Rebased over #390, which moved the phone tier's cutoff from 430px to
600px. The palette's compound fold rule now lives in the 600-768px band
mobile.css pads, the cascade samples the palette inside that band, and
the closed iPhone Duo (466pt) is a phone rather than a small tablet while
the open one (626pt) stays a tablet. Comments in both stylesheets, the
device registry, CLAUDE.md and architecture-invariants say 600.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
CLAUDE.md's folding-devices rule gains the two new invariants (a shape change
with the keyboard up baselines to window.innerHeight; a base gutter overridden
by a later @media block needs its own zero-base fold restatement, and a
compound rule written against a mobile.css shorthand is scoped to that band)
plus the architecture-invariants pointer it lacked; the new Folding devices
section there carries the mechanisms and the measurements. The device count
is 138 since the two Duo profiles landed (68 Playwright + 70 custom).
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Three instructions a future contributor would follow literally were stale after
the last review round: the "Adding a CLI" checklist sent the agent-image reason to
AGENT_IMAGE_SPECIAL_CASES, a constant that no longer exists (it is
discovery.install.agentImageLayer on the entry in stock.ts), the trust-boundary
paragraph credited the embedded-commands pin to the invariants test when it is
test/cli-catalog-sync.test.ts, and install.sh claimed "the parity test" pinned the
DeepSeek Harness banner when no test did. That pin now exists: the invariants test
asserts the script's grep literal and the registry's discovery.identity.regex agree
on "DeepSeek Harness", and the comment names it.
docs/docker-cases.md separated the two reasons a CLI stays out of the shared npm
layer (no npmPackage at all versus an agentImageLayer entry), which it had folded
into one, and architecture-invariants no longer lists the agent image's CLI set by
hand.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
House style, and these land in the changelog. Only the sentences added in the
previous commit are touched; the em-dashes in contributor text and in the
pre-existing COD-54/COD-115 comments are left alone.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
#409 (Claude truecolor). The changeset becomes the changelog, and its premise
does not hold on tmux 3.2 or newer. Measured here on tmux 3.4: `default-terminal`
sits at its compiled default of `tmux-256color`, a live claude pane reports
`TERM=tmux-256color`, and supports-color reads that as 256 colors, where
rgb(55,55,55) lands on ESC[48;5;237m — visible, just not the color the theme
named. The invisible block the PR describes needs TERM to resolve to a 16-color
entry: tmux older than 3.2, or a ~/.tmux.conf setting `default-terminal screen`,
which Codeman's own tmux server does read (it passes no -f). Both the changeset
and the invariants paragraph now say that, so the next report here gets paired
with the reporter's tmux -V instead of being read as universal. The change itself
stands on the simpler argument: claude was one of two entries not asking for
truecolor while twelve do.
Also reorders buildClaudeEnv(). It applied the registry's unset/exports AFTER the
whole env was built, so a clis.json entry naming CODEMAN_HOOK_SECRET_FILE or PATH
would strip it on the direct-PTY path while the tmux pane kept it — buildEnvExports()
emits `...cliEnv` ahead of `export CODEMAN_MUX=1` and cannot. The block now runs
first and Codeman's own keys are assigned on top, matching the pane.
#404 (Ctrl+Z trap). Adds the missing changeset, and records what the trap does
not cover: an agent CLI already holds its tty with ISIG off (verified on three
live panes: `susp = ^Z -isig -icanon`), so this is defence for the startup window
rather than a fix for the steady state, and two input paths still reach the PTY
unfiltered — the mobile accessory bar's one-shot Ctrl and the CJK textarea.
#399 (path picker sort). The server sorts by name and cuts at 500, so the client
sorting those 500 by date gives "the newest of the first 500 by name", which is
wrong in exactly the >500-entry folder the date sort exists for. The status line
now says "(first 500 by name)" so the cut is legible, with the reasoning parked
on _sortEntries.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
buildClaudeEnv(), the direct-PTY fallback taken when mux creation fails, now
reads getCli('claude').env and applies its unset and exports lists. It used to
delete COLORTERM and CLAUDECODE from a hand-maintained list of its own, which
left it contradicting the registry entry that the tmux pane and the attach
client both read. An engine value needing a mux name has nothing to resolve
against on this path, so it is skipped rather than guessed.
Claude no longer unsets NO_COLOR. The invisible-background bug does not need
it, and unsetting it overrides a preference the user set deliberately, so a
user who exports NO_COLOR globally keeps monochrome panes. The other seven
truecolor CLIs still unset it; that inconsistency is intentional and the
comment on the entry says so.
The invariants doc gains a Terminal colour env paragraph under Session launch
modes, where a reader looking up Claude will find it — the previous sentence
sat under a heading that lists only the non-Claude CLIs. It now says the lists
are the stock catalog and a clis.json override replaces them wholesale, and
that the declarations reach the tmux pane, its attach client and the direct
PTY but not a remote pane, whose command carries no env exports at all. Docker
hands COLORTERM=truecolor to every mode, including the two the registry says
must unset it.
The changeset named six peer CLIs and there are seven: deepseek also exports
truecolor. A test beside the existing OpenCode assertion pins the new
behaviour, so a future registry edit cannot make the backgrounds vanish again
in silence.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude draws the user's own messages as a block of background color, and
inside a Codeman pane that block was invisible. tmux hands each pane
TERM=screen, which supports-color reads as 16 colors, and Claude's registry
entry deleted COLORTERM on top of that. Claude therefore quantized every RGB
color its theme asked for down to the basic palette, where rgb(55, 55, 55)
and every other dark background becomes ESC[40m, the terminal's own black.
Changing the color in a custom Claude theme moved nothing on screen.
Claude now exports COLORTERM=truecolor and unsets NO_COLOR, matching codex,
gemini, antigravity, pi, grok and omp. CLAUDECODE stays unset, because Claude
reads it as a signal that it is running nested inside itself. Both the tmux
session and the attach client read this one registry entry, so they cannot
disagree.
PR #3 introduced the unset in February, citing xterm.js#484 for the claim
that xterm.js mishandles truecolor. xterm.js closed that issue in April 2019,
Codeman now depends on @xterm/xterm 6, and TmuxManager already sets
terminal-overrides ",*:Tc" on its own tmux server, so 24-bit color reaches
the browser today for every CLI that asks for it.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Each item is from the pre-merge review of the PR it names, applied on master
rather than by pushing to a contributor branch.
#400 (response viewer, shenlvkang-collab)
- The brief view opened at `scrollTop = 0`, right when it was a single card
holding the last row. Now that it renders the whole turn, the top is the
turn's first narration line and the answer can be screens below it, while
loadFullContext already scrolls to the bottom of the same turn. A multi-row
turn now opens at its newest text; a single card still opens at the top.
#401 (loopback links as web tabs, shenlvkang-collab)
- Drop `*.localhost` from the auto-route set. Every other member is an address
literal that can only mean this box; a `*.localhost` DNS name is not one, and
a resolver with a search domain retries `evil.localhost` as
`evil.localhost.<search domain>`. The link source is agent-written terminal
output, so that set is the whole confinement on a tap that makes Codeman
fetch a URL server-side and persist it. The page-side test stays broader
(`isOnBoxHostname`), where a false positive only declines to proxy.
- A link to the origin root navigated nothing: the path was flattened to '',
which openWebview reads as "no deep link", leaving an open frame where it was.
- `this.webviews` being set does not mean it is loaded. initWebviews() assigns a
truthy empty map and only then awaits the list, so a tap during page load
found nothing to reuse and POSTed a duplicate record. Join the in-flight
refresh instead.
