mirror of
https://github.com/Ark0N/Codeman.git
synced 2026-10-06 23:49:41 +02:00
233af33dac522ad6780e203957fe320d1bc2d7d4
1155
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 Ark0N
|
613b774bf1 |
Merge pull request #451
fix(terminal): trim the padding and shared indent out of a copied selection |
||
|
Ark0N
|
60c9af0599 |
Merge pull request #435
fix(terminal): replay a pane capture at the geometry it was taken at |
||
|
Michael GrundbergandClaude Opus 5
|
95dc6fe944 |
fix(terminal): remember a geometry replay that did not converge
`resizeRetry` caps the recursion inside one select and says nothing about the next one, so a pane this browser cannot size reported the same mismatch on every select and bought the same failed repair each time: two fetches per tab switch for the life of the page, measured as a running count of 2, 4, 6 across three selects. That is the case this branch describes as happening every time rather than occasionally, a phone whose resize `Session.resize` declines while a desktop claim is live, and it is not the only one — any pane Codeman cannot size lands there, including one a second tmux client is also holding. Each wasted pass costs another `capture-pane`, which is `execSync` and blocks the server's event loop, plus a reset and chunked rewrite, a discarded snapshot and cache entry, and a dropped and reopened WebSocket. `_geometryRetryUseless` mirrors the existing `_fullHistoryRepullUseless`: a retry pass whose frame still does not fit adds the session, geometry that fits removes it, and the replay gate consults it. The proof has to come from a retry pass rather than a first one, because the retry ran at the size that stuck and the pane ignored it. Clearing on a fitting frame is what stops a pane that becomes sizeable again, once the desktop tab closes or its claim goes idle, from staying permanently unrepaired. The race case never reaches the latch, since it converges on its first attempt. The new browser case walks all of that: three selects reading 2, 3, 4 instead of 2, 4, 6, then a fitting frame, then a mismatch diagnosed afresh. Without the gate it fails on the second switch with `expected 4 to be 3`. Rebased onto master, which has moved to 1.30.0 and taken #436. The one conflict was `config/test-suites.ts`, where both branches appended a glob to `BROWSER_TEST_GLOBS`; both are kept. Everything else merged clean, #436's own changes to the same buffer-load path included. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
Michael GrundbergandClaude Opus 5
|
383f834704 |
fix(terminal): flush unsent local echo before the geometry replay
On a touch device the characters the user has typed live only in the local-echo overlay until Enter; they have never reached the PTY. The replay re-enters `selectSession` with `forceReload` on the session that is still active, and that branch nulled `activeSessionId` before `_cleanupPreviousSession` ran. The flush there is guarded on a session it can still see, so it was skipped, and the unconditional `_localEchoOverlay.clear()` that follows took the characters with it. Measured in chromium against the previous head: typing into the overlay and then making the call the replay makes left `pendingText` empty with nothing crossing into the delivery layer on either transport. The flush moves into `_flushLocalEchoTo(sessionId)`, called from both `_cleanupPreviousSession` and the `forceReload` branch before it nulls the id. The session is a parameter because the two callers mean different ones: cleanup flushes to the tab being left, the branch to the tab being reloaded. This was reachable before this branch, through the one gesture that already takes the `forceReload` path on an active session. What is new is that nothing the user does triggers it. The replay fires on its own the moment a tab switch finishes, which is exactly when someone typing into a still-loading terminal has text in the overlay, and on a phone beside an active desktop tab that is every tab switch. A seventh browser case pins it: it forces the overlay on, since headless chromium reports no touch support and the case would otherwise pass vacuously, asserts the typed characters really are sitting unsent, then triggers the replay and asserts they reached the session. Without the fix it fails with nothing delivered at all. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
Michael GrundbergandClaude Opus 5
|
e0d4477edc |
fix(terminal): keep the geometry replay to the pass that can converge
Three follow-ups to the source gate, each one measured rather than reasoned. A pane already drawing at the size the client just requested is left alone. The replay runs at `dimsAfterLoad`, so it can only change what is on screen if the pane was drawing at some other size; when the reported geometry already IS that size, the second pass captures the identical frame and pays a full reload to do it, including a visible re-flash, a dropped and reopened WebSocket and a deleted xterm snapshot. That equality is the signature of a clamp rather than a race: `getTerminalDimensions()` floors at 40x10 while `fitAddon.fit()` does not, so a terminal narrower than 40 columns or shorter than 10 rows reports a pane permanently bigger than itself and replayed on every tab switch without ever converging. A race never produces the equality, since its premise is that the pane was still at the size it was asked to leave. The declined-resize case does not produce it either, so that one still costs the single capped attempt and needs the pane-ownership question this does not touch. The full-history re-arm is unreachable and now says so. A pass that consumed the flag sent `full=1`, and the route answers `full=1` with `mux-full-history` or `history`, never `mux-visible`, so the source gate already rules out every such pass. The line stays for the invariant, but its comment no longer reads as if a page load retries, and the suite pins that it does not. The response no longer reports geometry for a body that carries no capture. The full-history path writes `capturedGeometry` from the cursor query and then returns '' for a pane holding nothing visible, which drops the source to `history` with the geometry already recorded: a `full=1` request whose capture reported 100x50 and returned nothing answered `source: "history"` with both fields set. Nothing acted on it, because the client ignores geometry on any other source, but the field said a frame had been drawn at a size when none had. The browser stub now derives `source` from the request the way the route does, rather than answering `full=1` with `mux-visible`, which the route cannot produce. Each case reaches a visible-frame response the way production does, by not being the first select of the page. Three cases pin the new behaviour and each fails without its guard: the clamp case sees two fetches instead of one, the scope case and the full-history case both see a replay the gate forbids, and the width case sees one fetch instead of two. The changeset now describes the change from 1.29.x rather than the difference between the two commits on this branch. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
Michael GrundbergandClaude Opus 5
|
5cfb98fb8b |
fix(terminal): compare capture geometry only on a visible-frame response
Only a visible-frame capture positions its rows absolutely, so only that frame can be damaged by a terminal of the wrong size. A `full=1` body is linear scrollback closed by a relative cursor move, which is relative precisely so the browser's row count need not match the pane's, and a `history` body is the byte stream, which carries no row alignment to protect. The geometry comparison ran on all three, so it fired most often on the one response it cannot help: `_fullHistoryLoaded` is empty on the first select of every non-shell session per page, and a session whose pane a desktop tab holds too tall to ever fit then paid a second whole-scrollback capture, reset and replay on every page load and every first tab switch. `framePositionsRowsAbsolutely` gates both the captured-geometry comparison and `sizeMovedUnderLoad`. A size that moved under a byte-stream or scrollback replay is healed by xterm's own reflow plus the SIGWINCH the trailing `sendResize` already sends. A pane WIDER than the terminal damages the same frame a second way, so `captureCols` is now compared rather than only logged. `formatPaneSnapshot` paints each row out to the pane's own width, so a narrower browser wraps every painted row, and the wrap on the last one scrolls the whole frame up by a row. The terminal response no longer falls back to `session.ptyCols`/`ptyRows` when the capture reported no geometry. The cursor query is what produces the absolute addressing in the first place, so a capture that lost it returned a raw frame that was never positioned, and a byte-history response was never positioned either. Naming the session's own PTY size there described a frame that does not exist and invited a repair for damage that is not present. `_ptyCols` is also written only by `resize()` while the PTY is spawned at the size queried from tmux, so it can be wrong on its own terms. Both fields are now absent instead, and the `Session` getters added for that fallback go with it. Two browser cases cover the new behaviour and each fails without its fix: a `mux-full-history` response with both dimensions mismatched asserts one fetch (two without the gate), and a `mux-visible` response wider than the terminal but short enough to fit asserts two (one without the width comparison). Corrects a claim in the comment above `capturedGeometry` in tmux-manager.ts. Both replay paths do not address rows absolutely; the full-history one ends in a relative move, which is the whole reason the gate is right. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
Michael GrundbergandClaude Opus 5
|
3edf9aae2f |
fix(terminal): replay a pane capture at the geometry it was taken at
A visible-frame capture repaints each row at an absolute position, counting up to the pane's height. A terminal shorter than that clamps every address past its own height onto its last line. The overflow rows then overwrite one another, and the rows underneath are lost. Replaying a real 50-row capture into a 30-row terminal rendered 28 lines of a 45-line command and drew the frame twice. Nothing in the response said what height the frame was built for, so the client could not detect this. A capture now reports the geometry it was really taken at through `capturedGeometry` on `PaneCaptureOptions`, and the terminal response carries it as `captureCols` and `captureRows`. When the captured pane is taller than the terminal, or the size that produced the capture did not survive the load, `selectSession` replays once at the size that stuck. `resizeRetry` caps that at one attempt, so two competing fits cannot trade replays forever. The retry re-arms the full-history flag only when the pass that ran had consumed it. A tab switch takes the bounded tail, so its retry takes the tail too: clearing the flag unconditionally would upgrade that switch into a fresh scrollback capture the user never asked for, which the route's own comments put at tens of megabytes. What this repairs is a capture that won a race against the resize meant to precede it. It does not repair a capture whose pane was too tall because `Session.resize` declined the resize outright, which it does for a small viewport while a desktop viewport's size claim is live. The retry re-sends the same declined resize and captures the same pane, and `resizeRetry` then stops it. Repairing that means changing who owns the pane size, which is a policy question this does not touch. The reported geometry still helps there, because the client can see the mismatch at all rather than being blind to it. Follows #395, #396 and #397, which fixed the other ways the replayed frame and the terminal could disagree. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
timkjrandClaude Sonnet 5
|
358aef16e3 |
fix(run): make the Instance count stepper work for every non-Claude mode
