Rebased over #390, which moved the phone tier's cutoff from 430px to
600px. The palette's compound fold rule now lives in the 600-768px band
mobile.css pads, the cascade samples the palette inside that band, and
the closed iPhone Duo (466pt) is a phone rather than a small tablet while
the open one (626pt) stays a tablet. Comments in both stylesheets, the
device registry, CLAUDE.md and architecture-invariants say 600.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Two follow-ups to #361's sticky telemetry switch.
GET /api/settings reconciled an absent showPlanUsageLimits by persisting
true, but readJsonConfig() answers {} for ANY read failure (a parse
error, EACCES, EMFILE, a read landing inside PUT's non-atomic write), not
only ENOENT, and every page load calls this route, so one unlucky read
replaced the whole settings file with a one-key file. The route is a
plain read again and the default moved into the reader:
readPlanUsageTelemetryEnabled() treats an absent key as ON, the same way
readWorkspaceHooksEnabled() does, which is what the desktop chip already
shows for an install that never touched the setting.
saveAppSettings() sent showPlanUsageLimits on every save. The chip
defaults OFF on handhelds, so a phone saving its font size persisted
false and switched collection off for every desktop, whose chip then
went stale with no error anywhere. The key is now stripped like the
other per-device display keys and re-added only when the save FLIPS the
chip relative to what the device had (planUsageCollectionFlip), so an
explicit toggle on any device still writes it in either direction.
Tests pin both: the GET route with a mocked filesystem (absent, missing,
EACCES, garbage, explicit), the reader default, and the flip helper plus
its wiring in saveAppSettings.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Three cascade problems in the fold reserved-region CSS, each measured by
computed style in headless Chromium (styles.css + mobile.css in index.html
link order):
- The unconditional .path-picker-overlay / .path-preview-overlay fold rules at
the end of the file beat the `padding: 0` both overlays set under 600px, so
every phone got a 16px and 18px gutter on dialogs built flush (393 and 500px:
edges floating off the screen). The fold strip is now restated on a ZERO
base inside the same media query: 0/0 without a fold, the strip alone with
one, 16/18 plus the strip from 626px up as before.
- .modal.command-palette-modal was unscoped, so outside the 430-768px band
(where mobile.css pads the palette with a shorthand) it ADDED 0.75rem with
no gutter to compose with and pushed the shell 6px off centre at 393, 900
and 1400px, while inside the band the shorthand beat the generic .modal rule
on the bottom side and the palette lost its block-end gutter. The compound
rule now lives inside that band and restates both sides.
- The tabletop cap on .response-viewer lost to mobile.css's `max-height:
92dvh` under 430px (same specificity, later file). mobile.css now carries an
identical twin at its end.
test/foldable-layout.test.ts simulates the padding cascade across both files
at every breakpoint, with and without the fold rules, and requires the two to
differ by exactly the fold strip; it also pins the palette rule to the band
mobile.css keys on and the response-viewer twin to the styles.css value. Its
model reproduces the Chromium numbers, and against the pre-fix stylesheets it
fails on all three problems.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
A shape change with the keyboard up re-baselined initialViewportHeight to the
SHRUNK visual height, so heightDiff was 0 and the settle event the OS fires at
the new width (or any later address-bar drift) satisfied the hide branch and
ran onKeyboardHide() with the keyboard still on screen: accessory bar hidden,
toolbar lift dropped, main's padding cleared. It could not recover, since no
further 150px drop re-arms the show branch against a baseline already sitting
at the shrunk height.
Baseline to window.innerHeight instead when the keyboard is up: the page sets
no interactive-widget, so the keyboard shrinks only the visual viewport and
the layout viewport stays the display's full height on both engines, the same
fact updateLayoutForKeyboard() relies on.
The vm harness now models the two heights separately (resizeTo takes an
optional layout height) and pins the fold flavour (626x590, 466x378, 466x378),
the rotation flavour (393x359, 852x150, 852x160) and the eventual close. All
three fail against the old line.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Apple's "Designing for iPhone Duo" asks an app to adapt to both displays,
to stay continuous as the device opens and closes, and to treat the band a
partly-open display folds through as a reserved region. Three things here.
1. A visual-viewport resize that changes the WIDTH is the device changing
shape (a rotation, or a foldable opening or closing) and is never the
virtual keyboard, which only ever takes height. handleViewportResize()
read any height drop over 150px as the keyboard appearing, so closing a
Duo (890 to 678pt tall) latched keyboardVisible with no keyboard on
screen: the accessory bar appeared, main grew 84px of dead padding, and
updateAppHeight() stopped refreshing --app-height. The latch was sticky,
because clearing it needs the height back within 100px of a baseline
belonging to a display the user is no longer looking at. Rotating any
phone hit the same latch. The shape branch re-baselines instead, which
is also what lets a keyboard opened after the fold be detected.
2. The hinge is now a reserved region in CSS. --fold-inline-end and
--fold-block-end measure the strip to keep clear from the Viewport
Segments env() variables, and are 0px everywhere else, so the seven
centred overlays are inert by construction off a foldable. Each shrinks
its content box with padding rather than the box itself, so the backdrop
still covers the far side of the fold and still swallows taps there.
3. iPhone Duo (outer) and iPhone Duo (inner) join the mobile device
registry, derived from Apple's published pixel specs at 3x.
Verified in Chromium: flat, a dialog stays centred at 313 of a 626pt
viewport; in book pose it centres at 153 inside the 0-305 leading segment
with its right edge at 293, while the backdrop still spans all 626. The
3-term calc on the offline overlay resolves to 367px in tabletop pose and
20px flat.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Bold text on the theme's default foreground carries exactly ONE cue, the
weight step. Claude Code marks its markdown bold with a bare ESC[1m and
changes no colour, and xterm substitutes a bright colour for bold only
when the foreground is a palette index 0-7, so the substitution never
fires for default-foreground text. A family shipping only a regular and
a bold face keeps that step small (measured on Consolas: glyph ink rises
from 14.25% to 16.57%), and picking a different family does not help,
because 400 stays 400 whatever the family. Lowering the NORMAL weight is
the only way to widen the gap.
Two per-device settings beside "Terminal font" in the Font group, each
defaulting to xterm's own value for its slot, so an untouched install
renders exactly as it did before. Both thread into the main terminal and
the Agent Teams panes, and apply on save without a reload.
The bundled face had to be unclamped in the same change or the settings
would look broken on a stock install. fonts/jetbrains-mono-variable.woff2
carries a wght axis of 100 to 800, but styles.css declared the face
`400 700`, and the descriptor is what the browser synthesizes from: at
that range 100, 200 and 300 rendered identically to 400 and 800
identically to 700 (measured in headless Chromium, both directions).
