as-is; a blanket registry render
would hand deepseek a locally-resolved --profile and bypass claude's own
overlay. A registry-declared switch is the follow-up if a third mode needs it.
- Revert the whole-file Prettier reformat of docs/remote-sessions.md (docs/ is
hand-formatted and outside `npm run format`), keeping only the two new
sections.
- Correct three stale passages: architecture-invariants' `exec claude
--dangerously-skip-permissions`, the `exec <cli>` paragraph (claude and omp
now have their own arms, and the claude pane's PID is the login shell), and
omp-integration's `-c 'omp'`. RemoteCommandMode gains deepseek and omp.
- Add the missing `_maybeCaptureOmpSessionId` remote-guard test; the sibling
guard in `_pinOmpRespawnId` had one and this path runs earlier, on the first
idle turn.
#388 (keyCode 229 recovery, aakhter)
- Gate notifyCanonicalData on shouldSuppressTerminalQueryResponse and
isTerminalFocusOrMouseReport. onData also carries the DA/DSR/CPR/OSC replies
xterm answers during Ink redraws and its SGR mouse and focus reports; any of
those landing between the keydown and the candidate's resolution was read as
"xterm spoke for this keystroke", standing the recovery down and leaving the
character dropped, worst on a busy agent pane. Reached through
window.CodemanTerminalInput: the predicates live in a module IIFE that closes
long before this call site, so bare references would throw into the
surrounding try/catch and stop the notify from ever running.
Every fix has a test that fails without it (verified by reverting each).
Full gate green on the combined tree: 358 files, 6849 tests.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
An agent prints `http://localhost:5173/` (a dev server, a preview it just
served) and the user taps it on a phone. That address only exists on the
Codeman box, so the link was a guaranteed connection error from any other
device — while the web-tab proxy fetches from the server, where it works.
A loopback link (`localhost`, `*.localhost`, 127/8, 0.0.0.0, ::1) activated
in the terminal or clicked in the Response Viewer now opens as a proxied
web tab whenever the Codeman page itself is not on that box. A saved
proxied dashboard on the same origin is reused, with the link's own path,
query and fragment opened inside it (a mounted frame is navigated, not torn
down, so its state survives); otherwise one is saved under its host:port,
sandboxed like any other web tab, so it is in the Run dropdown next time.
Only loopback is routed this way. A LAN or tailnet address may well be
reachable from the device (a VPN, the same Wi-Fi) and a direct open is the
cheaper, richer path, so those keep opening in a new browser tab; on the
box itself every link opens directly. The terminal link provider and the
viewer's click handler consult one hook and fall through to their existing
behaviour when it declines.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01McLWqCWBuQYGuPMScb4Aou
The eye button rendered `data.text`, which is one row: the last assistant
row of the transcript. A Claude answer is a median of 3 model messages
(p90 11) split around tool calls, so the brief view usually showed the tail
of an answer ("Done.", "Let me look.") and the substance appeared only after
More. The full view was fine, which is why the brief one read as broken by
comparison.
The brief view now asks `?context=turn`. The reader answers with the
assistant messages of the last ANSWERED turn (`selectLastAnsweredTurn`: the
highest `turn` that has an assistant row, so a prompt queued after the
answer does not blank the view) and the frontend renders them exactly as
the full view renders that turn: one badge, then continuation segments,
gated on the numeric `turn` as before.
`data.text` is unchanged in every context — still the last assistant row,
never `messages.at(-1)` — because agent pollers hash it. Readers that emit
no turns (Codex, the pane parser, DeepSeek, an older server) return `text`
only for `context=turn`, and the brief view keeps its single card for them.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01McLWqCWBuQYGuPMScb4Aou
The picker's current-folder line was a read-only breadcrumb, so reaching a
deep folder meant tapping through every level, and the listing was fixed to
name order, so the file an agent had just written was somewhere in a
500-entry list.
The current folder is now an editable field: Enter or Go jumps there, a full
file path lands in its folder with that file selected, and a path that does
not resolve keeps the listing you had and says so, instead of the reset to
the root that a stale initialPath gets. A Sort control orders the listing by
name or modified time in either direction, folders always first, and the
choice is remembered per device like the hidden toggle. Each entry shows a
compact modified time (time of day today, month-day this year, else the
date).
