Two follow-ups to db93491 (the 2026-06 CC meta.json format change), after
reverse-engineering the new on-disk layout with a live current-CC subagent +
1Hz fs poller:
(1) Workflow recursion — the Workflow tool nests its agents at
subagents/workflows/{wf}/agent-{id}.jsonl, one level below the flat
subagents/ scan, so they were never tracked. Add watchWorkflowDirs()
(driven from scanForSubagents) to descend and watch each workflow dir
(idempotent; fs.watch recursive is unsupported on Linux, so the ~5s
periodic scan re-drives it — same latency as new-session discovery).
Require the `agent-` prefix in the flat readdir + watch callback so a
workflow dir's sibling journal.jsonl can't register a bogus "journal" agent.
E2E verified against real ~/.claude/projects: 32 workflow-nested agents
discovered (wf_fa35c1d8-4a9), 0 bogus journal agents.
(2) Transcript timing — empirically the per-agent .jsonl IS written at the
standard subagents/ path and grows incrementally (tailable); the
/tmp/.../tasks/<id>.output the prior probe found is just a symlink back to
it. meta.json lands at spawn, the .jsonl a beat later. Add a meta→transcript
upgrade in registerAgentFile: when an agent registered meta-only gets its
sibling .jsonl, re-point filePath, drop the stale sidecar context, start
tailing, and emit subagent:updated (not a duplicate discovered). Corrects the
now-inaccurate "no transcript to tail" doc comment on registerAgentMeta.
Tests: 2 new cases (workflow-nested discovery; journal.jsonl not registered).
All 56 pass; tsc/lint/format clean.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Claude Code changed its subagent on-disk format (~2026-06-14): TUI Task
subagents now write `agent-{id}.meta.json` ({agentType,description,toolUseId})
into the session's `subagents/` dir and no longer reliably write a per-agent
`agent-{id}.jsonl` transcript there. The watcher discovered agents ONLY by
`.jsonl`, so it tracked zero — subagent windows and the monitor's "N TRACKED"
showed nothing.
- Add `registerAgentMeta()`: discover from the meta sidecar (description from
meta.description/agentType), prefer a sibling `.jsonl` transcript when present
(richer), never tail a meta file.
- Initial scan + directory watcher now handle `.meta.json` alongside `.jsonl`.
- Tests: 2 new cases (meta-only discovery; prefer-.jsonl-when-present).
Verified e2e against a real ~/.claude/projects fixture.
Known follow-ups (not in scope): meta-only agents have no per-agent transcript
to tail (no live tool-call feed, status stays 'active'); workflow agents under
`subagents/workflows/{wf}/agent-*.jsonl` are still missed by the flat scan.
Also adds the README screenshot tooling used to surface this:
- capture-real-overview.mjs: DSF=2 + ?nowebgl crisp path (DOM renderer avoids
the WebGL glyph-doubling at deviceScaleFactor>1).
- capture-readme-real.mjs: real-instance desktop-scene capture (dashboard/
monitor/subagent) for an isolated beta seeded from prod settings.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Knip-driven cleanup. All changes verified with tsc --noEmit, lint, and
build.
Removed (zero consumers):
- VERIFICATION_PROMPT constant + its barrel re-export
- createInitialOrchestratorPersistState factory
- transcriptWatcher singleton export
- createAnsiPatternFull / createAnsiPatternSimple factories
- TimerInfo interface + unused AiCheckResult/AiPlanCheckResult imports
in respawn-controller.ts
- 35 unused Zod z.infer \`*Input\` types in schemas.ts
- Dead re-exports: SessionMode from session.ts, AuthSessionRecord from
web/ports/index.ts, EnhancedPlanTask/CheckpointReview from
ralph-tracker.ts, 7 unused entries in utils/index.ts
- 14 event/config interfaces that lived only as JSDoc hints (no TS type
position usage): Session/Respawn/RalphLoop/RalphTracker/
SessionManager/SessionAutoOps/Subagent/TaskQueue/TaskTracker/
TranscriptWatcher/Image/OrchestratorLoop Events + RespawnPreset +
SessionOutput
Narrowed to module scope (kept but no longer exported):
- buildPermissionArgs in session-cli-builder.ts
- 28 type/interface declarations used only within their own file:
Ai{Idle,Plan}Check{Config,State}, BashToolParser{Events,Config},
FileStream/CreateStream{Options,Result}, PlanSubagentEvent,
SubagentCallback, RalphLoopConfig, RalphLoop{Events,Options},
ActiveTimerInfo, DetectionStatus, ActionLogEntry, AutoOpsCallbacks,
TunnelStatus, Timer/LRUMap/StaleExpirationMap Options, AuthState,
SessionListenerDeps, SseStreamManagerDeps, and 8 more
Docs: CLAUDE.md advice for global-regex `lastIndex` now points to the
remaining `execPattern()` helper instead of the deleted factories.