The two families ahead of it in the default stack, Fira Code and Cascadia
Code, exist only if the user installed them, so for most installs
"normal = 300" would have been a no-op. Declared `100 800`, every step is
distinct: 61%, 77% and 90% of the ink at 400, and 800 adds ~14% over 700.
Nothing in the stylesheets asks for a monospace weight outside 400-700,
so widening it changes nothing that rendered before.
Details that are easy to get wrong and are pinned by tests:
- Each slot falls back to its OWN xterm default, so an unset bold weight
can never inherit `normal` and become a visible change.
- A live save refreshes both echo overlays. They cache
terminal.options.fontWeight and paint it into their spans, so without
it the characters being typed keep the old weight while the rest of the
screen changes. Most visible on a phone, where local echo is on by
default.
- A live save reaches open Agent Teams panes, which read their options at
construction, exactly as applyTerminalSkin() propagates its own.
- A stored weight the picker does not list (a hand-set 350) is added to
the select rather than dropped, so merely opening App Settings cannot
reset it.
- _awaitTerminalFont() is untouched. CharSizeService measures through the
CSS `font` shorthand, which resets the weight, so the measured face is
always the 400 one and a weighted descriptor would request nothing new.
Verified end to end in a headless browser against a live server: the save
reaches the running terminal with no reload, the settings PUT stays 200
(both keys are display keys and are stripped before it, since
SettingsUpdateSchema is strict), the value survives a reload, and the
painted terminal really changes weight with the bundled font (lit-pixel
ink 0.83 / 0.95 / 1.00 / 1.13 / 1.21 at 100 / 300 / default / 700 / 800).
Proposed and analysed by @irisitymichaelgrundberg in discussion #403.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The fixed 120px/96px caps on the two wrapped layouts were row counts in disguise: a
third row was clipped into a ~4px scroller, hiding tabs inside a container nothing
invites you to scroll, while the header had the page below it to grow into. Both
layouts now share one rule capped at var(--tab-strip-max-height, 40vh), a safety net
for an absurd session count rather than a row limit.
Verified before shipping: .header is min-height + flex-shrink: 0 so it can grow, and
terminal-ui's ResizeObserver refits the terminal when it does; updateTabOverflowMode()
returns early for any non-desktop viewport, and below 1024px mobile.css pins the header
to max-height: 48px, so this is desktop-only in effect; the selector is comma-grouped
rather than :is(), so each arm keeps (0,2,0) and mobile.css's overrides still win on
source order. PostCSS parses the file cleanly (prettier ignores styles.css).
Authored in a parallel session against this shared checkout.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
House style, and these land in the changelog. Only the sentences added in the
previous commit are touched; the em-dashes in contributor text and in the
pre-existing COD-54/COD-115 comments are left alone.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
#409 (Claude truecolor). The changeset becomes the changelog, and its premise
does not hold on tmux 3.2 or newer. Measured here on tmux 3.4: `default-terminal`
sits at its compiled default of `tmux-256color`, a live claude pane reports
`TERM=tmux-256color`, and supports-color reads that as 256 colors, where
rgb(55,55,55) lands on ESC[48;5;237m — visible, just not the color the theme
named. The invisible block the PR describes needs TERM to resolve to a 16-color
entry: tmux older than 3.2, or a ~/.tmux.conf setting `default-terminal screen`,
which Codeman's own tmux server does read (it passes no -f). Both the changeset
and the invariants paragraph now say that, so the next report here gets paired
with the reporter's tmux -V instead of being read as universal. The change itself
stands on the simpler argument: claude was one of two entries not asking for
truecolor while twelve do.
Also reorders buildClaudeEnv(). It applied the registry's unset/exports AFTER the
whole env was built, so a clis.json entry naming CODEMAN_HOOK_SECRET_FILE or PATH
would strip it on the direct-PTY path while the tmux pane kept it — buildEnvExports()
emits `...cliEnv` ahead of `export CODEMAN_MUX=1` and cannot. The block now runs
first and Codeman's own keys are assigned on top, matching the pane.
#404 (Ctrl+Z trap). Adds the missing changeset, and records what the trap does
not cover: an agent CLI already holds its tty with ISIG off (verified on three
live panes: `susp = ^Z -isig -icanon`), so this is defence for the startup window
rather than a fix for the steady state, and two input paths still reach the PTY
unfiltered — the mobile accessory bar's one-shot Ctrl and the CJK textarea.
#399 (path picker sort). The server sorts by name and cuts at 500, so the client
sorting those 500 by date gives "the newest of the first 500 by name", which is
wrong in exactly the >500-entry folder the date sort exists for. The status line
now says "(first 500 by name)" so the cut is legible, with the reasoning parked
on _sortEntries.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
docker/agent.Dockerfile hardcoded the four npm-published CLIs it installs, one
of the several lists that had to be kept in step with the registry by hand.
It now takes them as `ARG CLI_NPM_PACKAGES`, supplied by
scripts/build-agent-image.mjs from config/clis.stock.json, with the default set
to today's list so a bare `docker build` still produces the same image. The arg
is expanded unquoted because word splitting is what turns the list into several
arguments, which is exactly why every token is validated against
^[@A-Za-z0-9][@A-Za-z0-9/._-]*$ on the producing side; a package name carrying a
space or a metacharacter is refused rather than reaching the RUN line. Verified
by building the layer: four packages in, four arguments out, and the default
still applies with no arg.
The list is filtered on each entry's `enabled` flag — the field whose absence
was the maintainer's §3 finding, where a CLI shipping disabled still got baked
into every image. No stock entry is disabled today, so that assertion would pass
vacuously; a unit test feeds the pure helper a fabricated disabled entry so the
fix is covered now rather than the first time someone ships one.
⚠️ It reads the STOCK catalogue, never the merged registry. A user's
~/.codeman/clis.json must not change what is inside an image tagged
codeman/agent:base, or two machines holding that tag hold different images.
Four CLIs keep hand-written layers because the registry cannot describe what
makes them special: pi's --ignore-scripts, deepseek's pnpm companion and dsh-tui
profile, and the three standalone installers. Rather than extend the schema for
a Docker-only benefit, the coverage test requires each to carry a written reason
AND still be present, so an exclusion cannot quietly become an omission.
There are two producers of this command line and there have to be — the .mjs
cannot import TypeScript, and src/docker-hosts.ts builds the same argv for the
in-app auto-build — so a parity test pins them together, package list, arg pairs
and rendered argv. Their order is pinned too: a different order is a different
RUN string and so a needless cache miss between the two build paths.
docker/server.Dockerfile is deliberately NOT edited (PRs #373 and #377 both
modify it); its narrower list is asserted as a declared omission list instead, so
the divergence is reviewable without touching the file.
