A lone repository git could not read rendered as a clean, empty one. The
panel took its single-repository view whenever the overview held one row,
and the error row only exists in the list view, so it showed "Nothing
uncommitted / No remote configured" with an empty header while the
indicator said "? 1". The single-repository view now needs a readable
repository and an untruncated overview; anything else takes the list view
(headed "1 repository"), and the tooltip names the unreadable repository
instead of saying "no branch".
The same condition covers a limit of 1 in a folder of several projects,
now that max repositories can go down to 1: the one row shown keeps the
"Showing the first" notice instead of looking like the only repository.
A repeated timeout query parameter reaches the route as an array, and
calling trim() on it answered 500 with an internal message, before the
ownership check. The route now treats a non-string timeout as "default",
like an empty or absent one, and the route test pins it.
The browser test gains the lone-unreadable-repository case (error row,
no "Nothing uncommitted", "? 1", tooltip names the repository) and the
truncated single-row case. Both fail against the unfixed panel.
The git timeout input steps by 1, not 5: the save accepts any whole
number of seconds and step 5 flagged values like 7 as invalid.
Docs: api-reference says repoLimit is only present in the
folder-of-projects case, the Settings Reference and Working With Files
glyph lists mention "? N", and the module header says the repository
count is the caller's maxRepos.
The PR's own changeset is removed; its text goes into the single
combined release changeset.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Comment and doc corrections that #555 made stale, no behaviour change.
- stock.ts: the grok and omp altScreen comments compared their strip to
opencode's, which is now strip-mux-and-mouse rather than the narrow
strip. Grok now says it shares antigravity's strip until measured, and
omp drops opencode from its comparison.
- terminal-ui.js: the touch-tap comment named Claude/Codex/Gemini as the
stripped modes, but the gate is now the cliMouseTracking flag alone and
covers opencode too, so it names the two stripping flavours instead.
- src/types/session.ts: the cliMouseTracking JSDoc (the flag the browser
now gates on exclusively) listed only claude/codex/gemini; it now names
the strip-full and strip-mux-and-mouse modes, including opencode under
tmux.
- src/session.ts: the usesMux getter doc now names isMuxMouseStripMode,
since the replay strip passes usesMux to it as well.
- docs/architecture-invariants.md: the narrow-strip list gains
grok/deepseek/omp (matching the PR's own CLAUDE.md line), the
"must REMEMBER" heading covers both DECSET-stripping flavours, and the
cliMouseTracking writer is described as the full-or-mouse branch it
really is.
- docs/wiki/The-Dashboard.md: the user manual said every non-Claude CLI
scrolls locally; opencode's wheel and swipes now page its conversation.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
App Settings now refuses a Default Codex model that the server would reject,
before anything is written to localStorage. SettingsUpdateSchema is .strict()
and checks codexModel with ^[a-zA-Z0-9._\-/]*$, so a value like gpt-oss:20b
400'd the whole settings PUT while the toast still said "Settings saved", and
because the bad value was already in the local blob every later save from that
device failed the same way. The client check uses the same pattern, shows an
error toast, focuses the field and keeps the modal open. The toast has a zh-CN
translation in i18n.js.
src/web/codex-launch-defaults.ts gets an @fileoverview (fill only unset fields,
re-validate persisted values, callers decide scope, never writes Codex config
files), as every module in src carries one.
Both new Codex rows in index.html carry has-field, like every other App
Settings field row, so on phones the input and the select stack under their
label instead of squeezing it into a narrow column.
The Agent CLIs wiki paragraph said the defaults apply to every local launch.
Scheduled (cron) codex jobs are built without a codexConfig and never get
them, while Resume goes through POST /api/sessions and does, so the sentence
now names the Run menu, Resume, POST /api/sessions and /api/quick-start, and
says cron jobs do not use them.
The Settings Reference lists the two new rows in the Agents & CLIs table. The
neighbouring "Bypass approvals and sandbox" row described Pi's project trust;
it is the Codex --dangerously-bypass-approvals-and-sandbox toggle, so its note
says that now.
The PR's own changeset is removed: the release writes one consolidated
changeset at COM, and the PR's text overstated the scope (it included cron).
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Move test/sse-tile-grid-filter.test.ts to an ephemeral port. The release
added it with #561 on fixed port 3287, after #556 was cut, so it is not on
the guard's LEGACY_FIXED_PORT_FILES and test/test-ports-guard.test.ts failed
on the merged tree. It now builds new WebServer(0, ...) and its url() helper
reads server.boundPort (only ever called inside tests, after beforeAll).
Converting it is preferred over listing it, since the legacy list is
shrink-only.
Update the five docs that still told contributors to pick a unique fixed
port, which the new guard now rejects for any WebServer test: CLAUDE.md
(Adding Features and Testing), AGENTS.md, .github/CONTRIBUTING.md and the
wiki's Contributing page (mirrored to the public GitHub wiki). They now say
to bind port 0 and read boundPort (or address().port for a raw server), and
note that the mobile suite keeps its fixed ports for now, because
test/mobile/helpers/server.ts caches servers by port, so createTestServer(0)
from two callers would share one server.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
An opencode tile showed only the session name, while Claude Code, codex and
DeepSeek tiles add `· <model>`: opencode declared no `modelDetect`, so its
screen was never read for a model and it is launched without a model param.
opencode draws the model on its composer's agent row, directly above the
box's bottom edge: `┃ Build Big Pickle OpenCode Zen`. Read from its own
1.3.0 source, the row is the agent, the model's name, the provider's name and
`· <variant>` when the model has one, and only colour tells model from
provider. So the field is all of it, exactly what opencode itself shows (the
owner's choice over a short id that only appears after the first reply).