- One dashboard per dev server rather than per host spelling, which is what the
method's own comment already promised.
- Toast on the auto-create: it writes webviews.json, broadcasts over SSE and
adds a Run-dropdown row on every signed-in device, with a new tab as its only
previous signal.
#362 (remote omp continuation, timkjr)
- Accept the allowlisted `mode === 'omp'` arm as-is; a blanket registry render
would hand deepseek a locally-resolved --profile and bypass claude's own
overlay. A registry-declared switch is the follow-up if a third mode needs it.
- Revert the whole-file Prettier reformat of docs/remote-sessions.md (docs/ is
hand-formatted and outside `npm run format`), keeping only the two new
sections.
- Correct three stale passages: architecture-invariants' `exec claude
--dangerously-skip-permissions`, the `exec <cli>` paragraph (claude and omp
now have their own arms, and the claude pane's PID is the login shell), and
omp-integration's `-c 'omp'`. RemoteCommandMode gains deepseek and omp.
- Add the missing `_maybeCaptureOmpSessionId` remote-guard test; the sibling
guard in `_pinOmpRespawnId` had one and this path runs earlier, on the first
idle turn.
#388 (keyCode 229 recovery, aakhter)
- Gate notifyCanonicalData on shouldSuppressTerminalQueryResponse and
isTerminalFocusOrMouseReport. onData also carries the DA/DSR/CPR/OSC replies
xterm answers during Ink redraws and its SGR mouse and focus reports; any of
those landing between the keydown and the candidate's resolution was read as
"xterm spoke for this keystroke", standing the recovery down and leaving the
character dropped, worst on a busy agent pane. Reached through
window.CodemanTerminalInput: the predicates live in a module IIFE that closes
long before this call site, so bare references would throw into the
surrounding try/catch and stop the notify from ever running.
Every fix has a test that fails without it (verified by reverting each).
Full gate green on the combined tree: 358 files, 6849 tests.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The eye button rendered `data.text`, which is one row: the last assistant
row of the transcript. A Claude answer is a median of 3 model messages
(p90 11) split around tool calls, so the brief view usually showed the tail
of an answer ("Done.", "Let me look.") and the substance appeared only after
More. The full view was fine, which is why the brief one read as broken by
comparison.
The brief view now asks `?context=turn`. The reader answers with the
assistant messages of the last ANSWERED turn (`selectLastAnsweredTurn`: the
highest `turn` that has an assistant row, so a prompt queued after the
answer does not blank the view) and the frontend renders them exactly as
the full view renders that turn: one badge, then continuation segments,
gated on the numeric `turn` as before.
`data.text` is unchanged in every context — still the last assistant row,
never `messages.at(-1)` — because agent pollers hash it. Readers that emit
no turns (Codex, the pane parser, DeepSeek, an older server) return `text`
only for `context=turn`, and the brief view keeps its single card for them.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01McLWqCWBuQYGuPMScb4Aou
Review of the previous commit found the guard inverted: the three skips keyed
on `?full=1`, which is only what the client asked for. When the capture comes
back null — ENOBUFS, a timeout, a vanished pane, or a session with no mux at
all — the reply falls back to the byte history, which IS a stream of
successive frames and still needs stripping. Gating on the request returned it
whole: measured at 82KB against 4KB for the same buffer without `full=1`. A
direct-PTY session takes that path on every first selection, not only during
an outage. The skips now key on `isFullCapture`, meaning a capture arrived.
Three further defects the same review surfaced, all on this path:
Keeping the trailing rows is only sound when a cursor move follows to count
back up from them. On the two branches where the cursor query fails there is
no move, so the caret was left at the bottom of the pane — worse than before.
The cursor is now read first and settles both decisions together.
The move is relative rather than absolute. `CUP` numbers rows from the top of
the browser's screen, so it is only right while the browser's row count equals
the pane's, and `resizeWindow` does not wait for tmux, so a capture can be
taken before a requested resize applies. Measured against real tmux with a
browser four rows shorter than the pane: the absolute move lands on a blank
row, the relative one lands on the caret's row.
An all-blank pane no longer reads as content. Retaining trailing rows and
appending a move made it non-empty, and the caller treats non-empty as "replay
this", so a blank screen would have replaced real history — the downgrade
`_replayWouldShrinkBuffer` refuses, arriving from the server side where that
guard cannot see it.
The documentation claimed one line per screen row. `-J` joins a hard-wrapped
row into its logical line, so that is false whenever any row wrapped: measured
at 10 lines for a 12-row pane. Both entries now say what actually holds, and
the stale "NOT repositioned" contract in the mux interface is updated too.
Tests: the byte-history fallback is stripped, an empty capture leaves history
intact, and the extracted helpers are unit-tested directly rather than through
source-text matching. The slice window in the capture test is bounded at the
next method, having overrun into its neighbours.
Switching to a session left the caret one row below the composer's input
line, on the box border, and every cursor-relative update the CLI sent
afterwards was measured from the wrong row. Any fresh output repaired it,
because the CLI then repainted the whole frame.
Two things were wrong with the full-history replay, and they compound.
The capture never restored the cursor. The visible-frame path ends with an
absolute cursor move back to the pane's position; the linear path returned
its text and left the caret wherever the last character landed, which for an
agent CLI is the bottom-most row carrying text — the status line.
The rows it addressed did not line up with the pane's rows either. Four
transforms ran over the capture and each can delete a line: the trailing
blank rows were stripped, redraw-bloat stripping ran, the trim that cuts
everything above the Claude banner ran, and leading whitespace was removed.
All four are right for a byte stream of successive frames. A capture is the
rendered pane, one line per screen row, so each deletion shifted the frame
out from under the restored cursor.
The full-history path now appends the pane's own cursor position and keeps
every row, so row N of the reply is row N of the pane. The visible-frame and
tail paths are untouched.
Restoring the cursor is what makes row alignment load-bearing here, and
neither CLAUDE.md nor the architecture invariants said so — which is how
four line-deleting transforms accumulated on the path. Both now record it.
Verified against a live 315x59 pane: the reply carries 59 rows, its row 55
is the composer's input line matching tmux, and it ends with the cursor move
that lands there.
Ctrl+V in the terminal inserted the clipboard text twice. Right-click →
Paste inserted it once.
`_handleImagePaste()` appends a hidden contenteditable div, focuses it, and
reads the clipboard out of the paste event that lands there. Two separate
routes deliver that event for a single keypress. The function issues
`document.execCommand('paste')` itself, which in Firefox dispatches a
trusted paste event and then returns false, because the trap cancels the
event and the command never completes; Chromium and WebKit refuse that
command and dispatch nothing. The keydown's own default action delivers the
other, because xterm calls the custom key handler before its own `cancel()`,
so returning false never calls preventDefault. Firefox therefore ran the
trap's listener twice and both runs reached `terminal.paste()`. The
context-menu paste involves no keydown at all, which is why that path stayed
correct.
The trap now accepts the first paste event and cancels every later one, so
how many paste events a browser delivers no longer changes what the PTY
sees. Measured on a live install, one Ctrl+V each: Firefox two events and
two writes before this change, Chromium and WebKit one and one, and every
engine one write after it.