Also fixes the in-app hint at index.html, which the new coverage test caught
still omitting omp.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_015EMxQreQUZX5ZyybxAGh12
A Fable 5.1 reviewer read the whole release diff against 1.26.2 and returned
SHIP WITH FIXES. These are its findings, verified before acting on each.
**The changelog advertised a feature the code refuses (major).** The #401
changeset and docs/web-tabs.md both listed `*.localhost` in the loopback set.
The follow-up in 02b0e278 moved it out of the auto-route set on security
grounds and updated CLAUDE.md but neither of those, and that changeset becomes
the 1.27.0 CHANGELOG entry: a user would have read the release notes, tapped
`http://app.localhost:3000/` on a phone and got a connection error from a
documented feature. Both corrected, and the user guide now says why it is
excluded and that adding such a dashboard by hand still works.
**Dictation delivered its text twice (minor, #388).** `keydownSnapshot` started
`null`, so `keydownSnapshot ?? canonicalCount` at the input event read a counter
xterm had ALREADY bumped: on a fresh page load with no keydown yet, xterm's own
capture listener forwards the `insertText` itself (it is not gated behind a
keydown), then the snapshot equals the bumped count, `count > snapshot` is
false, and the controller emits the same text again. Reproduced directly
against the module: it emitted `hello` for input xterm had already delivered.
A `0` baseline restores that file's own invariant, that a missed recovery is
acceptable and a duplicated keystroke is not. Two regression tests, covering
both the xterm-already-delivered and genuinely-dropped halves.
**The sorted rail's arrow-key walk followed the DOM (minor).** `_tabKeydownHandler`
steps `querySelectorAll` order, which is `sessionOrder`, while a sorted rail
paints its rows with the flex `order` property, so ArrowDown from the top card
landed wherever that session happened to sit in the tab order. It now sorts its
node list by the COMPUTED order first: computed rather than inline, because web
tabs take their `order: 9999` from CSS and would otherwise read as 0 and lead
the walk. This is the one place that follows the paint; the Alt+N badge, the
drag model and the filter all still deliberately read the DOM.
**A trusted dashboard was auto-reused by a tapped link (minor, #401).** The
reuse loop skipped `managed` and direct-mode records but not `trusted`. A
trusted frame is mounted with `allow-same-origin`, i.e. on Codeman's origin
with the user's cookie, and these links come from agent output, which is the
threat model the loopback allowlist was just narrowed for. An agent that can
write into the dev server's tree could print a path that one tap opens inside
that privileged frame. Excluded from auto-reuse, with a test; opening it from
the Run dropdown is still an explicit action and unchanged.
**Two documentation claims that were no longer true.** CLAUDE.md said
test/location-overlay-commands.test.ts pins every remote pane command, but
remote claude and remote omp now have their own arm in `buildRemoteLaunchCommand`
and never reach `defaultRemoteCommandForMode`, which is what that test asserts,
so it pins nothing for them and changing either arm will not fail it. Named the
real pins instead. Also documented the arrow-key-walk exception in the rail
paragraph.
Left as follow-ups, deliberately: `POST /api/webviews` does not dedupe by URL
server-side, so two devices tapping one link concurrently can still save two
dashboards for one origin (pre-existing endpoint behaviour that #401 makes
reachable by a tap), and the location-overlay golden should assert the real
remote claude/omp commands rather than a branch neither reaches.
Full gate green: 359 files, 6869 tests.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The vertical rail lists exactly the sessions both home screens list, so it now
answers their question the same way instead of showing the raw tab order.
Order: new per-device `tabRailSort` (App Settings -> Appearance -> Tabs ->
Vertical Rail Order, default "By activity"). It runs `CodemanSessionOrder` over
rows classified by `_mobileOverviewState`, i.e. literally the home screens'
comparator, `lastSubmitAt`-anchored running group included.
It is applied as the flex `order` property, never by reordering the DOM.
`#sessionTabs` stays in `sessionOrder`, which is what keeps the Alt+N badge
honest (it names a shortcut, not a row position, so it deliberately does NOT
run 1,2,3 down a sorted rail), and keeps drag-and-drop, the arrow-key walk, the
sidebar filter and `_scrollActiveTabIntoView()` all reading the list they
always read. A session changing state then moves one inline style instead of
forcing the full rebuild that would restart every card's animation on every SSE
tick. The incremental render path re-applies it, since a state flip adds no tab
and never reaches the full rebuild, and an empty string is what clears it when
sorting stops. Web tabs are pinned past the cards by a CSS `order: 9999`, since
`renderWebviewTabs()` emits the same markup for every layout and the flex
default of 0 would interleave them. Drag is switched off while sorting (the
drop rewrites `sessionOrder` correctly and the sort puts the card straight
back, so the affordance would be a lie); 'manual' is the way back.
Cards: detailed rail rows become bordered cards on `--bg-card`, with the stamps
line on its own full-width row and the pill at its right end. The state dot
goes 6px to 9px, keeps its orbiting ring while working and gains the green
halo; idle mutes toward `--text-muted` as the home rail does. Needs/error/
waiting reuse `home-sessions-blink-red`/`-yellow` rather than a second copy.
These card rules are RAIL-SCOPED and deliberately absent from the comma-grouped
selectors that carry both vertical surfaces: the rail is an occasional,
resizable list you scan, while the sidebar is a permanently-docked nav column
where 20 stacked cards read as a wall. Every state-dot rule also excludes
`.tab-alert-action`/`.tab-alert-idle` by hand, because those alert rules are
only (0,3,0) and these are (0,5,1)+.
Lines: the lineage bracket already drew in the rail, but its track sat 6px from
the left edge, so half of its 11px outer glow was clipped by the window frame
and it read as a thread pinned to the frame. It now runs at 10px, mid-channel
in the gutter the rail already reserves.
Tests: test/tab-rail-order.test.ts (17) drives the real `isTabRailSorted()` and
`_tabRailSortOrder()` out of app.js, covering the row model (a WORKING row
ranked by `lastSubmitAt`, which would otherwise rank every running turn as
freshly started and fail no rendering test), the Alt+N badge, and the opt-out.
Verified in Chromium across sorted/manual/simple/header-strip/sidebar with the
setting flipped at runtime: no page errors, and the header strip and sidebar
render byte-identically to before.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Each item is from the pre-merge review of the PR it names, applied on master
rather than by pushing to a contributor branch.
#400 (response viewer, shenlvkang-collab)
- The brief view opened at `scrollTop = 0`, right when it was a single card
holding the last row. Now that it renders the whole turn, the top is the
turn's first narration line and the answer can be screens below it, while
loadFullContext already scrolls to the bottom of the same turn. A multi-row
turn now opens at its newest text; a single card still opens at the top.
