* feat(cli-registry): add cliManagementEnabled flag and GET /api/clis
Phases 1-2 of docs/cli-enable-disable-plan.md ("PR C" from the #343
review): a synced, default-OFF master flag gating the upcoming CLI
management surface, plus a read-only GET /api/clis endpoint listing
every registry entry (stock + custom, enabled or not) for the
Settings UI. Non-admins in multi-user mode see an empty list rather
than a 403. Write endpoints, auto-install, custom entry CRUD and the
Settings UI list itself land in later phases.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GuHtuPiHXdykq9T6rKQJ9n
* feat(cli-registry): Phases 3-6 - write API + custom entries + Settings UI
Completes docs/cli-enable-disable-plan.md ("PR C" from the #343 review).
Phase 3: PUT /api/clis/:id toggles enabled for any EXISTING entry (stock or
custom) via a shallow merge onto its clis.json override; shell/claude are
structurally un-disableable (Decision 4), an unknown id 404s rather than
becoming a creation backdoor.
Phase 4: POST /api/clis/:id/install runs a STOCK entry's already-vetted
install command (shell:true, bounded by timeout, process-group killed on
expiry, output captured, audit-logged). A custom entry's id is refused
outright, independent of anything Phase 5 does (Decision 3: a custom
entry's install text is display-only, never executed).
Phase 5: POST /api/clis (create) / PUT /api/clis/custom/:id (update) /
DELETE /api/clis/:id (custom only) — a deliberately minimal request shape
(id/label/shortBadge/binaries/a simple launch variant), assembled into a
full CliEntry with conservative capability defaults and re-validated
through CliEntrySchema before writing, never a relaxed path for
UI-originated entries. Stock-id collisions, duplicate custom ids, and
edits/deletes against a stock id are all rejected explicitly.
Phase 6: the Settings UI section (App Settings -> Agents & CLIs), gated
independently on cliManagementEnabled AND admin-in-multi-user-mode
(Decision 5), fetching/rendering GET /api/clis and wiring every write
endpoint above.
Every write endpoint answers the same way when the feature is off: 403
FORBIDDEN via one shared requireCliManagementGate() (Phase 1's own
checklist item). registry-writer.ts is a new, deliberately separate write
module so registry.ts itself stays import-side-effect-free, same tmp+
rename+0600 shape as custom-model-hosts.ts.
27 new/updated route tests covering every gate, collision, and cleanup
path; full CI gate green (415/416 files, 7854 tests).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GuHtuPiHXdykq9T6rKQJ9n
* fix(cli-registry): toggling a CLI off in Settings never hid it anywhere else
window.__codemanCliAvailable — the flag isCliAvailable() reads client-side
to gate the welcome-screen buttons, the Run-menu dropdown and the mobile
overview — was built purely from each CLI's own installed-on-PATH resolver
(isClaudeAvailable() etc.), with no reference to the registry's `enabled`
flag at all. So disabling a CLI via the new Settings UI (or a hand-edited
clis.json) updated the settings row and nothing else: every launch surface
kept offering it, both live and after a full page reload, since even a
fresh render never consulted the registry.
Fixed in two places:
- server.ts: after building `available`, intersect the nine real
SessionMode ids against `enabledClis()`. git/cloudflared (utility
binaries, not CLI registry entries) and deepseekBinary (a secondary
installed-only flag for the "add a profile" affordance) are deliberately
left alone.
- settings-ui.js: `toggleCliEnabled()` now patches
`window.__codemanCliAvailable` in place and refreshes the welcome screen,
the mobile overview and an already-open Run menu, mirroring the existing
`installDeepSeekProfile()` pattern for the same "injected once, needs an
explicit patch" reason — without this half, the server-side fix alone
still left every surface stale until the next reload.
New test in test/render-index-html.test.ts: an installed-but-disabled CLI
(codex, forced via clis.json + reloadCliRegistry()) reads as unavailable,
while an installed-and-enabled one (claude) is unaffected by the override.
Verified on the Debian devbox (codeman-devbox, real tmux — this sandbox has
none and WebServer's constructor hard-requires it): typecheck clean, the
new test passes (17/17 in render-index-html.test.ts), the CLI-registry
suites pass (86/86), and the full CI gate is green (415 test files, 7855
tests, 0 failures).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01N6eadpRyqpA9PD3i139cSD
* docs(cli-registry): update the CLI-management plan with status, gotchas, and the Run-menu gap
Phases 1-6 were implemented across two commits (da07b38c, db4557d9) with no
corresponding update to the plan doc itself — every checklist still read
Status: TODO and every box unchecked. Brings the doc in line with the tree:
- A new "Status as of 2026-09-22" section up top: what's actually
implemented (verified by grepping the routes/schema/UI, not just trusting
the commit messages), the availability-flag staleness bug found and fixed
in this session (commit 0c77dd0a) with its devbox verification record, and
one real outstanding gap.
- The outstanding gap: a custom CLI created via Phase 5's write API has no
way to actually be launched. The Run menu is static per-mode markup with
no consumer of window.__codemanCliCatalog, so Phase 6's own "create a
custom entry, confirm it can be launched" verify step was never actually
exercised against this. Documented with two candidate fixes, neither
started.
- Each phase's checklist flipped to [x] where confirmed present in the tree,
Status lines updated from TODO to DONE, and the two originally-open
questions (Phase 2's installed source, Phase 5's PUT endpoint shape)
marked resolved against what actually shipped.
No code changes in this commit — documentation only, so a future session
(or the one already mid-flight on a separate checkout of this same branch)
picks up accurate status instead of a stale plan.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01N6eadpRyqpA9PD3i139cSD
* docs: add the CLI-registry deployment plan and the parked Copilot plan
Both were sitting as untracked scratch files in the master checkout,
never committed to any branch. Moving them here rather than leaving them
loose:
- DEPLOYMENT_PLAN.md is the live tracker for the CLI-registry follow-up
series (PR A #347 merged, PR B #380 merged, PR B2 merged as #458) and
is where PR C (this branch's own CLI-management work) belongs.
- docs/copilot-integration-plan.md is explicitly PARKED, referenced by
name in docs/cli-enable-disable-plan.md's own header as a sibling plan
tracked separately — kept for continuity, not active on this branch.
The other scratch files found alongside these (PRA.md, PRB.md, PR-B2.md
and their review-response counterparts) described PR A/B/B2, all now
merged — deleted from the master checkout as stale rather than committed
anywhere, since their content is superseded by the real merged PRs.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01N6eadpRyqpA9PD3i139cSD
* fix(cli-registry): render enabled CLIs in launch surfaces
* test(cli-registry): update frontend branch guard
* fix(test): isolate suite from deployment environment
* fix(cli-registry): revise Decision 4 - claude is toggleable, shell stays permanent
shell/claude were both structurally un-disableable in the original plan
(Decision 4). Revised: shell keeps the hard backend guarantee (it is the
one non-agent mode several code paths assume always exists as a raw-
terminal fallback), but claude is now a normal toggleable entry like any
other CLI.