runOpenCode(), runCodex(), runGemini(), runAntigravity(), runPi(), runOmp(), runGrok(), and runDeepSeek() all ignored the "Instance count" stepper next to the Run button and hardcoded a single quick-start call — bumping the counter to 2 or 3 while on any of these modes silently launched exactly one session, with no error. Only runClaude() ever read it. Extract the shared launch-N-sessions-and-select-the-first loop into _launchQuickStartInstances(), reused by all eight modes, and _readTabCount() for the shared clamp-and-parse. Each mode still builds its own quick-start body (config differs per CLI), just via a closure passed to the shared loop instead of a single inline fetch. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> |
||
|
RandalixandClaude Opus 5
|
1040f6c489 |
fix(remote): a proxied host is reachability-unknown; scope remote: SSE per session
Review round 2 on #439. 1. The bare TCP probe connects to host:port, which a host behind a jump host or SOCKS proxy does not answer even while ssh works. Acting on that verdict drew a permanent banner over a healthy session, replaced a real "needs tmux" error with "not reachable" in quick-start, and - with a wake target - buffered every HTTP input for the life of the session, since the readiness poll could never succeed. `WakeableRemote` now carries `jumpHost`/`socksProxy`/`extraSshOptions`, and `isProbeable()` turns such a host into reachability-UNKNOWN: input is delivered, `checkReachable` / `checkHostReachable` answer `null` (never `false`), `ensureHostAwake` returns `'unprobeable'` (handled like `'no-target'`), the quick-start gate fires on `=== false` only, and `GET …/reachability` reports `reachable: null, probeable: false` so the banner has nothing to key on. A wake target can still be fired for it, blind: no readiness poll, no reattach, no toast - the response says only whether the packet went out. 2. `'remote:'` joins the session-scoped SSE prefixes. The create/attach wake has no session yet, so the registry names the requesting user (`ensureHostAwake({ requestedBy })` -> `username` in the payload) and `deriveSseHint` routes on it; with neither it fails closed to admins. Single-user mode is unaffected. Smaller, from the same review: - A flush write that fails now drops the remaining buffer (logged) instead of retaining it: the wake still resolved and marked the host reachable, so the retained chunk waited for the NEXT wake and was replayed hours later, after everything typed since. Same policy as the oversized paste. - The banner polls on tab activation (a user action) and on its 30 s timer only for a host with a wake target; a timer connecting to a host Codeman cannot wake is the traffic invariant #2 rejects keepalives for. A proxied host is never polled. - `probeRemoteHostReachable`, `runRemoteWakeCommand` and the default UDP socket refuse under VITEST, as remote-files.ts does. The guard caught a leak on the spot: `createDefaultRemoteWakeDeps({ probe })` overrode the probe but still polled readiness with the real one, so the shutdown test had been connecting to a production address. The poll now uses the injected probe. - docs/remote-sessions.md is additions only again (the reformatting is gone); the architecture-invariants overlap resolved itself in the merge. Live, against a throwaway instance with a non-routable ghost host: proxied -> no probe, no wake, the genuine ssh error after 10 s; direct (control) -> probe, magic packet, "did not come back" after the 40 s budget. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01QdGP4jUTjc9J2RYYykDrCG |
||
|
RandalixandClaude Opus 5
|
e271a65e79 |
Merge origin/master into feat/remote-host-wake
Resolves CLAUDE.md count tables (route counts recounted on the merged tree: 235 handlers, sessions 37) and keeps both the host-wake and the reboot-restore banner in index.html. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01QdGP4jUTjc9J2RYYykDrCG |
||
|
Codeman maintainer
|
3cdb4bf42e |
docs(terminal): the merge-time notes promised on #436
The four edits the review said would be folded in at merge, none of them code: the changeset becomes one user-facing paragraph, since it is what CHANGELOG.md and the release notes print; the `_bufferLoadFinishOpts` comment now names the second contributor to the duplicate window (`captureActivePaneBuffer` is `execSync`, so anything painted into the pane before the server read it is in the capture and is broadcast after the reply) and says why a `history` payload keeps the pre-existing discard when its exposure is the same; the `_finishBufferLoad` doc block moves from above `_beginBufferLoad` onto the function it documents; and the test file's header describes both rules the file now pins instead of only COD-144. Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> |
||
|
Ark0N
|
492f8d8ddf |
Merge pull request #436 from irisitymichaelgrundberg/fix/replay-output-that-arrived-after-the-capture
fix(terminal): keep the output a pane capture could not contain |
||
|
Devvyn
|
56209e7829 | Merge remote-tracking branch 'upstream/master' into feature/run-menu-custom-model-picker | ||
|
DevvynandClaude Sonnet 5
|
afb6754453 |
fix(custom-model): address third pre-merge review (Ark0N)
Blocker 1: the loading banner hides itself ~200ms after it reopens. - _showCenterStatus reuses one shared DOM node; dismiss() scheduled el.hidden = true 200ms later with nothing to cancel it. On the Claude path, switchingToast.dismiss() is followed by one same- origin request (5-30ms locally) before _watchLlamaSwapLoading opens the new banner -- well inside that window -- so the stale timer fired against the shared node and hid the fresh banner, leaving the whole model-load wait with no progress text, no log line and no reachable Cancel button. - Fixed by parking the pending timeout on the element and clearing it at the top of _showCenterStatus. Added a regression test that reproduces the exact repro (open, dismiss, reopen 20ms later, advance past 200ms) alongside the existing Cancel-button DOM tests; confirmed it fails without the fix and passes with it. Blocker 2: the swap-conflict warning named other users' sessions. - Both affectedSessions scans (POST .../custom-model and quick-start) walked the whole session map with no ownership filter, so in multi- user mode a non-admin pointing their own session at a shared endpoint learned another user's session name and id -- which with autoNameSessions on is that user's own prompt. - The swap is still blocked pending confirmation regardless of ownership (a foreign session is just as real a disruption); only which ones get NAMED back to the caller is scoped, via the already-imported canAccessOwned. Added a two-owner test to test/routes/session-custom-model.test.ts covering both the foreign-owner (blocked, not named) and same-owner (named) cases. Smaller ride-along fixes: - server.ts boot recovery now passes contextLength into applyCustomModelInjection, so CLAUDE_CODE_MAX_CONTEXT_TOKENS is correctly rebuilt into _envOverrides after a restart instead of surviving only because tmux retains the old setenv. - pumpLlamaSwapLogTail's finally now deletes by IDENTITY, not just by key, so an aborted pump finishing after a newer entry was created for the same endpoint can no longer delete that newer entry and orphan its connection. - docs/custom-model-endpoints.md now notes that clearing a custom model removes injected keys by name, including CLAUDE_CONFIG_DIR -- so a session that also had CLAUDE_CONFIG_DIR set via envOverrides (the per-client-account case) silently falls back to the default account on clear. Left for later, as flagged in the review itself: the quick-start case-scaffolding/cancel ordering (real behavioural reordering across a large handler, too risky to make without a live re-test), and retiring runCustomModelEntry's mode === 'claude' branch behind a launchStrategy registry field (explicitly deferred by the reviewer to "the next one"). Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01Ea59JhUmHBm1gRCsiYF33R |
||
|
Michael GrundbergandClaude Opus 5
|
f9edb33d15 |
fix(terminal): trim the padding and shared indent out of a copied selection
xterm hands back whole screen rows and trims only the cells that were never written to, so the real spaces a full-screen TUI paints across the unused part of a row count as content and reach the clipboard. Measured against Claude Code in a 282-column pane, single lines arrived carrying 138 trailing spaces, and every line carried the two-space transcript indent as well. Windows Terminal, iTerm2 and GNOME Terminal all trim that for you, decideAutoCopy already calls a wall of spaces "never what the gesture meant", and _selectTouchSelectionLine already treats those cells as padding — the mouse and keyboard paths never had the same rule. CodemanCopySelection.clean lives in constants.js beside decideAutoCopy, its pure sibling. It drops the trailing run from each line, and removes the leading run only where every selected row shares one. A selection of a single row keeps its run, because one row shares nothing with anything and stripping it would silently reindent one line of `git log` body text or one line out of `less`. A drag that began inside a row keeps its partial first line untouched and out of the measurement, which otherwise pins the shared run to zero and leaves every following row indented. Every pass over a line is a scan rather than a regex. `/[ \t]+(\r?)$/` is quadratic on a line whose spaces are followed by a non-space character, which is what right-aligned or centred TUI content looks like: measured over 50 000 rows with a 280-column run it took 2.9s, against 1.3ms for the scan, and a 2 000-column run took 16s. The scan is also the faster of the two on an ordinary padded row. cleanedTerminalSelection in terminal-ui.js is the half that needs the live terminal. It returns a COLUMN selection untouched: Alt+drag makes one, and a rectangle's rows lining up is the point of the gesture, so both halves of the clean would destroy it. xterm exposes the mode nowhere public, so the check reads terminal._core._selectionService, the way this file already reads terminal._core for cell dimensions, and cleans normally if a future xterm renames the field. A test pins that assumption against the library rather than against a stub repeating the literal. The Ctrl+C chord decides on the cleaned selection, not the raw one. A drag across the blank part of a row selects real padding spaces, so the raw text is truthy, and testing it would spend that press on a copy of nothing and make the user press again to interrupt. A padding-only selection is now dropped and the press falls through to the PTY, while Ctrl+Shift+C still never falls through. copyTerminalSelection gates on trim() for the same reason, since a multi-row drag across padding cleans to line breaks alone and a bare newline pasted into a chat composer submits it. All four of the main terminal's copy paths go through it: the Ctrl+C chord, right-click, the phone selection button and Auto Copy. The browser's own Edit menu copy, a disabled copy shortcut and the subagent windows still copy raw rows, as they did before, and the invariants doc now says so rather than claiming every copy is cleaned. Auto Copy resolves its own toggle before it reads the selection, since it is off by default and a selection can run to the 50 000-row scrollback ceiling. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
Michael GrundbergandClaude Opus 5
|
3730bc7df5 |
docs(terminal): correct what selectSession does with the viewport
The JSDoc on `_syncStickyScrollBaseline` said `selectSession` deliberately ends
at the bottom, so the baseline the replay samples is already true there. It
does not. `selectSession` calls `scrollToBottom()` after the write and then
ends at `scrollToLastNonEmptyLine()` (app.js:6512), which targets
`lastNonEmptyLine - rows + 2` and therefore parks ABOVE `baseY` whenever the
replayed frame keeps trailing blank rows — which a full capture does on
purpose, since no transform that can delete a line may run over one.
