showTileGridButton gets the full per-device treatment Split has: a header
chip in App Settings beside Split, its load and save lines, OFF by default
(and in the handheld defaults), a member of the displayKeys merge policy,
stripped from the settings PUT and never declared in the .strict()
SettingsUpdateSchema (sending it would 400 the whole save).
The setting also gates the Ctrl+Shift+G toggle (the applied default while the
owner's answer is pending; one line in tileShortcutFor to change): OFF, the
chord is inert and reaches the terminal like any unbound key; ON, it opens and
closes the grid where one can open. A grid that is open however it was opened
(Ctrl/Cmd+click, a dropped tab, "Open group as tiles") keeps all its chords,
the toggle that closes it included.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The grid is stored in localStorage `codeman:tile-grid` as
{ v: 1, open, ids, focused, zoomed, colFr, rowFr }: ids, focus, a zoom the
user chose (an automatic one is worked out again from the window) and the
divider fractions, never content. It is written as it changes (layout, focus,
zoom, divider drags); closing the grid keeps it remembered as open: false for
one-click return, and the last tile leaving forgets it. That stored state is
now the only "remembered" grid, so the Tiles toggle, the picker's preselection
and Ctrl/Cmd+click all bring back the grid this device last had, across
reloads. Never written or read in a solo window.
The restore runs INSIDE handleInit, in place of its single-view
selectSession(restoreId, { auto: true }), so with a stored open grid the main
terminal never loads on that page load (its first select would pull a
whole-history capture only to be parked). The stored ids are sanitized against
the session list (deleted, detached and duplicate ids dropped, anything that
is not a v1 object ignored), and the fractions and zoom go back on. A window
too narrow for the grid keeps the single view and the stored grid waits; a
#session= link on load wins and leaves the grid remembered but closed.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Found live: the attach and shell routes report a refusal in the envelope of
a 200 ({success: false}), and Attach read only res.ok, so a refused attach
remounted the tile as if it had worked. It now reads the envelope.
The refusal in question: an agent that exited in a live pane (paneExit, e.g.
a shell ended with `exit 3`) still has the pane's tmux client running, so
both routes refuse to start anything ("Session already has a running
process"), and the single view has no restart for it either. Its tile now
shows the exit with a pointer to Close session instead of an Attach button
that cannot work. A session with no PTY attached, or one whose socket closed
because it exited (4009), still gets Attach.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Three more ways into the grid:
- Drag a session tab from the strip onto a tile: a session not yet tiled
replaces that tile in place (the replaced session keeps running); one
already tiled swaps places with it. A layout that is not full (3 tiles in a
2x2, 5 in a 3x2) shows its empty cells as slots, and a tab dropped on one
joins the grid there. Tiles and slots handle the drag in the capture phase
and stop it, because its payload is the session id as text and xterm's
helper textarea would type it into the PTY; a drag that is not a tab (a
file) is left alone. The dropped session takes focus (a human selection).
A sorted or grouped rail does not offer tab dragging, so neither does this.
- Ctrl/Cmd+click on a tab puts that session in the grid and focuses it,
opening the grid on what the Tiles toggle would bring back if it was
closed; on a window too narrow for the grid it stays an ordinary click.
- "Open group as tiles" in the grouped rail's group menu makes the group's
live sessions (as many as the window fits) the grid.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The grid now places every tile explicitly (grid-column / grid-row, reading
order) with a 6px divider track between columns and between rows, instead of
relying on DOM order and a gap. Track sizes are fractions (grid-template fr
values) that reset to equal whenever the column or row count changes.
Dragging a divider trades size between the two tracks either side, each kept
at the minimum tile size (the pure dragTrackFractions in constants.js, always
computed from the fractions the drag started with, so it cannot drift). The
affected tiles reflow locally at most once per animation frame, with no PTY
resize; each hears exactly one fit (one PTY resize) at pointer-up, and tiles
in other tracks hear nothing. Pointer capture keeps the drag on the divider,
the body locks the resize cursor and text selection for its duration, and
closing the grid or removing a tile mid-drag tears it down, as the split's
divider does. A zoomed grid shows no dividers.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A Tiles button beside Split in the header, opt-in through the per-device
showTileGridButton setting (read in applyHeaderVisibilitySettings; the
settings checkbox, displayKeys membership and schema exclusion follow with
persistence) and hard-gated like Split: hidden by its --hidden marker, a JS
width check with a live media listener, a @media (max-width: 1179px) backstop
and never in a solo window. While the grid is open the button closes it and
reads as pressed.
Closed, it opens a picker: a checkbox per open session in tab order (never one
popped out to its own window; one with no PTY is offered, its tile shows the
Attach overlay), names as text, preselected with the grid this tab last left,
else the active session and an open split's two. Boxes past what the window
can fit are disabled with the count shown, and Open opens the grid on the
checked sessions, focusing the active one if checked. Escape and an outside
click close it; its close method is idempotent and the global Escape handler
calls it.