Safe to do because internal session creation (tmux-manager.ts, session.ts,
Ralph, plan-orchestrator) resolves a CLI via getCli(), which does not
check `enabled` at all - only the Run menu and the HTTP-facing
sessionModeSchema() (new session requests through the normal API) key off
it. Disabling claude therefore behaves identically in kind to disabling
any other CLI: no internal fallback path breaks, it just stops being
offered for new sessions until re-enabled.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GuHtuPiHXdykq9T6rKQJ9n
* fix(cli-registry): hide shell's toggle entirely instead of greying it out
A permanently-disabled switch next to every other row's working toggle
read as broken rather than intentional. shell now renders no switch at
all - a plain "Always available" label - so there is nothing to click
that could look like it should work but doesn't. Backend guard is
unchanged (UNDISABLEABLE_IDS still refuses shell unconditionally); this
is UI-only.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GuHtuPiHXdykq9T6rKQJ9n
* fix(cli-registry): sort the Installed CLIs list, installed-first then alphabetical
renderCliList() previously rendered in registry order (each entry's fixed
order field). Now sorts installed CLIs first, then not-installed, each
group alphabetical by label - matches how a user actually scans the list
(what's ready to use, then what needs installing).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GuHtuPiHXdykq9T6rKQJ9n
* style: prettier fixes from the master merge
* fix(cli-registry): install/edit take effect immediately, confirm before install, phone labels
Four gaps found verifying #476 against the #343 review trail:
- Installed or edited CLIs kept reading as missing/stale. Every binary lookup
(the nine per-CLI resolvers and the generic registry one) caches in its own
closure, with a negative-cache backoff of up to 5 minutes, and nothing
cleared them. invalidateCliExecutableResolvers(binaries) now drops those
caches per binary; install (success or failure), create, edit and delete
call it plus invalidateCliResolverCache(id). Before this, a CLI installed
from Settings could fail to launch for minutes, and an edited custom entry
kept launching its old binary until a restart.
- The Settings "installed" badge for a custom entry used a private `which`,
ignoring the entry's searchDirs and the login-shell lookup that spawn and
the Run menu use; it now asks the same generic resolver they do.
- Install ran on a single click. The #343 review asked for auto-install to
sit behind an explicit confirm; the confirm now names the exact command,
which GET /api/clis returns for stock entries only (installCommand).
- The phone Run button showed the two-letter tab badge ("CC", "CX") instead
of the word ("Claude", "Codex"). It uses the registry label again, which is
identical to the old static table for every stock CLI (now pinned).
14 new tests; 9 of them fail against the previous head and pass here.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GuHtuPiHXdykq9T6rKQJ9n
* fix(cli-registry): address #476 review — safe serialized writes, no id branches, docs
Must-fix:
- registry-writer: start fresh only on ENOENT; refuse (409) a clis.json that
does not parse or has group/world permission bits instead of overwriting it
(isUnsafePermissions now exported from registry.ts)
- mutateRegistryFile(): one promise chain for every mutation, with the
existence/duplicate checks inside the serialized step, plus a unique tmp
name per write
- docs: CLAUDE.md, architecture-invariants, cli-registry (new Settings
section) and api-reference (the six /api/clis routes)
- drop DEPLOYMENT_PLAN.md and docs/copilot-integration-plan.md
Smaller:
- PUT /api/clis/custom/:id keeps the entry's current enabled state when the
body omits it
- runMode setter falls back to the first enabled catalogue entry, not 'claude'
- shell guard keyed on kind === 'shell' (routes + Settings list); stock probe
map shared with server.ts via utils/cli-installed-probes.ts
- stock claude label is now 'Claude Code', so the Run menu / phone overview
label rewrites are gone (doctor row keeps "Claude CLI" via its override)
- welcome buttons are translatable again and read "Run Claude Code" /
"Run Shell"; zh-CN gains "Run Codex" / "Run OMP"
- install: per-id in-flight guard (409) and CODEMAN_* stripped from its env
- fileoverview / CliEnableSchema comments no longer say stock-only
- test-env isolation changes moved to their own PR
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GuHtuPiHXdykq9T6rKQJ9n
* test(cli-registry): pin the #343/#347 findings #476 makes reachable
A CLI toggled or created through the routes is accepted or rejected by
CreateSessionSchema with no restart (#343 finding 2), and a custom CLI created
through the API renders a real local, remote and docker launch command
(#347 finding 5: no more `cd <path> && undefined`).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GuHtuPiHXdykq9T6rKQJ9n
---------
Co-authored-by: Claude Sonnet 5 <noreply@anthropic.com>
The two reviews on the PR (DeepSeek Harness, then Claude) found one class of
bug twice and a list of smaller ones; all of them land here, each pinned in
test/install-sh-invariants.test.ts and, where it is bash logic, driven in the
bash:3.2 CI step as well.
The Start line the done screen prints is now composed in one place
(start_command_hint) from every non-default value, the same five the exec
branch exports through export_bind_env, so "do not start" under a sub-path or
a custom port no longer prints a bare `codeman web`. The --lan / --tailscale /
env preset paths read ${CODEMAN_PASSWORD:-$EXISTING_PASSWORD}: a flag re-run on
a unit that carried a password used to rewrite it without the password and
with the unauthenticated ack. --password and --port flip RECONFIGURE so they
reach the unit instead of taking the quiet update path, and `install.sh name`
re-syncs the unit's base URL after the mapping is re-added.
Also: the sudo keepalive is ended before the exec into the foreground server
(exec skips the EXIT trap, and the loop keys on $$); Ctrl+C in the HTTPS-toggle
poll is trapped for the poll only and skips Tailscale for the run instead of
killing the installer; uninstall asks before removing a LaunchDaemon this
installer never wrote; a foreign daemon gets a launchctl kickstart hint and the
done screen stops claiming the new build is running; the preflight summary
reads the Tailscale state with a line grep when node is not installed yet; the
LAN security notice uses the configured port; a bare re-run ends on the done
screen; a build failure after a rename names the install.sh tailscale
recovery; TS_JOINED_HERE (written, never read) is gone; the plan doc and
architecture-invariants say what the code does. A minor changeset is included.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
The installer used to ask about ten things, half of them after a multi-minute
build, and the question that matters most (how do I reach the dashboard) came
last. It now looks at what is on the machine, asks at most three questions
(access, an optional tailnet name, service), and does the rest unattended.
- Every step that needs a human runs before the build: one consent for all
missing packages, one sudo prompt kept warm for the run, the AI CLI menu,
and the Tailscale install/login/operator/HTTPS-toggle preflight (the toggle
is polled and the admin page opened in a browser, instead of "re-check
now?").
- The build, the service and `tailscale serve` run behind spinners with their
output in ~/.codeman/install.log; the tail is shown on failure and a failed
dependency install names its step.