The `execCommand('paste')` call stays. Stripping it out also ends the
doubling, and all three engines still deliver one event without it, since
`trap.focus()` has already run when the key's default action resolves. It is
kept because the trap technique arrived in #84 for plain HTTP and for
mobile, and a desktop measurement says nothing about real iOS Safari or
Android Chrome: where a browser aims the default action at the element
focused when the keydown began, the command is the only route into the trap,
and the trap is the only place clipboard image blobs are read.
test/image-paste-trap.test.ts loads image-input.js into a `node:vm` context
with a fake document and fires two paste events at the trap. It covers text
and images, and fails on the old code with the text pasted twice and the
image uploaded twice.
Docs: the invariant goes into docs/architecture-invariants.md as a Terminal
paste section and into CLAUDE.md as a Frontend entry, both recording the
measured event counts and why the redundant call is still there. README.md
and the Keyboard Shortcuts and Input and Voice wiki pages gain a Ctrl+V row,
which all three tables were missing while listing every other clipboard
binding.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
#386 made Codex conversations resumable from Past Sessions, and
resumeMobileOverviewSession() correctly passes row.resumeId on to
resumeHistorySession(). The phone's own row projection never copied the
field off the unified-list item though, so row.resumeId was always
undefined there and a tapped Codex row started a FRESH session on a thread
that was already on disk. The desktop path worked; only the phone was blind.
The test fails without the projection line, and pins the other half too: a
claude row must not grow a resumeId, since the field is what distinguishes
"resume this conversation" from "start a new one".
Docs: CLAUDE.md and architecture-invariants both still described the unified
list as merging Claude transcript files. It has been three stores since this
PR (Claude's ~/.claude/projects, omp's ~/.omp/agent/sessions, codex's
~/.codex/sessions), the alias field keeps its Claude-era name without being
Claude-only, and the scanner-only rule behind resumeId was written down
nowhere.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
#385 made the composer glyph and the working status line per-CLI registry
data, which is right, but `workingLine` arrived as a config-supplied regex
validated with a bare `new RegExp()`. That skips `compileVersionRegex()`,
the helper the registry uses for exactly this: a `~/.codeman/clis.json`
override can set the field, the compiled pattern is run against every
accumulated PTY chunk and every pane capture, and a nested quantifier there
backtracks on the event loop for the whole server rather than one session.
Route it through the helper in both places, which are not redundant: the
schema refine rejects the entry at LOAD time so a bad pattern never reaches
a session, and `_workingLinePattern()` compiles through the same helper so
the runtime cannot hold a pattern the schema would have refused. The helper
returns null instead of throwing, so the Claude-pattern fallback stops being
a try/catch and becomes structural. Both shipped patterns compile unchanged,
and Claude's is behaviourally identical to CLAUDE_WORKING_LINE_PATTERN.
Also match the Codex footer case-insensitively on the E. It was
characterised against codex-cli 0.152.1, which prints a lowercase `esc`;
a version capitalising it would make the whole fix silently inert, since
the pane would simply never look like it was working.
Docs: CLAUDE.md, architecture-invariants and cli-registry.md all still
stated the Claude-mode-only rule this PR retires, and none of them named
the new capability or the regex guard.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The two merge-time edits the #383 review asked for. The comment above the
picker's fallback chain said Home is nested under Codeman Cases; on the
native default it is the other way round (~/codeman-cases sits inside ~).
And the "Filesystem path picker" paragraph in architecture-invariants still
said the picker falls back to /mnt/d, which #383 changed to: the session's
Current Folder, then the Codeman Cases root, then /mnt/d, then the first
root. No code behaviour changes.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Review follow-ups to #357. Each is a path that still touched, or still hid, a
container Codeman does not own.
**Export still mutated it.** The four fail-closed layers cover create/start/
stop/remove, but `POST /api/docker-cases/:name/export` reaches the container
twice through neither: a full export `docker commit`s it, and even a
workspace-only export `docker pause`s it first for snapshot consistency. Pause
freezes the owner's processes for as long as the tar takes, on a container we
promised not to touch. Full export is refused for an adopted case (it packages
someone else's container, with their logins, into a bundle Codeman hands out);
workspace-only keeps working and no longer pauses, accepting a live filesystem
the way `tar` does on any running host directory.
**A freshly linked OWNED case became unusable.** The run menu now probes the
container for its CLIs, and a failed probe hides every agent mode behind the
reason. For an adopted case that is right. For an owned one the container does
not exist until the first session launches it, so every newly linked Docker case
answered `container "codeman-case-x" not found (adoption never creates a
container — start it yourself first)` and offered nothing but Shell, for a
container the launch chain was about to create itself. A failed probe is
recorded only when the case is adopted; `CaseInfo.docker.owned` is on the wire
so the frontend can tell them apart. Verified in a browser: owned-with-no-
container offers all ten modes and no notice, adopted-but-stopped offers Shell
and says why.
**Multi-user gating.** Adoption is admin-only, unlike `docker-link` beside it.
Linking creates OUR container, whose sole bind mount `isWorkingDirAllowed` has
already confined to the caller's space; an adopted container's mounts are
whatever its owner gave it, so one mounting `/` hands the adopter a shell over
the whole host — exactly the workspace scoping multi-user mode exists to
enforce. Listing the engine's containers and browsing directories inside an
arbitrary one are machine-level reads and follow the docker-HOST policy for the
same reason. The preflight is deliberately not admin-only: the run menu fires it
for every docker case, so it admits a non-admin for a container already linked
to a case they can access, and nothing else.
Verified end to end against a real pre-existing root container (alpine + tmux,
no bind mounts): adopt, claude session inside it, workspace export, session
close and case unlink all left `StartedAt`, `RestartCount`, `Pid` and `Paused`
untouched; the pane ran the CONTAINER's claude, without
`--dangerously-skip-permissions`; a stopped container was refused at both
preflight and launch and was never started.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01TecFD9hvPYJ1mkkMtBQbT1
Which conversation a pane is on was re-derived by correlating
~/.claude/history.jsonl against Session.lastSubmitAt — and lastSubmitAt is
bumped only by input that flows through Codeman's own write path
(Session.write / writeViaMux). A user who attaches to the pane's tmux session
directly never set it, so resolveActiveClaudeSessionIdFromHistory() returned at
its first line for that pane's whole life and the response viewer stayed pinned
to the launch conversation, showing a pre-/clear transcript indefinitely.
A UserPromptSubmit hook reports the live conversation id from inside the CLI
process, delivered under the pane's own $CODEMAN_SESSION_ID. That binding is a
fact rather than a correlation: it never consults workingDir, so it cannot be
claimed by a sibling pane on the same folder, a closed tab, or a bare `claude`
in the user's terminal. A pane holding such an id skips the correlation
entirely, so the number of prompts eligible for cwd-based guessing goes DOWN,
never up — the naive alternative (relax the guard, or synthesize an anchor from
PTY activity) is the reverted bug the resolver's own comment describes.
The hook also stamps lastSubmitAt, so it finally means "a prompt was submitted"
rather than "typed into Codeman's web terminal". Conversations vouched for
first-hand — and only those — extend a persisted claudeSessionChain, whose tail
re-pins the conversation when a surviving tmux session is re-attached after a
restart. ⚠️ start() resets the id at THREE points and the last one runs
unconditionally after the mux branch, so the tail is applied there too; patching
only the mux branch looks right and silently does nothing.