A tile's + lists the open sessions not yet tiled; picking one adds it and
focuses it (a human selection). A grid that already holds what the window fits
disables the entries. "New session in this case" waits for auto-join.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A tile has no live terminal when its session has no PTY attached (pid null,
e.g. restored after a server restart), when the agent exited in a live pane
(paneExit), or when the server closed the tile's socket because the session
exited (4009, which used to leave only the "session ended" marker). Its body
now says which, with an Attach button, in an overlay laid over the terminal
so the body and its xterm keep their size.
Attach is the single view's own re-attach: POST /interactive (or /shell for a
shell) with NO body, at most one in flight per session, since the route has
no in-flight guard of its own. A tripped PTY-exit breaker goes through the
same confirm before clearBreaker: true, and nothing automatic ever sends it.
On success the tile is remounted onto the new pane (a socket stopped for good
cannot reconnect), keeping the keyboard if it had it; the overlay stays away
while the server catches up, and a failed attach says so and keeps it.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
⤢ in a tile's header, or Alt+Shift+Enter (registry entry zoom-tile, applies
only while the grid is open and is swallowed before the Shift+Enter newline
gate), makes that tile fill the grid like tmux zoom. The other tiles stay
connected but hidden, so they measure nothing and send no resize; pressing it
again restores the grid and refits every tile, since the hidden ones have a
stale size. Zooming a tile that is not focused focuses it first (a human
selection).
As in tmux, moving focus to another tile restores the grid, and so does
removing the zoomed tile or adding one while a tile is zoomed by hand.
When the grid area cannot fit the tiles' minimum size, the grid zooms the
focused tile itself with a hint; that zoom follows focus and lifts once the
window fits again. A zoom the user chose is left alone.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Every tile gets a fixed-height header above its body: `● name ......... ⋯ ×`.
- The dot is the six-state classifier the tab rows and both home screens
share (_sidebarRichRow), with the existing .home-sessions-dot--* classes;
hovering the header says the state and for how long ("working 3m"). A
tile whose session waits on a permission prompt or question gets a pulsing
red border (box-shadow only, never layout; still under reduced motion).
- The name is text with data-i18n-skip; a double-click renames it through
the tab rename's own write queue (Enter or leaving the field commits,
Escape cancels, an IME composition owns Enter), and an in-flight name shows
as already applied, as on the tab.
- ⋯ is the tab rail's session menu (options, new window, close session with
its confirm); × removes the tile ONLY, the session keeps running. Neither
button focuses a tile that is not focused.
- The header is fixed at 24px so nothing in it can resize the body, and with
it the xterm and its PTY (#464).
Every tab render refreshes the headers, so they follow status and name
changes. Tabs of tiled sessions carry .in-tiles (both render paths), and the
tab strip re-renders when tiles come and go.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
tile-grid-park-guards.test.ts carried its own copy of the fake DOM, written
before test/mocks/tile-grid-vm.ts existed, including the remove() that spliced
the wrong element when a child was no longer listed (fixed in the shared copy
only). It now uses the shared harness, which gains what the guards need: a
settable clock behind performance.now, the PerformanceObserver callbacks the
code under test registers, and localFit on the fake tile. Same 35 cases.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Shortcut registry (DEFAULT_SHORTCUTS, group Tiles, all rebindable):
- Toggle Tile Grid, Ctrl+Shift+G: opens the grid this tab last left (one step
back after a selection outside it), else an open split as two tiles, else
the active session as one tile; pressed again, back to the single view of
the focused session. xterm emits nothing for a shifted Ctrl letter; the
browser's find-previous is overridden only where the grid can open.
- Focus Tile Left/Right/Up/Down, Alt+Shift+Arrows: a human selection of the
tile in that direction.
- Remove Focused Tile, unbound: the session keeps running.
tileShortcutFor() decides whether a chord applies (the toggle wherever a grid
could open, the rest only while one is open, so outside the grid
Alt+Shift+Arrows reach the terminal untouched) and is registry-aware. The
capture handler dispatches it, and the main terminal's and every tile's xterm
key handler return false for it, for every event type and before the
Shift+Enter gate, so a chord that applies never reaches a PTY.
Coexistence with the split pane: opening the grid over an open split closes
it (no wasted resize for the pane about to park) and seeds the grid with both
of its sessions, Pane A focused. While the grid is open openSplitPicker and
openSplitPane refuse and the Split button reads as unavailable
(aria-disabled); closing the grid never reopens a split.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
selectSession gets the tile branch, right after its "already active" early
return: a tiled session is focused in its tile (_selectTiledSession: an
activeSessionId change, the shared _refreshSessionPanels and xterm.focus(),
no cleanup, replay, resize or socket of the parked main terminal). Decision 1:
a USER-initiated pick of a session that is not tiled leaves the grid for the
single view (the grid is remembered), and so does an explicit leaveTiles; an
app-driven pick (auto) never collapses it. A followed #session= link passes
leaveTiles (navigation).