- The done screen leads with the URL (tailnet, network, this machine) and a
terminal QR code from the qrcode package Codeman already ships.
`install.sh status` prints it again.
- Tailscale is two halves: tailscale_prepare (question phase) decides the
serve SHAPE, tailscale_apply (after the build) issues the one serve command.
When :443 already belongs to another app, Codeman goes under a sub-path
(serve --set-path /codeman + CODEMAN_BASE_URL in the unit; serve strips the
prefix, Codeman's ingress tolerates that, --base-url covers the URLs it
emits) or a second port, instead of replace-or-nothing.
- Renaming the node to codeman-<hostname> is opt-in and defaults to no
everywhere (the tailnet name is the machine's ssh identity); --name and
`install.sh name` do it, uninstall offers the old name back. Serve config is
keyed by the DNS name, so a rename takes our mapping down first and re-adds
it under the new name.
- Flags pipe through `bash -s --`: --tailscale|--lan|--local, --name|--no-rename,
--service|--run|--no-start, --yes, --password, --port. --port is now also
written into the service file.
- npm install runs with CODEMAN_NO_AUTOSTART=1: postinstall otherwise builds
and starts a detached `codeman web` on 127.0.0.1:3000, which made the
service crash-loop on EADDRINUSE while the done screen reported "running"
off the orphan (fresh Ubuntu 24 sandbox).
- The LAN address comes from the default route, not the first interface.
- A foreign /Library/LaunchDaemons/com.codeman.web.plist is left alone
instead of being replaced by a LaunchAgent.
- The cloudflared question leaves the main flow (`install.sh cloudflared`).
- "Continue WITHOUT a password?" defaults to yes (owner decision).
Tests: the invariants test pins no `serve reset`, no funnel, no Tailscale
Service, every serve mutation through ts_cmd_serve, rename before shape,
flag/header parity, the rename default and the NO_AUTOSTART opt-out; the CI
bash 3.2 step drives the question phase with stubbed tailscale state.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
The caveat #429 added ends with "see the docs above", and "the docs
above" is CLI_DOCS[$i], which for DeepSeek is the upstream harness repo.
Per docs/deepseek-integration.md the harness ships only the web,
headless and base profiles, so following that link and running
`npm install -g @deepseek-ai/dsh` leaves the reader exactly where the
caveat is warning them about: a dsh that cannot drive a pane. What
actually resolves it is Codeman's own Run dropdown, which offers
"DeepSeek: add a terminal profile..." and installs one in a click.
The new wording stays generic for any future launcherProfile entry,
since Codeman is the thing being installed at all three call sites.
Also flips one word in the generator: the comment said "see
installCommandFor below" and that function is defined above it.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Addresses the "left as they are"/"worth knowing" items Ark0N named when
merging #380 (the CLI-catalogue-driven install.sh + Docker agent image
PR), none of which were correctness-blocking but all of which were real:
- Removed install.sh's dead _cli_index/check_cli/get_cli_path helpers:
the catalogue-driven menu and hints stopped calling them and nothing
else ever did.
- The generator no longer emits CLI_KIND/CLI_NPM, two bash arrays
install.sh never read (the .mjs/docker-hosts.ts producers already
read the JSON catalogue's kind/npmPackage fields directly, so only
the bash copies were dead).
- detect_all_clis now skips a disabled entry's probe entirely instead
of running it and filtering the result downstream. No stock entry
ships disabled today, so this closes a latent inefficiency before it
is a latent bug rather than fixing an observed one.
- The install hint for a launcherProfile entry (DeepSeek today) now
explains in one line why it's a docs link and not a command: its own
docs page documents `npm install -g @deepseek-ai/dsh`, which installs
the launcher only and can't drive a pane, the exact trap the menu
already avoids by withholding the command. Driven by a new generated
CLI_LAUNCHER_ONLY array (from discovery.launcherProfile), not an id
check, so any future launcherProfile entry gets the same caveat free.
- Corrected the non-interactive-default comment: on a wget-only host,
Claude's curl one-liner is filtered out of the offered list first, so
the default becomes whichever npm-based entry sorts earliest instead
(Codex today), not always Claude. Behaviour is unchanged — it was
already printed, never silent — only the comment overclaimed.
Tests: extended test/install-sh-invariants.test.ts with a positive
guard for the new array and the trimmed array list, a negative guard
that CLI_KIND/CLI_NPM/the three dead helpers cannot come back, and two
real-bash tests (driven the same way the existing skip-menu tests are)
proving a disabled entry is genuinely never probed rather than merely
filtered after the fact.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_011WzDjJnbK7zug8iQWnCc9z
Three instructions a future contributor would follow literally were stale after
the last review round: the "Adding a CLI" checklist sent the agent-image reason to
AGENT_IMAGE_SPECIAL_CASES, a constant that no longer exists (it is
discovery.install.agentImageLayer on the entry in stock.ts), the trust-boundary
paragraph credited the embedded-commands pin to the invariants test when it is
test/cli-catalog-sync.test.ts, and install.sh claimed "the parity test" pinned the
DeepSeek Harness banner when no test did. That pin now exists: the invariants test
asserts the script's grep literal and the registry's discovery.identity.regex agree
on "DeepSeek Harness", and the comment names it.
docs/docker-cases.md separated the two reasons a CLI stays out of the shared npm
layer (no npmPackage at all versus an agentImageLayer entry), which it had folded
into one, and architecture-invariants no longer lists the agent image's CLI set by
hand.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Choosing "s" (Skip) in the new catalogue-driven install menu warned, printed the
install hints and then fell into the shared "The selected AI CLI failed to install"
gate one line below, because CLI_FOUND_COUNT is 0 by construction inside that block
and skipping does not change it. The AI CLI check runs before the clone and the
build, so a user who picked the documented skip option ended up with nothing
installed. The code this replaced guarded the gate with an elif on the skip choice.
The menu moves out of main() into offer_ai_cli_install() and the gate moves inside
the install branch: skipping continues to the clone, a chosen install that leaves
nothing behind is still fatal. Being a function, the interactive path can now be
driven with a stubbed read_reply, which is what nothing reached before: two
behavioural tests in test/install-sh-invariants.test.ts run the real function in a
real bash (skip continues with exit 0, a failed install dies with exit 1), and the
bash 3.2 CI step drives the skip path in the container as well.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Rebased onto current master (the one real conflict was the import line
in docker-hosts.ts Ark0N flagged; kept both), then addressed every
point from the review:
**1. Rebase.** Done — this branch now sits on current upstream/master.
**2. Agent-image special cases are data now, not an id-keyed table
outside stock.ts.** `AGENT_IMAGE_SPECIAL_CASE_IDS`/`AGENT_IMAGE_SPECIAL_CASES`
are gone. `CliDiscovery.install.agentImageLayer?: { kind: 'dedicated';
reason: string }` is a field on the registry entry itself (pi,
deepseek), `reason` is required by schema.ts, both producers
(docker-hosts.ts and cli-catalog.mjs) filter on its presence instead
of an id, and the coverage test reads it from the generated catalogue.
