fix(terminal): #555 landing fixes

Comment and doc corrections that #555 made stale, no behaviour change.

- stock.ts: the grok and omp altScreen comments compared their strip to
  opencode's, which is now strip-mux-and-mouse rather than the narrow
  strip. Grok now says it shares antigravity's strip until measured, and
  omp drops opencode from its comparison.
- terminal-ui.js: the touch-tap comment named Claude/Codex/Gemini as the
  stripped modes, but the gate is now the cliMouseTracking flag alone and
  covers opencode too, so it names the two stripping flavours instead.
- src/types/session.ts: the cliMouseTracking JSDoc (the flag the browser
  now gates on exclusively) listed only claude/codex/gemini; it now names
  the strip-full and strip-mux-and-mouse modes, including opencode under
  tmux.
- src/session.ts: the usesMux getter doc now names isMuxMouseStripMode,
  since the replay strip passes usesMux to it as well.
- docs/architecture-invariants.md: the narrow-strip list gains
  grok/deepseek/omp (matching the PR's own CLAUDE.md line), the
  "must REMEMBER" heading covers both DECSET-stripping flavours, and the
  cliMouseTracking writer is described as the full-or-mouse branch it
  really is.
- docs/wiki/The-Dashboard.md: the user manual said every non-Claude CLI
  scrolls locally; opencode's wheel and swipes now page its conversation.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

docs/architecture-invariants.md

@@ -217,9 +217,9 @@ Further detail: the `<prefix>: <title>` form (`w3-myapp: fix the login redirect`
 