#401 (loopback links as web tabs, shenlvkang-collab)
- Drop `*.localhost` from the auto-route set. Every other member is an address
literal that can only mean this box; a `*.localhost` DNS name is not one, and
a resolver with a search domain retries `evil.localhost` as
`evil.localhost.<search domain>`. The link source is agent-written terminal
output, so that set is the whole confinement on a tap that makes Codeman
fetch a URL server-side and persist it. The page-side test stays broader
(`isOnBoxHostname`), where a false positive only declines to proxy.
- A link to the origin root navigated nothing: the path was flattened to '',
which openWebview reads as "no deep link", leaving an open frame where it was.
- `this.webviews` being set does not mean it is loaded. initWebviews() assigns a
truthy empty map and only then awaits the list, so a tap during page load
found nothing to reuse and POSTed a duplicate record. Join the in-flight
refresh instead.
- One dashboard per dev server rather than per host spelling, which is what the
method's own comment already promised.
- Toast on the auto-create: it writes webviews.json, broadcasts over SSE and
adds a Run-dropdown row on every signed-in device, with a new tab as its only
previous signal.
#362 (remote omp continuation, timkjr)
- Accept the allowlisted `mode === 'omp'` arm as-is; a blanket registry render
would hand deepseek a locally-resolved --profile and bypass claude's own
overlay. A registry-declared switch is the follow-up if a third mode needs it.
- Revert the whole-file Prettier reformat of docs/remote-sessions.md (docs/ is
hand-formatted and outside `npm run format`), keeping only the two new
sections.
- Correct three stale passages: architecture-invariants' `exec claude
--dangerously-skip-permissions`, the `exec <cli>` paragraph (claude and omp
now have their own arms, and the claude pane's PID is the login shell), and
omp-integration's `-c 'omp'`. RemoteCommandMode gains deepseek and omp.
- Add the missing `_maybeCaptureOmpSessionId` remote-guard test; the sibling
guard in `_pinOmpRespawnId` had one and this path runs earlier, on the first
idle turn.
#388 (keyCode 229 recovery, aakhter)
- Gate notifyCanonicalData on shouldSuppressTerminalQueryResponse and
isTerminalFocusOrMouseReport. onData also carries the DA/DSR/CPR/OSC replies
xterm answers during Ink redraws and its SGR mouse and focus reports; any of
those landing between the keydown and the candidate's resolution was read as
"xterm spoke for this keystroke", standing the recovery down and leaving the
character dropped, worst on a busy agent pane. Reached through
window.CodemanTerminalInput: the predicates live in a module IIFE that closes
long before this call site, so bare references would throw into the
surrounding try/catch and stop the notify from ever running.
Every fix has a test that fails without it (verified by reverting each).
Full gate green on the combined tree: 358 files, 6849 tests.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Ctrl+Z (SIGTSTP) suspends the foreground job on the pane's tty. In a plain
shell session that's the user's own job-control tool (suspend, fg back),
but in claude/omp/pi/codex/etc. sessions it stops an unattended agent loop
dead with no visible output — the same failure shape as an XOFF freeze,
just via job control instead of tty flow control. Ink-based TUIs usually
run in raw mode (ISIG off) where ^Z is inert, but that only holds once the
CLI is actually running and stays in raw mode; it's live at the shell
prompt before launch and during any raw-mode toggle.
Swallow it client-side in attachCustomKeyEventHandler, mode-gated so shell
sessions keep normal job control, mirroring the existing Ctrl+V/Ctrl+Backspace
interception pattern in the same handler. Case-insensitive key match (Caps
Lock flips ev.key to 'Z' without setting shiftKey, so a plain === 'z' check
let the exact suspend keystroke this exists to catch slip through).
Also cover subagent/teammate terminal windows (panels-ui.js's
initTeammateTerminal), which render a separate xterm instance with no
custom key handler at all and are always running an agent CLI — never a
shell — so the trap there is unconditional.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
An agent prints `http://localhost:5173/` (a dev server, a preview it just
served) and the user taps it on a phone. That address only exists on the
Codeman box, so the link was a guaranteed connection error from any other
device — while the web-tab proxy fetches from the server, where it works.
A loopback link (`localhost`, `*.localhost`, 127/8, 0.0.0.0, ::1) activated
in the terminal or clicked in the Response Viewer now opens as a proxied
web tab whenever the Codeman page itself is not on that box. A saved
proxied dashboard on the same origin is reused, with the link's own path,
query and fragment opened inside it (a mounted frame is navigated, not torn
down, so its state survives); otherwise one is saved under its host:port,
sandboxed like any other web tab, so it is in the Run dropdown next time.
Only loopback is routed this way. A LAN or tailnet address may well be
reachable from the device (a VPN, the same Wi-Fi) and a direct open is the
cheaper, richer path, so those keep opening in a new browser tab; on the
box itself every link opens directly. The terminal link provider and the
viewer's click handler consult one hook and fall through to their existing
behaviour when it declines.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01McLWqCWBuQYGuPMScb4Aou
The eye button rendered `data.text`, which is one row: the last assistant
row of the transcript. A Claude answer is a median of 3 model messages
(p90 11) split around tool calls, so the brief view usually showed the tail
of an answer ("Done.", "Let me look.") and the substance appeared only after
More. The full view was fine, which is why the brief one read as broken by
comparison.
The brief view now asks `?context=turn`. The reader answers with the
assistant messages of the last ANSWERED turn (`selectLastAnsweredTurn`: the
highest `turn` that has an assistant row, so a prompt queued after the
answer does not blank the view) and the frontend renders them exactly as
the full view renders that turn: one badge, then continuation segments,
gated on the numeric `turn` as before.
`data.text` is unchanged in every context — still the last assistant row,
never `messages.at(-1)` — because agent pollers hash it. Readers that emit
no turns (Codex, the pane parser, DeepSeek, an older server) return `text`
only for `context=turn`, and the brief view keeps its single card for them.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01McLWqCWBuQYGuPMScb4Aou
The picker's current-folder line was a read-only breadcrumb, so reaching a
deep folder meant tapping through every level, and the listing was fixed to
name order, so the file an agent had just written was somewhere in a
500-entry list.
The current folder is now an editable field: Enter or Go jumps there, a full
file path lands in its folder with that file selected, and a path that does
not resolve keeps the listing you had and says so, instead of the reset to
the root that a stale initialPath gets. A Sort control orders the listing by
name or modified time in either direction, folders always first, and the
choice is remembered per device like the hidden toggle. Each entry shows a
compact modified time (time of day today, month-day this year, else the
date).