Its baseline really is a stale true. What covers it is the sticky snap itself:
since
|
||
|
Michael GrundbergandClaude Opus 5
|
75a028e825 |
fix(terminal): re-take the sticky-scroll baseline after a replay
A capture load now replays its queued tail, and that replay runs through `batchTerminalWrite`, which samples `_wasAtBottomBeforeWrite` before it queues. It runs inside `chunkedTerminalWrite`, before that promise resolves, with the terminal freshly reset and rewritten — so the sample is always true. The caller then restored the reader's position and the next `flushPendingWrites` scrolled straight back to the bottom off the latched flag, undoing it. The only thing in the way was `_hasRecentUserScrollUp()`, a 1500ms window a server-triggered refresh is usually past. `_syncStickyScrollBaseline()` re-takes the flag from wherever the viewport now sits, and the two paths that restore a position call it right after doing so: `_onSessionNeedsRefresh` and `_maybeRefetchFullHistory`. Those are the paths #259 and #205 exist for, and they are also where a non-empty queue is most likely, since a needsRefresh fires when output is flooding. Re-taking rather than suppressing the sampling: suppressing leaves whatever stale value the flag held from before the load, which on the full-history re-pull has no reason to be false. `selectSession` and `_onSessionClearTerminal` deliberately end at the bottom, so the sampled true is already the truth there and they do not call it. `_bufferLoadFinishOpts` gains the coverage the CI gate can see: both mux sources flush, `history` does not, and a payload naming no source does not. Its only coverage was the browser suite, which CI does not run. The JSDoc and the changeset now record the one duplicate window this cutoff cannot close. The server appends output to the byte buffer in the same tick it emits, but broadcasts on a batch timer — 8ms over WebSocket, 16 to 50ms over SSE — so a batch pending when `capture-pane` ran leaves the server after the reply and is replayed although the capture holds it. It is one batch interval wide against a recovery window spanning the whole chunked write, and closing it means flushing that batch server side before the capture. The second browser test asserts its session was created, so a failed create fails it instead of passing with zero hits. docs/architecture-invariants.md no longer claims the replay leaves the queued-event discard window alone. That clause now describes what decides how a load ends, the baseline rule, the batch window, and the three covering tests. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
DevvynandClaude Sonnet 5
|
9982a1325f |
fix(custom-model): address second pre-merge review (Ark0N)
Blocker: .center-status-banner never actually disappears.
- Add `.center-status-banner[hidden] { display: none; }`, same trap as
`.home-sessions[hidden]`: the author-level `display: flex` beat the
UA `[hidden]` rule, so `dismiss()` set `el.hidden = true` and the
card stayed laid out at `opacity: 0` with its text/cancel/close
children still `pointer-events: auto` -- an invisible 442x67 click
blocker dead centre over the terminal until the page reloaded.
- Added a regression test pinning the CSS rule, and documented the
banner (10001) and the swap-confirm/context-warning modals (10010)
in CLAUDE.md's Z-index layers list.
Stale wording pointed at the reverted sticky-toast default:
- .changeset/run-menu-custom-model-picker.md, CLAUDE.md, and the
`.toast-message` comment in styles.css all still said "toasts
default to sticky" after
|
||
|
DevvynandClaude Sonnet 5
|
1f32128ca9 |
fix(custom-model): address PR #430 pre-merge review (Ark0N)
Four blockers from the 2026-09-18 review: - PUT /api/model-endpoints/:id now merges modelContextLengths/ modelSizesGB back in from the stored record instead of trusting the editor's body, so renaming an endpoint or changing its default model no longer silently drops the context-window floor check and CLAUDE_CODE_MAX_CONTEXT_TOKENS injection. - custom-model:swapped-out is now session-scoped (added to SESSION_PREFIXES) instead of broadcasting to every connected client. - The quick-start custom-model path now hands setCustomModel() only the endpoint's own injected env vars, not the full merged set, matching the restart-in-place path — the full set put CLAUDE_CODE_EFFORT_LEVEL back after the Session constructor had already stripped it. - The quick-start launchModel override for pi/grok/omp is now applied generically via the registry's legacyConfigField, mirroring Session._withCustomModelLaunchModel, instead of three hardcoded mode === '<id>' branches a future CLI's injection recipe would miss. Also scopes the sticky-toast default (item 5): reverted the blanket "all error toasts are sticky" default, which had no container cap or eviction, back to a flat 3s; the one message that needs a moment to read (a failed custom-model apply) now passes an explicit duration: 0 at its own call site. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01Ea59JhUmHBm1gRCsiYF33R |
||
|
Codeman maintainer
|
bb8ada7e5f |
fix(reboot-restore): the merge-time items from the #442 review
Seven things, none of which changes what the feature does. 1. The rebuilt Session dropped `nameSource`, so the constructor re-inferred it from the name: a session the user renamed by hand to something shaped like `w<n>-<case>` came back as `placeholder`, and with auto-naming on the next prompt overwrote their name. The route persists right after, so the loss went to disk. `restoreMuxSessions()` already passes it. 2. The already-live sets were snapshotted once before a loop that awaits a real `startInteractive()` per entry, so by the tenth entry the snapshot was tens of seconds old and a conversation resumed by hand from the Resume list in that window was invisible to it: two panes on one transcript, the exact thing the check exists to prevent. Both sets are now read per iteration, and the late case is spent rather than re-offered for the same reason the batch case is. 3. Auto-resume no longer re-arms the pre-reboot `autoResumeAt` on this path. The stamp predates the reboot and the pane is new, so honouring it meant one click had every restored session type `continue` into itself about a minute later, unattended, against the route header's own promise that a restored session comes back idle and disarmed. The setting stays ENABLED, so it re-arms on the next real limit message. A Codeman restart still re-arms from the stamp, because the limit footer will not reprint on its own; the new option exists only to tell the two paths apart. 4. `discardPartiallyBuiltSession()` now also calls `recordSessionStopped()` and `ralphTracker.fullReset()`, the two teardown steps `_doCleanupSession` performs that it was missing. Cosmetic, but a run left open reads as still going in the away digest. 5. A restored claude session gets `seedAgentSessionPreamble()` like both create paths, so the agent skill's bootstrap stays a two-line loader. 6. The heuristic's container comment was wrong in one direction and quiet about the real gap: after a genuine host reboot a containerized Codeman sees the host's short uptime and the banner does appear. What it cannot see is a container-only restart, which is where this would help most. 7. The banner is hidden in a solo window, which shows one session and has no tab strip to put restored ones in. Also reverts 17 of the 18 hunks in docs/api-reference.md, which were Prettier reformatting of prose the PR does not otherwise touch (docs/ is outside the format glob), keeping only the Reboot restore section and repairing the two continuation lines that reformat de-indented; renumbers reboot-restore-ui.js to @loadorder 11.65, since 11.7 is admin-ui.js, which loads after it; and gives the feature its CLAUDE.md entry plus a route test for the multi-user workspace-forbidden branch, the only new rule that had nothing behind it. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
Ark0N
|
f32c4f60d5 |
Merge pull request #442 from irisitymichaelgrundberg/feat/restore-sessions-after-reboot
feat(sessions): offer to rebuild the sessions a host reboot destroyed |
||
|
Ark0N
|
9a503872d9 |
Merge pull request #441 from shenlvkang-collab/fix/android-last-char
fix(input): deliver a recovered keystroke before the Enter that submits it |
||
|
Ark0N
|
ff8dc92187 |
Merge pull request #424 from Ark0N/fix/terminal-history-anchor-after-parse
fix(terminal): restore the history anchor after xterm parses, not before |
||
|
DevvynandClaude Sonnet 5
|
db9729e1fc |
feat(custom-model): remove loading-banner countdown, add manual Cancel
Replaces the size-scaled expected-time estimate + matching auto-timeout with a generic hardware/model-size disclaimer and a user-driven Cancel button, per explicit request. Real load time depends on hardware this feature has no way to know (VRAM, storage speed, GPU contention), so the old estimate/timeout was a guess dressed up as a fact — worse, one that could kill a genuinely slow load partway through on slower hardware. - _watchLlamaSwapLoading (session-ui.js): dropped maxWaitMs/deadline entirely — polls indefinitely until ready or cancelled, no automatic give-up. Message is now "Loading <model> (<size>) on <endpoint> — this can take a while depending on your hardware and the model size.", with the real llama.cpp log line still on its own second line. Removed _MODEL_LOAD_TIME_MATRIX/_estimateModelLoad/ _formatRemaining (dead code once the countdown is gone) — _lookupModelSizeGB is kept, the GB figure still shows. - _showCenterStatus (panels-ui.js) gains opts.onCancel: renders a real "Cancel" button (distinct from the error-type "×" close button, since Cancel has a real consequence) that calls it on click. Caller owns what cancelling actually means, same split as the swap-confirm modal's promise-resolving buttons. - Cancelling dismisses the banner, shows an info toast (not an error — this was deliberate), and closes the session, mirroring what the old timeout used to do automatically but now on the user's own call. - New .center-status-cancel CSS (bordered pill button, distinct from the plain "×" close glyph). Test changes: removed the now-invalid timeout-auto-close/estimate tests, added cancel-flow tests (dismiss/toast-type/session-close, never-closes-with-no-sessionId, unbounded-polling), and real-DOM tests for the new Cancel button (bootAppWithRealCenterStatus, evaluating panels-ui.js instead of stubbing _showCenterStatus, since this button is worth verifying for real rather than just through the stub every other test in the file uses). Typecheck/lint/frontend-syntax clean; full suite shows no new regressions. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01RqZeHrRS6DYcGcGX2p9EwG |
||
|
DevvynandClaude Sonnet 5
|
2d3fc65758 |
feat(custom-model): show real-time llama.cpp backend status in the loading banner
Answers the underlying request behind investigating llama.cpp log
access: surface what the backend is actually doing, live, on top of
the existing countdown timer during a model load.