 ### Terminal scrollback: strip flavors and wheel/touch forwarding
 
-**Three strip flavors, one carry** (#205, `session.ts:_handleTerminalOutput`): the FULL strip (`isAltScreenStripMode` = codex/claude/gemini) removes alt-screen toggles, `3J`, and mouse-tracking DECSETs. The MOUSE strip (`isMuxMouseStripMode` = opencode) removes alt-screen toggles AND the mouse DECSETs but KEEPS `3J` — the middle case, for a mouse-capable full-screen TUI: its tracking DECSETs reach the browser (tmux `mouse off` passes the pane's modes through to the client), xterm obeys them, and then every DRAG is reported to the TUI instead of selecting text — so mark-and-copy silently did nothing (measured 62 `none` / 18 `any` over 16s, 5/5 dead drags while `any`) and the obvious fallback, Ctrl+C, is opencode's `app_exit`. `3J` stays because a TUI is not a `clear` consumer. Every other mode (shell/antigravity/pi) gets the NARROW strip (`isMuxAltScreenOnlyStripMode`) — alt-screen toggles ONLY — and only when tmux-backed (`useMux`). Rationale: the tmux CLIENT emits `smcup` as its first bytes at attach, before any program runs, parking xterm in the scrollback-less alternate buffer for the whole session (touch scrolling no-ops; xterm's own wheel handler converts the wheel to Up/Down arrows = readline history cycling — both #205 symptoms). tmux never forwards a pane program's alt-screen toggles to its client (it repaints instead; measured — vim/less inside a pane emit zero to the client), so the only thing the narrow strip ever removes is tmux's own smcup. It keeps `3J` (a user's `clear` is a deliberate scrollback wipe) and the mouse DECSETs (tmux passes those through even with `mouse off`; stripping them would break htop/vim mouse support — which is exactly why the mouse strip is opt-in per CLI and not part of the narrow flavour). ⚠️ The `useMux` gate is load-bearing: `startShell()`/`startInteractive()` fall back to a DIRECT PTY when mux creation fails, and there the inner program's own `?1049h` really does reach xterm — stripping it would break vim/less/htop for real. The replay path (`session-routes.ts`, via `session.usesMux`) applies the same three branches; the frontend gate (`_shouldReportMouseToCli()`) keeps no mode list at all: it reads only the published `cliMouseTracking`, which the server sets solely in the mouse-strip branch, so it can only be true for a mode whose DECSETs are stripped — the modes where the browser's hand-encoded tap (`_sendSyntheticSgrTap`) is the only way a click still reaches the CLI. Whichever modes the registry strips, the browser follows (pinned in `test/claude-scrollback-strip.test.ts`). The chunk-boundary carry (`_altScreenSeqCarry`) runs for all three flavors. Tests: `test/claude-scrollback-strip.test.ts`, `test/terminal-touch-tap.test.ts`.
+**Three strip flavors, one carry** (#205, `session.ts:_handleTerminalOutput`): the FULL strip (`isAltScreenStripMode` = codex/claude/gemini) removes alt-screen toggles, `3J`, and mouse-tracking DECSETs. The MOUSE strip (`isMuxMouseStripMode` = opencode) removes alt-screen toggles AND the mouse DECSETs but KEEPS `3J` — the middle case, for a mouse-capable full-screen TUI: its tracking DECSETs reach the browser (tmux `mouse off` passes the pane's modes through to the client), xterm obeys them, and then every DRAG is reported to the TUI instead of selecting text — so mark-and-copy silently did nothing (measured 62 `none` / 18 `any` over 16s, 5/5 dead drags while `any`) and the obvious fallback, Ctrl+C, is opencode's `app_exit`. `3J` stays because a TUI is not a `clear` consumer. Every other mode (shell/antigravity/pi/grok/deepseek/omp) gets the NARROW strip (`isMuxAltScreenOnlyStripMode`) — alt-screen toggles ONLY — and only when tmux-backed (`useMux`). Rationale: the tmux CLIENT emits `smcup` as its first bytes at attach, before any program runs, parking xterm in the scrollback-less alternate buffer for the whole session (touch scrolling no-ops; xterm's own wheel handler converts the wheel to Up/Down arrows = readline history cycling — both #205 symptoms). tmux never forwards a pane program's alt-screen toggles to its client (it repaints instead; measured — vim/less inside a pane emit zero to the client), so the only thing the narrow strip ever removes is tmux's own smcup. It keeps `3J` (a user's `clear` is a deliberate scrollback wipe) and the mouse DECSETs (tmux passes those through even with `mouse off`; stripping them would break htop/vim mouse support — which is exactly why the mouse strip is opt-in per CLI and not part of the narrow flavour). ⚠️ The `useMux` gate is load-bearing: `startShell()`/`startInteractive()` fall back to a DIRECT PTY when mux creation fails, and there the inner program's own `?1049h` really does reach xterm — stripping it would break vim/less/htop for real. The replay path (`session-routes.ts`, via `session.usesMux`) applies the same three branches; the frontend gate (`_shouldReportMouseToCli()`) keeps no mode list at all: it reads only the published `cliMouseTracking`, which the server sets solely in a DECSET-stripping branch (full or mouse), so it can only be true for a mode whose DECSETs are stripped — the modes where the browser's hand-encoded tap (`_sendSyntheticSgrTap`) is the only way a click still reaches the CLI. Whichever modes the registry strips, the browser follows (pinned in `test/claude-scrollback-strip.test.ts`). The chunk-boundary carry (`_altScreenSeqCarry`) runs for all three flavors. Tests: `test/claude-scrollback-strip.test.ts`, `test/terminal-touch-tap.test.ts`.
 