- The pattern anchors on that row sitting directly above the `╹` edge, ends
the field at a double space (where the 200-column layout's sidebar shares
the row), skips the `No provider selected` placeholder, and takes the LAST
such row in the window through a lookahead, so a composer-shaped row the
agent prints higher up can never stand in for it. A test with a forged pair
inside the window fails without the lookahead.
- It reads 8 rows: the home screen puts up to five rows of opencode's own
chrome under the composer (key hints, a tip, the cwd/version row). The
schema's `screenLines` bound goes from 4 to 8, the reader's own cap; the
comment there records why a taller window is only safe with such a pattern.
- A permission prompt or shell mode hides the row; the last model is kept.
Measured against every captured opencode 1.3.0 frame (home screen and in
session, 40/60/120/200 columns, mid-turn and at rest, permission prompt):
the model was read everywhere it is drawn and nowhere else. Live on an
isolated instance from this branch, a restored opencode session published
`displayModel: Big Pickle OpenCode Zen` (source: screen) and its tile header
rendered `oc-home · Big Pickle OpenCode Zen`. The owner's own home-screen pane
on the 1.36.0 beta reads the same.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A gemini session stayed "working" for good after its first turn. Its braille
spinner trips the generic SPINNER_PATTERN and marks the pane working, but only
a composer glyph arms the idle confirmation and gemini declared none, so it
fell back to Claude's `❯`, which gemini never draws.
Measured on live Gemini CLI 0.63.0 panes (capture-pane every 300 ms through
real turns with a shell call at 40, 120 and 200 columns, YOLO and default
approval mode, plus the raw PTY stream). The turns ran against a local
stand-in for the Gemini API (GOOGLE_GEMINI_BASE_URL, which Codeman's custom
endpoint support already sets), since the CLI's TUI does not depend on the
backend and no account is needed for it:
- The TUI repaints its whole bottom region every frame, composer included,
and the composer sits between a `▄` bar and a `▀` bar; the submitted prompt
is echoed between the same bars. The `▀` bar arms the idle check: every
repaint carries it, tmux's reattach repaint too. The composer's prompt
character is no good: it follows the approval mode (`*` in YOLO), and its
`>` also starts the echoed prompt, which would make the submit verifier
read a submitted prompt as stranded and press Enter again.
- While a turn runs a line `⠦ Thinking... (esc to cancel, 6s)` animates about
every 80 ms (largest gap mid-turn: 214 ms). The label can be any loading
phrase, so the working line is the `(esc to cancel, <n>` suffix, or a
spinner frame opening a line for when a long phrase wraps that suffix.
Nothing at rest matches either.
- A tool confirmation (default mode) replaces the composer, stops the
spinner and the pane goes silent (3.9 s gap), so it reads as idle.
Verified on an isolated instance from this branch: a YOLO turn emitted one
session:working (+170 ms) and one session:idle (2.5 s after the last output);
a default-mode turn went working -> idle while the confirmation waited ->
working once allowed -> idle at the end; after a server restart four restored
gemini panes went busy -> idle in about 4 s; a fresh launch settled in 3 s.
The launch-settle and uncharacterised-CLI tests that used gemini as their
example of a CLI without work detection now use grok and deepseek.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A codex session waiting on a background terminal read as plainly idle,
with no "1 background terminal" badge. Codex pins that row above its
composer, and the registry looked for it in the last three non-blank
rows. Codex 0.162.0 added a hint row under the status line at rest
(` ← for agents · ? for shortcuts`), which pushes the chip to FOURTH from
the bottom exactly when the idle probe reads it. Measured live on the
1.36.0 beta with `sleep 600` started as a background terminal: chip,
composer, status line, hint row; the server reported `watching: null`.
While a prompt is typed the hint goes away and the chip is third again.
The codex entry now declares `watchingLines: 4`. The trade is stated in
the entry: with no terminal running, the fourth row from the bottom is
the last transcript row (the last two while typing), which the agent
writes. As before, this is contained by codex having no hooks: a forged
row costs a wrong badge, never a silenced alert.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
An omp session stayed "working" for good once a turn started, the same
latch pi had: omp's braille spinner trips the SPINNER_PATTERN fast path,
and only a composer glyph arms the idle confirmation. omp declared none,
so it fell back to Claude's `❯`, which omp never draws once its setup
wizard is done.
Measured on live omp 18.8.6 and 18.0.11 panes, holding a turn open
against a local endpoint that never answers: the input row is `╰─ <text>`
and is redrawn at submit, at the end of a turn, at launch and on
reattach. While a turn runs, the status bar's leading `π` becomes a
braille spinner plus the elapsed time (` ⠼ 14s > ⬢ model > ...`; 18.0.11
pads it with two spaces, past a minute it reads `1m`), with a
`⎋ Working…` row above it. The registry entry now names the input row as
the glyph and either working signal as the working line.
The glyph also switches the submit verifier on for omp, which reads the
input row the way it reads Claude's composer. A prompt sent mid-turn goes
to omp's Steering queue and clears the row, so the verifier stands down.
Text left in the row after an Enter is the one case it re-presses.