Also added the npm-package-name validation to the TS producer, which
only the .mjs one had — same SAFE_PACKAGE regex, duplicated
(necessarily, one side can't import the other) and now pinned
byte-identical by a new parity test.
**3. Changeset said five, it's eight.** (Not nine — see the DeepSeek
point below, which changes the true count.) Reworded to state it
structurally rather than pin a number that will go stale again.
Then the four behavior-changing findings:
- **DeepSeek was offered as a normal install option but can't actually
drive a pane.** `npm install -g @deepseek-ai/dsh` installs the
launcher only; DeepSeek ships no profile that can run standalone.
The generator now emits an empty install command for any
`launcherProfile` entry, so install.sh's menu (which requires a
non-empty command) skips it and falls through to its docs URL hint
instead — matching what the old hand-written code did before this
PR replaced it.
- **wget-only hosts lost every automatic install, including the npm
ones that never needed curl.** The menu-building loop now filters
PER ENTRY (only a command starting with `curl ` is held back) rather
than wiping the whole menu when DOWNLOADER != curl.
- **The DISPLAY/TRUSTED split and the catalogue refresh didn't hold up
under review** (refresh's only real write was the label; it ran
before the Node existence check; its own eval-detection test was
tripped by the word "eval'd" in a comment). Dropped entirely per
your own recommendation — embedded catalogue only, no network
fetch, no second array. install-sh-invariants.test.ts now asserts
the refresh/DISPLAY machinery does not exist rather than testing its
internals.
The three take-or-leave items, applied:
- `dsh_banner_probe`'s bash 3.2 empty-array bug: `${runner[@]}` →
`${runner[@]+"${runner[@]}"}`. Verified live in a real `bash:3.2.57`
container with `timeout` removed from PATH — crashed before, clean
now, full `detect_all_clis` path exercised end to end.
- `docker-agent-image-coverage.test.ts` now anchors on each layer's
`<binary> --version` proof line instead of `Dockerfile.includes(binary)`,
which stayed true if a layer were deleted but its comment survived.
- Doc drift: docs/docker-cases.md (four → five, and now describes the
data field), docker/agent.Dockerfile's "other four CLIs" comment (no
longer a magic number — CLI_NPM_PACKAGES is generated and can grow),
CLAUDE.md's install.sh size (104KB → ~112KB) and its stale mention of
the now-dropped refresh.
Verified: tsc clean, prettier clean, the full targeted suite (142
tests across the 8 affected files) green, and the full `npm test` gate
diffed BY TEST NAME against a clean upstream/master baseline run on
this same machine — identical 201-name failure set both sides (168
tests / 67 files, all pre-existing Windows-environment noise: symlinks,
PTY spawning, POSIX permission bits — none of it touching anything
this PR changes), zero new failures either side of the diff.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01R9ZSTEenc8soSu9bTi8Xru
install.sh carried nine search-path arrays, eighteen near-identical
check_<cli>/get_<cli>_path functions, and three separately hand-maintained
enumerations of all nine CLIs. They had to agree and did not: upstream b6d0f1fa
is "wire OMP into install.sh's CLI detection (it had none)", and the section
comment above the roll-call named six of the nine.
All of it now reads the generated catalogue. `detect_all_clis` resolves every
CLI in one memoized pass into CLI_FOUND_PATH/CLI_FOUND_COUNT; `check_cli` and
`get_cli_path` replace the eighteen pairs; the roll-call, the "no AI CLI found"
gate and the closing reminder become loops. Probe order per CLI is unchanged and
`test/install-sh-detection-parity.test.ts` proves it against the literals
transcribed from the arrays this deletes.
Behaviour changes worth naming:
- The install menu is built from the catalogue, so it offers every enabled CLI
that is not installed and ships a command — five instead of two. Gemini had a
command in the registry and appeared in NO list in this script.
- Its labels are now the registry's ("Claude" rather than "Claude Code"), the
same trade PR A made for `codeman doctor` rows. A suffix map would just be the
hand-maintained list again.
- On a wget-only host the menu prints commands instead of running them. The
registry's commands call curl, whereas the two literals this replaces went
through download_to_stdout; rewriting curl to wget inside a string we are
about to execute is the wrong instinct.
The trust boundary is mechanical, not a promise: CLI_INSTALL_CMD_TRUSTED is
written only from the generated per-platform arrays and is the only thing ever
executed; CLI_INSTALL_CMD_DISPLAY is what the optional, opt-in refresh may
rewrite. The refresh warns on all three failure shapes — empty body, unparseable
content, failed fetch — which is the silent-degradation bug from the review, and
it parses with node into tab-separated records read by `read`, never eval.
Bash 3.2 throughout (macOS ships it): parallel indexed arrays, offset/length
windows instead of delimiters, no associative arrays, namerefs, mapfile or
here-strings. Verified by executing the script under a real bash 3.2 container,
which is also now a CI step alongside `bash -n` and a catalogue `--check` — the
empty-window case (`shell` has no binaries) is a runtime `set -u` abort that
`bash -n` cannot see. Running it that way caught `detect_os` being called inside
the platform loop: ten forks, and ten copies of one error, since a `die` inside
`$( )` can only exit the subshell.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_015EMxQreQUZX5ZyybxAGh12
Two consumers of the registry cannot import TypeScript: `install.sh`, which runs
via `curl | bash` before any checkout exists, and `scripts/build-agent-image.mjs`.
Both currently hand-maintain their own CLI lists, and both have already drifted.
`scripts/generate-cli-catalog.mts` (`npm run generate:cli-catalog`, plus a
`--check` mode) emits from `STOCK_CLIS`:
- `config/clis.stock.json` for the `.mjs` and the tests. It carries `enabled` —
the field the earlier attempt omitted, which is how a disabled CLI's npm
package still got baked into every agent image.
- a marker-delimited block inside `install.sh`, embedded rather than fetched.
The embedded copy is the FULL catalogue on purpose: the earlier design fetched
it and fell back to a hardcoded two-CLI list, degrading silently on an empty
response. There is no degraded mode to fall into now.
The block is bash 3.2 safe: parallel indexed arrays, no associative arrays, no
namerefs, no mapfile. Variable-length lists use OFFSET/LENGTH windows into one
flat array rather than a delimiter, so a $HOME containing a space needs no IFS
handling and `shell` (no binaries) gets length 0 and is never iterated. Search
paths are emitted dir-major, matching the probe order the hand-written arrays
use and `test/install-sh-detection-parity.test.ts` pins.
Only fields the two consumers need are exported. `launch`/`env`/`capabilities`/
`overlays` are spawn-time concerns the server alone interprets, and a test
asserts they never leak into the artifact.
`main()` sits behind an `isMainModule()` guard so the sync test can import the
renderers. Without it, importing the module would rewrite the artifacts as a
side effect of checking them — passing always, guarding never.