App-driven paths pick a tile instead of the first sessionOrder entry:
- closeSession on the focused tile focuses the neighbouring tile (next in grid
order, else previous), captured before the await like wasActive, since the
delete broadcast may already have removed the tile; the last tile closes the
grid and falls back to the normal pick.
- A tiled session deleted elsewhere loses its tile and a neighbour takes focus
with auto (the last one lands on the welcome screen as before); a close from
this tab only drops the tile and leaves the follow-up to closeSession.
- A tiled session popped out to its own window leaves the grid.
Focus rules: pressing a tile is a human selection (pointerdown, never
preventDefault); Ctrl+Tab and Alt+[ / Alt+] cycle through the tiles; only a
human selection acknowledges an idle alert. Home leaves the grid (remembered);
killing every session closes it.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
tile-grid.js (load order 7.6) adds the grid to CodemanApp: openTileGrid,
closeTileGrid, addTile, removeTile and _selectTiledSession, over a
<section class="tile-grid"> that is a SIBLING of .terminal-wrap and takes its
place under .main.tiles-active. Every tile is a TerminalTile with the grid's
one load queue, TILE_SCROLLBACK, a bounded load and its own per-device font
size (codeman-tile-font-size; Ctrl +/- sizes the tiles while the grid is open).
Layout comes from computeTileLayout; one ResizeObserver on the section refits
each tile (xterm and PTY together) on the trailing edge.
Opening parks the main terminal: _cleanupPreviousSession runs once (its
snapshot is right at that moment, and it closes the main socket), and
activeSessionId always names the focused tile's session, so the panels follow
focus. With the main socket closed, every main-terminal path that would write
the focused tile's output into the hidden xterm, fetch a capture for it,
resize it or reopen its socket now stands aside through _tilesOwnTerminal():
the SSE terminal, clear and refresh handlers, the dropped-output recovery,
the completion/error writelns, retryConnection and handleInit (both re-arm the
tiles instead; handleInit keeps live tiles and drops dead ones), sendResize,
throttledResize, the history re-pull, and the WebGL long-task observer, which
watches the whole page and must not count tile renders toward the main
terminal's sticky WebGL disable. The header connection state comes from the
tile sockets.
Closing destroys every tile, invalidates the main terminal's cached content
(snapshot, codeman-xs key, buffer cache) for every tiled id, since it predates
the grid, and replays the focused session fresh in the single view.
_focusedPane() answers with the focused tile and _forEachTile reaches every
grid tile. A tile whose socket stops for good is removed (4003, 4004, 4010) or
keeps its "session ended" marker (4009).
No entry point yet: the grid is opened from the shortcut registry in a later
commit.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
GET /api/sessions/:id/terminal runs synchronous tmux calls on the server, so
N tiles loading at once would stall every WebSocket and SSE stream back to
back (and after a deploy restart all N reopen within the same second).
TerminalTile takes the options PR 1 deferred to the grid:
- scheduleLoad(tile, kind, run): every capture the tile fetches (initial
load, reconnect refresh, server {t:'r'} refresh, shell history pull) runs
when its owner says so. Absent (the split's Pane B), a load runs at once.
- scrollback (the grid passes TILE_SCROLLBACK) and fontSize.
- boundedLoad: a TUI tile loads the bounded full=1&tail= window, never its
whole history.
TileLoadQueue (terminal-tile.js, DOM-free) is that one queue: concurrency 1,
a history pull ahead of background refreshes, then the owner's rank (the grid
ranks the focused tile first, then reading order). A destroyed tile's waiting
loads are dropped unrun, and destroy() aborts the running fetch so the queue
moves on.
Also, for Pane B as well: the load now has a deadline covering the body
(CodemanFetchDeadline), so a capture that never answers cannot hold the
single-flight flag (or the queue) forever; a refresh clears the screen at its
turn rather than when it is asked for; and a close while a load only waits in
the queue writes the disconnected marker at once.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
window.CodemanTileGrid (constants.js), the grid's pure half:
- computeTileLayout: columns x rows by tile count (1x1, 2x1, 3x1 on a grid
area at least 1800px wide else 2x2, 2x2, 3x2, 3x3), capped at 9, and
whether every cell clears the minimum tile size (480x240).
- tileGridCapacity: how many tiles a grid area can hold.
- sanitizeTileGridState: a stored grid (ids only) made safe to apply;
unknown, deleted, detached and duplicate ids are dropped, focus and zoom
must name a kept tile, track fractions must be sane.
- tileNeighbor / tileInDirection / cycleTile: which tile takes focus when one
leaves, on a directional chord, and on Ctrl+Tab or Alt+[ ].
- TILE_SCROLLBACK (10,000 lines, not the primary pane's 50,000) and the tile
font default.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Close Session was bound to Ctrl+W by default. Ctrl+W is delete-word in
every shell, readline prompt and agent CLI, so muscle memory killed the
session (its tmux pane and CLI, with no confirm) mid-sentence, and with
the split pane open it was not even the pane being typed in.