Verified end to end on a sandboxed instance (own HOME and PATH, omp
18.8.6): session:idle at launch, session:working during a turn,
session:idle about 3 s after it ended, and a restored pane settled idle
about 3 s after a server restart.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
An opencode session that ran a tool stayed "working" for good. The running
tool row draws a braille spinner (`⠋ Sleep for 12 seconds...`), which trips
the generic SPINNER_PATTERN and marks the pane working, but only a composer
glyph arms the idle confirmation and opencode declared none, so it fell back
to Claude's `❯`, which opencode never draws. Measured on an isolated
instance: a 16 s turn latched busy/isWorking for the rest of the session.
A text-only turn had the opposite problem and never showed as working.
Measured on live opencode 1.3.0 panes (capture-pane every 250-300 ms through
real turns at 40, 60, 120 and 200 columns, plus the raw PTY stream):
- Every composer row starts with a `┃` bar, and the submitted prompt lands in
the transcript with the same bar, so a turn's first repaint arms the idle
check, and tmux's reattach repaint does the same for a restored pane.
- While a turn runs the footer row starts with an 8-cell knight-rider
spinner, `⬝■■■■■■⬝ esc interrupt`, redrawn about every 40 ms (largest
gap mid-turn: 121 ms). At rest the TUI is silent and nothing on screen
draws a `⬝`/`■` run, the 200-column sidebar included.
- The working line is the spinner run, `[⬝■]{8}`, not the label: tmux ships
`esc` and `interrupt` as separate words joined by cursor moves, so the
label never reaches the stream detector, and at 40 columns the footer
wraps it to `esc` / `interr` / `upt`. All 344 spinner chunks of a turn
match the run after Codeman's ANSI strip.
- A pending permission prompt replaces the composer and stops the spinner,
so it reads as idle (waiting on the user).
- The last `┃` row on screen is the composer's agent/model row, or the
permission box's closing bar, never the prompt text, so the submit
verifier stands down and can never press Enter into a dialog.
Verified on an isolated instance from this branch: a 15 s tool turn emitted
exactly one session:working (+271 ms) and one session:idle (3 s after the
spinner stopped); a permission prompt read idle and the allowed turn went
working -> idle; after a server restart both restored opencode panes (one
at rest, one on a permission prompt) went busy -> idle in about 4 s; a
fresh launch reached an open page as idle in 3 s.
The launch-settle tests that used opencode as their example of a CLI
without work detection now use gemini and antigravity.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A pi session stayed "working" for good once a turn started. pi's braille
spinner trips the SPINNER_PATTERN fast path, which marks the pane working,
but only a composer glyph arms the idle confirmation and pi declared none,
so it fell back to Claude's `❯`, which pi never draws. Measured on beta136:
an errored turn stayed busy/isWorking for 3+ minutes after pi was back at
rest.
pi has no composer glyph. Measured on a live pi 1.1.0 pane (capture-pane
every 250 ms through a turn): its composer sits between two `─` rules, and
while a turn runs it rewrites the top rule as `── ⠏ Working ───` on every
frame. The registry entry now names the rule as the glyph that arms the
check and a spinner frame inside it as the working line.
The same glyph settles a reattached pi pane (a restored pane gets no launch
timer): tmux's reattach repaint carries `─`, which arms the confirmation.
The submit verifier reads the last rule, finds no prompt text and stands
down, so it can never press Enter on a pi pane.
Verified on an isolated instance from this branch: a real pi turn emitted
session:working then session:idle, and after a server restart the restored
pi pane went busy -> idle in about 3 s.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A claude tab drew no harness mark at all and every other agent CLI a
two-letter text pill (DS, CX, ...), so a claude tab read as "no harness"
next to its neighbours. Session tabs (header strip, side rail, sidebar,
phone chips) and the desktop home rail now draw the agent through PR
#532's run-mode-dot <id> slot, the id as data, the same mark the Run
menus and the tile and split headers use. The shell is not an agent and
keeps its SH pill; a CLI added through clis.json gets the slot's plain
dot instead of nothing.
The per-CLI tab pill colours and their light-skin ink overrides are gone
(the monochrome marks follow the tab's own text colour), and the logo
steps aside with the other adornments while a compact rail row renames.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The owner asked to drop the "+" (Add Case) and gear (case settings) buttons
beside the toolbar case picker. Their two actions now close the picker's own
list instead, as "New or link a case…" and "Case settings…" rows in a sticky
footer, so nothing becomes unreachable: on desktop the "+" was the only door to
Add Case (create, link, clone, manage), and the gear the only one to the
per-case Agent Teams / 1M Opus overrides.
The rows are part of the arrow-key walk (after the last case) and Enter runs
them, they also show when nothing matches the filter, and the case settings
popover still opens anchored to the case group. The picker input gets its
right-hand corners back, and the dead .btn-case-add / .btn-case-settings rules
(desktop, phone and two skin selector lists) are gone. Phones keep their own
case sheet and gear.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The owner's picks after testing the 1.36.0 beta:
- Header Stats Style defaults to Compact (two pills with rings) instead of
Tiles. The resolver, the pre-paint stamp and the App Settings option all
agree; an unknown value now reads as compact.
- The Tiles header button is ON by default everywhere but handhelds (their
defaults object keeps it off, and the button still needs a 1180px window).
The Ctrl+Shift+G gate in tileShortcutFor() now resolves an absent key
through the device defaults too, so the chord and the button cannot
disagree; before, it required a stored true.