GET /api/filesystem/browse stamps every entry with mtimeMs to make that
possible; the stat that already fetched a file's size now serves both, so
it is still one stat per entry. Entries without an mtime (an older server,
the in-container listing) sort after dated ones and then by name.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01McLWqCWBuQYGuPMScb4Aou
The 50MB cap on file-raw, the attachment /raw route and /api/download was
memory protection for a `readFile()` that no longer exists: file-raw and
/raw were rewritten to stream through `sendFileBody()` and answer Range
requests, so size costs a read stream rather than RSS (measured: a 600MB
download moved peak RSS by ~37MB). All the cap still did was refuse
legitimate downloads of build artifacts, videos and archives.
It is now MAX_FILE_DOWNLOAD_BYTES in config/buffer-limits.ts, default 2GB,
env CODEMAN_MAX_DOWNLOAD_BYTES, 0 = unlimited. `parseByteLimitEnv()` is
separate from the `parseInt(...) || default` idiom used elsewhere in that
file precisely because that idiom reads 0 as falsy and would silently
restore the default for the one value that means "no limit".
/api/download was the last route that really did buffer the whole file. It
now shares sendFileBody() with the other two, so it streams, advertises
Accept-Ranges, and is resumable. Its Content-Disposition also goes through
buildContentDisposition() rather than raw interpolation.
Refusals move from 400 to 413 across all three, which is the correct status
for the case; with the cap at 2GB it is a path almost nothing reaches now.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Review of the previous commit found the guard inverted: the three skips keyed
on `?full=1`, which is only what the client asked for. When the capture comes
back null — ENOBUFS, a timeout, a vanished pane, or a session with no mux at
all — the reply falls back to the byte history, which IS a stream of
successive frames and still needs stripping. Gating on the request returned it
whole: measured at 82KB against 4KB for the same buffer without `full=1`. A
direct-PTY session takes that path on every first selection, not only during
an outage. The skips now key on `isFullCapture`, meaning a capture arrived.
Three further defects the same review surfaced, all on this path:
Keeping the trailing rows is only sound when a cursor move follows to count
back up from them. On the two branches where the cursor query fails there is
no move, so the caret was left at the bottom of the pane — worse than before.
The cursor is now read first and settles both decisions together.
The move is relative rather than absolute. `CUP` numbers rows from the top of
the browser's screen, so it is only right while the browser's row count equals
the pane's, and `resizeWindow` does not wait for tmux, so a capture can be
taken before a requested resize applies. Measured against real tmux with a
browser four rows shorter than the pane: the absolute move lands on a blank
row, the relative one lands on the caret's row.
An all-blank pane no longer reads as content. Retaining trailing rows and
appending a move made it non-empty, and the caller treats non-empty as "replay
this", so a blank screen would have replaced real history — the downgrade
`_replayWouldShrinkBuffer` refuses, arriving from the server side where that
guard cannot see it.
The documentation claimed one line per screen row. `-J` joins a hard-wrapped
row into its logical line, so that is false whenever any row wrapped: measured
at 10 lines for a 12-row pane. Both entries now say what actually holds, and
the stale "NOT repositioned" contract in the mux interface is updated too.
Tests: the byte-history fallback is stripped, an empty capture leaves history
intact, and the extracted helpers are unit-tested directly rather than through
source-text matching. The slice window in the capture test is bounded at the
next method, having overrun into its neighbours.
Switching to a session left the caret one row below the composer's input
line, on the box border, and every cursor-relative update the CLI sent
afterwards was measured from the wrong row. Any fresh output repaired it,
because the CLI then repainted the whole frame.
Two things were wrong with the full-history replay, and they compound.
The capture never restored the cursor. The visible-frame path ends with an
absolute cursor move back to the pane's position; the linear path returned
its text and left the caret wherever the last character landed, which for an
agent CLI is the bottom-most row carrying text — the status line.
The rows it addressed did not line up with the pane's rows either. Four
transforms ran over the capture and each can delete a line: the trailing
blank rows were stripped, redraw-bloat stripping ran, the trim that cuts
everything above the Claude banner ran, and leading whitespace was removed.
All four are right for a byte stream of successive frames. A capture is the
rendered pane, one line per screen row, so each deletion shifted the frame
out from under the restored cursor.
The full-history path now appends the pane's own cursor position and keeps
every row, so row N of the reply is row N of the pane. The visible-frame and
tail paths are untouched.
Restoring the cursor is what makes row alignment load-bearing here, and
neither CLAUDE.md nor the architecture invariants said so — which is how
four line-deleting transforms accumulated on the path. Both now record it.
Verified against a live 315x59 pane: the reply carries 59 rows, its row 55
is the composer's input line matching tmux, and it ends with the cursor move
that lands there.