This commit adds the block; it does not yet delete the hand-written arrays, so
the detection pin keeps measuring both against each other.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_015EMxQreQUZX5ZyybxAGh12
Every other CLI (claude/opencode/codex/gemini/antigravity/pi/grok/dsh) has
a check_*/get_*_path pair wired into install.sh's detection loop and the
"no AI CLI found" aggregate checks. OMP had neither -- a user with only
omp installed would be told no CLI was found and offered to install
Claude Code or OpenCode.
Added OMP_SEARCH_PATHS (mirrors src/utils/omp-cli-resolver.ts's
OMP_SEARCH_DIRS) and check_omp()/get_omp_path(), wired into both
aggregate conditions (the interactive install-menu trigger and the
end-of-run reminder) and added omp's real vendor curl one-liner to the
reminder block. The DeepSeek Harness line was never in that reminder to
begin with -- confirmed it has no vendor one-liner (dsh installs via
Codeman's own API after the server is already up), so it stays out, with
an explanatory line instead.
Also fixed the "Skip" menu text, which was missing Gemini and DeepSeek
Harness from its example list independent of the omp gap, and the same
stale sibling-CLI-list bug (missing DeepSeek Harness and OMP, "the
eight"/"这七个") in README.md and the repo's existing README.zh-CN.md.
The network-access prompt, where Tailscale serve is configured, runs AFTER
the build step. A build failure therefore exits before the question is ever
asked, and a user who then finishes the build by hand (rather than re-running
install.sh) ends up with a healthy loopback-only Codeman, a connected
Tailscale, and no serve mapping — with nothing anywhere pointing at
`install.sh tailscale`, the command that fixes it. Reported from a fresh
Ubuntu 24 install that died on the node-pty compile.
- maybe_offer_tailscale_repair(): on the update/re-run path, detect exactly
that state (loopback bind + tailscale Running + no serve mapping fronting
Codeman) and offer the retrofit. Silent for a deliberate non-loopback bind,
silent once a mapping exists, silent when tailscale is absent, and prints
the command instead of prompting when non-interactive. Returns 0 even when
setup fails so it can never abort an update.
- print_security_notice(): the loopback branch now names
`install.sh tailscale` when Tailscale is installed on the box, rather than
the generic "tailscale serve / cloudflared tunnel" advice.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
install.sh installs a build toolchain on Linux (node-pty has no Linux
prebuild, so a stock Ubuntu 24 server died inside node-gyp with
"not found: make"), plus review hardening for #339: the write-queue
reset paths now release the one-chunk-in-flight gate.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Fifteen review findings on the dsh mode, the serious ones first:
- Multi-user: DEEPSEEK_BASE_URL joins the owner-clamped env keys.
_configureDeepSeek() forwards the SERVER's own DEEPSEEK_API_KEY into
every dsh pane and applyEnvOverrides() lands after it, so a non-granted
owner who could redirect the base URL would have the operator's key sent
as a bearer credential to a host of their choosing.
- Wait registry: until=stop/blocked is refused on docker and remote-SSH
dsh sessions (new deepSeekBridgeUnreachable fact in sessionHookOptions).
The HERDR triple is set via LOCAL tmux setenv, which crosses neither
docker exec nor ssh, so such a session can never post a hook event and
the wait burned its whole timeout on every turn.
- Approvals: a dsh item is an ALERT, not an answerable card. The answer
route refuses (the '1'/Esc keystrokes are Claude-dialog-shaped and the
option parser cannot read a third-party TUI's frames, so an answer was a
blind keystroke into a foreign composer), and the push notification
carries no Approve/Deny actions for dsh sessions.
- Status shim (v3): --seq is forwarded and the server drops stale retried
reports inside a 60s window (the TUI retries with backoff, so a retried
'working' could land after 'blocked' and resolve an approval whose
dialog was still on screen); 4xx responses exit 0 instead of retrying,
so one misconfigured session cannot feed the auth rate-limit bucket
until the hook endpoint 429s for the whole instance.
- Web-UI server: concurrent starts are serialized through a lock (two
racing POSTs used to pick the same port and orphan the winner), and the
readiness poll / timeout paths only clear or stop the singleton while it
is still theirs. First click actually opens the tab now
(refreshWebviews, not the nonexistent loadWebviews). DELETE
/api/deepseek/web requires the privileged grant in multi-user mode.
- Cron: deepseek jobs run the same two-part launch gate as the HTTP
create paths (impl moved into the resolver so all three share it) and no
longer stamp a Claude default model on the session.
- Parity sweeps: quick-start's docker branch rejects deepSeekConfig like
the remote branch; the Ralph auto-enable list gained deepseek;
HookEventType gained agent_working; the phone overview run menu filters
managed webview records like the desktop menu.
- install.sh: the dsh identity probe closes stdin (under curl|bash a
child that reads stdin eats the rest of the script), bounds the exec
with timeout where available, and is memoized to one scan per install.
- Welcome screen: .welcome-btn-deepseek styled in the #4d6bfe brand
identity (it rendered as an unstyled UA-grey button); stale markup
comment about the web shortcut rewritten; clamp docs updated.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Adds `mode: 'deepseek'` alongside claude/shell/opencode/codex/gemini/
antigravity/pi/grok, plus a shortcut that opens the harness's own browser UI
as a Codeman web tab.
DeepSeek is wired unlike its siblings in three ways, each of which is the
reason for a design decision rather than an accident:
1. The agent is a PROFILE, not the binary. `dsh` is a launcher over
$DSH_HOME/profiles/<name>, and DeepSeek ships only `web`, `headless` and
`base` -- the interactive terminal front door is always a third-party
plugin. So availability is two questions: `isDeepSeekAvailable()` (binary)
and `isDeepSeekRunnable()` (binary AND a pane-capable profile). The Run
button gates on the latter, because reporting only the binary would spawn a
pane that dies on arrival. When the binary is present but no profile is,
the run menu offers to install one (POST /api/deepseek/install-profile).
2. The permission switch is an env var, not a flag. The harness has no
command-line permission option; its sandbox/approval rows read
DSH_PERMISSION_MODE (read-only / workspace-write / danger-full-access).
Exported via `tmux setenv`, never on the spawn line. Absent = the harness's
own workspace-write, which still asks, so the multi-user clamp is the
only-if-sent branch and clamps to workspace-write, never read-only.
3. It is the only non-claude mode that passes hooksAvailableForMode(), and it
earned that. The terminal front door reports idle/working/blocked to a
supervising process over a generic env-gated contract; a generated shim
(deepseek-status-shim.ts) makes Codeman that supervisor and forwards each
report to /api/hook-event as stop / agent_working / permission_prompt. So a
dsh session gets definitive respawn triggers, real wait-endpoint signals and
real Approvals Inbox items instead of output-stabilization guesswork.
`agent_working` is new (157th SSE constant) and joins
APPROVAL_RESOLVING_EVENTS so a dialog answered in the terminal clears its
alert at once.