- Tab Layout defaults to Classic (the single strip, as before). By state, By
case and Ledger stay available as opt-ins. The tile-grid beta the owner used
last had only this layout, and it is the one they wanted back.
zh-CN option labels follow the new "(default)" markers; docs and wiki updated.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
#538's by-state header strip lines its labels up in a column measured into
--tab-triage-gutter by _sizeTabTriageGutter(). Under 600px mobile.css hides
the headings (the phone row keeps its chips, no labels), but the sizer
measured them anyway: every part was 0 wide, yet `width + 5 * (parts - 1)`
made each labelled heading 5, so the "nothing to size" guard never tripped,
the column became 15px and the group key was cached as if measured. A phone
turned to landscape (>= 768px) or a foldable opened (Find N5: folded under
600, unfolded 1124 wide) then crossed into the wrapping strip with no tab
render behind it (the resize handler only calls updateTabOverflowMode()),
the key had not changed, and "WAITING 2" sat in a 15px column on top of the
first tab of its row.
Only the wrapping strip reads the column, so the sizer now measures nothing
and forgets its key while the strip does not wrap, counts only parts that
are laid out (a hidden heading sizes and keys nothing), and
updateTabOverflowMode() calls it right after deciding the wrap. Phones and
tablets therefore never measure (no layout read per render pass), and every
flip into the wrapping strip, the 768px breakpoint included, measures
afresh. The 600px breakpoint only matters below 768px, where nothing is
measured.
Tests in test/tab-triage.test.ts pin that hidden headings size and key
nothing, that the real updateTabOverflowMode() measures on the unfold with
no render, and that wrapping again re-measures with the counts unchanged.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
On phones and 600-767px tablets the header strip stays one horizontally
scrolling row. #538 (Tab Layout, default "by state") orders that row in one
flex `order` band per state, so when the ACTIVE session changes state (a
prompt sent: idle to working; a permission prompt: needs you) its chip
moves to another band while scrollLeft stays put, and the tab in use left
the screen (measured at 390px: x 165 to -870). #257's reveal rules only
covered a CHANGED active tab: _updateActiveTabImmediate reveals on a
switch, and _fullRenderSessionTabs restores scrollLeft and re-reveals only
when _lastRenderedActiveTabId changed, while a state change is an
incremental pass that never reveals at all.
_noteActiveTabBand() records the active tab's band (read off the element,
so it is what is on screen) and reports when it moved while the tab stayed
active. Both render paths reveal on that, in the single scrolling row only
(_isScrollingTabRow: not wrapping, not a vertical list). It is keyed on the
band, not the raw order value, because another tab entering or leaving the
active tab's band shifts that value by one and another tab's move must not
yank a strip the user is browsing. _updateActiveTabImmediate records too,
so the pass right after a switch still counts (viewing a waiting tab spends
its alert and drops it into the idle row). The incremental path reveals
after updateTabOverflowMode(), and only from the branch that reached
_syncTabTriageChrome(), so a pass that falls through to a full rebuild
mid-loop leaves the record for the rebuild to compare.
Tests in test/tab-triage.test.ts pin the reveal on both paths and after a
switch, and that another tab's band change, a wrapping strip, a vertical
list and an active web tab never scroll.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Only the stepper half of #428 lands here. Its other half, the phone case
picker search, shipped separately in #488 (1.33.1) and is kept as it is on
master, so every file of this merge starts from ours and only the stepper
changes are ported onto it:
- index.html: the second `− 1 +` group (#shellCount) after Run Shell is gone.
- session-ui.js: incrementShellCount/decrementShellCount are removed and
runShell() reads the toolbar's one stepper through _readTabCount(), the
helper master grew since #428 was opened (same clamp and absent-element
fallback as #428's _toolbarInstanceCount()).
- run-mode-ui tests stub #tabCount instead of #shellCount, plus #428's
"toolbar instance count" block adapted to _readTabCount() and a markup check.
- wiki: "the instance counter", singular.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The spec's as-built list, the wiki's Tile Grid page and the CLAUDE.md
tile grid paragraph: the button has no native title, its hover card
says the count and what a click and a right-click do, it is the
button's aria-describedby (always present, hidden, kept current), and it
hides in the capture phase on any press, click or right-click so the
count menu never opens beside it.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
opencode's TUI enables mouse tracking. tmux runs with `mouse off`, so it passes
the PANE's DECSETs straight through to the tmux client, and the browser's xterm
obeyed them: `mouseTrackingMode` flipped to 'any' (measured 62 none / 18 any over
16s) and xterm then reported DRAGS to the TUI instead of selecting locally.
In that state marking text produced no selection at all, so copy-on-select
silently did nothing (5/5 dead drags while `any`), and the obvious fallback —
Ctrl+C — is opencode's `app_exit`, which ended the session. Both were hit here.
opencode needs the middle strip: alt-screen toggles AND mouse DECSETs, but NOT
`3J` (a TUI is not a `clear` consumer). That is `altScreen: 'strip-mux-and-mouse'`
+ `isMuxMouseStripMode`, applied to the live stream (session.ts) and the replay
of a stored buffer, now the exported `stripReplayBuffer()` (session-routes.ts).
The browser's mouse-report gate keeps no mode list any more:
`_shouldReportMouseToCli()` reads only `cliMouseTracking`. The server sets that
flag solely in the mouse-strip branch (`_recordStrippedMouseMode`, one caller),
so it can only be true for a mode whose DECSETs are stripped, and whichever modes
the registry strips, the browser follows. Clicks still reach opencode through the
hand-encoded SGR tap it gates.
The `altScreen` JSDoc gets the decision table its three independent choices need
(alt-screen / `3J` / mouse DECSETs), written from the predicates, including that
`preserve` and `strip-mux-only` take the same runtime row. The table is pinned for
every stock CLI, with and without tmux, on both the live strip and the replay
strip, plus the published flag (test/claude-scrollback-strip.test.ts), so the two
halves cannot drift and a mis-ordered replay branch fails.