Knip delta: unused files 42→0, unused exports 161→16, unused types 92→0.
The 16 remaining exports are a mobile-test helper toolkit intentionally
kept for upcoming tests.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
* refactor: extract SSE event handlers into named class methods
Replace ~80 inline addListener closures in connectSSE() with a
declarative _SSE_HANDLER_MAP array that drives registration in a
single loop. Each handler is now a named _on* method on CodemanApp,
making them individually addressable for LLM navigation.
Add SSE_EVENTS constant object in constants.js to eliminate magic
event-type strings scattered across the frontend.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* docs: fix inaccuracies in CLAUDE.md
- Fix types barrel path: src/types.ts → src/types/index.ts
- Update app.js line count: ~12K → ~11.5K
- Correct route handler counts (113 → 111, per-group fixes)
- Add code style, ESM gotcha, env vars, route test, lifecycle log docs
- Add Node 22 CI note, test teardown timeout, port range
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* docs: add mobile screenshots and QR auth security writeup to README
Add 3 mobile screenshots (landing, idle, active) and expand the
mobile section with QR auth security design details and a
touch-optimized interface subsection.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* feat: bundle xterm-zerolag-input as vendor IIFE and add pre-commit hook
Build and postinstall now bundle the local xterm-zerolag-input package
as an IIFE at vendor/xterm-zerolag-input.js with global LocalEchoOverlay
shim. Add git pre-commit hook that runs prettier --check on staged .ts
files to catch format issues before CI.
Also bump constants.js and app.js cache-bust versions to 0.3.0 and add
tunnel upload URL display row in settings.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* feat: add cloudflared install support and interactive launch menu
- Add optional cloudflared dependency detection and installation
across 6 distro families (macOS, Debian, Fedora, Arch, Alpine, SUSE)
- Add tunnel systemd service setup helper
- Replace post-install instructions with interactive launch menu
(run now / systemd service / skip)
- Uninstall now cleans up both codeman-web and codeman-tunnel services
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* chore: gitignore readme-preview.mjs
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* refactor: WIP — SSE event constants, @fileoverview docs, CLAUDE.md compression
- Migrate broadcast() string literals → SseEvent.* typed constants
- Add @fileoverview with cross-domain references to all 13 type domain files
- Add @fileoverview to frontend JS modules (constants, mobile, voice, etc.)