Close Session now has no default key: the capture-phase handler lets
Ctrl+W through and xterm sends ^W to whichever pane is focused. The
action stays in the registry and can be bound in App Settings ->
Shortcuts; the shortcut overlay shows it as not bound. The Help modal,
CLAUDE.md, the split and tile-grid specs and three wiki pages stop
advertising Ctrl+W as kill. Owner decision (tile-grid decision 5).
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
When SSE comes back after a server restart, handleInit's reconnect
branch already re-opens the primary pane's socket; it now also calls
the split pane tile's reconnectNow(), so Pane B no longer waits out its
backoff (up to 10 s between tries) after every deploy. Live: Pane B was
back 4.6 s after the server process respawned, i.e. as soon as it
listened.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
With the split open, every app-level terminal action resolved against
Pane A: Ctrl+L typed into Pane B cleared Pane A's display while xterm
sent the ^L into Pane B's PTY, and Ctrl+Shift+R restored Pane A's size.
_focusedPane() now answers with the terminal focused LAST (a mic or
header click moves DOM focus but not the user's pane): Pane B claims it
from its own textarea's focus, the primary terminal's focus gives it
back, and a destroyed pane never holds it. Ctrl+L, Ctrl+Shift+R, voice
dictation and image paste act on the focused pane. Ctrl+W deliberately
still closes the active session: it kills with no confirm, so moving it
is an owner decision (docs/tile-grid-plan.md, decision 5).
Also destroys every tile after each terminal-tile-input test: a real
reconnect timer from one test opened a socket in a later one and flaked
under full-suite load.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- Pane B registers the primary pane's file-path/URL link provider on
its own terminal, so a path an agent prints there opens the file
preview or log viewer for Pane B's session (it was plain text).
- Ctrl+V/Cmd+V in Pane B goes through the primary pane's paste trap,
aimed at Pane B: a pasted image uploads to Pane B's session and its
path is typed there; text keeps its bracketed-paste markers. xterm's
default handled text only.
Tests pin both the tile wiring and the targeted link provider itself
(registered on the target terminal, opening against the target's
session at click time, the primary's tap-path provider untouched).
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- Font size, family and weight changes refit Pane B AND tell its PTY.
They used to reflow the xterm only, leaving the CLI wrapping at the old
column count, the garbled-redraw class #464 fixed for the primary pane.
- The resize frame reports the size the xterm actually holds, with no
40x10 floor (the divider's 20% clamp leaves about 28 columns), skips
an unchanged size, and is always re-sent on a fresh socket so it
re-registers as a desktop viewer.
- The server's {t:'zc'} geometry report is handled: a different column
count is adopted, rows stay local, using the primary pane's own
reconcilePtyGeometry verdict.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A Codeman restart (every deploy) or a network blip used to leave Pane B
dead, with a marker asking the user to close and reopen the split.
TerminalTile now reconnects:
- A transient close reconnects on the primary pane's backoff ladder
(CodemanWsReconnect) plus jitter; the attempt count resets only on a
successful open. The redelivery sweep's forced close (1005) counts as
transient.
- On reopen the closed state is cleared before the buffer refresh that
closes the output gap, so no stale marker lands under a healthy pane.
- 4003/4004/4009/4010 stop the pane for good and report once through a
new onExit(code) callback; the marker says why.
- Sockets are replaced race-free: the old one is detached before a new
one opens, and every handler ignores events from a socket that is no
longer current. destroy() cancels a pending reconnect.
- reconnectNow() lets an owner skip the backoff.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
TerminalTile used to send every xterm onData chunk as a bare {t:'i'}
frame: no seq, no ACK, silently dropped while its socket was down, and
typing never acknowledged the session's idle alert. Keystrokes and
pastes now go through app._sendInputAsync over the tile's own socket,
registered in the input-socket map while open (HTTP fallback while
not), so they are ACKed, persisted until delivered, redelivered after a
drop, and the ACK clears the idle alert.
What xterm generates on its own stays out of that persisted queue: a
query reply (DA/CPR/OSC) is dropped, as the primary pane drops it, and a
focus or mouse report goes out once via _sendInputEphemeral. The tile's
socket carries the tab identity with a :tile suffix so it can never
evict the primary pane's socket.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Pure move and rename, no behavior change. The split pane's second
terminal (SplitTerminalPane) moves out of terminal-split.js into its own
terminal-tile.js (load order 7.4) as TerminalTile, so the tile grid can
reuse it. terminal-split.js keeps the split orchestration (picker,
divider, auto-collapse) and constructs a TerminalTile for Pane B.
Tests follow the class: split-pane-terminal-unit becomes
terminal-tile-unit, and the Shift+Enter guard and the two browser suites
read terminal-tile.js / window.TerminalTile. The browser suites match
master (one pre-existing environmental failure in both).