⚠️ The hook's stdout is discarded with curl's own -o /dev/null. Claude Code
injects a UserPromptSubmit hook's stdout into the model's context ("Exit code 0
- stdout shown to Claude"), and a trailing >/dev/null does NOT work: curlCmd
already ends `... 2>/dev/null || true`, and in `pipeline || true >/dev/null` the
shell binds the redirection to `true`, which never runs on the success path. The
discard is opt-in so the five SSE-fed events keep byte-identical command text
and no workspace's settings file is rewritten for them. The staleness marker is
quote-free for the matching reason: hooksJson is JSON.stringify'd, so a quoted
needle never matches and the gate would rewrite every workspace on every spawn.
Existing workspaces heal on their next Claude spawn through the staleness sweep.
The Claude reader concatenated every assistant row between two human prompts
into one card, fusing up to 74 distinct model messages into a single card, and
it never read the attachment rows that hold a prompt typed while the agent was
working. Measured over 57 real transcripts on 2026-09-01, the viewer shows
1,806 messages instead of 356 and 353 user cards instead of 178, with the
assistant text sequence unchanged row for row and the response without
?context=full byte-identical on all 57 files.
One assistant row IS one whole model message: in that corpus no assistant row
carries more than one content block and no message id carries more than one
text block, so there was nothing to reassemble. Each row becomes its own
message carrying an additive {kind, label, turn}, and the frontend renders a
same-role run inside one turn as badge-less continuation segments — which is
what keeps a p90 of 11 messages per turn from reading as card spam. A numeric
turn gates that rendering, so Codex, the external-CLI pane parser and an older
server keep one badge per card.
A prompt typed while Claude is working is recorded ONLY as an
attachment/queued_command row. Taking it when origin.kind is 'human' and
commandMode is 'prompt' recovers 162 user cards from 163 such rows — one is a
verbatim repeat inside an unanswered user run and is collapsed by the existing
dedup guard — and restores the turn boundary whose absence let the assistant
runs fuse. The CLI's own queue entries are cleanly separable: of 322
queued_command rows, 159 are commandMode 'task-notification' and not one of
them carries an origin key.
This narrows #169 rather than reverting it: sidechain exclusion, the
restored-<uuid8> rebind, replayed-snapshot dedup and synthetic-row filtering
are all unchanged and still asserted.
Small cleanup items from upstream review (Ark0N/Codeman#353):
- OMP_SEARCH_DIRS now leads with ~/.local/bin, matching omp.sh's real
installer target (~/.omp/bin was an earlier unverified guess, confirmed
wrong against a real --no-cache Docker build).
- docs/omp-integration.md: fixed the dead GitHub URL (can1357/omp ->
can1357/oh-my-pi), corrected the CLI count (ninth backend, tenth
SessionMode incl. shell -- not eighth), matched the install-path guidance
to the resolver fix, updated the version example to the actually-tested
18.0.8, and added a Docker-section caveat: --resume pinning does not
currently reach an in-container omp process, since Docker panes never see
ompConfig.
- docs/architecture-invariants.md: fixed a heading missing ", OMP" (CLAUDE.md
already linked to the -omp anchor, so the link was dead) and added an OMP
specifics paragraph -- the one external CLI missing an entry in this doc.
- .changeset/omp-backend.md: corrected the sibling-CLI list (was missing Pi,
Grok, and DeepSeek Harness) and the backend count.
- Removed a stray orphaned comment fragment in the quick-start docker branch
and split two CSS lines that had two declarations jammed onto one line.
Fifteen review findings on the dsh mode, the serious ones first:
- Multi-user: DEEPSEEK_BASE_URL joins the owner-clamped env keys.
_configureDeepSeek() forwards the SERVER's own DEEPSEEK_API_KEY into
every dsh pane and applyEnvOverrides() lands after it, so a non-granted
owner who could redirect the base URL would have the operator's key sent
as a bearer credential to a host of their choosing.
- Wait registry: until=stop/blocked is refused on docker and remote-SSH
dsh sessions (new deepSeekBridgeUnreachable fact in sessionHookOptions).
The HERDR triple is set via LOCAL tmux setenv, which crosses neither
docker exec nor ssh, so such a session can never post a hook event and
the wait burned its whole timeout on every turn.
- Approvals: a dsh item is an ALERT, not an answerable card. The answer
route refuses (the '1'/Esc keystrokes are Claude-dialog-shaped and the
option parser cannot read a third-party TUI's frames, so an answer was a
blind keystroke into a foreign composer), and the push notification
carries no Approve/Deny actions for dsh sessions.
- Status shim (v3): --seq is forwarded and the server drops stale retried
reports inside a 60s window (the TUI retries with backoff, so a retried
'working' could land after 'blocked' and resolve an approval whose
dialog was still on screen); 4xx responses exit 0 instead of retrying,
so one misconfigured session cannot feed the auth rate-limit bucket
until the hook endpoint 429s for the whole instance.
- Web-UI server: concurrent starts are serialized through a lock (two
racing POSTs used to pick the same port and orphan the winner), and the
readiness poll / timeout paths only clear or stop the singleton while it
is still theirs. First click actually opens the tab now
(refreshWebviews, not the nonexistent loadWebviews). DELETE
/api/deepseek/web requires the privileged grant in multi-user mode.
- Cron: deepseek jobs run the same two-part launch gate as the HTTP
create paths (impl moved into the resolver so all three share it) and no
longer stamp a Claude default model on the session.
- Parity sweeps: quick-start's docker branch rejects deepSeekConfig like
the remote branch; the Ralph auto-enable list gained deepseek;
HookEventType gained agent_working; the phone overview run menu filters
managed webview records like the desktop menu.
- install.sh: the dsh identity probe closes stdin (under curl|bash a
child that reads stdin eats the rest of the script), bounds the exec
with timeout where available, and is memoized to one scan per install.
- Welcome screen: .welcome-btn-deepseek styled in the #4d6bfe brand
identity (it rendered as an unstyled UA-grey button); stale markup
comment about the web shortcut rewritten; clamp docs updated.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The agent skill could spawn a worker in any mode, but it could only
DRIVE a claude one: every other CLI has neither a real end-of-turn
signal nor an answer to read, so the recipes route them through output
markers.
dsh has both halves now -- its harness reports idle/working/blocked to
Codeman, and the previous commit reads its transcript -- so it joins
claude as a mode the four verbs work on unchanged. `spawn_workers alpha
beta:deepseek` is a mixed fleet in one call, and `sendwait` / `last_text`
/ `delete_session` need no per-mode variant.
Preamble 1.20.0 (SKILL.md's §0 heredoc regenerated from it):
- `spawn_worker` grows a deepseek branch that gates on the harness
composer. ⚠️ Readiness there is NOT the stop signal: the harness
reports idle at BOOT ~300 ms before its composer paints (measured
2.26 s vs 2.56 s after spawn), so a send-and-wait fired straight after
quick-start resolves on the boot edge, reports a turn that never ran,
and strands the prompt in a pane not yet taking input. Waiting for the
composer also spends that edge, since signals are edge-triggered.
- `spawn_workers` takes `name[:mode]`, so a mixed fleet stays one
concurrent call. Case names still have to be unique -- the mode never
disambiguates two workers that would share a directory.
- `sendwait` asks for `wait:"stop,exit"` instead of the `wait:true`
default set. That set also carries `idle`, which for an external CLI is
inferred from output stabilization: on a dsh worker whose TUI repaints
rarely, the re-wait resolved in 0 ms with `signal:"idle"` on a turn
with three minutes left to run. It also makes a wrong mode loud -- the
modes that cannot deliver `stop` answer 400 before writing anything,
instead of resolving on a flap.
- The self-heal resend carries `delivered:true` forward. The resend is a
tagged duplicate, so the server truthfully reports `delivered:false`
about a write it skipped, and §1's cleanup then read a completed turn
as an undelivered one and kept a finished worker forever.