GET /api/filesystem/browse stamps every entry with mtimeMs to make that
possible; the stat that already fetched a file's size now serves both, so
it is still one stat per entry. Entries without an mtime (an older server,
the in-container listing) sort after dated ones and then by name.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01McLWqCWBuQYGuPMScb4Aou
An iOS-style focus pull: the thing arrives out of focus and the blur fades
off it as the opacity comes up. Opacity leads the blur (full opacity around
45%, blur still lifting), which is what separates it from a cross-fade.
Ships on tabs (440ms), agent windows (560ms), the terminal pane (520ms) and
connection lines (380ms), plus a `Soft focus` theme that sets all four.
Default stays `legacy`, so an untouched install is unchanged.
The terminal pane is the one surface that cannot blur itself the documented
way, and `blur` takes a deliberate exception to the "never a filter on
.terminal-container" rule. Every alternative was measured against a live
xterm and does not work: a backdrop-filter veil on ::before blurs perfectly
while STATIC, and Chrome silently drops the backdrop the moment ANY
animation runs on that pseudo-element (the veil computes blur(15.3px) while
the text behind it stays razor sharp); driving the radius from rAF buys the
same full-screen blur per frame plus main-thread work. The cost the rule
exists to avoid is inherent to blurring a terminal, so the style buys it
knowingly: opt-in, off by default, one ~520ms run per session open, class
straight back off, will-change still unset. Worst-case price, headless
SwiftShader with no GPU: frame deltas 16.7ms -> 33.3ms for the run, against
16.7ms flat for `fade`. cols x rows measured unchanged at 178x38 before,
during and after, so FitAddon never sees it.
The line entrance animates `filter` too, where each line already carried
its glow. Both kinds now hold it in --line-glow and both keyframes say
`blur(N) var(--line-glow)`, so the function lists match and interpolate
instead of the glow vanishing for the run and popping back (a lineage
line's glow is a different colour, set per element). Its 100% frame omits
`opacity` on purpose so the endpoint comes from the element's own resting
value: 0.9 subagent, 0.72 lineage, 0.95 working.
test/entrance-animations.test.ts is a new static guard over the whole
feature, not just this style: the rule -> keyframes -> theme-option chain a
style silently does nothing without, the terminal's paint-only property
allowlist (the FitAddon rule), the --line-glow contract, and reduced-motion
coverage. Mutation-checked both ways.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Review of the previous commit found that waiting for the font does not, on its
own, do anything.
`FitAddon.proposeDimensions()` measures nothing — it divides the container by a
CACHED cell size, and xterm refreshes that cache only from `open()`, from a
resize that actually changed the grid, and on a device-pixel-ratio change.
Nothing in it listens for font loading. So a fit that runs after the font
arrives can still divide by the fallback cell, propose the grid it already has,
and short-circuit before anything re-measures. The wait now ends by calling
`_charSizeService.measure()` itself, which is the step that makes the following
fit see the real font. Private API, as FitAddon's own dependency on `_core` is,
and guarded because a terminal can be disposed mid-wait.
The wait was also unbounded, and it sat behind the buffer-load gate. Neither
`FontFaceSet.load()` nor `FontFaceSet.ready` has a deadline, so a font request
that never settled left the tab spinning with live output queued behind it —
permanently, and on every session, since they share one promise. The comment
claimed the opposite ("a font that never loads must not block the terminal, so
this always resolves"), which was true of the per-face loads and false of
`ready`. It is now raced against TERMINAL_FONT_WAIT_MS, and the await moved
ahead of `_beginBufferLoad` so a slow font cannot hold output back at all —
which also removes the stale-select interaction with `_restoringFlushedState`,
since that flag is not yet set when the wait runs.
The awaited set no longer includes faces that cannot move the measured cell.
The bundled symbols font is ~1.2MB of private-use-area glyphs and xterm
measures `W`, so awaiting it put a megabyte in front of the first frame for
nothing; the generic families match no FontFace at all.
A runtime font change had the same race the boot-time one did:
applyTerminalFontFamily wrote the new family and fit on the next line, against
a family the browser might not have loaded. It now re-arms the wait and fits
again when it settles.
The claim that this could not be tested was wrong: the repo's vm harness
reaches both halves. The new suite pins the family filter, the forced
re-measure, the deadline, a rejecting load, a browser with no font API, and a
terminal disposed mid-wait — plus the four ordering properties in
selectSession, including that iOS Safari's synchronous focus still precedes the
first await. Each assertion was checked by reverting its fix.
Also corrects the docstring's reason for calling `document.fonts.load` (the
stylesheet is render-blocking and long parsed by then; the real reason is that
the WebGL renderer rasterises through a canvas atlas, and canvas text never
triggers a CSS font fetch), restores the JSDoc block the previous commit
displaced from getTerminalDimensions, and fixes a comment that described the
first fit as already having run when the mobile-Safari branch defers it.
Review of the previous commit found four defects in it.
The guard sat above the local fit, so it suppressed a reflow as well as the
server write. tab-rail-resize performs its single settle-time refit through
sendResize and has no fallback for a truthy activeSessionId, so dragging the
rail stopped reflowing a detached session's terminal in the dashboard. The
mobile-keyboard guard fourteen lines below already draws the line correctly —
withhold the send, never the reflow — and the guard now sits after the fit.
_lastResizeDims is one value for the whole window, and both guards skip
updating it, so while a popup owns a session that value no longer describes
the PTY. _redock repaired it only for the active session. Pop out A, switch to
B, close the popup: selecting A later found unchanged dimensions, returned
"unchanged", and selectSession skipped its 400ms redraw wait — while the
server, comparing against the real pane, did resize and did raise SIGWINCH, so
the fetch painted the pre-redraw frame. _redock now clears the record on every
path, active or not.
_redock could also fire a resize for a session already gone: _onSessionDeleted
redocks before cleanup, so the id can be dead and the request is a guaranteed
404. It now checks the session still exists.
restoreTerminalSize — the header's redraw button and Ctrl+Shift+R — silently
did nothing for a detached session while still reporting success with
dimensions nothing was set to. It now says the session is sized by its own
window, where the same button works.
The `force` comment claimed a client-side dedupe that does not exist; the
deduplication is server-side against the real pane. Corrected to say what the
flag actually buys. The _redock doc comment now records that the function
writes to the server and is not idempotent.
Tests: _redock was the untested half and is the half three of these defects
sit in. It now has coverage for clearing the stale record on both the active
and inactive paths, re-asserting only for the session being shown, and staying
silent for a deleted session. The existing sendResize test now asserts the
local fit still runs.
Opening a session could render its frame with characters spliced into each
other, as though two frames were overlaid — a status-line fragment landing
in the middle of a file path, for instance. Resizing the browser window
cleared it.
The first fit runs while the browser is still painting with a fallback font.