Claude Code answers an exhausted model budget INSIDE the turn ("You've
reached your Fable limit. Run /usage-credits to continue or switch models
with /model.") and then sits there with nothing to write. The reviewer never
produces a report, so `runTurn` waited out its full 40-minute deadline and
reported a bare "timed out after 40 min without a report", which reads as a
hung reviewer rather than an account that needs attention.
Measured on 2026-09-08: #388, #393, #394 and #377 each lost 40 minutes this
way, and because every attempt counted, all four reached MAX_AUTO_RETRIES and
would NOT have been picked up again once the budget returned. One spent
afternoon quietly took the whole queue out of service.
`findModelLimitNotice()` reads the notice off the pane and `runTurn` returns
a new `limit` outcome instead of waiting. It is consulted in exactly two
places, both of which mean "the turn produced nothing": on a stop where
`isDone()` is still false, and on each timed-out wait slice. A review that
merely discusses usage limits in its own findings therefore cannot be
mistaken for one that hit the wall, and the pattern matches neither the model
name nor a straight apostrophe, since the pane renders a typographic one and
every model prints the same sentence.
A spent budget is an account condition, not a bad PR, so it no longer spends
the per-head retry budget: the queue resumes by itself when the budget does.
Telegram now names the cause and the file to change.
Tests use the pane captured verbatim off the run that lost the 40 minutes.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Ctrl+V in the terminal inserted the clipboard text twice. Right-click →
Paste inserted it once.
`_handleImagePaste()` appends a hidden contenteditable div, focuses it, and
reads the clipboard out of the paste event that lands there. Two separate
routes deliver that event for a single keypress. The function issues
`document.execCommand('paste')` itself, which in Firefox dispatches a
trusted paste event and then returns false, because the trap cancels the
event and the command never completes; Chromium and WebKit refuse that
command and dispatch nothing. The keydown's own default action delivers the
other, because xterm calls the custom key handler before its own `cancel()`,
so returning false never calls preventDefault. Firefox therefore ran the
trap's listener twice and both runs reached `terminal.paste()`. The
context-menu paste involves no keydown at all, which is why that path stayed
correct.
The trap now accepts the first paste event and cancels every later one, so
how many paste events a browser delivers no longer changes what the PTY
sees. Measured on a live install, one Ctrl+V each: Firefox two events and
two writes before this change, Chromium and WebKit one and one, and every
engine one write after it.
The `execCommand('paste')` call stays. Stripping it out also ends the
doubling, and all three engines still deliver one event without it, since
`trap.focus()` has already run when the key's default action resolves. It is
kept because the trap technique arrived in #84 for plain HTTP and for
mobile, and a desktop measurement says nothing about real iOS Safari or
Android Chrome: where a browser aims the default action at the element
focused when the keydown began, the command is the only route into the trap,
and the trap is the only place clipboard image blobs are read.
test/image-paste-trap.test.ts loads image-input.js into a `node:vm` context
with a fake document and fires two paste events at the trap. It covers text
and images, and fails on the old code with the text pasted twice and the
image uploaded twice.
Docs: the invariant goes into docs/architecture-invariants.md as a Terminal
paste section and into CLAUDE.md as a Frontend entry, both recording the
measured event counts and why the redundant call is still there. README.md
and the Keyboard Shortcuts and Input and Voice wiki pages gain a Ctrl+V row,
which all three tables were missing while listing every other clipboard
binding.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
- Remote omp command now renders through buildSpawnCommandFromRegistry
(the mode-agnostic engine local/docker spawns use) instead of the
buildOmpCommand() the CLI-registry refactor deleted.
- Session._pinOmpRespawnId()/_maybeCaptureOmpSessionId() now skip
host-local ~/.omp resolution entirely for a remote session and fall
back to --continue: that resolver only ever reads THIS host's
filesystem, which is meaningless (and could wrongly alias an
unrelated local conversation) for a conversation that lives on the
remote host.
- Remote-claude launch now honors an explicit resumeSessionId distinct
from sessionId (mirrors claudeDockerPaneCommand's shape), and
validates sessionId the same way that sibling does before
interpolating it into the remote shell command.
- Add the still-missing header-cwd half of the trailing-slash test,
and document respawn/reattach continuation + auto-reconnect-vs-
clean-exit in docs/remote-sessions.md.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
#386 made Codex conversations resumable from Past Sessions, and
resumeMobileOverviewSession() correctly passes row.resumeId on to
resumeHistorySession(). The phone's own row projection never copied the
field off the unified-list item though, so row.resumeId was always
undefined there and a tapped Codex row started a FRESH session on a thread
that was already on disk. The desktop path worked; only the phone was blind.