- dsh workers spawn with the permission posture the Run button sends,
because the harness default still asks and a worker parked on an
approval row cannot finish a fan-out. The multi-user clamp still
applies.
Docs: a worked dsh flow in recipes.md, readiness and the signal rules in
verbs.md, and the corrections this makes necessary -- `stop`/`blocked`
are no longer claude-only, and `last-response` is no longer permanently
empty for deepseek. The integration guide gains a section on reading a
session back and driving one as a worker; its web-UI section was also
stale (that server moved out of a shell session).
The static guard that keeps those lists from naming some external CLIs but
not others is extended rather than exempted: it now knows the three real
classes inside that family (no transcript, no hook signals, and the
positive twin -- the modes whose answers can be read), with the hook class
derived from `hooksAvailableForMode()` so the predicate and the prose
cannot drift apart. Any other partial list still fails, and a new backend
belongs to none of the classes until someone says so.
The three smaller review nits, plus the first real test coverage for the status
shim (it had none: it is emitted as a STRING, so tsc never sees it).
1. The shim was written with a plain writeFileSync. The TUI can be exec'ing that
exact path while an upgraded Codeman refreshes it, and a reader catching a
half-written file gets a syntax error, exits non-zero, and is retried four
times per state change for a file that will never parse. Now temp + rename
(atomic within the directory), with the temp chmod'ed before the rename since
writeFileSync's mode only applies on create, and removed if the write throws.
SHIM_VERSION bumped to 2, because SHIM_SOURCE changed and an existing v1 shim
would otherwise keep matching the embedded marker and never be refreshed.
2. The pane-id comment claimed the ambient env "cannot be spoofed by an argument
the agent itself could influence". The agent runs IN that pane and can invoke
the shim with CODEMAN_SESSION_ID unset and any argv it likes. It buys nothing
it did not already have (the hook-secret file is readable from the same pane,
so it can POST /api/hook-event directly), but the comment read like a security
boundary. Rewritten to say what the preference actually buys: correct
attribution when a TUI mangles or re-uses the pane argument. Accidents, not
adversaries.
3. classifyProfile() folded the directory name into the same haystack as the
bundles, but only the TUI arm could match a bare name, so a stock profile
whose package.json has no dsh.profile.bundles (hand-edited, older layout,
mid-install) classified as `unknown` -> launchable -> eligible as the DEFAULT
pick, which is exactly the pane-dies-on-arrival failure the two-part
availability gate exists to prevent. The stock names are now a LAST-resort
fallback consulted after the bundle patterns, so real bundle evidence still
wins over a name the user chose. The loose `tui` arm gained word boundaries:
it decides which profile boots by default, and matching the middle of
`intuition` is not a rule anyone could predict.
New test/deepseek-status-shim.test.ts runs the generated script the way the
harness does -- real node process, real argv, real env, real listener -- and
covers the exit-code contract that makes the retry behaviour safe: mapped states
post and exit 0, an unknown verb or unmapped state exits 0 WITHOUT posting (a
non-zero there would be four HTTP requests per state change forever), a rejecting
server or an unreachable one exits non-zero so the caller retries, the hook secret
is read at execution time, and `node --check` parses the file (a template-literal
typo in SHIM_SOURCE is invisible to tsc).
Trap worth recording, hit while writing it: the tests must spawn the shim
ASYNCHRONOUSLY. The listener lives in the test process, so spawnSync blocks the
event loop that has to accept the connection, the shim waits out its own 1500ms
socket timeout and exits 1, and it reads exactly like a broken shim (measured:
Socket._onTimeout in its --trace-exit output, server logging nothing).
Verified: full gate green (6142 passed, +10), typecheck/lint/format clean.
Three review findings on the DeepSeek Harness mode, plus one the third exposed.
1. The multi-user clamp was bypassable by a sibling field on the same request.
clampExternalCliBypassForOwner() clamps deepSeekConfig.permissionMode, but
DSH_* is an allowlisted envOverrides prefix and applyEnvOverrides() runs AFTER
_configureDeepSeek(), so a non-granted owner sending
envOverrides.DSH_PERMISSION_MODE landed last and won. Measured on an isolated
instance: a session created with permissionMode "read-only" and that override
ran with DSH_PERMISSION_MODE=danger-full-access in its pane.
Every other CLI's bypass is a command-line flag reachable only through the
per-CLI config, which is why the config clamp alone is the whole gate for
them. clampEnvOverridesForOwner() adds the env-var half: for a non-granted
owner it DROPS DSH_PERMISSION_MODE and DSH_HOME (dropping falls through to
what _configureDeepSeek() exports, i.e. the clamped value). DSH_HOME is on
that list because it aims the launcher at a profile tree whose plugin code
runs at boot, before any approval row can apply. Verified end to end in real
multi-user mode: a non-granted user sending both now gets workspace-write and
no DSH_HOME, while an unrelated DSH_TELEMETRY_MODE passes through untouched.
2. POST /api/deepseek/install-profile could hang forever. spawn's own `timeout`
signals only the direct child, and a plugin install fans out into
package-manager children that keep the inherited stdio pipes open, so `close`
never fires and the held-open request leaks with no route-level deadline.
Reproduced: with a 1.5s built-in timeout the promise was still unsettled after
6s and both fan-out children were alive. Now detached: true plus negative-pid
SIGTERM/SIGKILL, the same escalation runGit() uses for the same reason, with a
last-resort reap for a grandchild that escaped the group. Same probe after the
change: close fires, direct child and both grandchildren dead.
3. hooksAvailableForMode() promised more than a dsh session can deliver.
deepSeekConfig.statusReporting: false disarms the HERDR_* export, and that
triple is the only reason a dsh session posts hook events, so `until=stop` was
accepted and then blocked for the caller's whole timeout: the exact
infinite-wait-dressed-as-a-timeout the predicate exists to prevent. It now
takes HookCapabilityOptions and every call site passes sessionHookOptions(),
with the deepseek arm reading `!== false` so a forgotten one degrades to the
old behaviour. The refusal names the setting rather than saying "no Claude
Code hooks", which would send the caller hunting a bug that is really a
setting they chose. Profile conformance stays unknowable at request time and
is documented as such. The stale "True for `claude` and nothing else" docblock
is corrected.
4. Exposed by (3): hooksAvailableForMode() was doing double duty as "is this a
claude session". Read My Mind (POST /api/sessions/:id/readmymind) and intent
capture read Claude's own transcript, and adding deepseek silently widened
both to a mode that has none. They compare mode === 'claude' directly now, and
a static check pins them there.
Verified: full CI gate green (6132 passed), typecheck/lint/format clean, and the
wait-signal gating exercised against a live server with a real dsh 0.1.1-rc.2 --
bridge off plus explicit until=stop is a 400 naming the setting, bridge off with
no `until` still 200s on idle/exit, bridge on accepts stop.
Adds `mode: 'deepseek'` alongside claude/shell/opencode/codex/gemini/
antigravity/pi/grok, plus a shortcut that opens the harness's own browser UI
as a Codeman web tab.
DeepSeek is wired unlike its siblings in three ways, each of which is the
reason for a design decision rather than an accident:
1. The agent is a PROFILE, not the binary. `dsh` is a launcher over
$DSH_HOME/profiles/<name>, and DeepSeek ships only `web`, `headless` and
`base` -- the interactive terminal front door is always a third-party
plugin. So availability is two questions: `isDeepSeekAvailable()` (binary)
and `isDeepSeekRunnable()` (binary AND a pane-capable profile). The Run
button gates on the latter, because reporting only the binary would spawn a
pane that dies on arrival. When the binary is present but no profile is,
the run menu offers to install one (POST /api/deepseek/install-profile).