-⚠️ **What the full strip removes, it must REMEMBER.** Stripping the mouse DECSETs means xterm's `modes.mouseTrackingMode` is permanently `'none'` for those modes, so the browser hand-encodes click reports to compensate (`_sendSyntheticSgrTap`). With no state to consult it did that on EVERY click, which delivered mouse reports to programs that never asked for them: the same pane runs a plain shell whenever the CLI has exited or a `shell` was started inside a claude-mode session, and a shell prints the report as literal text (`[<0;88;20M`), garbling the next line typed. `_recordStrippedMouseMode()` therefore records each stripped sequence as it goes and publishes `cliMouseTracking` through `toState()`, and `_shouldReportMouseToCli()` requires it. ⚠️ Only the TRACKING modes count (1000/1001/1002/1003): 1005/1006 select an ENCODING and 1007 is alt-scroll, and counting those would put the stray reports straight back. ⚠️ The change broadcasts IMMEDIATELY rather than through `broadcastSessionStateDebounced`, because the flag flips when a dialog opens and the user can click that dialog inside the 500ms debounce window. Measured on a live claude 2.x: the CLI holds a tracking mode on continuously in fullscreen (so clicks keep being reported exactly as before; the default inline renderer holds none, measured on 2.1.283 even with `/model` open), while a bash prompt in the same stripped mode reports nothing. Fails toward silence: after a server restart the flag is false until the CLI re-emits, which tmux does at client attach.
+⚠️ **What a mouse-DECSET strip (full or mouse) removes, it must REMEMBER.** Stripping the mouse DECSETs means xterm's `modes.mouseTrackingMode` is permanently `'none'` for those modes, so the browser hand-encodes click reports to compensate (`_sendSyntheticSgrTap`). With no state to consult it did that on EVERY click, which delivered mouse reports to programs that never asked for them: the same pane runs a plain shell whenever the CLI has exited or a `shell` was started inside a claude-mode session, and a shell prints the report as literal text (`[<0;88;20M`), garbling the next line typed. `_recordStrippedMouseMode()` therefore records each stripped sequence as it goes and publishes `cliMouseTracking` through `toState()`, and `_shouldReportMouseToCli()` requires it. ⚠️ Only the TRACKING modes count (1000/1001/1002/1003): 1005/1006 select an ENCODING and 1007 is alt-scroll, and counting those would put the stray reports straight back. ⚠️ The change broadcasts IMMEDIATELY rather than through `broadcastSessionStateDebounced`, because the flag flips when a dialog opens and the user can click that dialog inside the 500ms debounce window. Measured on a live claude 2.x: the CLI holds a tracking mode on continuously in fullscreen (so clicks keep being reported exactly as before; the default inline renderer holds none, measured on 2.1.283 even with `/model` open), while a bash prompt in the same stripped mode reports nothing. Fails toward silence: after a server restart the flag is false until the CLI re-emits, which tmux does at client attach.
 
 **Only claude ≥ 2.1.187 with mouse tracking on forwards the wheel; everything else scrolls local scrollback** (#227 follow-up, `terminal-ui.js:_shouldForwardWheelToApp`). Codex was in the forward list until a reporter hit a completely dead wheel in codex tabs while the scrollbar drag worked. Measured against codex-cli 0.147.0 in a bare tmux: it never enables mouse tracking (`mouse_any_flag=0`) and SGR wheel reports fed to its PTY change nothing on screen, because it runs an INLINE viewport (`alternate_on=0`) and pushes its transcript into the terminal's own scrollback (tmux `history_size` grows) instead of paging in-app. So for codex, local scrollback IS the transcript and forwarding swallowed every tick. Claude repeats this exactly in its default INLINE renderer (measured on 2.1.280: `alternate_on=0`, `mouse_any_flag=0`, `history_size` grows), and swipes on iOS Safari were dead there while codex scrolled; only fullscreen claude (`CLAUDE_CODE_NO_FLICKER=1` or `"tui": "fullscreen"` in `~/.claude/settings.json`: alt screen plus modes 1003/1006) pages its transcript on wheel reports. So claude forwards only while the server-observed `cliMouseTracking` flag is true; a stale-false flag after a server restart falls through to the PageUp/PageDown fallback, never a dead wheel. ⚠️ "The TUI is a strip mode" is NOT evidence that it consumes wheel reports — verify with a real `\x1b[<64;c;rM` write into a live pane before adding a mode here. Hand-encoded SGR TAPS are gated by `_shouldReportMouseToCli()` (the server-observed `cliMouseTracking` flag, recorded by `_recordStrippedMouseMode` in session.ts as it strips, so only ever true for a stripped mode): codex never enables mouse tracking, so since #325 no tap report is sent there at all — click-to-position was already a measured no-op in codex, and a pane that has fallen back to a shell no longer receives `[<0;88;20M` junk.