The test fails without the projection line, and pins the other half too: a
claude row must not grow a resumeId, since the field is what distinguishes
"resume this conversation" from "start a new one".
Docs: CLAUDE.md and architecture-invariants both still described the unified
list as merging Claude transcript files. It has been three stores since this
PR (Claude's ~/.claude/projects, omp's ~/.omp/agent/sessions, codex's
~/.codex/sessions), the alias field keeps its Claude-era name without being
Claude-only, and the scanner-only rule behind resumeId was written down
nowhere.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
#385 made the composer glyph and the working status line per-CLI registry
data, which is right, but `workingLine` arrived as a config-supplied regex
validated with a bare `new RegExp()`. That skips `compileVersionRegex()`,
the helper the registry uses for exactly this: a `~/.codeman/clis.json`
override can set the field, the compiled pattern is run against every
accumulated PTY chunk and every pane capture, and a nested quantifier there
backtracks on the event loop for the whole server rather than one session.
Route it through the helper in both places, which are not redundant: the
schema refine rejects the entry at LOAD time so a bad pattern never reaches
a session, and `_workingLinePattern()` compiles through the same helper so
the runtime cannot hold a pattern the schema would have refused. The helper
returns null instead of throwing, so the Claude-pattern fallback stops being
a try/catch and becomes structural. Both shipped patterns compile unchanged,
and Claude's is behaviourally identical to CLAUDE_WORKING_LINE_PATTERN.
Also match the Codex footer case-insensitively on the E. It was
characterised against codex-cli 0.152.1, which prints a lowercase `esc`;
a version capitalising it would make the whole fix silently inert, since
the pane would simply never look like it was working.
Docs: CLAUDE.md, architecture-invariants and cli-registry.md all still
stated the Claude-mode-only rule this PR retires, and none of them named
the new capability or the regex guard.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The two merge-time edits the #383 review asked for. The comment above the
picker's fallback chain said Home is nested under Codeman Cases; on the
native default it is the other way round (~/codeman-cases sits inside ~).
And the "Filesystem path picker" paragraph in architecture-invariants still
said the picker falls back to /mnt/d, which #383 changed to: the session's
Current Folder, then the Codeman Cases root, then /mnt/d, then the first
root. No code behaviour changes.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Maintainer tooling in scripts/pr-bot/: a daemon (systemd user unit
codeman-pr-bot) that lists open PRs with gh, reviews each head commit once in
a Codeman claude session (`prbot-<n>`) running in a private `git clone
--shared`, and sends the verdict, ranked findings, checks and a recommendation
to Telegram with action buttons. Merge, close, post-comment and approve-CI
happen only from a Telegram command or button plus a confirmation tap; the
bot never writes to GitHub on its own. The Telegram token and chat id come
from the existing notifier bot's env file.
Verified live: three PRs reviewed end to end (383, 363, 368), reports
delivered with buttons, reviewer sessions on the pinned model. Findings
along the way, each fixed and documented: a linked worktree inherits the
main checkout's model pin (hence the shared clone), undici's 5-minute header
timeout cut off the first review, gh was missing from the service PATH, and
the periodic scan orphaned an in-flight review's record.
typecheck/lint/format now cover scripts/pr-bot; tests in
test/pr-bot-{report,state,commands}.test.ts; guide in docs/pr-bot.md.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Review follow-ups to #357. Each is a path that still touched, or still hid, a
container Codeman does not own.
**Export still mutated it.** The four fail-closed layers cover create/start/
stop/remove, but `POST /api/docker-cases/:name/export` reaches the container
twice through neither: a full export `docker commit`s it, and even a
workspace-only export `docker pause`s it first for snapshot consistency. Pause
freezes the owner's processes for as long as the tar takes, on a container we
promised not to touch. Full export is refused for an adopted case (it packages
someone else's container, with their logins, into a bundle Codeman hands out);
workspace-only keeps working and no longer pauses, accepting a live filesystem
the way `tar` does on any running host directory.
**A freshly linked OWNED case became unusable.** The run menu now probes the
container for its CLIs, and a failed probe hides every agent mode behind the
reason. For an adopted case that is right. For an owned one the container does
not exist until the first session launches it, so every newly linked Docker case
answered `container "codeman-case-x" not found (adoption never creates a
container — start it yourself first)` and offered nothing but Shell, for a
container the launch chain was about to create itself. A failed probe is
recorded only when the case is adopted; `CaseInfo.docker.owned` is on the wire
so the frontend can tell them apart. Verified in a browser: owned-with-no-
container offers all ten modes and no notice, adopted-but-stopped offers Shell
and says why.