The resolver needs the strictest identity probe of the family: `dsh` is not
merely a squattable npm name, Debian ships an unrelated `dsh` (dancer's shell),
so `dsh --help` must print the harness's own banner before a candidate is
handed a spawn line.
Model is deliberately not a session field -- it is a composition entry in the
profile's config tree. Env allowlist gains DSH_* and DEEPSEEK_* only; provider
keys named by a settings-file `apiKeyEnv` stay out, which is pi's
34-provider-key problem in a new shape.
Verified live against dsh 0.1.1-rc.2 and @deepseek-harness-tui/dsh-tui: the
status endpoint's two-part answer, the no-profile refusal, the profile
bootstrap, a real session whose pane runs `dsh --profile dsh-tui` with the
permission mode injected via setenv, and the full status bridge -- a
send-and-wait returned signal "stop" from a real turn, and blocked/working
created and cleared an Approvals Inbox item.
Docs: docs/deepseek-integration.md (guide), docs/deepseek-integration-plan.md
(decisions + honest gaps). Tests: test/deepseek-mode.test.ts,
test/deepseek-cli-resolver.test.ts.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
SessionMode gains 'grok', a first-class backend alongside Claude Code,
shell, OpenCode, Codex, Gemini, Antigravity and Pi: its own PTY, tmux
session, charcoal tab identity ('gk' badge), welcome button, run-mode
entry, cron agentType, Docker and remote-SSH command defaults, and
clone-repo Brain option. Flag surface verified live against grok 1.0.5.
Grok mixes two existing shapes and the wiring follows from that:
- Codex-shaped on permissions: the bypass switch is GrokConfig.alwaysApprove
(--always-approve, grok's bypassPermissions mode; config-level deny rules
still apply on top). The Run button sends it true, like runAntigravity(),
and clampExternalCliBypassForOwner() puts grok in the only-if-sent branch:
a bare grok spawn is grok's own ask-mode default, which is already safe,
so only a sent config needs the flag forced off. Cron needs nothing for
the same reason.
- OpenCode-shaped on rendering: grok is a fullscreen alternate-screen TUI
with mouse support, so it stays OUT of isAltScreenStripMode() and lands
on the narrow tmux-attach strip and the 'buffer' local-echo fallthrough
(unmeasured against an authenticated composer; documented fallback is the
'off' branch).
- Pi-shaped on resolution: 'grok' has npm squatters (@vibe-kit/grok-cli
also installs a grok bin), so grok-cli-resolver.ts version-probes every
candidate (grok --version, killSignal SIGKILL, VITEST-gated) and
GET /api/grok/status surfaces path AND version; GROK_VERSION_REGEX is
shared with the dependency registry so doctor and run mode cannot drift.
Env allowlist gains GROK_* plus the XAI_* vendor namespace (XAI_API_KEY is
grok's documented headless auth var), the same narrow-vendor reasoning as
GOOGLE_* for gemini. Resume is id-regexed on purpose: grok's own --resume
also matches session titles, which are arbitrary user strings that must
never reach the bash -c spawn line.
Docker: grok is not on npm, so the agent image installs it in its own step
(xAI's installer has no --dir override; the binary is copied to
/usr/local/bin and root's ~/.grok dropped in the same layer), and
credentials are seeded per-file (auth.json, config.toml, pager.toml; the
dir also holds sessions/, memory/ and the ~160MB binary). Remote SSH routes
through the login-shell wrapper like the other agent CLIs.
Verified end to end on an isolated CODEMAN_INSTANCE with grok 1.0.5
installed: /api/grok/status resolves and reports the probed version,
quick-start spawns a pane whose command line ends in 'grok
--always-approve', the real TUI renders (OAuth device screen on an
unauthenticated box), and grokConfig round-trips through state.json.
Docs: docs/grok-integration.md (user guide) + docs/grok-integration-plan.md
(decisions, verification record, follow-ups).
Tests: test/grok-mode.test.ts, test/grok-cli-resolver.test.ts, plus
extended clamp/system-routes/render-index-html/run-mode-ui/mobile-overview/
local-echo-gating coverage. npm test (the CI gate) green: 5910 tests.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
scripts/tmux-chooser.sh is deleted. codeman tui replaces it and does the
job better: sc numbered its entries globally but only accepted a single
[1-9] keypress, so sessions 10+ were listed and unselectable, and it
inferred nothing about what an agent was doing. The tui carries the
server's real states, answers permission dialogs, and leaves an attach
with one key.
install.sh no longer creates the tmux-chooser symlink or the sc alias.
It now sweeps both up instead, on update AND uninstall, so an update
cannot leave a symlink pointing at a script this version stopped
shipping. The alias removal is marker-owned: it matches the exact line
the installer wrote, so someone's own 'alias sc=' for another tool is
never touched, and it rewrites through 'cat >' so the profile keeps its
mode and ownership. Verified against three profile shapes.
BREAKING CHANGE: the 'sc' command and the 'tmux-chooser' symlink are
gone. Use 'codeman tui' (and 'codeman tui --list' / 'codeman tui <n>').
codeman tui supersedes the sc bash chooser: it reaches sessions 10+,
carries the server's real states instead of a static list, and leaves an
attach with one key. Every place that told a user to run sc now names the
tui equivalent, including the two wiki pages and install.sh's next-steps
banner. Both wiki pages also carried the wrong detach chord (Ctrl+A D;
the socket's prefix is C-b), which the tui makes moot.
Source comments that explained themselves as "the sc -l replacement" now
just say what they do. docs/tui-plan.md and CHANGELOG.md are historical
records and keep their references.
SessionMode gains 'pi', a first-class backend alongside Claude Code,
OpenCode, Codex, Gemini and Antigravity: its own PTY, tmux session, rose
tab identity, welcome button, run-mode entry, cron agentType, Docker and
remote-SSH command defaults, and clone-repo Brain option.
Pi is a different shape of CLI from the other four, and three decisions
follow from that:
- It has NO permission prompts and no sandbox, so there is no
--dangerously-skip-permissions analog and none was invented. The
privilege-shaped knob is the tri-state approveProjectTrust, which makes
pi load and EXECUTE repo-local .pi/extensions TypeScript and install
missing project packages. clampExternalCliBypassForOwner() therefore
puts pi in the MATERIALIZE branch: a non-granted multi-user owner gets
--no-approve even when no config was sent, because pi's own default is
a prompt the session user could answer themselves. That helper had zero
test coverage; it now has coverage for all four CLIs.
- Only the PI_ prefix joins the env allowlist. Pi's ~34 provider key vars
share no prefix and ALLOWED_ENV_PREFIXES is one global list with no mode
context, so admitting them would widen the allowlist for every mode at
once. Auth goes through pi's /login or the server's own environment.
--api-key is deliberately never wired: it would put a provider secret on
the spawn command line.