Docs and comments that still said opencode keeps its mouse reporting or gets the
narrow strip are updated (CLAUDE.md, architecture-invariants, scrollback and
copy-shortcut plans, session.ts, terminal-ui.js).
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
opencode's TUI runs on the ALTERNATE SCREEN (measured on 1.18.31: tmux
`alternate_on=1`, `history_size=0`), so tmux keeps no history for the pane and
the browser's normal buffer never grows past one screen (`baseY === 0`). The
plain wheel therefore scrolled a buffer with nothing in it — dead in every
opencode tab, on desktop and touch alike.
opencode is not a forwarding candidate: it IGNORES SGR wheel reports (six
`\x1b[<64;…M` reports against an idle pane left the capture byte-identical),
but it does page its own transcript on PageUp/PageDown (`messages_page_up/down`,
verified on the same pane). The hollow-buffer rescue already sends exactly those
keys — it was just gated to `claude`. Widen the gate to opencode so the wheel
and touch gestures reach the CLI's own transcript instead of a no-op.
Every other mode stays out: shell/pi own real terminal scrollback, and
codex/gemini/antigravity/grok/deepseek/omp page-key behaviour is unverified
(docs/scrollback-fix-plan.md).
Test: test/terminal-scroll-routing.test.ts — new opencode case (Red before the
fix, Green after); the "real local scrollback is untouched" case now also pins
antigravity as not-paged.
The wiki's Contributing page still warned against bare npm test and pointed at test:ci, from before 947ff6f6 made npm test the CI gate and gave the browser, mobile and perf suites their own runners. It now matches .github/CONTRIBUTING.md and CLAUDE.md.
The tunnel Upload URL page (upload.html) has been broken since the response envelope landed in 458fb81c: it reads j.filename and j.files while the server answers { success, data: { filename } } and { success, data: { files } }, so every upload reported "Saved: undefined" and the recent list stayed empty. Nothing else reads ~/.codeman/screenshots/, and handing a file to an agent goes through POST /api/sessions/:id/paste-image into the session's own workspace, so the page, its Settings row, the suffix branch of the tunnel row helper (now folded into its one caller) and the Upload URL i18n key go.
The three /api/screenshots routes keep working unchanged and log one deprecation warning per process on first use, naming paste-image as the replacement. Per docs/versioning-policy.md they are removed in a later MAJOR, after at least one MINOR release that carries the warning; the docs, CLAUDE.md and the multi-user plan say so.
Static caching: with upload.html gone no HTML is served by @fastify/static any more (every page has its own no-cache route; on a built tree only the precompressed index.html.gz artifact is reachable, as application/gzip, and nothing requests it). The .html branch of setHeaders was therefore dead and goes with the test that fetched upload.html to reach it; a comment now says a new static HTML page needs its own route. The index.html no-cache assertion on the route stays.
A global `.btn-icon-header:hover { transform: rotate(45deg) }`, meant for
the settings gear, turned every header icon button on hover, so the folder,
Tiles, Split and the rest swung their rounded hover background into a
diamond. Three buttons had already cancelled it one by one (the font-size
buttons, notifications, the sidebar toggle).
The rule is gone, and with it those three overrides. Hover motion now moves
the icon only:
- the settings gear's icon turns 45 degrees (one tooth, so it lands on the
same shape);
- the Tiles button's four squares spread apart, each toward its corner;
- the folder cross-fades to an open folder (a second drawing in its SVG,
`.icon-folder-closed` / `.icon-folder-open`);
- every other icon just takes the hover colour.
Pointer devices only (`@media (hover: hover)`, so a tap cannot leave an icon
stuck mid-motion), and the transitions are off under reduced motion.
Owner request: the Tiles and folder buttons "weirdly turn" on hover.
Checked live on a dark and a light skin (rest, mid, end frames). Pinned by
test/header-icon-hover.test.ts, mutation-checked five ways (the button
rotation back, the open drawing missing, the motion not hover-gated, a
square spreading toward the wrong corner, reduced motion keeping its
transition). Gate: 507 files, 9798 tests passed.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Found live: closing the grid with a click starts the single view's
selection, which focuses its terminal when its replay lands, a few
hundred milliseconds later. A right-click on Tiles in between opened the
count menu with the keyboard in it, and the late focus then moved the
keyboard into the terminal while the menu stayed open (3 of 3 tries), so
the arrows, Enter or Escape meant for the menu went to the session's
PTY instead (an Escape arrived there as an ESC byte).
The menu now closes when the keyboard leaves it for another element, as
any menu does. A focus going nowhere (a click on a button in Safari,
which does not focus it) does not count, so a click on a count still
picks it. Live afterwards: the menu either closes as the terminal takes
the keyboard, or keeps it when the replay landed first; never open with
the keyboard elsewhere.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- docs/tile-grid-plan.md: owner decision 10 (right-click Tiles is a
2 / 4 / 6 count menu, default 6, remembered per device; the session
picker is gone; decision 8's "picker on right-click" and "exactly the
stored set" superseded) with the owner's answers on the details; three
as-built bullets (the count menu, the animation, painting first); the
Tiles-button bullet rewritten for the count; the entry points, the
capacity note, the multi-user row and the Escape invariant follow.
- docs/architecture-invariants.md: the Opening paragraph rewritten (the
count, the stored grid in its cells, the menu owning its Escape, the
paced connect and focusOnConnect, the motion rules); the z-index list
names the count menu and the closing grid's still copy.