- Add section dividers to route files for LLM scanability
- Compress CLAUDE.md: flat file list → domain table, fix counts
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* refactor: optimize codebase for LLM context window efficiency
CLAUDE.md: 456 → 309 lines (32% reduction)
- Merge Commands into compact table, remove redundant bash block
- Convert Security section to dense table format
- Merge Performance + Resource Limits, Debugging + Troubleshooting
- Compress Tunnel, Memory Leak, Scripts, Screenshots sections
- Remove Key Patterns that duplicate @fileoverview in source files
Backend @fileoverview enhancements (10 priority files):
- session.ts: key methods, events, cross-domain refs
- respawn-controller.ts: state machine, idle detection layers
- ralph-tracker.ts: exports, circuit breaker, events
- ralph-loop.ts: lifecycle, persistence, events
- subagent-watcher.ts: watched patterns, teammate detection
- server.ts: coordination list, port interfaces
- state-store.ts: dual-file persistence, migration
- session-manager.ts: lifecycle methods, mutex guard
- hooks-config.ts: hook events list, categories
- sse-events.ts: category breakdown (~90 events, 17 categories)
Frontend app.js: add 6 section dividers, update @fileoverview line refs
Fix: escape glob `*/` in JSDoc that broke ESLint parser
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* fix: address PR #29 review bugs
- server.ts: replace hardcoded 'session:needsRefresh' with SseEvent constant
- install.sh: fix Alpine cloudflared install for non-root (download to tmpfile first)
- install.sh: replace Arch pacman (AUR-only) with direct binary download
- index.html: bump all 8 remaining cache-bust versions from v0.2.9 to v0.3.0
- mobile-handlers.js: fix @dependency annotation (keyboard-accessory.js, not constants.js)
- types/push.ts: fix layer number (4, not 5)
- subagent-watcher.ts: fix watched pattern path to include {session} segment
- constants.js: fix SSE_EVENTS count in @fileoverview (~73, not ~65)
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
* add project setup
* add tools to eslint
* remove contributing.md
* update claude md
* chore: simplify CI to single Node.js version (22)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* use node 20
* adjust formatting
* fix linting
* format
* fix layout
* fix: align CI node version to .nvmrc (22), remove redundant gotcha
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Co-authored-by: arkon <arkon.85@hotmail.com>
- Clear teams/teamTasks maps in handleInit() on SSE reconnect
- Fix saveNowAsync() race condition with in-flight promise guard
- Add setMaxListeners() on Session, WebServer, SubagentWatcher,
ImageWatcher, TmuxManager to prevent MaxListenersExceeded warnings
- Debounce persistSessionState() per-session (100ms) to reduce
redundant toState() serialization across 25+ call sites
- Cache getLightSessionsState() with 1s TTL to avoid re-serializing
all sessions on every SSE connect and /api/sessions request
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Convert sync readFileSync/statSync to async in subagent-watcher.ts to
unblock event loop on hot paths (transcript reads, liveness checks)
- Fix Map mutation during iteration in closeSessionLogViewerWindows and
closeSessionImagePopups (collect IDs first, then iterate to close)
- Unify session cleanup into shared _cleanupSessionData() method called
from both closeSession() and session:deleted handler to prevent leaks
- Add Zod validation schemas for 20+ API routes that used raw type casts
- Add consecutive error tracking (5 errors/60s triggers exit for systemd
restart) and SIGHUP handler for SSH disconnect safety
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
1. handleInit crash: commit cdc822d removed Map initializations for
teammateTerminals, teammatePanesByName, teams, teamTasks, teammateMap
from the constructor but left cleanup code that iterates them.
cleanupAllFloatingWindows() crashed on "not iterable", preventing
ALL frontend data (sessions, subagents) from loading.
2. claudeSessionId null on recovered sessions: only set inside
startInteractive(), never in constructor or persisted. After server
restart, recovered sessions had null claudeSessionId, so the
hasMatchingTab check always failed → no subagent windows.
Fixes:
- Re-add all 5 missing Map initializations in app.js constructor
- Set _claudeSessionId = this.id in Session constructor (Claudeman
always passes --session-id to Claude, so they always match)
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Added IS_TEST_MODE (process.env.VITEST) guards to every method in TmuxManager and
ScreenManager that touches real tmux/screen sessions. Tests can never create, kill,
discover, or send input to real sessions. Removed broken E2E test suite entirely.
Rewrote test/setup.ts from 459 lines to minimal cleanup. Rewrote tmux-related tests
to verify test-mode safety behavior.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- WebServer: Store session listener refs for explicit cleanup on delete
- RespawnController: Fix clearInterval bug (was using clearTimeout)
- RespawnController: Add try/catch to interval callbacks
- PlanOrchestrator: Guarantee progressInterval cleanup with try/finally
- SubagentWatcher: Guard idle timer against deleted agents
- Session: Add threshold validation for auto-clear/compact (1k-500k)
- Session: Add token sum overflow check in restoreTokens
- Session: Use LRUMap for _recentTaskDescriptions auto-eviction
Commit from flight QR118 in an Airbus A350-1000, stable connection thanks to Starlink!