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Both read activeSessionId at the END of an async gap, so switching tabs
in between sent the input to the wrong session:
- An image upload inserted its paths with sendInput(), which re-reads
activeSessionId after the uploads finish. It now inserts into the
session the batch was uploaded to, through the same durable queue.
- Voice dictation read the target when the transcript arrived and again
when the send button or the compose overlay's Send was pressed. The
target is now captured in start() (via _focusedPane()), the local-echo
overlay is only used when that target is the active session, and a
target that closed meanwhile gets a toast instead of a 404.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
No behavior change. Prepares the split pane's second terminal (and later
grid tiles) to share what today only the primary terminal has:
- _inputSocketFor/_registerInputSocket/_unregisterInputSocket: the
exactly-once input queue, its ACK handling and the redelivery sweep now
deliver over any registered socket bound to a session, not only
this._ws. ACKs are routed by the receiving socket's session; silence is
judged per socket; a stale handle cannot unregister its replacement.
- registerFilePathLinkProvider, cleanedTerminalSelection,
copyTerminalSelection and _handleImagePaste take an optional target
terminal and session (defaults: the primary pane).
- _focusedPane() is the one place to ask which pane the keyboard is in
(primary only, for now); _forEachTile() replaces the _splitPane special
cases in the font, family, weight, skin and resize paths.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- hooks-config: a probe the bulk cap refused gets ONE bounded re-probe past the
cap (probeBeforeTouching), and whatever is still unknown is skipped. The
per-spawn hook and statusLine helpers used to fall back to an unbounded
lstat/readFile there, which on a dead workspace never settled and could take
the last threadpool workers (and hang the boot hook sweep). New test: cap
engaged, stat/lstat/readFile hanging on two more paths; both helpers return.
- describeUnknownPath()/unknownPathReason(): POST /api/sessions, quick-start and
GET /api/cases/:name now say a folder was not checked (other mounts are still
not answering) instead of blaming a healthy folder at the stall ceiling.
errorCodes unchanged.
- #535 x #516: Create in a custom folder probes the parent through the bounded
probe before realpath/stat/lstat/readdir touch it; an unknown parent is 422
OPERATION_FAILED (UNREACHABLE) within the probe timeout. New test.
- Docs: MAX_STALLED default is 2 (follows UV_THREADPOOL_SIZE), CaseInfo
.unreachable covers a refused probe, the boot sweep skips an unanswering
workspace, a CLAUDE.md gotcha for bounded probes, verbs.md documents the 422
(plugin mirror synced), api-reference documents the custom-folder 422.
- Tests: the launcher case-lookup describe is no longer nested in the Grok
block, and the cap-below-ceiling test no longer depends on an inherited
UV_THREADPOOL_SIZE / CODEMAN_PATH_PROBE_MAX_STALLED.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- createEditCoordinator's finally block rebases the edits queued during a write; one that the write's 409 made inapplicable was dropped with no toast. It is now reported once, like the main loop and adoptExternal do (found by the PR bot's re-review; regression test fails without it).
- At the 32-group server cap the row and group menus no longer offer a new group, which could only fail with an untranslated 'group limit reached'. MAX_GROUPS is exported from tab-layout-browser.js.
- CLAUDE.md names the pagehide keepalive as the one deliberate exception to 'never PUT the layout outside the coordinator'.
- The Dashboard wiki page describes tab groups in the vertical rail row.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- A cached list of repositories below a folder is re-checked against the
Docker case workspaces as they are now, so a repository linked as a Docker
workspace within the 30 s list cache is no longer inspected.
- A diff past runGit's 8 MB output bound is cut short from git's partial
output instead of failing with a 500.
- The browser test waits for its slow route handler on unroute
(unrouteAll behavior 'wait'), so a late route.continue() cannot fail the run.
- "Upstream is gone" now reads "Upstream not on remote", true for a branch
that was never pushed as well as one deleted on the remote; docs mirrored.
- The diff route checks the repository against the workspace's own cached
repository list (findWorkspaceRepo) and refreshes only that repository,
instead of a fresh status of every repository in the folder.
- CLAUDE.md: a Key Patterns entry for the git read surface and its rules.
- The enclosing repository is identified with one cached rev-parse before
any full status, so an unrelated repository above the workspace costs one
process and its failure no longer hides the repositories below.
- Wiki: the bottom-bar indicator moves out of the header-controls table.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- The doctor now judges candidates like the run mode's resolver: the PATH
hit, then each search dir, each one version-checked on its own and
skipped on a mismatch (a wrong `pi`/`grok` on the PATH no longer hides
the real one in a search dir). A search-dir candidate must be an
absolute path to an executable regular file, so a relative dir or a
file without the x bit reads as missing, as it does in the Run menu.
`isExecutableRegularFile` is exported from cli-executable-resolver.ts
and reused rather than copied.
- Every doctor probe passes killSignal: 'SIGKILL'; a --version that
ignores SIGTERM held the probe for its full runtime (15 s vs 5 s
measured with a TERM-trapping script).