- CLAUDE.md: the tile grid paragraph and the z-index line.
- Wiki: Tile Grid (the click, the count menu, the animation, reduced
motion) and Keyboard Shortcuts (right-click Tiles).
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Owner feedback 1: "so the empty tab doesnt always have to be the last
one! so I can move freely around and the empty tab can also be tab nr
4 or 3". This replaces the slot refusal of aecada8c.
grid.cells (a session id or null per cell) is now the one source of
truth; grid.ids is a getter deriving the tiles in reading order, so
everything that only wants the tiled sessions (focus neighbour,
cycling, the load queue's order, the picker, closeSession) is
unchanged. The shape still comes from the tile count and the cap
counts tiles, never empty cells.
- A tile dragged onto an empty cell moves there and leaves its own
cell empty, nothing else moving (_moveTileToCell, through
_reorderTiles: no remount, reconnect or reload; only a tile whose
cell size changed fits). A tiled session's tab does the same; a tab
of a session not tiled yet joins in the cell it is dropped on. Each
slot knows its cell and reads "Drop a tab or a tile here".
- Move Tile goes to the adjacent cell: into it when empty, a swap when
a tile is there (tileCellInDirection).
- Removing a tile leaves its cell empty; adding one takes the first
empty cell. A shape change goes through fitTileCells: each tile keeps
its row and column when all fit (2x2 growing to 3x2), else the tiles
pack in reading order.
- Focus never lands on an empty cell: Alt+Shift+Arrows run over the
cells, Ctrl+Tab and Alt+[ ] over the tiles.
- codeman:tile-grid stays ids only: its ids are the cells with null for
an empty one. A reload brings the holes back when the shape is the
same (a session gone since leaves its cell empty), another shape
packs, the old packed format reads unchanged, and a followed
#session= link keeps the holes.
Docs: the spec's as-built bullet (rewritten in place), the wiki's Tile
Grid page and Keyboard Shortcuts, the invariants and CLAUDE.md.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The owner's answers on moving tiles:
- "dont move the tile": an empty slot no longer takes a tile. A slot is
always the last cell, so a move there shifted every tile after it.
Each drop target now says what it accepts (_acceptTabDrops'
`accepts`): a tile takes any session but its own, an empty slot only a
session not tiled yet. A refused drag is still held (dropEffect none,
no highlight), and dropSessionOnSlot refuses a tiled session too, its
tab included. A session not tiled yet still joins on a slot.
- A cancelled drag changes nothing, focus included (best practice): the
header focuses its tile on click, never on press, so a drag that ends
with Escape or outside leaves focus and the idle alert alone. The body
keeps press-to-focus, so focus still moves before a press reaches
xterm. The rename input stops its own clicks.
- A tiled tab dropped on the zoomed tile stays refused (confirmed).
- The Alt+Shift+Arrow focus chords skip a text field too (best
practice), as the move chords already did: shifted arrows select
there. Toggle and zoom are not text-editing keys and are unchanged.
Docs: the wiki, the spec's as-built bullet (with the owner's answers),
the invariants and CLAUDE.md say so.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The wiki's Tile Grid page gets a "Moving tiles" section and the move
chords in its keys table (with what they leave to a text field and
take from a terminal editor inside a tile); Keyboard Shortcuts lists
the chords and the header drag. The spec records moving as an owner
request in its as-built list, with the reasoning behind the default
keys. The invariants and CLAUDE.md say every move goes through
_reorderTiles (no remount, reconnect or reload; only a tile whose cell
size changed fits) and that the header drag carries its own type and
is not draggedTabId.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The digit rule from 21ae48a5 hid the official DeepSeek ids (`deepseek-chat`,
`deepseek-reasoner` carry no digit), so a session on the official route with
the model field on showed the logo alone (its bundle row pins a provider
alone, so the config had nothing either). It also still misread a folder name
with a digit when every field before it was off.
Now the captured field is rejected when it is what the field can be when it is
NOT the model, and read otherwise:
- capabilities.modelDetect.rejectWords (registry data, single tokens, compared
ignoring case; the schema bounds them and requires a screenLine). dsh lists
every effort id its adapters offer (pi-ai THINKING_LEVELS plus the DeepSeek
adapter's off/low/high/max) and the shipped mode ids, from dsh 0.1.1-rc.2 /
dsh-TUI 0.10.0-beta.1. A mode's drawn label (`plan mode`, `full access`,
CJK) can never be one captured field.
- In the shared screen reader, for every CLI: a field equal to the session's
own working-directory basename is the folder, never the model.
Fixtures: `deepseek-chat` and `deepseek-reasoner` with the model field on are
read; every effort id, `default`, `plan mode`, and the folder name first (with
and without a digit) are not; the live qwen footer still reads `qwen3.8-27b`.
Known gaps, all off by default, are named in stock.ts: a custom mode id drawn
raw, a git branch or a one-word session title first, and the non-compact
footer layout (nothing read there; the route config applies).
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- api-reference: the `config` source in the displayModel table, read again at
every pane start, attach and relaunch rather than restored.
- cli-registry: `modelDetect.configResolver` (a named, read-only, bounded
reader), the stock `deepseek-route` reader and its rules, and why the dsh
footer pattern needs a digit.
- deepseek-integration §4: Codeman reads the route for display only, the way
dsh-TUI resolves it; the catalog check it cannot see.