2. The permission switch is an env var, not a flag. The harness has no
command-line permission option; its sandbox/approval rows read
DSH_PERMISSION_MODE (read-only / workspace-write / danger-full-access).
Exported via `tmux setenv`, never on the spawn line. Absent = the harness's
own workspace-write, which still asks, so the multi-user clamp is the
only-if-sent branch and clamps to workspace-write, never read-only.
3. It is the only non-claude mode that passes hooksAvailableForMode(), and it
earned that. The terminal front door reports idle/working/blocked to a
supervising process over a generic env-gated contract; a generated shim
(deepseek-status-shim.ts) makes Codeman that supervisor and forwards each
report to /api/hook-event as stop / agent_working / permission_prompt. So a
dsh session gets definitive respawn triggers, real wait-endpoint signals and
real Approvals Inbox items instead of output-stabilization guesswork.
`agent_working` is new (157th SSE constant) and joins
APPROVAL_RESOLVING_EVENTS so a dialog answered in the terminal clears its
alert at once.
The resolver needs the strictest identity probe of the family: `dsh` is not
merely a squattable npm name, Debian ships an unrelated `dsh` (dancer's shell),
so `dsh --help` must print the harness's own banner before a candidate is
handed a spawn line.
Model is deliberately not a session field -- it is a composition entry in the
profile's config tree. Env allowlist gains DSH_* and DEEPSEEK_* only; provider
keys named by a settings-file `apiKeyEnv` stay out, which is pi's
34-provider-key problem in a new shape.
Verified live against dsh 0.1.1-rc.2 and @deepseek-harness-tui/dsh-tui: the
status endpoint's two-part answer, the no-profile refusal, the profile
bootstrap, a real session whose pane runs `dsh --profile dsh-tui` with the
permission mode injected via setenv, and the full status bridge -- a
send-and-wait returned signal "stop" from a real turn, and blocked/working
created and cleared an Approvals Inbox item.
Docs: docs/deepseek-integration.md (guide), docs/deepseek-integration-plan.md
(decisions + honest gaps). Tests: test/deepseek-mode.test.ts,
test/deepseek-cli-resolver.test.ts.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The agent skill's endpoints.md is what other agents read as ground truth, and
three of its facts went stale when grok landed:
- `/api/v1/grok/status` was added to the probe list, but the sentence after it
still said only Pi's response carries `.data.version`. Grok's carries it for
the same reason (a squatted binary name), and an agent that trusts the old
wording has no way to tell a misresolved grok from an absent one.
- the `active-tools` bullet listed grok among the modes it stays empty for, then
claimed in the same breath that `isExternalCliMode` "lists only those five".
- its three source line refs had all drifted: `isExternalCliMode` is now
session.ts:174-183 (it was already wrong before this branch), the external-CLI
early return is session.ts:2261, and TEXT_COMMAND_PATTERN is
bash-tool-parser.ts:89.
CLAUDE.md and architecture-invariants.md counted modes in their Docker-cases and
Web-tabs paragraphs ("any of the five CLI backends", "never a sixth
SessionMode"). Both numbers were already stale before grok (antigravity and pi
had made it seven) and grok is now in the agent image, so the counts are gone
rather than incremented: the invariant those sentences carry is that Docker and
web tabs are not modes at all, which no number has ever helped state. The two
plan docs keep their original wording, being historical design records.
SessionMode gains 'grok', a first-class backend alongside Claude Code,
shell, OpenCode, Codex, Gemini, Antigravity and Pi: its own PTY, tmux
session, charcoal tab identity ('gk' badge), welcome button, run-mode
entry, cron agentType, Docker and remote-SSH command defaults, and
clone-repo Brain option. Flag surface verified live against grok 1.0.5.
Grok mixes two existing shapes and the wiring follows from that:
- Codex-shaped on permissions: the bypass switch is GrokConfig.alwaysApprove
(--always-approve, grok's bypassPermissions mode; config-level deny rules
still apply on top). The Run button sends it true, like runAntigravity(),
and clampExternalCliBypassForOwner() puts grok in the only-if-sent branch:
a bare grok spawn is grok's own ask-mode default, which is already safe,
so only a sent config needs the flag forced off. Cron needs nothing for
the same reason.
- OpenCode-shaped on rendering: grok is a fullscreen alternate-screen TUI
with mouse support, so it stays OUT of isAltScreenStripMode() and lands
on the narrow tmux-attach strip and the 'buffer' local-echo fallthrough
(unmeasured against an authenticated composer; documented fallback is the
'off' branch).
- Pi-shaped on resolution: 'grok' has npm squatters (@vibe-kit/grok-cli
also installs a grok bin), so grok-cli-resolver.ts version-probes every
candidate (grok --version, killSignal SIGKILL, VITEST-gated) and
GET /api/grok/status surfaces path AND version; GROK_VERSION_REGEX is
shared with the dependency registry so doctor and run mode cannot drift.
Env allowlist gains GROK_* plus the XAI_* vendor namespace (XAI_API_KEY is
grok's documented headless auth var), the same narrow-vendor reasoning as
GOOGLE_* for gemini. Resume is id-regexed on purpose: grok's own --resume
also matches session titles, which are arbitrary user strings that must
never reach the bash -c spawn line.
Docker: grok is not on npm, so the agent image installs it in its own step
(xAI's installer has no --dir override; the binary is copied to
/usr/local/bin and root's ~/.grok dropped in the same layer), and
credentials are seeded per-file (auth.json, config.toml, pager.toml; the
dir also holds sessions/, memory/ and the ~160MB binary). Remote SSH routes
through the login-shell wrapper like the other agent CLIs.
Verified end to end on an isolated CODEMAN_INSTANCE with grok 1.0.5
installed: /api/grok/status resolves and reports the probed version,
quick-start spawns a pane whose command line ends in 'grok
--always-approve', the real TUI renders (OAuth device screen on an
unauthenticated box), and grokConfig round-trips through state.json.
Docs: docs/grok-integration.md (user guide) + docs/grok-integration-plan.md
(decisions, verification record, follow-ups).
Tests: test/grok-mode.test.ts, test/grok-cli-resolver.test.ts, plus
extended clamp/system-routes/render-index-html/run-mode-ui/mobile-overview/
local-echo-gating coverage. npm test (the CI gate) green: 5910 tests.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
CLAUDE.md gained "any new `tmux -L` caller through `resolveTmuxSocketName()`"
but architecture-invariants.md, which that bullet points at for the
mechanism, still described only the dataPath() half. Say why the rule
exists there too: the TUI is the first non-server process to shell out
to tmux.
#325 renamed _sessionUsesServerMouseStrip to _shouldReportMouseToCli and
added the server-observed cliMouseTracking half of the gate, which also
turned codex tap reports from measured no-ops into not-sent-at-all. The
invariants paragraph still described the old name and the old behavior.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Found while verifying Auto Copy in a browser: a plain left click in a
claude/codex/gemini pane sent a synthetic SGR mouse report into the PTY
whether or not the program in that pane had ever enabled mouse tracking.