- README no longer claims parity with the Run menu or nvm prefixes.
- The Diagnostics panel marks a missing optional tool with ○, a missing
required one with ✗, as the terminal doctor does.
- expandSearchDir names its twin, expandHome() in cli-resolver.ts.
- test/doctor-cli-json.test.ts is hermetic: temp HOME, a PATH of only
`which` and `node`, and a clis.json that drops the registry's absolute
search dirs, so it never runs the machine's installed agent CLIs.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- Route test hygiene: each test works in its own mkdtemp folder, every
deletion goes through safeRmHomeTree, and the suite refuses to start
outside test/setup.ts's temp HOME, so a raw `npx vitest` can no longer
delete a real ~/projects or the live linked-cases registry.
- Path policy: the symlink-resolved target is also judged against the
resolved home, data dir and system roots (home reached through a link,
macOS /etc -> /private/etc); test expectations are realpath-safe.
- Refuse a target equal to or inside the caller's or the shared cases
directory, pointing at plain Create New (it would list twice, and
deleting the local copy removes files).
- The registry re-read comment no longer claims to prevent the
lost-update race; documented as narrowing it, like /api/cases/link.
- UI: the success toast names the folder the server created, the
"under ~/codeman-cases" blurb and name hint change while a custom
folder is ticked, a "/" parent previews and sends /<name> instead of
an empty path, and the new labels have zh-CN entries.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The behavioural check for the detailed-rail rename clamp (#534, #526) lives in test/inline-rename.test.ts, a browser suite the CI gate does not run. This pins the cascade from styles.css itself, from computed selector specificity and source order, so a later clamp rule cannot silently out-rank the shared unclamp again. Mutation-checked: deleting the detailed-rail twin fails exactly that case.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
fix(cases): bound path probes for linked workspaces and session creation, so an unreachable mount cannot freeze the server
# Conflicts:
# src/web/routes/case-routes.ts
feat(ui): git status indicator in the bottom bar, with a panel of uncommitted and unpushed work
# Conflicts:
# config/test-suites.ts
# docs/api-reference.md
- applyWorkspaceHooks: an "unknown" probe that is not near a stalled path
(refused by the stall cap, or an unexpected stat error) no longer reads as
"go ahead". It checks existence with pathExistsForWrite first, so a deleted
workspace is not recreated by the mkdir -p in ensureCodemanHooks.
- pastCap gets a hard ceiling, PATH_PROBE_STALL_CEILING = UV_THREADPOOL_SIZE
(default 4) minus one, so explicit requests against several dead paths can
never take the last libuv worker. The bulk cap now defaults to one below the
ceiling (2 with the default pool), leaving a slot for an explicit request.
- A stall widens to its mount only for network and FUSE filesystem types read
from /proc/self/mounts; on a local mount (a path typed under a local /home
that reaches a NAS through a symlink) it narrows to the stalled path.
- GET /api/cases/:name probes CLAUDE.md with pastCap, like the folder probe.
- Comment in config/path-probe.ts describes the mount-scoped stall.
Reopening the editor over a rename still in flight filled it from the name
the server had not replaced yet, so dismissing it (blur commits) queued the
old name behind the new one and undid the rename. The queue now records the
newest queued name per session (_inlineRenamePending, cleared with the queue
entry), and a reopened editor takes its prefix, input and "unchanged"
comparison from it. An untouched confirm sends nothing more.
A failed write only toasted while its editor was still current. The queue
reports the failure itself now, and the editor only puts its label back.
One rejected task blocked every later rename of that session until reload.
Each task now chains from a settled predecessor, the local apply after a
successful PUT is guarded, and the queue entry is cleaned up on either
outcome.
The rail and sidebar editor's 4rem floor moves from a stylesheet
`!important` into the inline min-width startInlineRename already writes per
layout (0 in the header strip, 4rem in the rail and sidebar).
Tests: the reopened-editor case now expects only "First" to be sent; new
cases cover a 500 answered after the editor is gone and a throw in
updateSubagentParentNames; the long-prefix check runs in the sidebar and
detailed sidebar too and asserts the inline floor; the header strip editor
keeps min-width 0.
Two problems with renaming a tab in the vertical rail, both easier to hit now
that the grouped rail has its own inline editor beside the session one.
Writes. A committed rename PUT its name and only applied the answer if the
same editor was still open when it came back. Reopening the editor before the
PUT answered (F2 or right-click again, or starting a group rename, which
cancels the session editor) threw the confirmed name away, so the tab kept
showing the old name until an SSE frame happened to repaint it. Two quick
renames also raced as two concurrent PUTs. Inline renames now go through a
per-session queue: one PUT at a time in the order they were made, the
confirmed name applied to app.sessions whatever happened to the editor, and
the "already that name" check made when the write runs rather than when Enter
is pressed, so confirming the name still on screen over a write in flight is
a real write.