- architecture-invariants (tile grid), tile-grid-plan "as built" (owner
feedback 1), the wiki's model row, CLAUDE.md's source order.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- api-reference: the new `displayModel` session field, its sources in order
(custom-endpoint, statusline, screen, launch) and that it is untrusted
display text, persisted and restored when the CLI reported it.
- cli-registry: `capabilities.modelDetect` (one capture group, the last rows
of the probe's capture, anchored on chrome only that CLI draws), the two
stock patterns (dsh-TUI, codex) and the fifth config regex.
- architecture-invariants (tile grid): the header painter, the id as data, the
untrusted model text, no writes for an unchanged session, the truncation
order, Pane A's strip and its fits through syncTerminalGeometry.
- tile-grid-plan "as built", the wiki's Tile Grid page (logo and model rows,
Split's strips), and CLAUDE.md's tile grid and CLI registry paragraphs.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
computeTileLayout and tileGridCapacity took minTileW / minTileH, defaulted
to TILE_MIN_W / TILE_MIN_H, and no caller or test ever passed them. The
parameters are gone and both read the constants; the spec's signature line
says so.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The invariants for this performance pass: a tile's replay holds the load
queue only while xterm parses it, and destroy() settles a replay in
progress; the main terminal's resize timer refits the split's Pane B
only, leaving grid tiles to the grid's observer; the page's SSE filter
names TILE_GRID_SSE_FILTER while tiles own the terminal; grid tiles send
lines= on their full captures. Plus an "As built" note in the spec, whose
parking section still says the subscription stays [activeSessionId].
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
GET /api/sessions/:id/terminal?full=1 captured the whole tmux history
(capture-pane -S -<history limit>, 100,000 lines by default) and cut it to
`tail` only afterwards, all of it synchronous on the server's event loop.
A grid tile keeps TILE_SCROLLBACK lines plus its screen, so the rest was
captured to be thrown away, once per tile on every grid open, restore and
deploy reconnect. The route now takes an optional `lines=<n>` (an integer
of at least 1, clamped to the configured history limit) and passes it as
the capture's history bound (the existing historyLimitLines, so -S -<n>);
absent or malformed, the limit itself, so every existing caller gets the
same capture as before. Only full captures read it: the visible-frame path
(a shell tile's `tail=` load) reads no history and is untouched. The
capture still ends with its RELATIVE cursor move back to the caret, still
counts as a full capture (isFullCapture: the line-deleting transforms stay
off) and still reports captureCols/captureRows.
Grid tiles (boundedLoad) send lines=<scrollback + rows> on every full
capture of theirs: a TUI load and a shell history pull. The split's Pane B
asks for everything, as before.
Measured:
- A real haiku Claude pane on tileperf (about 3k lines of history):
bounded captures (lines=50, 500, 2000, 100000) against the unbounded
one, 4 PASS 0 FAIL: each a line-aligned suffix of it, ending in the
same relative cursor move (ESC[4A CR ESC[2C), same source
(mux-full-history) and capture geometry. Capture time there 72 ms both
ways, that history being shorter than the tile's bound. As a grid tile
(it sent lines=10047) its screen matched the pane row for row, 47 of
47 at the pane's own 77x47, caret on the composer.
- Six tiles restoring with Claude-style loads (full=1&tail=1MiB forced
on shells with about 19k lines of tmux history each, above the tile's
bound; n=3+3 interleaved, load 4.2 to 7.2): capture per tile med
219 ms [194 to 294] -> 155 ms [127 to 211]; server event-loop delay in
the capture window, max med 262 -> 201 ms; all painted 4.5 -> 3.6 s.
At checkpoint 1 a 30k-line history cost 713 ms per capture (event loop
blocked up to 765 ms each); the bound caps that at the tile's size.
Tests: the route passes lines= through, clamps it, ignores every malformed
form and leaves the visible-frame capture exactly as it was; a bounded
capture keeps its rows and ends in the cursor restore; grid tiles send it
on full captures and the split's Pane B does not. Mutation-checked six ways
(lines ignored, no clamp, a lenient parse, lines on the visible path, the
tile sending none, Pane B sending it). Documented in docs/api-reference.md
(/api/v1 is public).
Scope: PR 2 (the grid's loads; server route plus terminal-tile.js).
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The spec records decision 9 and an as-built entry replacing the "+ / New
session in this case" one, and marks the target picture, the header line
and the + bullet as built without it. CLAUDE.md's header list, the
invariants' z-index line (the + menu's layer) and the wiki's Tile Grid
page (the header string, its table and the cap sentence) drop the +.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Owner request: translate "Run SH" and the rest of the Run family, plus
the two leftovers from the last report.
Run: one pattern turns "Run <code>" (Run CC, Run SH, Run OC, Run CX ...,
and any registry CLI's shortBadge) into "运行 <code>"; the mode codes and
product names stay, and exact entries still win ("Run Shell" was already
运行 Shell, "Run OMP" 运行 OMP, "Run PI" takes the "Run Pi" entry). New
entries: "Terminal / Shell" (the run menu's shell item) and "Send Enter"
(the phone toolbar's Enter button title). The phone overview's Run button
already showed 运行 beside a mode word kept as typed.
Help modal and shortcut overlay: "Tabs", "Toggle Session Sidebar", both
"Copy Selection" rows, "Focus Tabs", and "Wheel" (滚轮, a mouse input like
Click). Key names stay English: the Help modal's Home key, and every key
the overlay renders, now carry data-i18n-skip, because "Home" is also a
dictionary word (the Home button) and showed as 主页 in the key column.