- pi stays OUT of isAltScreenStripMode(). Its default TUI renders into the
main screen with terminal-owned scrollback, and its 0.84.0 fullscreen
mode is runtime-switchable via /settings; that flip was measured to put
the pane into the alt screen, which the strip would have corrupted.
pi-cli-resolver.ts additionally sanity-probes `pi --version` and requires
semver-shaped output, because `pi` is a short generic name a stray binary
can shadow; GET /api/pi/status surfaces path and version so a
misresolution is diagnosable rather than presenting as a broken mode.
Docker installs pi in its own --ignore-scripts step so that flag cannot
affect the other four CLIs, and seeds its credentials per-file rather than
whole-dir (~/.pi/agent also holds sessions, extensions and package trees).
Verified end to end against pi 0.84.1 on an isolated instance: resolver
search-dir fallback, flag construction, piConfig persistence across a full
server restart, the trust prompt and its --no-approve suppression, the
rose Run button on the default daylight-blue skin (the nested skin block
eats per-mode gradients unless the rule lives inside it), and the buffer
local-echo policy, which pi tolerates where codex did not.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Antigravity (agy) was wired into the session layer but never propagated to
the surfaces around it, while Gemini CLI stayed documented as a consumer
product despite being enterprise-only since Google's cutover. Gemini keeps
full support; Antigravity now sits beside it everywhere.
Functional fixes:
- docker/agent.Dockerfile never installed agy, so a docker case with
mode 'antigravity' died on command-not-found. agy is not on npm, so it
gets its own installer step. --dir /usr/local/bin is load-bearing: the
default $HOME/.local/bin resolves to root's home at build time and is
unreachable by the `agent` user the container runs as. Verified inside
codeman/agent:base (v1.1.10, reachable as `agent`). Note the binary is
~190MB, the largest layer in the image.
- Welcome screen gained a Run Antigravity action, gated on agy being
present like the other CLI buttons, with a cyan identity matching the
toolbar run button and run-mode dot.
- install.sh now detects agy (search paths mirroring the resolver), counts
it as a satisfying AI CLI, and recommends it over Gemini in the install
hints. Detection only, no new auto-install path.
Docs corrected where they were factually wrong:
- architecture-invariants documented isExternalCliMode() as
opencode/codex/gemini when the code has included antigravity for a
while, said "all three modes", and omitted ANTIGRAVITY_ from the env
prefix allowlist row.
- cron-guide's agentType enum, cron-discovery's SessionMode, and
remote-sessions' RemoteCommandMode were all stale.
Also: README + README.zh-CN (five CLIs, Gemini marked enterprise-only),
package.json keyword, and comment drift in 8 places.
test/run-mode-ui.test.ts now covers the new welcome button; verified it
fails without the settings-ui wiring.
Antigravity nests its whole state under ~/.gemini/antigravity-cli/, not
~/.antigravity, so the existing .gemini docker credential seed already
covers it. Recorded as a comment so nobody adds dead config later.
isAltScreenStripMode() deliberately still excludes antigravity: whether
its TUI needs the alt-screen strip is a behavioural question that needs a
real agy session, not a guess.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Release 1.9.8 (aicodeman) and 0.1.8 (xterm-zerolag-input).
Fixes macOS session start (`posix_spawnp failed.`, issues #6 and #204):
node-pty ships its macOS spawn-helper as mode 0644 and macOS launches every
PTY through it. `scripts/fix-node-pty.mjs` (npm run fix:node-pty) chmods every
helper, prebuilds/ included, then verifies by really opening a PTY; the blind
Node-22+ rebuild is gone. `spawnPtyWithHelperRepair()` self-heals an already
broken install on the first failed spawn.
Adds the phone home screen (session overview under 430px, per-device
`mobileOverviewEnabled`, default ON) and a guided Tailscale path in
install.sh, plus `install.sh tailscale` to retrofit it.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Updating must never silently loosen security. The update path already never
rewrites service files; this covers the remaining gap, re-running the full
installer over an existing setup:
- read_existing_binding() parses the current systemd unit or launchd plist
(a pre-1.8 service without our env lines counts as loopback).
- The network-access prompt defaults to the CURRENT setup instead of the
network default, shows what that setup is, and Enter keeps it, including
a custom non-loopback host and the existing password.
- Non-interactive re-installs adopt the existing binding wholesale.
- The update path's closing security notice now reflects the service's
actual binding instead of the generic loopback text.
Round-trip escaping tested for both formats (quotes, backslashes, XML
specials) plus the legacy-unit, preserve, and Enter-keeps flows.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The loopback-only default was safe but left most installs unreachable from
the devices people actually use. The installer now asks at the end of setup:
1) Any device on your network (0.0.0.0), the default. Prompts for a
dashboard password (confirmed twice); skipping it requires an explicit
confirmation and prints a big red warning as the final output.
2) This machine only (127.0.0.1), the safer option, for tunnel/Tailscale
setups.
The choice flows into the systemd unit, the launchd plist (values escaped
for both formats), the run-now exec path, and the printed URLs (LAN IP
detection included). Non-interactive installs keep the safe loopback
default unless CODEMAN_HOST is preset; the server binary's own default
binding is unchanged.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
README.md + README.zh-CN.md:
- New "Remote SSH Sessions" section (durable remote tmux, auto-reconnect,
discover/attach with detach-not-kill, shared sessions, injection-safe ssh)
- New "Session Manager & Command Palette" subsection (pinning survives kill,
name retention on resume, cross-device tab order sync)
- Multi-user quick start right after installation (users add + --multiuser),
and the zh-CN README gains the full Multi-User Mode section it was missing
- Security: document the configurable startup permission mode (skip/auto/
normal/allowedTools) and the multi-user auto downgrade
- Cron header button noted as opt-in (Header Displays); API section counts
refreshed (~190 handlers / 20 route modules) with pin, session-order and
unified endpoints; Development now recommends npm run test:ci
CLAUDE.md (/init audit): session-order.ts in the Session row, PR #157
session-manager polish appended to the unified-list pattern, opt-in Cron
button documented, route/SSE counts refreshed (20 modules, ~188 handlers,
~146 events)
install.sh: the post-install "How would you like to run Codeman?" menu (and
the CLI picker + yes/no prompts) read from stdin, which under curl | bash is
the pipe, so choices were impossible and the script silently fell through to
the default. New has_tty()/read_reply() helpers prompt via /dev/tty whenever
a real terminal exists (same approach the sudo path already used) and only
fall back to defaults when there is genuinely none, now with an info line
saying so. Verified both paths with a pty harness (script(1)) and setsid.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
install.sh now prints the loopback-bind security notice as the final block of
both the one-line fresh install and the update flow, so it stays visible. Also
documents that gesture control remains opt-in / default-off (changeset).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Three fixes for macOS deployments:
1. HTML cache bug: @fastify/static with preCompressed serves .html.br/.html.gz
files, so path.endsWith('.html') missed them — HTML got 1-year immutable
cache headers instead of no-cache, causing stale pages after deploys.