A cell measured against that font has a different width and height from one
measured against the terminal font, so the fit produces the wrong column and
row count. Codeman sizes the pane to it and replays the capture. When the
font finishes loading the measurement changes, the pane is resized a second
time, and the CLI repaints for a shape that does not match the frame already
on screen. Its later partial updates then land on the wrong rows.
selectSession now waits for the font before it measures, so the pane is
sized once, at the size that sticks, and the capture is taken at that size.
The wait always resolves, so a font that never loads cannot block a
terminal, and it resolves immediately once the font is in, so a tab switch
pays nothing after the first load.
document.fonts.ready alone is not enough: it can resolve before the
stylesheet declaring @font-face has been parsed. document.fonts.load for
each family in the stack is what actually requests the faces.
Measured on a session opening at 2328px wide: the cell went from 8.43x16.00
to 8.00x21.00 roughly 900ms in, moving the grid from 112x36 to 118x28 after
the replay had already been painted.
Popping a session out left both windows sizing the same pane. The dashboard
keeps the session active and keeps measuring it, and its terminal is
narrower than the popup because the session rail takes width the popup does
not have. One PTY cannot hold two sizes, so the CLI drew frames that fit
neither window and the popup showed a garbled frame.
sendResize and the debounced window-resize handler now stand aside for a
session this window has marked detached. A solo window is exempt, since it
is the owner. _maybeRefetchFullHistory already stood aside on exactly this
condition, so the rule is not a new one.
Sizing has to come back when the popup closes: while it owned the session
the dashboard sent no resizes, so the PTY still holds the popup's geometry.
_redock now re-asserts, with force, because the dimensions the dashboard
last sent are the ones it is about to send again.
Reproduced with a dashboard and a popup on one session: before, the pane
sat at 315 columns while the popup rendered 289. After, both report the
same size and the popup's frame matches the pane exactly.
Ctrl+V in the terminal inserted the clipboard text twice. Right-click →
Paste inserted it once.
`_handleImagePaste()` appends a hidden contenteditable div, focuses it, and
reads the clipboard out of the paste event that lands there. Two separate
routes deliver that event for a single keypress. The function issues
`document.execCommand('paste')` itself, which in Firefox dispatches a
trusted paste event and then returns false, because the trap cancels the
event and the command never completes; Chromium and WebKit refuse that
command and dispatch nothing. The keydown's own default action delivers the
other, because xterm calls the custom key handler before its own `cancel()`,
so returning false never calls preventDefault. Firefox therefore ran the
trap's listener twice and both runs reached `terminal.paste()`. The
context-menu paste involves no keydown at all, which is why that path stayed
correct.
The trap now accepts the first paste event and cancels every later one, so
how many paste events a browser delivers no longer changes what the PTY
sees. Measured on a live install, one Ctrl+V each: Firefox two events and
two writes before this change, Chromium and WebKit one and one, and every
engine one write after it.
The `execCommand('paste')` call stays. Stripping it out also ends the
doubling, and all three engines still deliver one event without it, since
`trap.focus()` has already run when the key's default action resolves. It is
kept because the trap technique arrived in #84 for plain HTTP and for
mobile, and a desktop measurement says nothing about real iOS Safari or
Android Chrome: where a browser aims the default action at the element
focused when the keydown began, the command is the only route into the trap,
and the trap is the only place clipboard image blobs are read.
test/image-paste-trap.test.ts loads image-input.js into a `node:vm` context
with a fake document and fires two paste events at the trap. It covers text
and images, and fails on the old code with the text pasted twice and the
image uploaded twice.
Docs: the invariant goes into docs/architecture-invariants.md as a Terminal
paste section and into CLAUDE.md as a Frontend entry, both recording the
measured event counts and why the redundant call is still there. README.md
and the Keyboard Shortcuts and Input and Voice wiki pages gain a Ctrl+V row,
which all three tables were missing while listing every other clipboard
binding.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The phone block lifted the toolbar (and padded .main) by (100vh - --app-height) on iOS Safari to clear a bottom bar that position: fixed elements were assumed to sit behind. On iPhone Safari fixed elements already stop above the bar, and 100vh is the large viewport with the bar collapsed while --app-height is the visual viewport with it expanded, so the expression measures the bar's collapsible height and shows up as an empty band between the toolbar and the bar whenever the bar is expanded. The terminal was padded by the same amount.
The lift is now --chrome-overlap, set in updateAppHeight() as innerHeight minus the visual viewport height: the distance the layout viewport that anchors fixed elements extends past the visible area. That is 0 on iPhone Safari, so the toolbar meets the bar, and it is the overlap itself on any browser where fixed elements really do land behind the chrome, so those keep the lift. The keyboard-visible rules, which already override the toolbar offset, are unchanged.
The phone tier stopped at innerWidth < 430 and @media (max-width: 430px), so every current large phone landed in the tablet layout: the 430pt iPhone 14 Pro Max, 15 Plus, 15 Pro Max and 16 Plus, the 440pt iPhone 16 Pro Max and 17 Pro Max, Pixel 6 Pro, 7 Pro and OnePlus 12 Pro, the 448pt Pixel 8 Pro and 9 Pro XL, and the Galaxy Z Fold 5 cover screen at 460. On those devices the header icon row replaced the session pill, the toolbar kept the desktop Run Shell button instead of Enter and the mic, the keyboard accessory bar could never become visible because its .visible rule lives inside the phone block, and the toolbar jumped to the top of the page when the keyboard opened.
The new cutoff is 600, the line test/mobile/devices.ts already draws between large phones (430-599) and small tablets (600-767). No physical device sits between 480 and 600, but a phone zoomed out one or two steps in Safari does: a 440pt iPhone at 85% or 75% page zoom reports 518px or 587px and still needs the phone controls, which a 480 cutoff would have taken away. The phone block is max-width: 599px and the tablet block starts at min-width: 600px, so a 600px device is a tablet in CSS and in getDeviceType() alike instead of straddling the boundary the way 430pt phones did.
The number changes everywhere it is encoded: JS, CSS, comments, CLAUDE.md, the CI tests that pin the phone block, and the test:mobile helpers. Measurement history that names 430px stays as written.
Responds to Ark0N's review round on the ephemeral-CLI-flag statusline
injection rework:
- Rebase-detail fixes: registry-gated telemetry eligibility via
getCli(mode)?.capabilities.statusLineTelemetry instead of a hardcoded
mode === 'claude' check, using the capability flag master's CLI-registry
refactor already declares for exactly this purpose.
- Design question settled: sticky (a). Rather than persisting the toggle
as a new field and threading it through every session-creation path
(cron, Ralph Loop API, quick-start), eliminated the per-session field
entirely. readPlanUsageTelemetryEnabled() (hooks-config.ts) reads the
existing showPlanUsageLimits setting fresh from settings.json at every
claude create/respawn (TmuxManager.createSession/respawnPane) - no
per-session state to survive a restart, and it applies uniformly to
every creation path for free, since they all flow through the same
TmuxManager methods.