When the pane holds a plain shell (the CLI exited, or a shell was started
inside a session of that mode) readline prints the report as literal text
and it garbles the next line typed:
$ [<0;88;20Mecho hello
bash: 0: No such file or directory
The cause is that the browser could not know. The full strip
(isAltScreenStripMode) removes the mouse DECSETs from the stream, so
xterm's modes.mouseTrackingMode is permanently 'none' for those modes and
_sendSyntheticSgrTap() hand-encodes reports to stand in for xterm's own
encoder. With no state to consult it had to do that on every click.
What the strip removes, the server now remembers.
_recordStrippedMouseMode() records each sequence as it is stripped,
toState() publishes it as cliMouseTracking, and the browser's
_shouldReportMouseToCli() (renamed from _sessionUsesServerMouseStrip)
requires it at all three report sites: the desktop click, the touchend
tap, and the mobile tap classifier.
Details that are easy to get wrong:
* Only the tracking modes count (1000/1001/1002/1003). 1005/1006 select
an encoding and 1007 is alt-scroll; a CLI that picks SGR encoding
without turning tracking on is not asking about clicks, and counting
those would put the stray reports straight back.
* Modes are held in a Set, so a TUI disabling a mode it never enabled
cannot clear the ones that are really on.
* The change broadcasts immediately instead of through
broadcastSessionStateDebounced: the flag flips when a dialog opens, and
the user can click that dialog well inside the 500ms debounce window.
* It fails toward silence. After a server restart the flag is false until
the CLI re-emits its DECSET, which tmux does at client attach.
Verified against a live claude 2.x session: the CLI holds a tracking mode
on continuously, so its clicks are still reported byte for byte as
before, while a bash prompt in the same stripped mode now reports
nothing and types cleanly. The flag also propagates live over SSE in both
directions, checked by toggling ?1002h/?1002l from inside the pane.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
App Settings > Terminal & Input > Selection & clipboard > Auto Copy
Selection (`autoCopySelection`, per-device, default OFF). With it on,
highlighting text in the terminal copies it: mouse drag, double-click
word, triple-click line, and the phone long-press selection. Ctrl+C is
untouched and still copies on demand.
Three things decide the shape of it:
* It fires at the END of a gesture, never in onSelectionChange. That
callback runs for every cell a drag crosses, so copying there would be
one clipboard write per mouse move. It only arms a pending flag; a
document-level mouseup listener flushes, and the touch path calls the
flush itself because it preventDefaults its touchend and no mouseup
ever arrives there.
* The flush is synchronous inside the handler, because both clipboard
paths need user activation: Firefox gates navigator.clipboard
.writeText on it, and execCommand('copy'), the fallback the plain-HTTP
LAN install lands on, has to run in the gesture's own task. A timer or
a wait for onSelectionChange loses it, invisibly in Chrome.
* It deliberately does NOT do what copyTerminalSelection() does. That
one clears the selection (so a second Ctrl+C is an interrupt) and
focuses the terminal. Clearing would make text vanish under the cursor
that just highlighted it, and focusing opens the on-screen keyboard
over it on a phone. Focus is instead restored to whatever held it,
which only matters for the execCommand fallback.
Guards are pure in decideAutoCopy() (constants.js): off, blank or
whitespace-only text, and a 1M-char cap, since a drag off the top of the
viewport autoscrolls and one gesture can sweep the whole 50k-line
scrollback. Past the cap the copy is refused rather than truncated, with
a toast pointing at Ctrl+C.
Feedback is silent on success except once per page load, so a feature
that works by doing nothing visible can still be told from a dead
toggle; failures and refusals toast, throttled to 10s.
Per-device on both counts the settings rule requires: in `displayKeys`
and absent from the .strict() SettingsUpdateSchema, because clipboard
access differs by device and by origin.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Brings in https://github.com/christianhaberl/Codeman/pull/4 (three commits,
authorship preserved) and adapts it across the 211 commits master gained
since the branch was cut:
- App Settings control re-authored for the set-* surface (PR #278): a
set-row in Layout -> Tabs, replacing the old settings-item markup the
branch targeted. i18n description synced.
- Lineage arcs (PR #291, post-branch) are SKIPPED in sidebar layout:
computeLineagePath()'s U-bridge geometry hangs from the horizontal
strip's bottom edge and has no meaning against a vertical list. The
lineage strip-scroll listener now also redraws subagent/ultracode
connectors while the sidebar scrolls vertically.
- The desktop home tab rail (post-branch) defers to the sidebar: both dock
the session list flush left, and the rail would render z-ordered under it.
- Active-row reveal unified into _scrollActiveTabIntoView() (#257 landed on
master after the branch): sidebar mode branches to scrollIntoView
block:'nearest', and _fullRenderSessionTabs() restores scrollTop alongside
the #257 scrollLeft restore so ambient rebuilds cannot yank a mid-scroll
sidebar back to the top.
- Mobile active-tab hoisting the branch guarded against no longer exists on
master (removed by #257); kept master's order-stable render.
Verified: typecheck, lint, format:check, check:frontend-syntax,
check:public-assets, PostCSS parse of both merged stylesheets, the 26 new
jsdom tests, the structural guard suites, and the headless-Chromium harness
(scripts/verify-session-sidebar.mts) green across all seven layout states
at 1600/1000/393px against current master.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
A .json/.log/.yaml/code path outside the session workspace was refused as an
unsupported type, and clicking one in the terminal made it worse: text goes to
the log viewer, which spawns `tail -f` and allows only the workspace, /var/log
and ~/logs, so it answered "Path must be within working directory or allowed
log directories" while the same path clicked in the response viewer previewed
fine. Two surfaces, two answers, for a file the session can already cat.
- TEXT_ATTACHMENT_EXTENSIONS IS EDITABLE_EXTENSIONS (config/file-editing.ts),
not a second curated list that would drift from it. The rule reads: if the
viewer would open a file for editing inside the workspace, the same file
outside it can be read. The suffix was never the confidentiality gate here,
the path guard is (sensitive-file blocklist, /root and /etc trees, realpath
before the check), and it still runs on every registration.
- Widening what can be READ must not widen what can RUN. html/htm join svg in
serveRawFile's download-only branch, so markup is never served with a
renderable type on our own origin; other text goes out as inert
text/plain; charset=utf-8 with nosniff, matching what the path picker does.
The preview reads through fetch(), which ignores the disposition, so a
clicked .html still shows its source.
- ~/.codeman*/state.json joins isSensitivePath. It persists
SessionState.envOverrides and the env allowlist admits key-shaped names
(GEMINI_API_KEY, CLAUDE_CODE_*), so it can hold a live credential. Same
treatment as hook-secret and users.json, and the rest of the tree stays
attachable.
- The terminal sends an out-of-workspace path to the preview instead of the log
viewer. In-workspace text keeps the tail viewer, which is the point of it, and
file-stream-manager's allowlist is untouched: no `tail -f` on arbitrary host
paths.
- The by-id text preview is bounded like the workspace one: a Range request for
the first 512KB (a real partial read, not a discarded 50MB download) plus a
500-line cap, with the footer saying so.
Verified on an isolated instance: a 1.1MB external log opens in ~1.8s showing
500 lines with "showing first 500 lines" in the footer; json, yaml and code
preview; an .html carrying a script tag renders as source and does not execute;
.svg is still refused; a terminal click on an external .yaml opens the preview
with no log viewer and no attachment card; an in-workspace .log still opens the
streaming tail viewer.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
A clip an agent wrote inside the workspace played with a working scrub bar,
while the same file in /tmp was refused as an unsupported type. The workspace
preview classified media with its own inline extension sets and the attachment
allowlist had no media at all, so the two paths disagreed about what a video is.