2. Installer launchd support: macOS now gets proper LaunchAgent setup (like
systemd on Linux). Removes competing LaunchDaemons to prevent duplicate
services fighting over the port. Update/uninstall also handle launchd.
3. Trust dialog auto-accept: Claude CLI 2.x shows a workspace trust prompt
on first launch per directory. Sessions detect "trust this folder" in PTY
output and auto-send Enter, preventing sessions from hanging on startup.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
When running `curl | bash`, stdin is the pipe, not the terminal.
Homebrew and sudo need TTY access to prompt for the password.
Redirect /dev/tty as stdin for these subprocesses.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
WebSocket route: add socket error handler to prevent process crashes, enforce
per-session connection limit (max 5), track/decrement counts on close.
CJK input: add destroy() method with proper listener cleanup, guard against
double-init, add maxlength/aria-label to textarea, use language-neutral
placeholder, explicitly clear cjkActive on hide.
install.sh: fix update() to use $BRANCH and $REPO_URL instead of hardcoded
origin/master — fork users were silently switched back to master on update.
README: fix broken markdown table (paragraph concatenated into last cell),
add CODEMAN_NODE_VERSION to env var table.
Tests: add 8 new test cases for batch coalescing, flush threshold, unknown
message types, connection limit, heartbeat, readyState guards. Import
MAX_INPUT_LENGTH from config, add connectWs timeout, replace setTimeout
with vi.waitFor in cleanup test.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
The update path was hardcoded to origin/master. Now uses the
CODEMAN_BRANCH variable and updates the remote URL on upgrade.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Add CODEMAN_REPO_URL and CODEMAN_BRANCH env vars to install.sh
for installing from forks or feature branches. Update README with
fork installation instructions and env var reference table.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Re-running the install script now detects ~/.codeman/app/.git and
automatically updates instead of re-installing. Removes the separate
`bash -s update` instructions from README since it's no longer needed.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* refactor: extract SSE event handlers into named class methods
Replace ~80 inline addListener closures in connectSSE() with a
declarative _SSE_HANDLER_MAP array that drives registration in a
single loop. Each handler is now a named _on* method on CodemanApp,
making them individually addressable for LLM navigation.
Add SSE_EVENTS constant object in constants.js to eliminate magic
event-type strings scattered across the frontend.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* docs: fix inaccuracies in CLAUDE.md
- Fix types barrel path: src/types.ts → src/types/index.ts
- Update app.js line count: ~12K → ~11.5K
- Correct route handler counts (113 → 111, per-group fixes)
- Add code style, ESM gotcha, env vars, route test, lifecycle log docs
- Add Node 22 CI note, test teardown timeout, port range
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* docs: add mobile screenshots and QR auth security writeup to README
Add 3 mobile screenshots (landing, idle, active) and expand the
mobile section with QR auth security design details and a
touch-optimized interface subsection.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* feat: bundle xterm-zerolag-input as vendor IIFE and add pre-commit hook
Build and postinstall now bundle the local xterm-zerolag-input package
as an IIFE at vendor/xterm-zerolag-input.js with global LocalEchoOverlay
shim. Add git pre-commit hook that runs prettier --check on staged .ts
files to catch format issues before CI.
Also bump constants.js and app.js cache-bust versions to 0.3.0 and add
tunnel upload URL display row in settings.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* feat: add cloudflared install support and interactive launch menu
- Add optional cloudflared dependency detection and installation
across 6 distro families (macOS, Debian, Fedora, Arch, Alpine, SUSE)
- Add tunnel systemd service setup helper
- Replace post-install instructions with interactive launch menu
(run now / systemd service / skip)
- Uninstall now cleans up both codeman-web and codeman-tunnel services
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* chore: gitignore readme-preview.mjs
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* refactor: WIP — SSE event constants, @fileoverview docs, CLAUDE.md compression
- Migrate broadcast() string literals → SseEvent.* typed constants
- Add @fileoverview with cross-domain references to all 13 type domain files
- Add @fileoverview to frontend JS modules (constants, mobile, voice, etc.)
- Add section dividers to route files for LLM scanability
- Compress CLAUDE.md: flat file list → domain table, fix counts
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* refactor: optimize codebase for LLM context window efficiency
CLAUDE.md: 456 → 309 lines (32% reduction)
- Merge Commands into compact table, remove redundant bash block
- Convert Security section to dense table format
- Merge Performance + Resource Limits, Debugging + Troubleshooting
- Compress Tunnel, Memory Leak, Scripts, Screenshots sections
- Remove Key Patterns that duplicate @fileoverview in source files
Backend @fileoverview enhancements (10 priority files):
- session.ts: key methods, events, cross-domain refs
- respawn-controller.ts: state machine, idle detection layers
- ralph-tracker.ts: exports, circuit breaker, events
- ralph-loop.ts: lifecycle, persistence, events
- subagent-watcher.ts: watched patterns, teammate detection
- server.ts: coordination list, port interfaces
- state-store.ts: dual-file persistence, migration
- session-manager.ts: lifecycle methods, mutex guard
- hooks-config.ts: hook events list, categories
- sse-events.ts: category breakdown (~90 events, 17 categories)
Frontend app.js: add 6 section dividers, update @fileoverview line refs
Fix: escape glob `*/` in JSDoc that broke ESLint parser
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* fix: address PR #29 review bugs
- server.ts: replace hardcoded 'session:needsRefresh' with SseEvent constant
- install.sh: fix Alpine cloudflared install for non-root (download to tmpfile first)
- install.sh: replace Arch pacman (AUR-only) with direct binary download
- index.html: bump all 8 remaining cache-bust versions from v0.2.9 to v0.3.0
- mobile-handlers.js: fix @dependency annotation (keyboard-accessory.js, not constants.js)
- types/push.ts: fix layer number (4, not 5)
- subagent-watcher.ts: fix watched pattern path to include {session} segment
- constants.js: fix SSE_EVENTS count in @fileoverview (~73, not ~65)
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
- Extract ensure_homebrew() called from all macOS install functions (prevents crash if Git checked before Node)
- Add dnf/yum fallback in Fedora install functions (fixes Amazon Linux 2 which only has yum)
- Add ensure_sudo to Alpine install functions (consistent with all other distros)
- Update Fedora/SUSE NodeSource setup to use GPG keyring method (replaces deprecated setup_XX.x script)
- Remove dist/ directory from PATH (only use ~/.local/bin symlink)
- Collapse identical fish/non-fish branches in setup_sc_alias
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
feat: interactive teammate tmux pane windows with xterm.js terminals
feat: auto-cleanup teams/subagents/pane windows on session delete
fix: only show agent/teammate windows when matching Claudeman tab exists
fix: UTF-8 encoding in teammate pane terminal output (Uint8Array)
fix: standalone pane window cleanup via subagentParentMap lookup
fix: xterm.js dimensions crash with deferred init + null-safe dispose
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