**Multi-user gating.** Adoption is admin-only, unlike `docker-link` beside it.
Linking creates OUR container, whose sole bind mount `isWorkingDirAllowed` has
already confined to the caller's space; an adopted container's mounts are
whatever its owner gave it, so one mounting `/` hands the adopter a shell over
the whole host — exactly the workspace scoping multi-user mode exists to
enforce. Listing the engine's containers and browsing directories inside an
arbitrary one are machine-level reads and follow the docker-HOST policy for the
same reason. The preflight is deliberately not admin-only: the run menu fires it
for every docker case, so it admits a non-admin for a container already linked
to a case they can access, and nothing else.
Verified end to end against a real pre-existing root container (alpine + tmux,
no bind mounts): adopt, claude session inside it, workspace export, session
close and case unlink all left `StartedAt`, `RestartCount`, `Pid` and `Paused`
untouched; the pane ran the CONTAINER's claude, without
`--dangerously-skip-permissions`; a stopped container was refused at both
preflight and launch and was never started.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01TecFD9hvPYJ1mkkMtBQbT1
feat(docker): attach a case to an already-running container
Conflicts came from work that landed after the PR was opened, and each is
resolved onto the newer abstraction rather than by keeping the older code:
- `defaultDockerCommandForMode` is registry-driven since #347, so the PR's
`runsAsRoot` arm became `overlays.docker.rootCommand` (claude only). Claude
Code still refuses `--dangerously-skip-permissions` as root in 2.1.261 and the
refusal is visible only inside the container, so an adopted root container
otherwise just shows a dead pane. Which flag to drop is a per-CLI fact, and
`test/cli-registry-no-id-branching.test.ts` forbids expressing it as a branch.
- The probe's mode list and its mode -> binary table both duplicated the
registry. They now read `enabledCliIds()` / `discovery.binaries[0]`, which is
also what fixes the merge's silent regression: the hand-written list predates
`omp`, and the run menu gates every docker case on this probe, so owned
containers would have lost that mode. `shell` needs no arm — it declares no
binary, so it is dropped from the lookup and reported available regardless.
- The per-mode `mode === 'claude' && !cliDir` chain in `tmux-manager.ts` is one
`missingCliMessage(mode)` gate since #347; the PR's docker exemption moved onto
it. Its test now pins the single gate instead of counting seven arms.
- The create arm keeps #349's swap-limit warning filter, which the adopted arm
never reaches; the run-mode list gains `omp` from #353.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01TecFD9hvPYJ1mkkMtBQbT1
Codeman can now be mounted under a sub-path behind a reverse proxy that
forwards the prefix unchanged (e.g. https://host/codeman/). Default is `/`
(root), which is byte-identical to the historical behavior.
Design — few choke points, mirrored ingress/egress:
- src/config/base-path.ts: pure single-source normalize/validate/join/strip.
- Server ingress: stripBasePath() inside Fastify rewriteUrl, so routes stay
declared prefix-agnostic; un-prefixed requests (hooks, health, docker bridge
hitting the raw port) pass through unchanged.
- Server egress: one onSend hook prepends the base to root-absolute Location
headers (covers all redirects).
- HTML: renderIndexHtml points <base href> at the mount and injects
window.__CODEMAN_BASE__ — ONLY when a base is set (inert at root).
- Frontend runtime URLs: CodemanBase.url() route builder in constants.js,
applied transparently by a fetch wrapper and explicitly at the
EventSource/WebSocket/window.open/<img|iframe|a>-src sites.
- sw.js derives its base from self.location; manifest uses relative start_url/scope.
- Web-tab proxy: proxyPrefixFor(cap, basePath) is the single base-aware root that
cascades to the injected <base>, HTML/attr rewrites, runtimeUrlShim, Set-Cookie
Path and Location; capabilityFromReferer strips the base off the browser Referer,
while the ingress parsers stay base-agnostic (rewriteUrl already stripped it).
--base-url rides the daemon relaunch (buildWebArgs) and the service unit
(resolveServicePlan). constants.js is guarded against a missing `window` for
isolated unit-test contexts.
Tests: test/base-path.test.ts (pure helpers), base-path coverage in
webview-proxy/render-index-html/daemon-control; CodemanBase stubbed in the
vm-isolated panels-ui test contexts. Docs: Remote-Access.md (sub-path section +
nginx example), security-architecture.md env table, CLAUDE.md pattern.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01XUkPBxbumnct6qSrx4JDju
#373 restarts the Compose container by exiting the server, which is right for
the shipped deployment: `restart: unless-stopped` relaunches it. The updater
verified that policy through the Docker socket and, when it could not (no
socket mounted), failed open and exited anyway. Failing open is the correct
choice for the GATE, where refusing would block every install without a
socket, but not for the kill: a container the daemon does not restart goes
down for good, with no UI left to recover it from. That is exactly the case a
plain `docker run` of this image without `--restart` produces, and the image
sets CODEMAN_IN_CONTAINER=1 itself, so it takes the container path.