- getLatestLlamaSwapLogLine()/pruneIdleLlamaSwapLogTails()
(custom-model-routes.ts): one persistent GET /api/events (SSE)
connection held open per endpoint, parsing logData frames and
keeping the latest source:"upstream" (backend llama-server) line —
filtering out llama-swap's own source:"proxy" request-access lines.
Idle-closed after 30s of no polling, same 20s sweep as the existing
swap-displacement check.
- running-status route now returns logLine alongside the existing
isLlamaSwap/running fields.
- Frontend: _watchLlamaSwapLoading's banner gains a second line
("llama.cpp: <line>", bootlog timestamp/level/component prefix
stripped for display) that stays on the last real thing llama.cpp
said rather than clearing to blank between polls.
⚠️ Caught and fixed before merge, not after: the first cut targeted
GET /logs (the endpoint the name suggests), shipped a working-looking
implementation with passing tests, and only failed a live check against
the real Nemesis llama-swap deployment — /logs turns out to carry ONLY
llama-swap's own proxy request-access log and never once showed a
single backend line, even seconds after a real, confirmed model swap
triggered via a direct API call. GET /api/events's logData frames
(with an explicit source field distinguishing upstream from proxy) are
the only source that actually has backend output; corrected and
re-verified live end-to-end through an actual forced swap before
writing this commit, confirmed live to hold its connection open
indefinitely (unlike /logs, which closes after a fixed ~100KB).
12 tests for the corrected /api/events parsing (SSE frame buffering
across chunk boundaries, source filtering, malformed/wrong-type frames,
connection reuse, idle pruning) plus 2 for the frontend banner
rendering. Typecheck/lint/frontend-syntax clean; full suite shows no
new regressions (14 more passing than baseline, matching the new
tests; same pre-existing Windows-environment failures).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RqZeHrRS6DYcGcGX2p9EwG
|
||
|
DevvynandClaude Sonnet 5
|
5ddc028a2f |
feat(custom-model): detect and notify when a session's model gets swapped out later
The llama-swap conflict check on the apply/create routes only ever runs at THAT session's own launch/apply moment, and cannot see a swap caused by a DIFFERENT session's later, ordinary use. Confirmed live: a second Codex session picking a different model launched with no warning at all — nothing conflicted at that exact instant — yet it silently evicted the first session's model regardless (llama.cpp runs one model at a time). Reproduced and root-caused via direct API calls against a live test-picker instance rather than guessing. - detectCustomModelSwapDisplacements() (custom-model-routes.ts): groups live sessions with a customModel by endpointId, checks each group's endpoint via GET /running once, and flags a session whose own modelId is no longer in the running list. Read-only, best-effort per endpoint like refreshAllCustomModelHosts's sibling sweep. - Notifies once per displacement via a caller-owned de-dupe Set: a session id is added when displaced, removed once its own model is loaded/ready again, so a later genuinely-new displacement can notify again. - New periodic sweep in server.ts (CUSTOM_MODEL_SWAP_CHECK_INTERVAL_MS, 20s — much shorter than the 5-minute model-list refresh, since this is time-sensitive) broadcasts a new custom-model:swapped-out SSE event per displacement. De-dupe Set cleared per-session on session cleanup to avoid an unbounded leak. - Frontend: global toast (not tied to the displaced session's tab, since the point is warning before the user types into it) naming the session, its previous model, and what's currently loaded. Chose the "detect after the fact" scope (vs. checking before every message send, which would add a round-trip to every turn on every custom-model session) per explicit user decision after being presented the trade-off. 9 new tests for the detection logic (flag/clear/re-flag cycle, unreachable/deleted endpoints, non-llama-swap servers, multiple sessions on one endpoint). SSE registry bumped 158->159, parity test passing. Typecheck/lint/frontend-syntax clean; full suite shows no new regressions (9 more passing than baseline, matching the new tests; same pre-existing Windows-environment failures). Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01RqZeHrRS6DYcGcGX2p9EwG |
||
|
DevvynandClaude Sonnet 5
|
2c89359d42 |
fix(custom-model): Cancel/Launch-anyway buttons stacked instead of side by side
Neither dialog's footer had a row layout of its own to override, and .btn-toolbar is display:flex (a block-level flex container with no explicit inline-flex), so with no flex row context each button took its own full-width line and the two stacked vertically. The swap-confirm modal already had a .modal-footer rule (flex-end); the context-warning modal had none at all. Both now share one row-layout rule, centred rather than flex-end per feedback. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01RqZeHrRS6DYcGcGX2p9EwG |
||
|
DevvynandClaude Sonnet 5
|
962029bb3d |
fix(custom-model): context-warning/swap-confirm modals hidden behind status banner
Both dialogs can appear while the centred llama-swap status banner is still on screen (right after "Claude started — switching to llama-swap…") — the banner's z-index is 10001, .modal's base z-index is only 1000, so the dialog rendered fully behind it. Reported live against the context-window-too-small modal; the swap-confirm modal has the same structural bug for the same reason, so both get the fix. Also: both messages ARE the modal's whole explanatory content, not a one-line caption under a form field, so .form-hint's 0.65rem caption size read as illegibly small — worst on the multi-sentence context-window explanation. Bumped to 0.85rem/1.5 line-height/--text. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01RqZeHrRS6DYcGcGX2p9EwG |
||
|
DevvynandClaude Sonnet 5
|
b45a96358e |
feat(custom-model): warn before launching Claude on a model too small for its own overhead
Claude Code's own fixed per-turn overhead (system prompt + tool schemas,
~36.4K tokens measured live) can exceed a small local model's entire real
context before any conversation history exists to compact — confirmed
live twice as an in:0 out:0 failure on the very first message sent.
CLAUDE_CODE_MAX_CONTEXT_TOKENS cannot fix this: it only governs when
history gets compacted, and there is none on message one.
- exceedsSafeContextFloor() (custom-model-routes.ts): true when a CLI's
registry entry declares contextLengthVar (currently only claude) and
the model's discovered context is below CLAUDE_MIN_SAFE_CONTEXT_TOKENS
(40000). A no-op for every other CLI by construction.
- Both apply routes (POST /api/sessions/:id/custom-model and the
quick-start customModel path) check this before the swap-conflict
check and before launching/restarting anything, returning
{requiresContextWarning, modelId, contextLength, minSafeContextTokens}
— skipped when confirmed:true.
- Frontend: #customModelContextWarningModal + _confirmContextWarning/
_resolveContextWarningConfirm (session-ui.js), wired into both
_quickStartWithCustomModelConfirm and _runCustomModelEntryViaRestart
(the path Claude actually uses) ahead of the swap-confirmation check.
Explains the fix in-modal: give the model an explicit larger -c/
--ctx-size in llama-swap instead of relying on --fit-ctx, which
optimizes for the biggest model that fits rather than the biggest
context.
Tests added for the route-level warning/confirm/skip cases and the
frontend modal + launch-flow wiring. Docs updated (custom-model-
endpoints.md, wiki/Custom-Model-Endpoints.md) and the PR's running
changeset extended.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RqZeHrRS6DYcGcGX2p9EwG
|
||
|
Randalix
|
29984c639d |
fix(remote): stop the flush losing a chunk, and reset the host form's wake fields
Own review pass over the PR:
- `_flush` took the chunk out of the buffer only AFTER awaiting the write. Input
arriving during that await is enqueued (`waking` is still set, so it takes the
buffer path), and the 4 KB cap then drops the OLDEST chunk — which is the one
already on its way to the pane. The `shift()` that followed removed the NEXT
chunk instead, so the drop-oldest bookkeeping silently lost a chunk that was
never written, while the log line blamed the one that was. The chunk is now
removed before the await and re-inserted at the FRONT on a failed write, so the
order of the queue behind it is preserved. Regression test: a chunk enqueued
during the first write of a full buffer must still reach the pane (red against
the old order).