- VIDEO_ATTACHMENT_EXTENSIONS and AUDIO_ATTACHMENT_EXTENSIONS now live in
attachment-registry.ts and are imported by file-content's classification, so
both paths answer the same. mp4/webm/mov/m4v/ogv and
mp3/wav/ogg/oga/m4a/aac/flac/opus join the attachment allowlist.
- Real MIME types for those extensions. Without one the raw route falls back to
application/octet-stream, which a <video> refuses to decode: the player
renders and then does nothing.
- getAttachmentType() gained the video and audio members of
AttachmentDetectedType. Attachment cards have no per-type CSS and their
thumbnail falls back to the type label, since the thumbnailer has no media
branch and answers 204 rather than spawning a converter.
- The preview overlay's by-id branch renders <video>/<audio> with the same
markup as the workspace branch, playsinline included. Serving was already
range-aware, so seeking works.
The image-watcher keeps its own narrow detection list (png/pdf/docx/pptx), so
this does not start popping cards for every video an agent writes. Text types
that are not md or txt (.json, .log, code files) remain out of the allowlist by
choice and still report what is previewable instead.
Verified on an isolated instance: an external mp4 and mp3 both play, seek, and
report the right duration, matching the in-workspace clip exactly, and a click
on an external mp4 in the terminal opens the player with no attachment card.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
A path an agent prints was already underlined in the terminal, but clicking
one opened the preview overlay on "File not found": file-content/file-raw
resolve against the session workingDir and refuse anything outside it, and the
paths agents print most (a /tmp capture, Claude's own scratchpad, another
checkout) are outside it by definition. In the response viewer those paths were
not links at all.
- openFilePreview() detects an out-of-workspace path and registers it through
POST /api/sessions/:id/attachments first, rendering by attachment id. That is
the surface built for live external files, so the server-side guard is
unchanged: secret trees blocked, symlinks resolved, extension allowlist. The
workspace routes keep refusing escapes exactly as before.
- New optional `notify` field on that route. `notify: false` suppresses only the
attachment:detected broadcast, so a click does not also pop a card announcing
the file already filling the screen. Default stays true for the CLI and
publish callers.
- _linkifyFilePaths() links paths in rendered response-viewer markdown. It walks
text nodes and builds anchors with DOM APIs (the source is model output; never
a string rebuild of sanitized markup), skips subtrees already inside an <a>,
and keeps the message text byte-identical so copy-code is unaffected.
- One path pattern in constants.js now feeds both the xterm link provider and
the chat linkifier, a fresh instance per call since lastIndex is per-object
state. It picks up /Users and /mnt roots (nothing was clickable on macOS or
WSL), plus docx/pptx and video/audio extensions.
- .file-preview-overlay moves to z-index 5100, above the response viewer at
5000. At its old 2000 a path clicked in the chat opened the overlay behind the
panel it was launched from.
Verified end to end on an isolated instance, desktop and phone viewport: real
clicks in the terminal and the chat both render the image, external md and pdf
render, /etc/hosts is still refused, workspace previews unchanged.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The lines that join a tab to the workers its codeman skill spawned were
drawn with numbers tuned against two tabs sitting side by side, and they
degraded in exactly the two situations the feature is actually used in.
1. A spawned worker is appended to the END of the strip, so the real span
between a lead and its worker is 800-1500px. With the dip clamped at
44px that is a 33px sag: the arc reads as a straight line drawn across
the terminal instead of a bracket hanging under the strip. The dip now
grows at 0.085/px and clamps at 104.
2. When the desktop strip wraps (tabs-two-rows / tabs-auto-wrap), a parent
on row 1 and its child on row 2 are ~14px apart, and the cross-row
branch drew parent-bottom to child-TOP: a flat line hidden inside the
row gap, with siblings overprinting each other. Both ends now anchor on
the tab BOTTOM with the control points below the LOWER row, so a wrapped
pair gets the same bracket a flat strip gets. That deletes the branch:
one shape covers both.
Visibility, at 1:1 rather than in a zoomed mockup: 2 -> 2.5px stroke,
4 4 -> 5 5 dashes (lineage-flow moves with them, -16 -> -20), opacity
.55 -> .72, and a second wider glow so the contrast comes from the halo
rather than from more weight, keeping the line under the subagent lines'
3px. A working child is bright (.95) outside the reduced-motion block, so
turning motion off no longer also dims every worker's arc. Sibling nesting
6 -> 8px and the direction dot 3 -> 3.5px to match the heavier stroke.
Verified at 1:1 in a harness driving the real styles.css and the real
computeLineagePath over three layouts (adjacent workers, workers at the
far end of a full strip, wrapped two-row strip) on a dark and a light
skin. test/session-lineage-lines.test.ts pins both regressions.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
PR #282 added pi across the prominent surfaces but left the enumerations
that read as exhaustive: the env-prefix allowlist (missing PI_*), the
external-CLI list for stop/blocked, cron's agent types (also missing
antigravity), the narrow-strip mode list, and the claude-only caveats in the
cron and Read My Mind guides. Both READMEs and the four affected docs now agree
with the schema.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
SessionMode gains 'pi', a first-class backend alongside Claude Code,
OpenCode, Codex, Gemini and Antigravity: its own PTY, tmux session, rose
tab identity, welcome button, run-mode entry, cron agentType, Docker and
remote-SSH command defaults, and clone-repo Brain option.
Pi is a different shape of CLI from the other four, and three decisions
follow from that:
- It has NO permission prompts and no sandbox, so there is no
--dangerously-skip-permissions analog and none was invented. The
privilege-shaped knob is the tri-state approveProjectTrust, which makes
pi load and EXECUTE repo-local .pi/extensions TypeScript and install
missing project packages. clampExternalCliBypassForOwner() therefore
puts pi in the MATERIALIZE branch: a non-granted multi-user owner gets
--no-approve even when no config was sent, because pi's own default is
a prompt the session user could answer themselves. That helper had zero
test coverage; it now has coverage for all four CLIs.
- Only the PI_ prefix joins the env allowlist. Pi's ~34 provider key vars
share no prefix and ALLOWED_ENV_PREFIXES is one global list with no mode
context, so admitting them would widen the allowlist for every mode at
once. Auth goes through pi's /login or the server's own environment.
--api-key is deliberately never wired: it would put a provider secret on
the spawn command line.
- pi stays OUT of isAltScreenStripMode(). Its default TUI renders into the
main screen with terminal-owned scrollback, and its 0.84.0 fullscreen
mode is runtime-switchable via /settings; that flip was measured to put
the pane into the alt screen, which the strip would have corrupted.
pi-cli-resolver.ts additionally sanity-probes `pi --version` and requires
semver-shaped output, because `pi` is a short generic name a stray binary
can shadow; GET /api/pi/status surfaces path and version so a
misresolution is diagnosable rather than presenting as a broken mode.
Docker installs pi in its own --ignore-scripts step so that flag cannot
affect the other four CLIs, and seeds its credentials per-file rather than
whole-dir (~/.pi/agent also holds sessions, extensions and package trees).
Verified end to end against pi 0.84.1 on an isolated instance: resolver
search-dir fallback, flag construction, piConfig persistence across a full
server restart, the trust prompt and its --no-approve suppression, the
rose Run button on the default daylight-blue skin (the nested skin block
eats per-mode gradients unless the rule lives inside it), and the buffer
local-echo policy, which pi tolerates where codex did not.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Codeman maintainer