The decision now happens server-side, where both the socket and the Compose
env are reachable, and rides down to the script as `--restart-by-exit 0|1`.
It is 1 when the Compose file declared `CODEMAN_RESTART_BY_EXIT=1` (added there
and only there, since that file is what sets the restart policy; the image ENV
deliberately does not) or when the daemon confirmed an auto-restart policy.
Otherwise the build still lands, the status becomes
`completed-needs-manual-restart` with the `docker restart` hint, and the
server keeps running. The shipped deployment is unchanged in effect: with the
socket it was already confirmed, and without it the declaration now covers it.
Also: a root-run `Start-Codeman.sh` (common on Unraid) created the
fingerprint baseline's `.codeman` directory before the container's first start
and left it root-owned, which the unprivileged server could then never write
its own state into. It is chowned to PUID:PGID when running as root.
Verified with a real image build of the merged tree (classic builder; this
box's BuildKit lacks buildx): runs as uid 1000, tsc/esbuild and the toolchain
present, the four CLIs at their pins, docker/.env absent, and `docker inspect
$HOSTNAME` returns the restart policy through the mounted socket as that user.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Qg6bcATm1pNNY4kQWGwzgu
The loader refuses a `clis.json` with any group/world permission bit, read bits
included, so a file created with a normal umask (0644) is ignored. That is a
defensible posture for a file that chooses the binaries Codeman spawns, but two
things around it made the override feature look dead: the warning said
"group/world-writable", which a 0644 file is not, and `LoadResult.warnings` was
returned to a caller nobody wired up, so nothing anywhere printed it. A user
following the docs got silence.
The message now names the rule and the command that satisfies it, the loader
logs every warning once on first load (the result is memoized, so once per
process), the module header stops claiming that nothing ever writes (the
quarantine rename of a malformed file is a write, on first use) and the
registry doc gains a short section on the override file with the 0600
requirement in it. Whether the check should relax to writable bits only is a
separate decision; this keeps the shipped behaviour and makes it visible.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Qg6bcATm1pNNY4kQWGwzgu
Codeman running under docker/docker-compose.yaml lost the ability to update
itself from App Settings -> Updates. The image had no .git (excluded by
.dockerignore), so the install reported as "unknown"; there was no init system
for detectSupervisor() to find; the runtime stage had neither devDependencies
nor a build toolchain; and a pull into the baked /opt/codeman would have landed
in the container's writable layer and been discarded by the next `up`.
Restore it through configuration rather than a second updater, so the release
channel, auto-stash, status file and boot reconcile are all reused unchanged:
- The checkout Compose builds from is bind-mounted over /opt/codeman, so the
update's git checkout and rebuild land on the host and survive recreation.
- The restart is the server exiting; `restart: unless-stopped` relaunches the
container on the new dist/. This is the one supervisor whose updater does NOT
outlive the restart, which is safe only because the terminal "restarting"
marker is written first.
- node_modules and dist are named volumes over the bind mount, so
container-compiled native modules never enter the host checkout.
- The runtime image keeps devDependencies and gains python3/make/g++, since
`npm run build` is tsc + esbuild and node-pty has no Linux prebuild.
An in-place container update applies code only, because a restart reuses the
existing image and config. evaluateEnvironmentGate() reads the target release's
own files with `git show <tag>:<path>` and refuses when server.Dockerfile or
docker-compose.yaml changed, when .env.example gained keys the user's .env
lacks, or when the restart policy would not bring the container back. The
missing-key check matters most: Compose resolves an unset ${VAR} to the empty
string and starts anyway, so a new required setting would otherwise arrive as a
silently blank variable. Every unknown fails open, and the gate is re-evaluated
server-side on POST /api/system/update.
The four global agent CLIs are pinned, because an unpinned CLI bump is the one
environment change no diff-derived gate can see; pinning turns it into a
Dockerfile change the gate already detects.
Adds test/docker-compose-env-parity.test.ts as the merge-side guard (every
compose ${VAR} has an .env.example entry and the reverse) and
test/docker-self-update.test.ts for the pure gate decisions.