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add KeyboardHandler module using visualViewport API for keyboard detection
- Set --keyboard-height CSS variable and toggle .keyboard-visible class
- Auto-scroll focused inputs into view after keyboard appears (350ms delay)
- Update viewport meta with interactive-widget=resizes-content for Android
- Add scroll-margin on inputs for tablet/phone breakpoints
- Resize modal-content and modal-body when keyboard visible on mobile
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add warningTimer to AgentContext and clean it up in cleanupAgent
- Clear all state in subagent-watcher stop() for clean restart
- Add cleanupStaleAgents() to remove completed agents older than 24h
- Delete pendingToolCalls entries after lookup to prevent memory leak
- Add FSWatcher error handlers to prevent unhandled exceptions
- Bump version to 0.1382
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Session Manager:
- Store event handlers for proper cleanup on session stop
- Add resetSessionManager() for test isolation
State Store:
- Use atomic write pattern (temp file + rename) to prevent corruption
- Add tokenStats to AppState interface
Subagent Watcher:
- Clean up pendingToolCalls on agent completion
- Add cleanupStaleAgents() for 24h+ old agents
- Clear all state maps on stop() for clean restart
Web Server:
- Remove listeners from transcript watcher before stopping
- Clean up respawn timers when session is deleted
- Use cleanupSession() in spawn orchestrator for proper resource cleanup
Frontend:
- Close existing EventSource before reconnecting to prevent duplicates
- Close failed connection before scheduling reconnect
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Instead of timing-based correlation between terminal output and subagent
files, now reads the Task tool's description parameter directly from the
parent session's transcript. This provides 100% reliable mapping between
agent IDs and their short descriptions, fixing issues where multiple
agents spawned in quick succession would get the same window title.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add parseTaskDescriptionsFromTerminalData() to parse raw terminal data in
interactive sessions (not just one-shot mode)
- Strip ANSI codes before regex matching since terminal output has embedded
codes like [1mExplore[0m
- Fix getTaskDescriptionForSubagent() to check ALL sessions with matching
project hash (not just the first one found) since multiple sessions can
share the same working directory
- Add tool_result event forwarding for subagent SSE broadcasts
The pattern Explore(Description) in terminal output is now correctly parsed
and used as the subagent window title instead of extracting from the prompt.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Extract short description from TaskTracker (params.description) for subagent windows
- Correlate subagents with sessions by working directory and timing
- Auto-minimize subagent windows when agents complete
- Persist minimized/open window states to server for cross-browser sync
- Restore window states on reconnection/page reload
- New API: GET/PUT /api/subagent-window-states
- State file: ~/.claudeman/subagent-window-states.json
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add 100ms debounce for new file detection to allow content to be written
- Add subagent:updated event for retroactive description updates
- Extract description in processEntry when first user message is processed
- Add extractDescriptionFromFile helper with retry in file change handler
- Update SubagentTranscriptEntry.content type to support string | array
- Add test coverage for subagent:updated event
Fixes 43% failure rate where subagents displayed raw IDs instead of descriptions
due to race condition when files were discovered before first line was written.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Move COM shorthand to prominent position after safety warning
- Add version sync note (must match package.json)
- Consolidate Key Files into 4 logical categories
- Clarify next available test port (3128)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Condenses long prompts to ~45 chars while preserving meaning
- Removes filler words (the, a, please, I need you to, etc.)
- Cuts at natural boundaries (colons, dashes, commas)
- Falls back to word-boundary truncation
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The JSONL files have message.content as a direct string, not an array
of content blocks. Now handles both formats correctly.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Extract better titles from task description (first line/sentence)
- Make subagent window text white for better readability
- Expand monitor panel to 700px when subagents tab is active
- Add smooth width transition when switching tabs
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add SubagentWatcher service that discovers and tails Claude Code's subagent
transcript files (~/.claude/projects/.../subagents/agent-*.jsonl)
- Track tool calls, progress events, and messages in real-time via file watching
- Add SSE events for subagent:discovered, subagent:tool_call, subagent:progress,
subagent:message, subagent:completed
- Add REST API endpoints: GET /api/subagents, /api/subagents/:id,
/api/subagents/:id/transcript
- Add subagent panel in Monitor section showing active agents and their activity
- Add floating draggable windows that auto-open for each active agent
- Add standalone CLI tool: scripts/watch-subagents.ts for terminal monitoring
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Codeman maintainer