- `showCreateCaseModal()` reset the remote-host form fields but not the two new
wake inputs, so one host's MAC/command carried over into the next host that
form saved.
- The banner's pre-poll `wakeConfigured` labelled a command-only host as 'mac'.
Nothing reads the distinction, but the field is documented as which path is
configured, so it says the truth until the first poll corrects it.
- Stale `resolveRemote` comment ("only for sessions that have no usable target of
their own"): after the host config became authoritative in both directions it is
consulted on the TTL regardless.
|
||
|
Randalix
|
7b947fa3f1 |
fix(remote): close the wake-state leaks and the dishonest wake budget
Review follow-up on the wake-on-LAN PR (five findings, all of them about the state the feature keeps and the budgets it inherits): - Wake state is dropped by `WebServer.cleanupSession` instead of the two delete routes, so it now goes with the session on EVERY cleanup path (cron, admin, scheduled-run teardown, error paths) instead of surviving with up to 4 KB of the user's buffered keystrokes. `registerSessionRoutes` returns the registry so the server can own its lifetime without the wake-capable code living in `server.ts`; the wiring guard is updated to allow that and gains a second assertion that `server.ts` calls nothing but `drop`/`stop` on it. - `_effectiveRemote` returns before `_state`, so a LOCAL session no longer gets a wake-state entry — the input gate runs on every keystroke, so that entry used to be allocated for every session the user types in. - An input chunk larger than the 4 KB cap is dropped OUTRIGHT instead of being head-trimmed and then written as a fragment: one paste is one `input` value and was never typed character by character, so its tail is a partial command the user never sent. The drop is logged. - The manual wake button passes `REMOTE_WAKE_REQUEST_READY_TIMEOUT_MS` (40 s) like the create/attach paths, instead of inheriting the 90 s session default that the dashboard's reverse proxy cuts off at 60 s. - `RemoteWakeRegistry.stop()` aborts in-flight readiness polls (abortable sleep) and refuses new wakes, and `WebServer.stop()` calls it, so a restart during a wake no longer waits the poll out. - The banner/toast wording keys off a new `queuedInput` flag on the two SSE events, which is true only when the server actually holds bytes: browser keystrokes travel over the WebSocket, which never passes through the registry, so the wake BUTTON must not promise queued input. The failed-wake path also stops pattern-matching the error message (it re-asks the reachability route) and the WoL dialog says "admin-only" instead of "host not found" for a non-admin in multi-user mode. |
||
|
Michael GrundbergandClaude Opus 5
|
71ed7b127c |
fix(sessions): make the discard a real inverse of the construction
Third review of the reboot-restore branch. The narrow discard the previous commit introduced avoided everything cleanupSession() did wrongly, and in dropping so much of it also dropped four things it had to keep. The worst broke the retry the whole design rests on. setupSessionListeners() returns early while sessionListenerRefs still holds the session id, and the discard never cleared that entry. So the advertised flow — a rebuild fails because the agent binary is missing, the user fixes their PATH and clicks again — reused the same id, wired no listeners at all, and produced a tab that never showed output, never updated its status and never persisted. That is worse than the leak the discard was added to prevent. Three more registrations leaked with it: a RunSummaryTracker and its interval, an image watcher on the workspace, and the Ralph fix-plan watcher. The discard now undoes each registration setupSessionListeners() makes, in its order, and the per-session custom-model config directory, which holds the endpoint's API key literally and which nothing else would ever remove. The image-watcher flag was restored after the code that reads it, so a session came back reporting the feature as on with nothing watching. It moves to the before-spawn phase, and that phase now runs before the listeners rather than after them. The generation counter that lets a mid-restore dismiss win was global while clear() is ownership-scoped, so one user's dismiss discarded another user's unspent entries, permanently, because nothing rebuilds an in-memory plan. It is now per owner. Bumping only the owners of entries the dismiss removed was not enough either: take() has already emptied the plan by then, so a dismiss landing mid-restore saw nothing of that owner's to remove and invalidated nothing. The owners that matter are those with a restore in flight, filtered by what the dismissing user may access, and that is what clear() now bumps. Plan expiry bumps too, so a restore straddling the 24-hour boundary cannot hand entries back and give an expired plan another full day. Tests. discardPartiallyBuiltSession had no test at all: the only implementation any test ran was the mock's one-line stub, which is why every defect above was invisible. test/discard-partially-built-session.ts drives the real WebServer, and the retry assertion fails if the listener refs are left behind — verified by reverting the fix. The dismiss-race test drove the registry by hand, so deleting the route's generation argument left it green; it now goes through the route, and two further tests cover the multi-user cases. The mock context has now gone stale twice, because route tests pass it as `ctx as never` and tsconfig.json includes only src, so nothing ever compares it to the ports. A type-level guard is therefore inert — I wrote one and confirmed it never fires. test/mocks/mock-route-context-completeness.ts compares the mock's keys against WebServer.createRouteContext() at runtime instead, and names what is missing. Also: the API reference now says workspace-forbidden is judged against the owner's grant, the banner's module header no longer claims Restore always dismisses it, and the detail span gets the same min-width: 0 the phone rule already needed. Refs #411 Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
Michael GrundbergandClaude Opus 5
|
fa52753e8b |
fix(sessions): undo a failed rebuild without deleting the user's data
A second review of the previous commit found that its own repair for the session leak introduced three defects, all from reaching for cleanupSession() to undo a half-built session. That function is the user-initiated delete, not an undo. It banked the session's historical token and cost totals into the lifetime figures, and a reboot never runs cleanup, so those totals had never been counted before; every failed rebuild added them again. It saw the pin that had just been restored and demoted the record to `stopped`, which this pass reads as the durable marker of a deliberate kill, so a pinned session whose rebuild failed became permanently unrestorable. And it recursively removed `.claude-images` from the working directory, which belongs to the workspace rather than to the session, so a failed rebuild destroyed the pasted images of any other live session in that repo. discardPartiallyBuiltSession() now undoes only what the construction did: the map entry, the tab-layout slot, the listeners and any pane the launch created before throwing. The persisted record, the lifetime totals, the Ralph state and the workspace's files are left alone. Re-applying the persisted state also splits in two, which removes the first two defects at the root rather than only at the call site. The half that shapes the pane, the custom-model environment and the nice priority, still runs before the spawn. The half that is the session's own history now runs after it, so a session whose pane never started carries no totals and no pin for anything downstream to misread. The rest of that review. The multi-user workspace confinement re-check read the requesting user's grant, and returns true for an admin, so the case its own comment described was the one it missed; it now resolves the entry owner's grant through isWorkingDirAllowedForUsername, the way cron does. A forbidden workspace goes back on offer, matching both the registry's stated contract and the API reference. The client re-reads the plan after a restore instead of blanking the banner, so entries the server put back stay reachable, and a 409 now says a restore is already running rather than reporting a failure. A dismiss arriving mid-restore wins, through a generation counter the route carries across its take. The re-application also restores the tab colour, the image-watcher flag and the original pinnedAt, via a new Session.restorePin that does not re-stamp the pin time. The phone breakpoint gains min-width: 0, without which a nowrap flex item never shrinks and the buttons still overflow, and it folds into the existing phone block. Ralph's loop configuration still does not survive a restore, because toState() reads it off a live tracker and there is no way to keep it without arming the loop. The method now says so rather than leaving it implied. Tests. The capacity test could not fail on the property it existed for: it filled the board past the cap before the loop, so a single pre-loop check would have passed it. It now leaves one seat, so only a per-iteration check restores exactly one entry. New tests cover the ordering around the spawn, a throw before the loop returning the whole plan and releasing the flight, the dismiss-during-restore race, and that the failure path calls the narrow discard rather than the delete. The shared mock context gains the port method it was missing, which is what made the first run of these tests fail for the wrong reason. Refs #411 Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
DevvynandClaude Sonnet 5
|
7bbe408e44 |
feat(custom-model): live countdown on the loading banner; timeout is now an error
The loading banner now shows a live countdown against its own timeout (updated every poll, so every second by default) instead of a static "this can take a while" — e.g. "Loading qwen3.8-27b (16.4 GB, typically ~1-3 min) on llama-swap - 47s remaining". If the countdown reaches zero and the model still isn't ready, this is now treated as a real failure rather than a "keep waiting" shrug: - The banner turns into a sticky error (_showCenterStatus gains a `type` option - 'error' drops the spinner and adds a close button, since nothing is "in progress" anymore and a sticky message needs a way to dismiss it), naming the llama-swap server's own logs as where to look for detail. - The session that load was for is closed automatically (closeSession) - requested explicitly: a console left open and pointed at a model that never finished loading is worse than no console at all. Both apply paths now thread the new session's id through to _watchLlamaSwapLoading for this (new required 3rd parameter, after endpointId/modelId). _watchLlamaSwapGeneration's existing stale-call guard extends naturally to this: a superseded call's own eventual timeout recognises it no longer owns the banner and neither shows the error nor closes a session that may by then belong to a different, newer launch. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01RqZeHrRS6DYcGcGX2p9EwG |