Layout. The editor (a flex row) could not shrink below the input's intrinsic
width, so a long w<n>-<case> prefix pushed the label past its row: the prefix
slid out of view in the detailed rows and the input was clipped mid-word in
the compact rail. The label now has min-width 0, the prefix gives way first
(down to 2rem, with an ellipsis), the input keeps 4rem, and in the compact
rail the row's adornments step aside while the name is edited. The detailed
rows' three-line clamp also outranked the shared unclamp rule, which is what
the existing "unclamped editor" browser test caught; it is restated there.
Header strip, sidebar and flat-rail markup are unchanged.
Tests (test/inline-rename.test.ts, browser suite): the unclamp check runs for
simple and detailed rows; a write-ordering describe covers ordering, a
reopened editor cancelled over a confirmed write, a re-sent unchanged name and
a group rename taking over; a long-prefix describe drives real rows from a
live session in simple, detailed and compact rails.
- never inspect a repository at or inside a Docker case workspace (walk-up, scan, diff route): git would run its clean filters on the host
- a branch whose upstream was deleted and pruned reports upstreamGone and falls back to commits on no remote, instead of green
- turning the setting off during a poll releases the in-flight flag
- log.showSignature=false; reword the docs: clean filters still run
- CLAUDE.md frontend load order, changeset names git-diff
- discovery reads a bounded, sorted directory listing; leading-dash paths allowed; diff 500 redacts credentials
- keyboard focus survives the poll re-render; panel stays on screen on narrow viewports; aria-expanded visible on light skins
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01JrzFKEdBLwVfu6ev2ZscJS
The Git window shows each group's files under their folders, collapsed until clicked, with single-child folder chains merged and open folders surviving the refresh. App Settings → Bottom bar → 'Git status: group files by folder' (per device) switches back to the flat list.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01JrzFKEdBLwVfu6ev2ZscJS
Rows open an in-panel diff (staged, not staged, untracked as additions, deleted as removals) via GET /api/sessions/:id/git-diff, with Back and Open file. The route matches repo and path against the current status, runs git diff read-only (--no-ext-diff --no-textconv), and caps output at 400 KB.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01JrzFKEdBLwVfu6ev2ZscJS
- doctor probes each CLI's discovery.searchDirs when which misses and runs --version on the resolved path, so a service with a minimal PATH no longer reports installed CLIs as missing
- GET /api/doctor shares one in-flight run per category
- Diagnostics group hidden from non-admins in multi-user mode (_applyDoctorAdminGate)
- 500 uses INTERNAL_ERROR; a killed child reports 'timed out after 30 s'
- browser test blocks service workers so page.route() is reliable
- wiki: Diagnostics sentence
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01JrzFKEdBLwVfu6ev2ZscJS
The bounded path probe answered "absent" both when a path did not exist and
when it simply did not answer, so a stalled linked case 404'd and the Run
button scaffolded a stray local case over it, and two stalled paths anywhere
made every unrelated path read as absent (hooks skipped, statusLine
overridden, the clone warning lost).
- probePath()/probePathKind() are tri-state: present (or directory/file),
absent (ENOENT/ENOTDIR only) and unknown (timeout, other errors, refusal).
boundedPathExists() stays as the display-only boolean.
- A stalled path takes only its own mount out of probing (deepest mount
point from /proc/self/mounts, never /; just the path itself when there is
no mount table). Unrelated paths keep probing. The process-wide cap is a
backstop that answers unknown, and a single-path user request can probe
past it ({ pastCap: true }), still bounded and still recorded as stalled.
One console.warn when a path first stalls and one when the cap engages.
- GET /api/cases/:name keeps NOT_FOUND for definite absence only. An
unreachable linked case answers with its registered path and
unreachable: true; a local one answers OPERATION_FAILED. runClaude and
runShell create a case only on errorCode NOT_FOUND. The case list keeps an
unreachable linked case, marked unreachable, instead of dropping it, and
fix-plan reports an unreadable plan as an error, not "no plan".
- applyWorkspaceHooks and the statusLine helpers skip only a workspace that
is absent or on the stalled mount; a capacity refusal no longer stops
hooks being installed elsewhere, and an unreadable settings file never
lets the exporter override a user's own statusLine.
- The clone flow's repo-settings warning is back on its synchronous check,
and stripCaseEnvKeys uses pathExistsForWrite.
- POST /api/sessions (workingDir) and POST /api/quick-start (case folder)
probe with the bounded probe instead of statSync/existsSync. Missing and
non-directory keep INVALID_INPUT; unknown is OPERATION_FAILED, and
quick-start never scaffolds over a folder that did not answer.
- PATH_PROBE_TIMEOUT_MS and MAX_STALLED_PATH_PROBES move to
src/config/path-probe.ts, overridable via CODEMAN_PATH_PROBE_TIMEOUT_MS
(default 1500) and CODEMAN_PATH_PROBE_MAX_STALLED (default 3), and are
documented in the Settings Reference.
- The probe is exported from the utils barrel and imported from there.