Documented in docs/docker-self-update.md.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_013yAQ2y9t81jzSfpStUxx5T
Review item 4 named THREE live tables duplicating registry data. Two are now
read from the entry (`defaultRemoteCommandForMode`, `defaultDockerCommandForMode`);
the third, `resolveDockerCredentialArtifacts`, is not — and it was left neither
wired nor annotated, which is the state that item explicitly rules out.
It is not wired because the shape cannot express the live table: `credStore` is
ONE store per CLI, and `CRED_STORES` needs two for gemini (`.gemini` for the
CLI's own auth plus `.config/gcloud` for Vertex), while deepseek's entry declares
none at all even though `.dsh` is seeded. Wiring it means making the field an
array and correcting those two entries — a change to credential seeding, which
is at once the worst thing in that file to get wrong and the least covered by
tests, since every docker IO path is no-op'd under vitest. It belongs in its own
change, measured against a real container.
So it is annotated instead, at the field, in the type's declared-for-later
header, in docs/cli-registry.md, and in the pinned DECLARED_FOR_LATER list — the
last of which means wiring it later makes a test fail rather than leaving a
stale comment behind.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01WQkoi1cNegqVwZHgzx5SbJ
Every run mode is now a `CliEntry` in `src/config/cli-registry/` — discovery
(search dirs, version + identity probes), the launch argv template, env
handling, the `capabilities` flags that replace per-CLI branching, and the
`overlays` that back the remote/docker pane commands. Code that used to ask
"which CLI is this?" reads the entry instead.
Behaviour is unchanged. `test/cli-registry-spawn-golden.test.ts` pins every
spawn command as a literal string, captured from the hand-written builders
before they were deleted, and `test/location-overlay-commands.test.ts` does the
same for all 20 remote and in-container pane commands.
Config can never contain shell text: an entry declares typed argv tokens,
literals are validated against a safe-word pattern at LOAD time (a bad literal
rejects the whole entry — a silently dropped `--no-approve` is not cosmetic),
and values resolve through patterns NAMED in code, so a user `clis.json` cannot
widen its own validation. `~/.codeman/clis.json` overrides any entry, read-only
in this release.
OMP is included as a registry entry rather than a tenth hand-written builder,
so `buildOmpCommand()`, the omp availability pre-flight, the omp arm of
`buildPathExport()` and the omp entries in the truecolor/NO_COLOR, alt-screen
and doctor ladders all drop out.
Guard rails:
- `test/cli-registry-no-id-branching.test.ts` fails the build if per-CLI-id
branching reappears outside `stock.ts`, in any of its four shapes (`===`,
`!==`, `switch`/`case`, `includes`) — an `===`-only version would miss the
negated forms, which is how 36 of them survived an earlier pass. Every
allowlisted branch carries its reason.
- `external`, `hooks` and `altScreen` stay three INDEPENDENT capabilities;
deriving one from another shipped the `until=stop`-hangs-on-shell bug.
- `param` is two namespaces. `launch.params` keys, `configSetenv.fromParam` and
`privilegedParams[].param` all name a LAUNCH param; the legacy `<Mode>Config`
wire field is separate, bridged only by `legacyConfigAliases`. Getting
`privilegedParams[].param` wrong is SILENT — it is the multi-user bypass
clamp's only handle on a CLI's privilege switch, and a wrong name clamps
nothing with no error and no failing test — so `schema.ts` rejects an entry
naming a param it never declared.
- Registry data resolves AT CALL TIME (`sessionModeSchema()`,
`allowedEnvPrefixes()`, `dependencyRegistry()`, the resolvers' `searchDirs`
thunks). A module-level const freezes at first import, so a CLI enabled while
the server ran moved the run menu but not that surface.
- Six fields are annotated DECLARED-FOR-LATER and read by nothing
(`shortBadge`, `accent`, `capabilities.echo`/`wheelForward`/
`keyboardAccessory`/`maxFrameBytes`): all frontend behaviour, transcribed
rather than measured. A test pins the list so it cannot quietly grow.
Three user-visible changes, all deliberate and named:
- `probeDockerCliVersion()` derives the in-container binary from the registry
rather than assuming it equals the mode name (`antigravity` runs `agy`).
- The remote CLI version probe now covers grok and deepseek, which the
hardcoded map it replaces omitted while its own comment said the rule was
"every mode except shell".
- `codeman doctor`'s CLI rows are generated from the entries, so Claude's
install hint is the install command rather than a docs URL, five CLIs gain
hints they never had, and the row order follows the catalog.