This required fixing a real bug found along the way: showPlanUsageLimits
was not actually round-tripping through settings.json on save -
settings-ui.js explicitly excluded it from the PUT body as a pure
per-device display key. It now flows through normally (both true and
false); the load-side per-device merge behavior is unchanged.
Removed entirely as a result: the statusLineTelemetry field from
CreateSessionSchema/SettingsUpdateSchema, CreateSessionOptions/
RespawnPaneOptions, Session._statusLineTelemetry (this is what makes
the restart-persistence bug moot rather than patched), and the
frontend send sites.
- Footer print-through restored: the no-user-statusline branch of the
exporter script now runs the telemetry POST in the foreground so its
own stdout becomes the in-terminal footer, falling back to a plain
"codeman" marker only on curl failure.
- Background-subshell EOF fix: the wrap-a-real-statusline branch closes
stdin too, not just stdout/stderr (`>/dev/null 2>&1 </dev/null &`) -
the un-redirected subshell process itself, not curl, was what held a
reader-to-EOF's pipe open for however long curl took to finish. Added
curl --max-time 5 so a hung (not just refused) Codeman cannot wedge
the render.
Tests: real-shell-execution tests for the footer/EOF fixes (fake curl
stand-in on PATH, real sh subprocess spawns, real elapsed-time
measurements - verified non-vacuous against a hand-reconstructed
old-style script), unit tests for readPlanUsageTelemetryEnabled.
Adapted two existing tests whose payloads referenced the removed field.
Fixed during independent code review: a stray indentation break and a
test exercising the wrong (legacy) exporter code path.
Docs synced: CLAUDE.md, docs/usage-limits-display-plan.md (old
disk-based section marked superseded, kept for history),
docs/architecture-invariants.md.
Full suite green: 352 files, 6780 passed, 12 skipped, 0 failed.
tsc/lint/format:check/frontend-syntax all clean.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
The previous shape guessed the character from `event.key` on keydown, re-emitted
it, and then tried to suppress a late canonical copy with a 250 ms
character-keyed dedupe. Review found three defects in that, all reproducible:
the dedupe matched on the character alone with nothing scoping a candidate to
the keydown that created it, so the same character typed twice inside the window
had its second, real byte swallowed; anything whose committed text differed from
`event.key` (Enter, IME punctuation) was delivered twice, because the dedupe
could never match it; and the trigger ignored `key === 'Unidentified'`, which is
what a soft keyboard reports, so it may never have fired where it was needed.
The input event already carries the committed text in `ev.data` — exactly what
xterm itself would have forwarded — so nothing has to be guessed. The controller
now only decides WHETHER to forward, by asking whether xterm produced canonical
data since the keydown that began the keystroke. No character-keyed matching
survives, so the first two defects are structurally impossible rather than
defended against, and nothing reads `key`/`keyCode`, so the third cannot recur.
Three details are load-bearing and each has a test that fails without it:
- The "did xterm speak?" snapshot is taken at KEYDOWN, not at the input event.
`_keyPress` emits and sets `_keyPressHandled` before `input` fires, so a
snapshot read at input time already contains that emission, reads it as
silence, and delivers the character twice.
- Our `input` listener is registered with `capture: true`. The target is visited
twice in the event path, so a capture listener calling `stopPropagation()`
stops later BUBBLE listeners on that same target; xterm's `cancel()` runs
exactly in the branch where it handled the input, so on bubble we would never
observe handled events, and whether we observed them at all would hang off
`options.cancelEvents`. Measured in jsdom and headless chromium; the table is
in the module header.
- Enter is deliberately no longer special-cased. That mapping is what made the
committed text differ from the re-emitted value in the first place.
The scope is also narrower than the old name suggests, and the browser test now
proves it rather than assuming it. For a keydown that reports keyCode 229 xterm
ALREADY self-rescues, via `CompositionHelper._handleAnyTextareaChanges()`
diffing the helper textarea on a 0 ms timer. A test asserting "we recovered it"
there passes while xterm does all the work, so the browser tests assert WHO
delivered the byte: zero canonical emissions for the genuinely orphaned case,
exactly one delivery for the case xterm rescues itself.
Also addresses review notes: the module gains an `@fileoverview` with
`@dependency`/`@loadorder` and an entry in the load-order list and module
inventory, and the wiring test moves out of the Ctrl+C smart-copy file into its
own. The keydown hook deliberately still runs for every key event rather than
moving behind the 229 gate: gating it would reinstate exactly the blindness
described above, and it is now a single counter assignment.
#386 made Codex conversations resumable from Past Sessions, and
resumeMobileOverviewSession() correctly passes row.resumeId on to
resumeHistorySession(). The phone's own row projection never copied the
field off the unified-list item though, so row.resumeId was always
undefined there and a tapped Codex row started a FRESH session on a thread
that was already on disk. The desktop path worked; only the phone was blind.
The test fails without the projection line, and pins the other half too: a
claude row must not grow a resumeId, since the field is what distinguishes
"resume this conversation" from "start a new one".
Docs: CLAUDE.md and architecture-invariants both still described the unified
list as merging Claude transcript files. It has been three stores since this
PR (Claude's ~/.claude/projects, omp's ~/.omp/agent/sessions, codex's
~/.codex/sessions), the alias field keeps its Claude-era name without being
Claude-only, and the scanner-only rule behind resumeId was written down
nowhere.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
A long orchestration creates one case directory per worker and deleting the
sessions never removed them, so ~/codeman-cases accumulated scratch folders
that were indistinguishable from real projects. They are now labelled and
have a cleanup path.
- src/agent-case-marker.ts: a case dir quick-start CREATES for an agent-driven
spawn gets a .codeman-agent-case.json marker (when, by whom, parent session,
mode). Only the create branch writes it, so a linked case, a cloned repo or
any pre-existing path is never labelled; reading is total, so a malformed
marker means "not agent-created" rather than a half-trusted entry.
- The signal is the new X-Codeman-Agent-Origin header the skill preamble sets
on its shared curl (preamble bumped to 1.22.0), or an agentOrigin body
field, falling back to a resolved parentSessionId so a worker spawned by a
stale skill copy is still labelled.
- GET /api/cases publishes it as agentCreated; GET /api/cases/agent-created is
a read-only cleanup listing adding inUse and modifiedAt; Add Case -> Manage
badges each case and offers a review-then-delete sweep that names every
directory in its confirm and skips any case a live session is working in.
Removal stays on the existing DELETE /api/cases/:name.
- Agent preamble caches are collected too: ~/.cache/codeman-agent-<id>.sh was
written per claude session and never removed (236 leftovers measured on a
working machine). Now deleted with the session and swept at boot, guarded by
a live-session keep set plus a 7-day age floor.