||
|
DevvynandClaude Sonnet 5
|
55dae31530 |
feat(custom-model): estimate model load time from its discovered size
Discovery now also parses a GB figure out of an auto-discovered model's own description (llama-swap writes "Auto-discovered 16.35 GB - parameters auto-fitted by llama.cpp"), stored per model as modelSizesGB - unlike context length this needs no /props probe (the figure is right there in /v1/models) so it is populated for every model regardless of loaded state. A hand-configured profile's own description has no such figure and correctly gets no entry. The loading banner (_watchLlamaSwapLoading) now looks this up and, when known, shows it plus a rough estimate from a small size->time matrix (_estimateModelLoad/_MODEL_LOAD_TIME_MATRIX, session-ui.js) - "Loading qwen3.8-27b-ud-q4_k_xl (16.4 GB, typically ~1-3 min) on llama-swap... this can take a while" - and uses that same estimate's own bracket to scale the banner's default give-up timeout for a very large model, instead of a flat 5 minutes for everything. Explicitly labelled as an UNMEASURED, typical-hardware estimate in every relevant comment - this is not benchmarked against any real endpoint's actual storage/GPU, just a reasonable expectation-setter. A model with no discoverable size (a hand-configured profile) gets no size/estimate shown at all, matching the "never a guess" convention modelContextLengths already established. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01RqZeHrRS6DYcGcGX2p9EwG |
||
|
DevvynandClaude Sonnet 5
|
0af233c96c |
fix(custom-model): poll llama-swap readiness every 1s, check immediately, extend the cap
Reported: the "Loading..." banner stayed up past 2 minutes even though llama-swap itself had already finished loading the model. Three fixes: 1. pollIntervalMs default 3000ms -> 1000ms (as asked). 2. The loop now checks readiness IMMEDIATELY on entry rather than sleeping a full interval first - a model that's already ready (a fast load, or a re-apply onto one already loaded) shouldn't sit on "Loading..." at all. 3. maxWaitMs default 120000ms (2 min) -> 300000ms (5 min): a large (20GB+) model reading from disk can genuinely take longer than 2 minutes, which would have looked identical to the reported symptom - "still stuck past the point it should have resolved" - except it would have actually flipped to a "still waiting" warning toast at the 2-minute mark rather than staying on "Loading" indefinitely, so this alone doesn't explain what was reported, but is a real, separate improvement worth making. Also fixes a real, separate bug this surfaced while reasoning through the report: _showCenterStatus's banner is ONE shared, reused DOM node. A second call to _watchLlamaSwapLoading (e.g. switching models again before the first switch's loop had finished) would take over that shared banner, but the FIRST loop was still running and would eventually dismiss or overwrite it once ITS OWN deadline or readiness check resolved - clobbering whatever the second, current loop had put there. A generation counter (_watchLlamaSwapGeneration) now lets each call recognise when it no longer owns the banner and stop touching it silently, rather than only the last call to actually start ever safely reading or writing it. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01RqZeHrRS6DYcGcGX2p9EwG |
||
|
Michael GrundbergandClaude Opus 5
|
fbede5cd2a |
fix(sessions): act on the dual review of the reboot-restore route
Fifteen findings from two independent reviews of #442, three of them blocking. Every one is addressed here. The three blockers all sat in the restore route. A rebuild that threw after addSession left a registered session with no pane behind it, visible on the board, holding a layout slot and written to state.json, with its plan entry already spent; the catch now cleans the session up and puts the entry back. The loop checked neither the global nor the per-user session cap, so one click could take a board past a documented limit; capacity is now re-checked per iteration, because the loop is itself creating the sessions it counts. Worst of the three, a rebuilt session carried none of the state its constructor has no parameter for and then persisted itself over the record that held it, zeroing token and cost totals and dropping the pin. The pin matters most: pruning keeps a record only while it is pinned, so discarding it handed the record to the next stale sweep. A new reapplyPersistedSessionState() on the session port restores the pin, the token totals, auto-compact, auto-clear, auto-resume, nice priority, the flicker filter and the custom-model selection, and it runs before both startInteractive and the first persist. The rest, in the order they bite a user. Every rebuild failure was reported as workspace-missing, so the banner told users their repo was gone when the agent had simply failed to start; there are now distinct reasons, and the toast names each one. The client read restored and skipped off the outer response object rather than through the uniform envelope, so every count came back zero and neither toast ever fired. A board left open across the reboot never learned an offer existed, because the banner was seeded only on the page-load path; it now re-reads on every SSE init. The workspace check was existence-only, skipping the multi-user confinement that the create route applies, so a withdrawn grant would not be noticed. The banner had no phone breakpoint while its text was nowrap and its buttons could not shrink. Smaller: a missing workspace is now re-offered rather than dropped, while an already-open conversation is dropped rather than re-offered forever; a throw anywhere in the route returns the unspent entries instead of discarding the plan; the single flight is keyed by owner, since take() already stops two callers receiving one entry; the env clamp's header no longer claims a protection it cannot provide on this path today, and names the check that does bite; the three endpoints are documented in docs/api-reference.md; and the module header now says that os.uptime() reads the host's clock, so the feature is effectively off inside a container. The review also explained why the tests missed all of this: they proved the construction claim through their own copy of the construction rather than through the route, and the route tests used workspaces that did not exist, so no Session was ever built. test/routes/reboot-restore-rebuild-failure.ts mocks the Session module to drive the route's real path, and covers the cleanup, the reason reported, the re-application ordering, the broadcast and the caps. The mock route context gains the port method and the mux call the route needs. Refs #411 Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
Randalix
|
a7f74f374f |
fix(remote): keep the wake banner hidden after switching to a local session
refreshHostWakeBanner clears _hostWake before calling _hostWakeTick, so the clear branch's `if (this._hostWake)` guard skipped the repaint: once the banner had appeared for an unreachable remote session it stayed up on every chat (local ones included) until a reload, and the 30s ticker never cleared it either. Render unconditionally in that branch — _renderHostWakeBanner is idempotent with a null state. Reproduced in a real browser (Puppeteer, mobile viewport): state went null but banner.hidden stayed false. Regression test added in test/host-wake-banner.test.ts (red before, green after). |
||
|
DevvynandClaude Sonnet 5
|
01b32ee6cd |
fix(custom-model): move the switching/loading status to a centred banner
The "Claude started - switching to <endpoint>..." and "Loading <model> on <endpoint>... this can take a while" messages lived in the top-right toast corner along with everything else, easy to miss given they can each sit on screen for well over a minute (a real llama-swap model load). Adds _showCenterStatus() (panels-ui.js): a single, reused, screen-centred banner with a spinner, non-blocking (no backdrop, pointer-events: none on the wrapper) so it never gets in the way of using the app while it's up. Both call sites (_runCustomModelEntryViaRestart's switching message, _watchLlamaSwapLoading's loading message) now use it instead of showToast. Every OTHER status in these two flows - the llama-swap conflict warning already moved to its own modal, apply failures, cancellation, and _watchLlamaSwapLoading's own final "ready"/"still waiting" outcome - stays exactly where it was, in the corner. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01RqZeHrRS6DYcGcGX2p9EwG |
||
|
DevvynandClaude Sonnet 5
|
2936ba6e3d |
fix(custom-model): replace the native confirm() popup with an in-app modal
The llama-swap "this will unload it for session X" warning used a native browser confirm() popup, which looks out of place next to the rest of the app's own modals. Adds #customModelSwapConfirmModal (index.html) with Cancel/Switch-anyway buttons, styled to match the app. _confirmModelSwap(message) shows it and returns a promise that resolves true/false the same way confirm() would; _resolveModelSwapConfirm(proceed) (wired to both buttons and the backdrop click) settles it. Both llama-swap conflict call sites (_quickStartWithCustomModelConfirm for the one-shot launch path, _runCustomModelEntryViaRestart for Claude's restart path) now await this instead of calling confirm() directly. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01RqZeHrRS6DYcGcGX2p9EwG |
||
|
DevvynandClaude Sonnet 5
|
83033b4299 |
fix(custom-model): show a status toast during Claude's native-boot-then-restart window
Claude stays on the launch-then-restart path (see runCustomModelEntry's own comment for why), but with nothing on screen during that window, a native boot that briefly talks to the cloud model read as "the endpoint didn't apply" rather than "the switch hasn't happened yet". A sticky "Claude started - switching to <endpoint>..." toast now covers the whole window from the native launch through the apply call, updated in place (never stacked) as the outcome resolves: dismissed on cancel or failure (replaced by the existing cancellation/error toast), handed off to _watchLlamaSwapLoading's own sticky toast when a model swap is in progress, or updated to the existing "Pointed at ... - restarting" message and auto-dismissed after 3s on a plain success. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01RqZeHrRS6DYcGcGX2p9EwG |
||
|
DevvynandClaude Sonnet 5
|
f865f74a0f |
feat(custom-model): launch directly on the endpoint, no restart, for 7 of 8 CLIs
Fixes the visible double-launch reported on Codex: picking a custom-model
Run-menu entry launched natively first, waited for it to settle, then
restarted it in place with the endpoint applied. Necessary for the design at
the time, but visibly a native boot immediately followed by a second one -
worst on a CLI whose TUI fully reinitializes on a restart, confirmed live on
Codex.