Also hardened along the way: `sessionModeSchema()` is bounded at 24 chars
(matching the `cliId` pattern) before its failure message quotes the value
back, and `deepMerge` skips `__proto__`/`constructor`/`prototype` when reading
the hand-editable `clis.json`.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01WQkoi1cNegqVwZHgzx5SbJ
Docker Compose deployment: Codeman runs in a container and spawns Docker cases
as SIBLING containers through the mounted host socket (Docker-outside-of-Docker).
Resolved the README conflict (master had grown to eight CLIs since the branch
was cut) and moved the Compose blurb out of the feature bullets into Quick
Start, next to the other ways of starting Codeman.
Three review findings from the PR discussion are fixed here rather than left
for a follow-up, because two of them are shipped-image problems:
- `.dockerignore` excluded `.env` only at the ROOT. A pattern is matched against
the whole context-relative path, so `docker/.env` — which the deployment's own
README tells the user to fill with CODEMAN_PASSWORD and provider API keys —
was picked up by `COPY . .` and baked into the image at
/opt/codeman/docker/.env. Verified in both directions against a real build
context: with a canary secret in docker/.env, the unfixed ignore file lets
/ctx/docker/.env through, and `**/.env` (plus `**/.env.*` and a negation for
the checked-in .env.example) leaves only the example behind.
- `CODEMAN_CASES_PATH` moved the server's CASES_DIR but not the CLI's, which
still hardcoded ~/codeman-cases, so `codeman skill install --case <name>`
reported "Case not found" on exactly the deployment the override exists for.
Both now resolve through config/cases-dir.ts. state-store.ts keeps its own
literal on purpose: that one migrates the historical ~/claudeman-cases
directory by name and is about the old default, not the active location.
- CLAUDE.md gained the Compose paragraph (the sibling-container inversion, the
three env vars, the .dockerignore and root-owned-bind traps) and .dockerignore
joins the documented list of files that genuinely belong in the repo root.
The PR's `mode === 'claude'` guard on dockerResumeId is an unrelated master bug
fix riding along: appendResumeFlag() maps a resume id onto codex/gemini/pi/grok/
deepseek/omp/antigravity and RESUME_ID_SAFE accepts a UUID, so a Docker case's
lastClaudeSessionId was handed to every non-claude CLI.
Full gate green in a merge worktree: 6360 tests, lint, format, frontend syntax,
public assets, lockfile.
Which conversation a pane is on was re-derived by correlating
~/.claude/history.jsonl against Session.lastSubmitAt — and lastSubmitAt is
bumped only by input that flows through Codeman's own write path
(Session.write / writeViaMux). A user who attaches to the pane's tmux session
directly never set it, so resolveActiveClaudeSessionIdFromHistory() returned at
its first line for that pane's whole life and the response viewer stayed pinned
to the launch conversation, showing a pre-/clear transcript indefinitely.
A UserPromptSubmit hook reports the live conversation id from inside the CLI
process, delivered under the pane's own $CODEMAN_SESSION_ID. That binding is a
fact rather than a correlation: it never consults workingDir, so it cannot be
claimed by a sibling pane on the same folder, a closed tab, or a bare `claude`
in the user's terminal. A pane holding such an id skips the correlation
entirely, so the number of prompts eligible for cwd-based guessing goes DOWN,
never up — the naive alternative (relax the guard, or synthesize an anchor from
PTY activity) is the reverted bug the resolver's own comment describes.
The hook also stamps lastSubmitAt, so it finally means "a prompt was submitted"
rather than "typed into Codeman's web terminal". Conversations vouched for
first-hand — and only those — extend a persisted claudeSessionChain, whose tail
re-pins the conversation when a surviving tmux session is re-attached after a
restart. ⚠️ start() resets the id at THREE points and the last one runs
unconditionally after the mux branch, so the tail is applied there too; patching
only the mux branch looks right and silently does nothing.
⚠️ The hook's stdout is discarded with curl's own -o /dev/null. Claude Code
injects a UserPromptSubmit hook's stdout into the model's context ("Exit code 0
- stdout shown to Claude"), and a trailing >/dev/null does NOT work: curlCmd
already ends `... 2>/dev/null || true`, and in `pipeline || true >/dev/null` the
shell binds the redirection to `true`, which never runs on the success path. The
discard is opt-in so the five SSE-fed events keep byte-identical command text
and no workspace's settings file is rewritten for them. The staleness marker is
quote-free for the matching reason: hooksJson is JSON.stringify'd, so a quoted
needle never matches and the gate would rewrite every workspace on every spawn.
Existing workspaces heal on their next Claude spawn through the staleness sweep.
Codeman maintainer