The invariants' paneExit section gains the badge's translation rule
(from the previous commit): its updates compare with the remembered
English, never the DOM.
Tests: i18n-exit-run-help covers every Run label _applyRunMode can show
(its hard-coded ones and Run <shortBadge> for every stock CLI), the
toolbar titles, the Help modal through the real translator in JSDOM (no
English outside the key column, the Home key kept while the word Home
elsewhere still translates, Wheel translated), every shortcut registry
group and label, and that the overlay's keys are skipped.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Drawing only the selected tab's family hid every other connection until you
clicked into one. All families are drawn again (still as routed trees); the
selected tab's families (what it spawned, and the family it was spawned into)
get .lineage-family--focus: 2.5px instead of 1.5px, full opacity instead of
0.75, a larger end dot, and drawn last so nothing covers them.
Lanes follow strip order (cycling through CodemanLineage.MAX_LANES, 3), never
the selection, so a family's lines never move when you click a tab.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Owner request: with App Settings language set to 简体中文, the grid reads
fully in Chinese. Every string the grid puts on screen gets its own
ZH_CN entry, so none reaches the generic leading-verb fallback: the Tiles
button (both states, with the right-click hint), the Tiles and Split
chips, the grid region, the Help modal's Tiles rows, the shortcut
registry's Tiles group and labels (overlay and App Settings list, and
"not bound"), "Open group as tiles", the picker, a tile's +, the header
buttons, the Attach overlay (not attached, attaching, exited, ended, the
hint), the empty slot, the dividers, the Split button while tiles are
open, and the toasts. Strings with a count, an exit code or a duration
are translateDynamic patterns: the cap texts (both wordings, with and
without ": the new session opens on its own"), "This window fits N
tile(s)", the auto-zoom hint, "The agent exited (N)" / "(signal N)", the
crash-restart confirm (the existing confirm wrapper runs it through t();
the session name passes through untranslated, in the single view too),
and the tile header tooltip ("idle 3m"), which requires the duration so
bare state words stay out of the table (they collide with other
surfaces, see mobile-overview.js).
Wording: 平铺 for the feature, 窗格 for one tile, 附加 for attach, 智能体,
案例, as the table already has them. Key names stay; Click, Right-click
(mouse actions) and Arrows in the Help modal's key column are translated.
English reads exactly as before (only additions to the table).
test/tile-grid-i18n.test.ts drives the real tile code through every
state that writes text, harvests each string and requires Chinese with
no Latin word left beyond key names and durations, and the same English
in en; plus the markup through the real translator in JSDOM, and session
and group names (also when they equal a UI word) staying untranslated.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
With the grid closed, Ctrl/Cmd+click on a tab opens what the Tiles button
would show (decision 8) plus that session; the wiki only said it opens
the grid.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Lineage lines used to draw one glowing dashed bezier per parent/child pair,
hanging below the tab strip, for every family at once. With a parent on row 3
of a wrapped strip and ten children below it, the curves crossed every lower
row's tab names and ran through the terminal text.
- One rounded orthogonal tree per spawning tab: every route starts at the
parent, so siblings share a trunk. 1.5px, solid, 1px dark outline; only a
working child's branch is dashed.
- Routes run only through the gaps between tab rows, joined by a spine left of
every row (computeLineageTree/computeLineageRows in constants.js), so they
never cross a tab or reach the terminal. The vertical rail gets the same tree
on its existing left track.
- Only the selected tab's family is drawn (what it spawned, plus its parent and
siblings). Selection redraws, and the strip's size transitionend redraws once
more, since the active tab widens for ~150ms after the selection redraw.
- The routing room is reserved by .session-tabs.lineage-tree, keyed on whether
any lineage exists, never on the selection, so a tab switch never resizes the
header or the PTY.
- Colours stay per spawning tab, now claimed in strip order for every family so
selection order never decides who gets the skin blue.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Owner feedback: the tile header's ⋯ ⤢ + × read as tiny next to the
session name. The buttons inherited the header's 12px font. They are now
26px click targets (min-width, so a wider glyph still fits) with a 16px
glyph, the same as the app header's own icon buttons (.btn-icon-header);
the thin ellipsis and cross get 19px so all four read at one visual
size. The header grows from 24 to 28px to hold them, the inline rename
input to 22px. Checked live at DSF 1 on a dark (daylight-blue) and a
light (paper-gray) skin, focused and unfocused tiles, and a zoomed tile.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Owner decision 8 ("when I hit the tiles button, open the tiles already!").
A click with the grid closed now opens it straight away, and Ctrl+Shift+G
runs the same function (toggleTileGrid), so the two cannot drift. What
opens comes from one pure helper, tileGridOpenSet (constants.js):
a. the grid this tab last had, if any of its sessions survive, opened
exactly (an open split closes and its sessions do not join);
b. else an open split's two sessions, Pane A focused;
c. else the open sessions in tab order (the picker's list: no detached
ones), up to what the grid takes here (the cap of 6, fewer when the
window fits fewer), the active session always among them and focused.
A click with the grid open still closes it.
The picker moved to right-click (oncontextmenu, browser menu suppressed).
With the grid open it is preselected with the current tiles, and Open
replaces them. Ctrl/Cmd+click on a tab with the grid closed opens the
toggle's set plus that session. The button's title, the Help modal and
the wiki say right-click chooses which sessions.
Docs: decision 8 and an as-built entry in the spec (Entry points too),
CLAUDE.md, the invariants (#tile-grid, Opening), the wiki's Tile Grid and
Keyboard Shortcuts pages.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Codeman maintainer