POST /api/quick-start gains an optional customModel field
({endpointId, modelId, confirmed?}). When present, the route mints the
session's id itself (crypto.randomUUID()) before constructing it, computes
the same injection the existing POST /api/sessions/:id/custom-model route
computes (including the llama-swap conflict check from the last commit -
same {requiresConfirmation, currentlyLoadedModel, affectedSessions} shape,
no session created until confirmed), and launches the session already
pointed at the endpoint: env vars via the constructor, and the launchModel
override merged onto piConfig/grokConfig/ompConfig using the registry's own
launch.legacyConfigField the same way session.ts's restart path already
does. No restart at all - setCustomModel() afterward is bookkeeping only.
Wired into 7 of 8 launch functions (session-ui.js): openCode, codex, gemini,
pi, grok, deepseek, omp. Claude stays on the original launch-then-restart
path for now: its own --resume-based restart is far less jarring than the
other seven's, and runClaude()'s multi-tab launch plus docker-config-drift
confirm/retry loop make folding it into the one-shot path separate,
higher-risk work than the other seven's each-a-single-simple-launch shape.
Also fixes a pre-existing 'mode === omp' branch flagged by the CLI-id
static guard (test/cli-registry-no-id-branching.test.ts) - the ompConfig
launchModel merge is the same 'legacy <Mode>Config plumbing' category as
the six sibling branches already allowlisted there, just newly literal
where it was previously only inside resolveOmpConfigForCreate's own check.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RqZeHrRS6DYcGcGX2p9EwG
|
||
|
DevvynandClaude Sonnet 5
|
bcebc81fcd |
feat(custom-model): detect llama-swap model conflicts before switching
Root-caused the user's earlier confusion ('the terminal says opus even though
something is waiting for llama to load'): llama.cpp runs exactly one model at
a time, and llama-swap unloads/reloads it on demand - a swap can take
anywhere from a few seconds to well over a minute, during which a session
looks indistinguishable from one still on the native backend.
1. Feature-detects llama-swap (vs. plain llama.cpp/any OpenAI-compatible
server) via its own GET /running, which plain llama.cpp has no concept of
at all. New GET /api/model-endpoints/:id/running-status route exposes this
read-only, for the frontend's polling loop below.
2. Before applying a selection, POST /api/sessions/:id/custom-model now checks
what llama-swap currently has loaded. If it differs from the requested
model AND another live session's own customModel selection is actively
using that loaded model, the apply is refused with a
{requiresConfirmation, currentlyLoadedModel, affectedSessions} payload
instead of silently switching. A "confirmed: true" field on the retry
skips the check. Switching with nothing else affected proceeds
immediately, no confirmation asked, only ever when there is something to
warn about.
3. The frontend (runCustomModelEntry) shows a native confirm() naming the
affected session(s) and the model they'd lose, matching this codebase's
existing convention for this class of decision (delete case, kill
session, etc.) rather than a new modal. On a successful apply the response
also carries modelSwapInProgress; when true, a new _watchLlamaSwapLoading
poll shows a sticky "Loading <model>..." toast via the new running-status
route until llama-swap reports the target model ready (bounded at 2
minutes), so a prompt sent mid-swap reads as "loading", never as silence
or an answer from whatever was loaded a moment before.
Checks are read-only against llama-swap's own /running - never /props, which
takes a ?model= and can itself trigger a load as a side effect of asking.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RqZeHrRS6DYcGcGX2p9EwG
|
||
|
Michael GrundbergandClaude Opus 5
|
da933d70be |
feat(sessions): offer to rebuild the sessions a host reboot destroyed
A host reboot takes the tmux server down with it, so every pane dies, reconciliation finds nothing to attach to, and the board comes up empty. Picking yesterday's work back up meant finding each conversation in history and resuming it by hand, one at a time. The boot pass now works out what the reboot killed and leaves it on offer. It runs inside restoreMuxSessions(), in the window where reconciliation has reported the dead sessions and cleanupStaleSessions() has not pruned their records yet, which is the only place the records can still be read. The board shows a banner, and nothing is created until the user clicks it. A click rather than an automatic restore is what makes the reboot heuristic acceptable. The heuristic cannot tell a reboot from a crash that took tmux down inside the same window, so it decides whether to ASK, never whether to act: a wrong yes costs a line of text the user dismisses instead of N CLI processes nobody asked for. Four things are re-checked when the click arrives rather than trusted from boot, because hours can pass and the board moves on. The owner's privilege grant re-resolves through the env clamp. The workspace must still be on disk. A conversation the user already resumed by hand from the Resume list is skipped, since two panes running --resume on one conversation would fight over the same transcript. Entries leave the plan synchronously before the first await, and the route is single-flighted, so a double-click or two devices cannot both reach the same entry. A restored session comes back attached, idle and disarmed. Respawn controllers and Ralph loops are deliberately not re-armed: a machine that just came up is the worst moment to turn an autonomous run loose. Its workspace hooks are installed by the restore route itself, because the boot-time sweep sits behind a gate that is false after a reboot and has finished long before the click; without them a session goes silently blind, with no stop or idle events for respawn, no Approvals Inbox item and no red tab on a blocking dialog. Stats collection starts the same way. The pane is new, so the conversation continues and the terminal scrollback does not. The banner says so rather than letting an empty pane read as a broken restore. The plan lives in memory only. A server restart drops it, which costs the convenience this adds and never the conversation: the conversation is the transcript under ~/.claude/projects, which the Welcome screen's Resume list and the Session Manager already read, so a dropped plan returns the user to resuming by hand. clampEnvOverridesForOwner moves to src/session-env-clamp.ts, since the question it answers is about session privilege rather than about HTTP and it now has a caller outside the route layer. Its test hook stays re-exported from session-routes.ts. Claude sessions only for this pass. The other CLIs name their thread in their own config object, which this does not thread through yet. Remote and docker sessions are skipped on purpose, because both need another host or a container to be up and a freshly booted machine cannot promise either. Refs #411 Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
DevvynandClaude Sonnet 5
|
5c25a52f95 |
fix(custom-model): wait for a freshly launched session to go idle before applying
Root cause of every 'Session is busy' apply failure reported from live
testing: a just-launched CLI reports itself 'busy' for its own startup
(boot spinner, workspace-trust check) well before runCustomModelEntry's
apply call could reach it, and the apply route's isBusy() guard correctly
cannot tell that apart from a real turn in progress — it exists precisely
to refuse restarting a session mid-turn, and a fresh boot looks exactly
like one from the outside. Confirmed live: replaying the identical apply
call by hand against the same session, once it had settled, succeeded
immediately.
Fixed by waiting on the session's own readiness signal before applying:
GET /api/sessions/:id/wait?until=idle&timeout=20000, one GET already built
for exactly this ('Agent wait primitives', CLAUDE.md) rather than inventing
a client-side poll loop. A timeout there is a normal 200 per that
endpoint's own contract, never an error, so a session still busy after 20s
just reaches the apply call anyway and gets the route's own honest error —
now visible, since the previous commit made error toasts sticky and
stopped discarding the real error text.