Verified end to end on an isolated instance: marker written for header, body
and lineage-only spawns, absent with no agent signal and for a pre-existing
directory; inUse flipping on session end; badge, sticky bar, confirm and sweep
driven in a browser; preamble seeded on create, removed on delete, boot sweep
taking only the aged orphans.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Android/GBoard-style keyboards fire keydown with keyCode 229 and, on some
paths, never mutate xterm's helper textarea. xterm has nothing to diff, so
it emits no data and the typed character is silently dropped: it never
reaches the PTY and never appears on screen.
terminal-keycode229-recovery.js is a standalone controller that re-emits
exactly those keys, and only once. xterm stays authoritative throughout:
- Only an explicit keyCode 229 keydown carrying a single printable key (or
Enter) is eligible; Process/Unidentified/Dead, modifiers, AltGraph and a
live composition are all left alone.
- The re-emit is scheduled from a microtask and then a zero-delay timer, so
xterm's own textarea diff always gets the first opportunity; canonical
data for the same key cancels the pending fallback.
- compositionstart and blur drop every pending candidate, so a real IME
composition lifecycle is never second-guessed.
- After a recovery, one late canonical value attributed to that key token
(via beforeinput/input on the helper textarea) is suppressed so the
character cannot be delivered twice; the record expires after 250ms and
an unattributed byte is never suppressed.
terminal-ui.js wires it at the two existing choke points — the custom key
handler and the onData registration, the latter now a named handler so the
recovery path can re-enter it — with both hooks wrapped so a failure in the
fallback can never break canonical input.
Unit coverage drives the module directly in a vm; the wiring itself is
covered end-to-end in the (browser-only) terminal-copy-shortcut suite.
master and this branch both rewrote the two `_claudeSessionId` resets inside
`start()`, so `src/session.ts` conflicted at both of them.
master's commit ccfda623 puts `restoredConversation` at the head of each
fallback chain. A restored mux attach means the CLI never stopped, so a
`/clear` before the Codeman restart may already have moved it to a
conversation the launch id knows nothing about. The persisted chain's tail is
that conversation, and the CLI's own hook reported it first-hand.
This branch adds `this._codexConfig?.resumeSessionId` to the same two chains,
so a resumed codex session keeps its thread-id alias across every mux reattach
and boot recovery.
Both fixes belong. Each chain now reads restoredConversation, then
_resumeSessionId, then omp's alias, then codex's alias, then the launch id.
The comments from both sides are kept.
test/session-claude-conversation-chain.test.ts pins the shape of those two
assignments by matching the source text, and its pattern named omp's alias as
the last term before `this.id`. Codex's alias now sits between the two, so the
pattern widens to pin the ends of the chain and let the middle grow. A `[^;]`
run cannot cross a statement boundary, so each match is still one assignment.
Checked on the merged tree: typecheck, lint, prettier and the frontend syntax
check all pass, and the CI suite runs 6721 tests green across 349 files.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The merge-time items from the #381 review. navigator.sendBeacon is not fetch,
so the base-aware wrapper never saw the two crash-diag beacons and a sub-path
install posted them to the origin root every two seconds. The test suite now
strips CODEMAN_BASE_URL like CODEMAN_GESTURE, since the constructor reads it
as a fallback and an operator who exports it would see the root-install
byte-identity assertions fail. test/base-path-server.test.ts boots a real
WebServer under /codeman and checks the ingress strip, the base injection,
the rebased redirects, the 404 envelope and a prefixed WebSocket upgrade.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
#367 (UserPromptSubmit hook): `hook:prompt_submitted` went on the wire
unregistered; it is now in both SSE registries (158 = 158), and the hook only
lands in the run summary when the conversation actually moved, since one row
per prompt would evict useful rows from the 1000-event FIFO and clutter the
Summary timeline and /api/search.
#368 (Add Case header submit): the pending-state dimming targeted the footer
button, which the <=860px layout hides, so on a phone the only visible submit
control stayed at full brightness while a clone ran. The header button now
dims too, and a static test pins the header-submit contract so it cannot
silently disappear again.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Review fixes for #386.
Duplicate rows. A codex conversation showed twice, once live and once as a
past rollout row, because nothing aliased a codex session to its thread id.
That is worse than cosmetic: the stale row still resumes, so clicking it
starts a second `codex resume` on a thread already open in another pane.
- A RESUMED session knows its thread id up front, so it folds from its own
side: add `codexConfig.resumeSessionId` to the `claudeSessionId` chain.
Not only in the constructor — `start()` recomputes that id at two further
points (the mux branch, and the unconditional "third reset point" whose
own comment already warned that omitting omp's fallback there stomps the
mux branch's resolved alias). Both listed Claude's and omp's ids only, so
for codex every mux reattach and boot recovery reset the alias back to
the Codeman id and the duplicate returned.
- A FRESH session has no thread id until codex writes the rollout, so it is
folded from the other side. The scanner now reports
`session_meta.originator`, which is `codeman_<sessionId>` for every pane
Codeman spawns, and `gatherUnifiedInputs()` stamps the matching live and
persisted rows, newest rollout winning (`/new` inside the TUI leaves
several rollouts sharing one originator).
- Persisted rows read `codexConfig.resumeSessionId` too. A resumed session
demoted to a persisted-only record would otherwise lose its alias, and
the originator fallback cannot rescue that one: a resumed rollout keeps
its ORIGINAL session_meta, so it still names the pane that created the
thread rather than the pane that resumed it.
Identity cache. It was written as soon as the thread id was known, but codex
writes the first user message only when the user submits, so any scan in that
window pinned `firstPrompt: undefined` for the life of the process — and the
home screen, the command palette and the search-index refresh all scan.
`shouldCacheIdentity()` now keeps an identity only once the prompt is known or
the head read filled its whole window.
Also from review: both caps count emitted rows rather than file index, so a
store of sub-agent threads no longer spends the `lastPrompt` budget before the
first row that needed it; the cache is an `LRUMap` sized like the one beside
it; the unreachable filename fallback is gone; a rollout recording no cwd is
dropped rather than emitted with `workingDir: ''`; and the unified-session
module header names all three transcript stores.
Tests. The resume wiring now has cases for a row with a thread id, a row
without one, and a `resumeId` on a non-codex row; the "no continuation is
wired" case narrows to gemini/antigravity, which is no longer true of codex.
`codex-resume-alias-survives-start.test.ts` drives a real Session through
`start()` rather than asserting on pre-stamped inputs — that gap is why the
reset points went unnoticed. Plus the maintainer's own cache repro, the
tail-budget case, a no-cwd case, and merge cases for both folds.
Ark0N