- Pointer drag: a press released outside the rail no longer lingers. The
release is heard on window while a press is pending, a move with the
primary button up cancels it, a new press cancels any previous drag, and
an existing Escape listener is removed before another is added, so no
orphaned capture listener can swallow Escape before the terminal.
- Inline group rename: a commit by blur leaves focus where the user put it;
Enter and Escape still return focus to the header.
- A failed layout read while edits are pending keeps the held layout and the
editor and re-reads once the write settles, so a 409 is still rebased.
Dropping unsaved work now always says so in a toast.
- "Move to <group>" quotes the group name (with a matching zh-CN pattern), so
a group named "New group" or "ungrouped" no longer reads or translates like
the fixed entries.
- The group menu glyph stays visible under (hover: none).
- The sessionStorage replay copy carries { owner, baseVersion, savedAt } and is
ignored for another owner, after 60 s, or against an older layout. A move
with no anchor carries no index, so a replay keeps the row last.
- A 400 that survives the re-read is reported as "Could not save tab groups."
- closeTabRailActionMenu() no longer removes the group menu's DOM.
- Cancelling "Delete group" returns focus to the header.
- Stale comments updated.
The grouped vertical rail can now be edited from the browser: groups are
created, renamed, reordered and deleted, and tabs are moved between them, by
menu, keyboard or pointer drag. Every edit is saved through the existing
PUT /api/tab-layout; there are no server changes.
Saving (tab-layout-browser.js, pure):
- Edits are named operations (createGroup, renameGroup, deleteGroup,
reorderGroup, moveRef) applied to the rail at once, mirroring the server
model: a moved session takes the sessions that still follow it, and a
hand-moved child is marked placement 'manual'. normalizeLayout now keeps
placement and updatedAt, since whole layouts are written back.
- createEditCoordinator keeps ONE PUT {baseVersion, layout} in flight. Edits
made in the same turn share a write; edits made while one is in flight go
out on the version it returns. A 409 replays the operations onto the
layout the server returned and retries (bounded); an operation that no
longer applies is dropped and reported. A 400 re-reads first; any other
failure reports and re-reads.
- dropOperation maps a finished drag to one operation, or null for a drop
that changes nothing.
Wiring (app.js, tab-rail-resize.js):
- The session row menu gains Move up/down, Move to <group>, Move to
Ungrouped and Move to new group in the vertical rail. Before the first
group exists it offers only "Move to new group", which is how a flat rail
becomes grouped; the header strip's menu is unchanged.
- A group header opens its menu with Shift+F10 / ContextMenu, right-click or
a hover glyph (a non-focusable aria-hidden span, so the treeitem still
holds no interactive child): Rename, New group, Move group up/down,
Delete. F2 renames inline. A web tab row's Shift+F10 opens its settings
plus the same moves.
- The menu closes on Escape (consumed before the global Escape handler, focus
back to its row or header), a pointer outside, Tab, focus leaving it, a
resize, a second open and any full re-render.
- Inline group rename shares the session rename's ownership handle, so only
the current editor releases the render guard. Enter or blur commits,
Escape cancels, IME composition keys are left to the IME, and the label
becomes a flex slot so the editor gets the full width while typing.
- Pointer drag (mouse and pen) in the grouped rail only: rows before/after a
row or into a group, a header drag reorders groups. Escape cancels; the
click that ends a drag neither selects nor toggles. The flat rail and the
header strip keep their HTML5 drag untouched.
- A tab:layoutChanged read is deferred while a write is in flight and run
once it settles; a read otherwise rebases unsaved edits. On pagehide,
unconfirmed edits go out in a keepalive PUT and into sessionStorage, and
replay after reload (a no-op when the keepalive landed).
- New strings have zh-CN entries; group names reach the DOM only as text.
Unchanged: the flat rail's markup when no group exists, the tree semantics
and single roving tab stop, sessionOrder and Alt+N.
Tests: test/tab-layout-editing.test.ts (operations, coordinator, drop
mapping, menus, rename, dismissal, SSE deferral, reload recovery, flat-rail
identity) and test/tab-layout-editing.browser.test.ts (real pointer drags,
editor paint, menu Escape), listed in BROWSER_TEST_GLOBS.
A linked case can live on a network mount. When that mount goes away, a
hard mount makes stat() wait indefinitely, and the existsSync() probes in
the case routes and the workspace hook/statusline helpers ran on the event
loop, so a single GET /api/cases (or a session create in that workspace)
froze the whole web server until the mount came back.
Add boundedPathExists() (src/utils/bounded-path-probe.ts): an async stat
that answers "absent" after 1.5 s, shares one in-flight probe per path,
remembers a timed-out path until its stat finally settles, and refuses to
start new probes while two stalled ones still hold libuv threadpool
workers. Route the read-side probes in case-routes.ts and hooks-config.ts
through it. The settings writers in hooks-config.ts use an async lstat
that treats only ENOENT as missing, so an unreachable workspace is never
mistaken for an empty one and has its settings recreated.
Codeman maintainer