Tests: new case in custom-model-run-menu-ui.test.ts pins the ordering (the
wait call happens, and strictly before the apply call) and its exact query
string.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RqZeHrRS6DYcGcGX2p9EwG
|
||
|
DevvynandClaude Sonnet 5
|
409a6e65f9 |
fix(custom-model,toast): surface the real apply error, and make error toasts sticky with a close button
Two related fixes, both needed to actually diagnose 'Session started on the native backend — could not apply the custom endpoint' reports from live testing: 1. runCustomModelEntry()'s apply call went through _apiJson(), which unwraps a success body but SWALLOWS a failure response entirely and returns null — discarding the one thing (error, errorCode) that would tell 'endpoint unreachable' apart from 'not a discovered model', 'remote/Docker session', or a dozen other real causes the apply route already reports distinctly. Switched to _api() so the actual response body is read on failure too, and the toast now includes the real message. 2. showToast() defaulted every toast, error or not, to a 3s auto-dismiss with no way to read it again — exactly what made the above generic message impossible to act on even before the fix above. Error toasts now default to sticky (duration: 0, no auto-dismiss) unless a caller opts into a duration, and every toast — sticky or not — gets an explicit close (x) button, since a sticky toast with no way to dismiss it would just accumulate across repeated failures. Tests: custom-model-run-menu-ui.test.ts's two apply tests updated for the _api() switch (their mocks previously stubbed _apiJson, which the apply call no longer goes through), plus a new test pinning that the real server error string reaches the toast on a failure. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01RqZeHrRS6DYcGcGX2p9EwG |
||
|
codeman-localandClaude Opus 5
|
a1c35da0d8 |
fix(input): deliver a recovered keystroke before the Enter that submits it
Every message typed on an Android phone lost its last character. An Android soft keyboard commits the last typed character and sends the Enter key in ONE InputConnection transaction, so the committed-text `input` event and the Enter keydown are both processed before any zero-delay timer runs. The orphaned-input recovery from #388 resolved its candidate only on such a timer, and that lost the character twice over: * ORDER — xterm emits `\r` synchronously from the Enter keydown, and the local-echo composer submits `pendingText` right there. The recovered character arrived one macrotask too late to be part of the prompt. * LOSS — that same `\r` bumps the canonical counter, so by the time the candidate resolved, `canonicalCount > snapshot` read as "xterm spoke for this keystroke" and stood the recovery down. The character was not merely late, it was dropped. Drain pending candidates synchronously at the next keydown instead, from xterm's custom key handler, which runs before xterm processes that key. The counter then still holds the value it had while the candidate's own keystroke was current, so the stand-down decision is made against the right keystroke, and the recovered byte reaches the composer ahead of whatever the new key emits. The timer stays as the fallback for a keystroke with no key after it. Physical keyboards are unaffected: there the timer has already resolved the candidate long before the next key arrives. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
DevvynandClaude Sonnet 5
|
9a9e542a7d |
fix(custom-model): bound the model-picker dialog's height and make its list scroll
The dialog had no max-height at all, so an endpoint with many discovered models grew it past the viewport with nothing to scroll — reported live as both "takes up the full page" and "the list is truncated", which turn out to be the same bug. Gives #customModelPickModal .modal-content the same bounded-height + scrollable-body shape cronModal's .modal-lg already uses (max-height + flex column on the content, overflow-y:auto + flex:1 on the body), scoped by id rather than folded into the shared .modal-sm class three other modals already use for short, fixed content. max-height: min(70vh, 520px) scales with the viewport (a phone gets 70% of its height; a 4K display never gets a needlessly tall dialog) rather than committing to one fixed pixel value that would be wrong at either end. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01RqZeHrRS6DYcGcGX2p9EwG |
||
|
DevvynandClaude Sonnet 5
|
5a9ff07f57 |
feat(custom-model): ask which model on launch when an endpoint has more than one, and re-discover models every 5 minutes
Two enhancements requested after live-validating PR #430 against a real llama.cpp server: 1. Model picker dialog. Picking a Run-menu Custom Endpoints entry used to apply the endpoint's defaultModelId (or the first discovered model) silently. Now, via the new selectCustomModelEntry() (session-ui.js): - exactly one discovered model launches straight away, same as before - two or more open a new #customModelPickModal listing every discovered model; defaultModelId (if set) is marked but never auto-chosen, since the point of asking is letting ONE launch deliberately differ from the saved default, not just confirming it The endpoint is re-fetched at click time rather than trusting anything cached from the dropdown's own render, since the model list can have changed (the sweep below, or a settings-panel edit) since it opened. runCustomModelEntry() itself — the actual launch, routed through run() for the in-flight lock, snapshot-guarded against applying to the wrong session — is unchanged; it now just always receives an explicit model id from one of these two paths instead of computing one itself. 2. Periodic re-discovery. Every saved endpoint's models now refresh automatically every 5 minutes in the background (CUSTOM_MODEL_REDISCOVER_INTERVAL_MS, server.ts, registered the same way as the Codex plan-usage poll it sits beside — this.cleanup.setInterval, off under testMode), so a model the server starts or stops serving shows up without another manual "Discover" click. The manual POST .../discover-models route and the new refreshAllCustomModelHosts() sweep (custom-model-routes.ts) now share one pure merge step (applyDiscoveredModels: stamps lastDiscoveredAt, drops a defaultModelId that no longer appears) rather than two copies that could drift. The sweep is best-effort per host — one endpoint being unreachable on a cycle never blocks the others — and re-reads the store before each host's write, keyed by id, so a concurrent edit or delete from the settings panel always wins over a sweep that started before it. Tests: test/custom-model-endpoint-rediscovery.test.ts is a new, dedicated file for the sweep (kept separate from custom-model-routes.test.ts because that file's data dir is shared across every test in it — one temp HOME per FILE, not per test — which would make a sweep-touches-every-host assertion meaningless there). test/custom-model-run-menu-ui.test.ts gained a new describe block driving the real picker modal through JSDOM: single-model bypass, multi-model dialog with the default marked-not-chosen, picking a row closes the modal and launches with that exact model, the endpoint re-fetch, and the two "vanished by click time" toast paths. Docs: docs/custom-model-endpoints.md, docs/wiki/Custom-Model-Endpoints.md, docs/api-reference.md and CLAUDE.md's dense feature paragraph all updated — the last of these also caught up two sentences that had gone stale after the draft-review fixes landed (the picker routes through run() now, not a raw run*() call). Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01RqZeHrRS6DYcGcGX2p9EwG |
||
|
DevvynandClaude Sonnet 5
|
60e1bd52f7 |
fix(custom-model): act on the draft review — unparseable onclick, unwrapped envelope, wrong-session apply, missing lock, no tests
Addresses every blocker, both majors, and all but one minor from the
maintainer's review of the draft PR.
Blockers:
1. Every generated inline onclick was unparseable. JSON.stringify's own
double quotes terminated the double-quoted HTML attribute at the first
one, leaving btn.onclick null on every picker entry and every Discover/
Edit/Delete button. Fixed with escapeHtml(JSON.stringify(...)) per
argument, the same idiom deleteCase's onclick already uses four lines
away in session-ui.js. This also closes the live-HTML-injection route
through modelId (server-controlled, from the endpoint's own /v1/models
reply): with quoting intact, a `>` inside it can no longer terminate the
<button> tag early.
2. GET /api/model-endpoints wraps its body in the {success,data} envelope
like every other /api route (server.ts's preSerialization hook applies
to arrays too), so Array.isArray(hosts) was always false in production
and the picker/settings panel silently saw nothing. Both call sites now
go through _apiJson(), which already exists for exactly this.
3. A failed or declined run*() (missing CLI, isBusy, a caught exception)
returns normally without ever changing activeSessionId, so the apply
step used to silently re-point and restart whatever session the user was
already looking at. runCustomModelEntry() now snapshots activeSessionId
before the launch and requires it to have actually changed.
Majors:
4. Routes the launch through run() itself via a temporary _runMode swap
(never persisted — setRunMode() would sync it to the server) instead of
a parallel hardcoded dispatch table, so a custom-model launch now holds
the same _runInFlight lock every other Run click gets. This also
resolves the "hardcoded runners map contradicts the PR's own design"
minor: dispatch is run()'s own, so a CLI whose customModelInjection
recipe lands later needs no update here.
5. New test/custom-model-run-menu-ui.test.ts drives the real session-ui.js
against a JSDOM window (runScripts:"dangerously" — this JSDOM only ever
parses markup this module generated itself) for exactly the DOM-level
facts the review said needed no Playwright and no tmux: a generated
button's onclick genuinely compiles and fires, a dangerous modelId never
produces a live element, the envelope unwrap works, the session-changed
guard holds, run() actually gets called (proving the in-flight lock
engages), and _runMode is restored afterward. Confirmed against the
pre-fix code first (reproduces btn.onclick === null exactly) so this
isn't a vacuous pass. Plus new tests in custom-model-routes.test.ts and
render-index-html.test.ts for the other fixes below.
Minors:
- Generated entries now filter through isCliAvailable(), matching
_refreshRunModeAvailability's own gating of the stock entries.
- The CRUD panel is now gated on customModelEndpointsEnabled
(applyCustomModelEndpointsVisibility(), wired to the toggle's onchange
and to settings-modal open) instead of always rendering; the endpoint GET
no longer fires unconditionally either.
- API keys are never handed back to the browser on GET, POST or PUT —
redactApiKey() replaces the field with a computed apiKeySet: boolean, and
a PUT with no apiKey now keeps the stored one server-side
(applyStoredApiKey()) instead of the client resending a value it was
never given. New tests cover both directions (kept vs. replaced) by
observing the actual auth header a subsequent discovery request sends.
- "+ Add endpoint" hides for a non-admin in multi-user mode
(_applyCustomModelAdminGate(), also wired to admin-ui.js's codeman:me
event, since the real role can resolve after settings were first opened)
— endpoint writes were already admin-only server-side, but the button
used to render for everyone and eat a 403.
- design doc (custom-model-endpoints-plan.md §4) now says up front that its
toolbar-button design was superseded by the Run-menu picker.
- docs/api-reference.md gained a Custom Model Endpoints section (every
route, the apiKeySet/defaultModelId contract, the restart mechanics).
- Wiki page now covers un-pointing a session (curl/delete, no UI yet) and
that the picker is desktop-only for now.
- .set-inline-form uses --control-bg instead of a hardcoded black alpha
(CLAUDE.md already records that exact literal turning the settings
preview into a grey slab on light skins), .run-mode-custom-models gets
the same gap: 2px .run-mode-menu's own flex gap only applies one level
up, and the index.html comment naming the wrong function is fixed.
- __codemanCustomModelClis's JSON is now escaped against a literal
</script> (CliEntry.label is user-clis.json-settable, unlike
__codemanCliAvailable's booleans-only payload) via a new exported
escapeScriptJson(), pure and unit-tested without needing a WebServer.
- Added defaultModelId + the new /v1/model-endpoints routes to
docs/api-reference.md; left the "no zh-CN for the new Models-section
group" minor unaddressed only insofar as the wider Models section (task
routing, thinking effort, etc.) has never had zh-CN coverage either —
everything this PR itself introduces (labels, hints, button text, the
Run-menu's "Custom Endpoints" header) IS translated in i18n.js.
Regression caught while fixing #4: the admin-gate's codeman:me listener is
a module-level document.addEventListener() call, which threw in
run-mode-ui.test.ts's minimal vm-context fake document and failed all 10
of that file's tests. Fixed with optional chaining before it ever reached
the branch this commit lands on; full targeted suite (route tests,
structural guards, every settings-ui.js-loading frontend test) reverified
green afterward.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RqZeHrRS6DYcGcGX2p9EwG
|